Low GPU Usage with 780 Ti (Adaptive to whats being rendered)

Received this card 2 days ago, and have been trying to fix this issue since I got it. In games, the GPU usage is never consistent, and will stay the same if I'm not moving or looking around. Turning around by say 45 degrees will cause the GPU usage to change to something different. My friend also purchased a 780 Ti a few days ago, but from Gigabyte. His GPU usage during games is always around 100%. His performance is amazing because of it, while mine can be pretty bad at times.
I've already tried a lot of different things to try and fix it, but nothing has worked so far. Here's a list of some of the things I've already tried.
1 Updated BIOS, and disabled any power saving settings.
2 Used K-Boost, and then disabled it.
3 Set NCP 3d settings to prefer maximum performance.
4 Used Nvidia's Inspector tool to manually change those options again.
5 Tried giving it a higher power percentage.
6 Switched the power cables for different ones.
7 Switched it to a different PCI slot.
8 Disabled all software for startup.
9 Gone through and made sure AMD files were completely gone.
10 Forced constant voltage using MSI Afterburner.
11 Disconnected my second monitor.
Basic Specs
i7 4770k
MSI 780 Ti Twin Frozr
Rosewill 1300 Watt PSU 80+ Gold
16GB DDR3 (8x2)
Asus Z87 Sabertooth (Latest BIOS of course)
Windows 7 (With all of the updates)
Speccy snapshot speccy.piriform.com/results/b0TPCnyCvUgRnbZBwwJMc3d
GPU usage from flying around in Battlefield 4. i.imgur.com/qWRzWvi.jpg
Can't seem to actually link those, so copy and paste them.

Okay. so I toke the benchmark with the following results:
I noticed (as you can see) my fps dropped sometimes when it changed scenes..
And during the benchmark, the usage was at 99% for the most...
The game I am currently playing is Arma 3... Which has the low gpu/cpu usage..
And thanks a lot for your quick answer!

Similar Messages

MSI r7970 lightning low gpu usage.

Hi guys. I play battlefield 4 and i have low gpu usage, around 60-70%. With low usage i have low fps. I thought it is CPU problem, but i think it shouldn't be, because it is i5 2500k clocked at 4.2Ghz. Can someone help or it is maybe driver/game bug or something.

I use latest beta. I remembered i didn't Intel inf drivers after reinstalling my windows few days ago , i might try that now.
Edit: I installed all new drivers and all i could think of, but all the same. Usage too low.

Y40-70 Low GPU usage and laggy in GTA5 under Windows 10

By using the newest AMD 15.7.1 driver on AMD R9 M275 video card, GTA5 have steady fps when the scene does not change or changing slowly, but it gets laggy as hell when the scene change fast such as driving, like the fps would instant drop to 8~15 fps when the scene change fast and instand back above 30fps if you stop or slow down driving. from GPU-Z , it shown that the GPU load is very low, which is below 40% all the time. But under windows 8.1 with the AMD 15.7.1 driver , GTA5 wont lag with the same in game setting. besides the random GPU frequency drop under 400Mhz problem, GTA5 runs smooth in WIndow8.1 right now. Lenovo fix this annoying sht.

Okay. so I toke the benchmark with the following results:
I noticed (as you can see) my fps dropped sometimes when it changed scenes..
And during the benchmark, the usage was at 99% for the most...
The game I am currently playing is Arma 3... Which has the low gpu/cpu usage..
And thanks a lot for your quick answer!

