Low Level VI for ELVIS

Where can I get the low level VIs for ELVIS functionalities not currently exposed in LabView eg for Bode Analyzer, Arbitrary WaveForm Generator

Hi Adnaan,
The lower level VI's are just as you list: DMM, FGEN, etc. I'm sorry the Bode Analyzer low level's are not available.
It looks like all of the controls for the BodeAnalyzer can be accessed from the block diagram, is this not the level of programatic control that you need?
The Express VI link was included in case you we're interested in how to create these.
Have a great weekend!
Best regards,
MatthewW
Applications Engineer
National Instruments
Message Edited by Matthew W on 09-28-2007 06:36 PM
Attachments:
bode_elvis.JPG ‏11 KB

Similar Messages

"Low-level" authorizations for accessing BW reports - add users to role

Using the advice in Topic "Low-level" authorizations for accessing BW reports, I have been able to publish a query to a role that has 3 test users and each user gets the same query but with different data, as determined in the tables.
Is there a way to look up the users and e-mail addresses from a table and associate them to the role? We have several hundred e-mail recipients that will not need BW access, but only need an e-mail with a static report that contains data on their own territories.

Hi!
i think programatically it might be complex. You got to maintain a seperate variant of report per user and use this variant to send mail. that means you need to maintain a variant and a Broadcast setting per user. once maintained you can use it any number of times the values will be recalculated everytime.
with regards
ashwin
<i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

How to disable Wifi and Network access in low level setting for security ?

Hi
New to here
One of our final customer bought imac last months. OS 10.9, SN is c02*******J4i
Since they are security printing, all the necessary ports accessing to outisdes need to be disabled in low level setting(not the ons just like turn on and off ).
The ports including USB storage, Network and WIFI.
I googled and found the following
Open the /System/Library/Extensions folder.
To remove support for USB mass storage devices, drag the following file to the Trash: IOUSBMassStorageClass.kext
Open Terminal and enter the following command: $ sudo touch /System/Library/Extensions The touch command changes the modified date of the /System/Library/Extensions folder. When the folder has a new modified date, the Extension cache files (located in /System/Library/) are deleted and rebuilt by Mac OS X.
Choose Finder > Secure Empty Trash to delete the file.
Restart the system.
I want to confirm this before sending to final user. Since I didn't have mac on hand, just wonder whether there are similar kext files for network and wifi to remove.
Just like step 2 described.
I would like customer to backup these files before permanently removed.
Many thanks
Kevin
<Edited By Host>

chiqui wrote:
Is it possible to disable Internet access point and WAP as when I use WiFi some connections to WAP server of my provider are still made and I get charged. I am looking for the option not to delete it entirely from the access point list, but rather disable it as I might need connection when WiFi is not available and I want to be able to enable it as once I delete the server name and setting I won't know it.
Is it possible to do it and how?
You could delete WAP accesspoint. Not all providers (carriers) allow this.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to create lower-level item for delivery with TO confirmation.

Hi Gurus,
I am writing batch to the delivery item after confirming the Transfer Order. According to the TO quantity, SAP splits the items and makes a "Lower-Level" item.
SAP does that splitting if the TO quantity is lower that the delivery item quantity.
What i want is that, i need SAP to create a lower-level item even if the TO corresponds the delivery quantity.
Is there a customizing for that?

That is a standard behavior where the line split occurs in the delivery when the delivery quantity is not equal to picked quantity. Since, the header line indicates the remainder of the quantity in case of short pick. This behavior also occurs when you are writing multiple batches despite the delivery quantity equals to the picking quantity.
Essentially, you'd see a single line when there a full pick and a single batch. If you still want to get this split then you can pick the batch in the delivery via 'batch split' (so that the line item is created) and then create a TO.

Low level format for a HDD MK6026GAX

Hello
I'm searching the software to do a low level format on my HDD toshiba MK6026GAX of 60Go. Is there someone to help me and tell me where I can find it please?
P.S:I'm not a good english speaker, so don't be too technical!
thx

Wait a moment. Is this a external or internal HDD???
Usually the HDD can be formatted during the OS installation on this HDD.
The Windows XP CD setup provides such option. Firstly the HDD would be formatted and then the OS would be installed.