GTx 770 twin frozr low gpu usage

Hey, i recently built a pc with msi gtx 770 twin frozr 2b and i noticed while playing games like league of legends, bioshock infinite, crysis 3, csgo,bf4, archeage and alot more my gpu usage drops even to 0 wich makes the game unplayable and also the gpu temp is like locked at 80c, wont go lower neither higher while playing games..
specs -
GPU - msi gtx 770 twin frozr 2gb oc (factory oc)
CPU - i7 4790k
RAM - 8 gb 1866mhz

Thank you very much for you'r help, i've posted on 3 forums and nobody answered me even after 2 days so finally i decided to post here .
Will my gpu get damaged or something if i'm not able to get new psu quickly? Built this pc recently so im kinda broke now. :/

6950 Twin Frozr III/PE, Low FPS, Low GPU usage

I could use some help, I've tried everything I can think of and no luck so far so maybe someone here can help. I spent all weekend trying to fix it with no luck.
I am having issues with my MSI 6950 Twin Frozr III/Power Edition cards. When playing a games my GPU usage never seems to get above 50%. I've tried each card individually and in crossfire but it never seems to make a difference. My frame rates fluctuate between 70 and 20 FPS while the GPU load fluctuates between 30-50%. Crossfire or not the frame rates and GPU usage stays about the same, never using more than 60% of the GPU. I only recently began seeing issues but I don't remember exactly when it started.
Hardware tried:
MSI 6950 Twin Frozr III/Power Edition (not flashed to 6970)
AMD Phenom II x6 1090T @4.0GHz
MSI 890FXA-GD70
16GB Mushkin DDR3 1600
Mushkin SATA III SSD
NZXT HALE90 850W PSU
14x FN 120RB 120mm fans
Aquacomputer Airplex Radiator with built in D5 Pump
i7-2600K @4.6GHz
ASUS P8P67 Pro
16GB Corsair DDR3 1600
OCZ Vertex 3 SSD
SeaSonic X750 Gold 750W
Corsair H60
Things I've tried (tried with both cards individually and in crossfire with no change, and in both systems, and various combinations)
-Current Drivers 12.10
-Rolling drivers back to 11.11
-Beta 12.11 Drivers
-Set constant voltage in Afterburner (heard that was causing conflict problems between Afterburner and CCC)
-Tried switching the cards between my 1090T @4.0GHz and my i7-2600K @4.6GHz and no change (both CPUs stay at around 60-70% so I dont think thats the bottleneck)
-Set power tune to +20%
-Tried clean install of windows 7 and no change
-Checked both PSUs with tester and both check out fine (not sure if the load is too much for them though)
Games that I've tried (with issues):
-Borderlands 2
-Hawken
-Dishonord
-Skyrim
-Dirt 3
-Saints Row 3
-Need for Speed: Most Wanted (always been bad but doesn't seem to be made any worse like the others)
I'm getting very discouraged and really hoping my graphics cards aren't going bad (they are only a year old). Any help is greatly appreciated.

can you test either of the card in another PC?
have you tried to turn off the vsync?

New MSI 670 PE GTX low GPU usage

Just got my MSI 670 PE from newegg yesterday. Doing some tests on 3dmark vantage in performance preset ( default that every bench uses) and my GPU usage drops to 40%, quite often, especially during intense graphic areas. It also does this in other games as well -- Crysis 2, Bf3.
I watched some youtube videos of others with this card and they did not have these issues.
Using MSI afterburner for OSD. 310.90 Drivers (tried 310.70 as well).
Could i have received a faulty card? Might I be having a CPU bottleneck? My CPU is a Athlon 2 x4 640 @ 3ghz. MSI 870-g45 motherboard, 4gb 1600 ram.
Thanks.

http://www.3dmark.com/3dmv/4522414?loginkey=u9Kmo3yZ4th3up_jo-TwyA
This is my 3dmark vantage score with my current system. See any issues?

MSI GTX 770 Gaming TF4 low gpu usage problem

Board: Asus X79 Deluxe
Bios: Version 0506
VGA: MSI 770GTX Gaming 2GB TF4
PSU: Seasonic 760w Platinum
Intel Core I7 4930k
MEM: Kingston Predator 16gb (4x4) 1.65v 2400mhz
HDD: Samsung PRO 256gb SSD
COOLER: Noctua NHD14
OC: (Turbo)4.4Ghz 1.28CPUV ram: 2133 Mhz 1.55v
OS: Windows 7 64bit Ultimate
I bought MSI 770GTX Gaming 2GB few months ago. Now i`m playing Crysis 3 and occasionally my GPU usage drops to 45%-50%. It happends on same places, like in first scene when climbing up the stairs. I go up, GPU Usage drops to 45% for 1-2 scs and stuff like that. Now I wonder is anyone else experiencing same symptoms, and what can I do to solve this problem? I`m using latest drivers, 331.82. I registered my card, and updated BIOS from your support site. Temperatures are <70c, nowhere near power limit so that can`t be causing low gpu drops. I did fresh Windows install but it didn`t help. Didn`t try older drivers yet.

I have the same card and had a lot of similar issues to this especially in crisis 3.
I seemed to resolve the issues by removing the Nvidia audio drivers and the MSI gaming app, then I reinstalled the NVidia drivers as a clean install without the audio driver. I didn't reinstall the gaming app as when I did the issue comes back

MSI R9 270X HAWK low GPU usage and screen flickering problem

I bought an MSI R9 270X HAWK vga and I have this screen flickering issue.
My S/N: 602-V303-02SB1310009419
I also had another problem: the GPU usage averages at 50-55% on every game (DX9,10,11 games like TESV Skyrim, League of Legends, Crysis 2-3, Battlefield 2-3, Far Cry 3) and never reaches more than 80%(well, once I made it run at 99%, I used ultra settings on Battlefield 4 with Sync on, Ultra preset settings with 200% res. scale so pretty much the maxed out Settings). I'm using this card with 8GB DDR3 Corsair Vengeance RAM with a stock clocked 1090T and AMD's reply for this problem was, that this problem can be driver problem as well as VBIOS.

I created a bootable usb, placed the files in it (formated, and only these files were at the usb, dos startup directed to win98boot's folder (C:\win98boot) renamed the tv303ms.134 to tv303ms.rom,l after i placed it on the usb and in the boot menu there are four additional options related to the USB (there's no USB only option): FDD, HDD, CDROM, zip. Selecting the FDD and CDROM starts the windows normally, The HDD option ended on the white-black screen, and there's where I can write: C:\>
after this i tried to type in: atiflash.exe TV303MS.rom [enter] nothing happened, then atiflash.exe [enter] and popped up some help instructions for the use of atiflash, I pressed enter over and over and then requested another command, I tiped in the tv303ms.rom [enter] and again nothing happened (invalid command I think). What should I do now ? I did some research but still can't figure out what the problem is. :/ (If I done everything correct, maybe the problem related to my motherboard or USB stick?)

GPU Issue with 2008 MacBook Pro - now what?

About a year ago, my MacBook Pro stopped working reliably after a few months of a flickering screen. I stopped using it, and switched to my iPad and iMac for everything. I'm now looking at things that would require a portable computer, so I got out the MacBook Pro and looked into getting it to work again.
I knew about the GPU issue before, but didn't realize that Apple had extended the repair options (mine would have been covered until May 2012). I'm fairly certain that the GPU is the cause of my problem, as it turns on but stops on the Apple boot screen.
Short of a logic board replacement, is there any solution? Has Apple been known to help anyone out past their repair period? Will baking the board fix the GPU, or is it done for?

Don't pay anyone to do this for you, there is a DIY way that works just as well. What most repairmen do is bake the logic board and melt the gpu back into place. There is a way that does this and all it requires is waiting:
1. Plug in your macbook pro (make sure that its off)
2. Turn on the computer, and hwen it chimes, close the lid and turn it updside down.
3. Wrap the macbook in a heavy quilt.
4. Let the computer sit for about an hour.
5. Take it out of the quilt, unplug it and let it cool for 20 minutes.
6. Turn on the computer.
I can say that this works as I had the same problem, and after this method, the computer is up and running, I'm typin this on it now!

Charge an X220 with the power adapter of a T530?

I have an X220 (which is, hands-down, the best laptop I've ever owned). My wife recently bought a T530 for herself. The power adapters appear to be roughly the same, though the T530 has a significantly larger brick. Are the two adapters compatible, or if I find myself running low on power with only her adapter available would it fry my machine?
Solved!
Go to Solution.

you can use a 65, 90 and 135 watts adapter with the X220. The T530 you got have a 90 watts adapter. The adapter is designed to only supply the current (voltage is fixed) and therefore the power only as needed by the machine. It is not constantly supplying 65, 90 or 135 watts, these are the rated maximum power.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Very low 3DMarks03 benchmark with MSI Ti4200TD 4x GPU

Very low 3DMarks03 benchmark with MSI Ti4200TD 4x GPU
I have download the lastest demo version of 3DMarks03 from futuremark.com and have downloaded the latest DirectX 9.0 from Microsoft.
After downloading both applications, I have update my DirectX 9.0 first before installin 3DMarks03 in my com.
After all installation is done, I have test the Benchmark for my AGP card which is MSI's Ti-4200TD 4x 128MB and the results was worse than expectations.
The first test was ok and I managed to hit rather high points of nearly 200fps for it, but the problems starts at the second test onwards... I managed to only hit at the highest point of 15fps only!!! Therefore at the end of the Test I only managed to score 1018points... ;( and my screen starts to flicker on occasions... but I have switched to 75Hz for my refresh rate... :O
And the very funny thing is that I have no problems driving games like Unreal Tournament 2003... ?(
My first query here is whether there's anything to do with DirectX 9.0(I have de-activate and re-activate directdraw after each restart) or is it because that I did not reinstall the Card driver as in Settings> Advanced Options> DirectX version still shows DirectX 8.1 or better... By the way, the driver was the latest version which I've download from MSI website and I have switch of SBA already...
My next query is whether because 3DMarks03 or DirectX 9.0 is not yet digitally signed as DxDiag has prompt me to get my drivers signed or DirectX 9.0 and 3Dmarks03 are not updated yet to run on nVidia based cards as I know that all Radeon 9500Pro/9700 series comes with direct 9.0 drivers and not for nVidia cards?
Hope someone could assist me... Thanks!!!
Intel Pentium 4 2.4B Ghz with SSE2 533FSB
Abit SA7 SIS 654D 533FSB
512MB DDR333 Kingston Ram
5 Fans cooler system
400watts PSU
Maxtor 80GB Fluid Bearing with 2MB Buffer 7200RPM HDD
Seagate 10.2GB 5400RPM HDD
SAMSUNG CDRW ROM
MSI DVD ROM
PCI 56kbps Modem
SAMSUNG SyncMaster 753DF 75Hz refresh
nVidia driver version: 6.13.10.4107
VGA BIOS version: 4.25.00.29.00
MSI Ti-4200DT 128MB 4x AGP
SBA: disabled
Anti-Aliasing: 2x
Anisotropic - Filitering Off
Performance: Balanced

I've load and install all my motherboard drivers, SIS AGP driver ver 1.4 since my last format and before the installation of DirectX 9.0 and 3DMarks03...
Do I have to reinstall everything again? ?(

Gpu usage.

Hello,
Unsure if i can or not. But i am looking to lower the gpu usage ingame on my 670 PE. As i can't even play WoW (other games too) without the gpu running at 99% usage and sounding like a jet engine. been trying to put up with it but alas. I'm almost at my limit. Only good thing coming out of this is that i never need my heating on when this baby is running at a constant 83c

@flobelix: proof?
I can proove my statement. In many games whenever I turn on V-sync and the game is higher than 60 FPS (for example - World of Tanks, average 75-80 FPS = 80% GPU usage - after turning VsyncOn: 50-60% GPU usage) it works.
So isn't it actually limiting GPU usage? Or what am I limiting? The readings are wrong? It's obvious that if You get higher FPS and u cap them Your card doesn't have to perform as hard as without the limit - it's a matter of frames it has to render. At least to me it is
Offcourse - if Your card can't perform >60FPS it won't work as intended.

GPU usage at high load

HI!
Is it normal for the GPU to be at high load when working with Premiere Pro? I understand the app uses GPU but even when idle, not doing anything, it won't drop. Premiere just constantly using GPU.
I uses OpenHWMonitor to see CPU and GPU usages. CPU has varying clock usage, depending what I'm doing in Premiere. But it's at stable 888MHz for my GTX 780 and 1114MHz with GTX 970. Those GPUs' core clocks are constant, no deltas, just fixed values at that speed. It got to a chassis temperature like when I'm playing heavy games. Has anyone checked? Is this normal?

Hello, I subscribed because I also want to share this too.
Yes high gpu load, no rest. Not max load but 3/4 load (idle too), max load only when render effects.
I also use Edius and usage is better because gpu rests when doing nothing unlike Premiere. Even games at loading screen or map or static the gpu have min load. No problem working with Premiere with this condition but bad for gpu life and other components long term.
In one hour use i measure gpu temp, premiere 70c and edius 50c. When render for 10min, premiere 75c edius 73c. The same for render but for working Premiere is bad, if you put electrical component at high temp all the time it will degrades.
Can you measure gpu vrm? I read vrm have even higher temp.

"Performance" problems with the File adapter on Plain J2SE Adapter Engine

Hi,
At the moment I'm on a customer side to solve some XI issues for a few days. One of the issues is the performance of the Plain J2SE Adapter Engine, using the file adapter to transfer XML messages(already XI message format) from the legacy system to the Integration Engine. The File adapter has to deal with "large" XML messages(max at the moment is 65 Mb) and the engine fails with the following error when transferring the big XML file: "ERROR: Finished sending to Integration Engine with error "java.lang.OutOfMemoryError". Skip confirmation and quit this loop".
As far I got the information from the customer the memory use of the Plain adapter engine is set to 512Mb. This is maybe to low. But I don't know where to look for this, I only have the adapter web interface in front of me, no access to the OS it self via for example remote connection.
On the Integration Engine I know there is the ability to split large message with the file adapter(File Content Conversion), but I don't know this for the Plain Adapter Engine. Is there a possibility to do this also on the Plain Adapter Engine?
Thanks in advance for any input.
Greetings,
Patrick

Hi Sameer,
Thanks for your answers.
On the first solution, yes that is possible, we first decided to see if the legacy system can do the splitting, before starting developing a Java program.
On the second solution, as far as I know is this solution possible on the Integration Engine. But we are facing the problems on the Plain J2SE Adapter Engine. I went trough that documentation(link:
http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm ), to look for I similiar solution in the Plain Adapter Engine. So my question is, is this possible with the Plain Adapter? And if so, what kind of parameters I need to use to achieve this.
Regards,
Patrick

MSI 770 TF 2GD5/OC cant display GPU usage

Hi everyone,
Programs like Afterburner and GPU-Z dont show the GPU usage from my 770,
it always stays at 0% wich obviously isnt right when im in-game etc..
Tried it with NVIDIA driver versions 320.49 and the new 326.19 beta,
and MSI Gaming App 1.0.0.2 and 1.0.0.3 installed, if that matters..
Could the card itself be faulty or something ?
I also have another problem, so i might aswell thow it in here if thats ok !?.. When my frames in BF3 drop just a littlebit fom 121(locked) to for example 108, it lags for a moment.
Does anybody have an idea what could cause that ? got an i5-3570K @ 4,3GHz

Aha, ok haven't seen that so far. I'm also hoping for continued Afterburner support as the App is far from being great and can crash the system or the driver when switching between the modes. As Afterbunrner is still quite popular and attracting a lot of people to decide for MSI vgas I also guess the app will just be added. For overclocking boost 2.0 cards it is at least quite useful as it limits the gpu's freedom to jump between boost clockrates a bit.

Low GPU Usage with 780 Ti (Adaptive to whats being rendered)

Similar Messages

Maybe you are looking for