Upper and lower level groups for pages

Is it possible to create different level groups for pages that show up in the navigation menu?

Your question is not that clear.
Are you talking about hidden pages? If so, yes it is possible. You would need to create your own navigation bar though. I did this on my first website by creating my own nav bar at the top of the page. I had a couple of extra pages that were not linked to the nav bar. I used Back and Next buttons on the other two pages to link them back.
When I re-designed my site, I increased the page size, so that I had room for two nav bars, one at the top of the page which is fixed and another at the side which changes as I add new things to the site.

"Low-level" authorizations for accessing BW reports

May I please have your attention for the following:
Each employee is represented by a costcenter in our R/3, and thus, BW-system.
Plan is as follows: by filling in the costcenter on the selection-screen of a BW-webreport on can see his/her own financial data for a certain (posting)period.
Is there a way to restrict access without creating separate users/roles/profiles for each costcenter??(we have a lot of potential users who only need to see the report but do not need access to BW itself (RSA1 etc)).
I'm thinking about some sort of mapping:
e.g. user SANTA logs on -> ABAP-program/function maps it to correct costcenter e.g. 1234 -> user is only authorized for this costcenter...
But is this possible and where to implement it??
Thanx a lot in advance for your hints!!!
Best regards,
Marco

Thanks al lot for your replies.
Corwin, I tried your solution and I've almost got it working....
1. made a table in DDIC to link username to costcenter
2. set up a reporting auth. via RSSM
3. created a variable (ZCOSTC) type 'Authorization' in the query designer
4. wrote some code in the user-exit (via SMOD) to fill this variable (translate username to costcenter via mentioned table)
5. created a role incl. authorization with reference to variable: value '$ZCOSTC'
This reference is not working unfortunately enough.
Everything works fine when I replace $ZCOSTC by an existing costcenter.
Am I forgetting something??
Thanx again!
Best regards,
Marco

Unable to View low level items for Phantom Assembly - Order created in APO

Hi All,
I am unable to view the sub items when I create planned orders in APO and production orders in ECC. But when the order for the same material is created in ECC, I can see all the sub items. I see that this issue is only for Phantom Assemblies.
And I cannot say that all the items in the Phantom do not appear, actually some of them do appear in BOM explosion.
For example:
Pld Ord is created for A in APO
Prd Ord for A is created in ECC
A has B, C and F as requirements
and B is phantom
B has D and F as requirements
Then my BOM explosion shows
..1 B
..2 D
..1 C
..2 D
..2 E
..1 F (This only gives the quantity required to make A)
But it should also list how much of F (..2 F) is required to make B.
Where as it comes up in ECC.
Do I need to change the material settings for Phantom or is it just the UOM that is creating an issue?

Hi All,
I am unable to view the sub items when I create planned orders in APO and production orders in ECC. But when the order for the same material is created in ECC, I can see all the sub items. I see that this issue is only for Phantom Assemblies.
And I cannot say that all the items in the Phantom do not appear, actually some of them do appear in BOM explosion.
For example:
Pld Ord is created for A in APO
Prd Ord for A is created in ECC
A has B, C and F as requirements
and B is phantom
B has D and F as requirements
Then my BOM explosion shows
..1 B
..2 D
..1 C
..2 D
..2 E
..1 F (This only gives the quantity required to make A)
But it should also list how much of F (..2 F) is required to make B.
Where as it comes up in ECC.
Do I need to change the material settings for Phantom or is it just the UOM that is creating an issue?

SNP - Issue with PDS as source of supply in low-level code run

Hi All:
I have a bunch of PDS that is giving me the following message when the SNP Low-level code is run:
''Invalid source 00000010382991380SLT1 S is not considered for low-level code calculation. The source of suppy 00000010382991380SLT1 S is available actively in the Supply Chain Model. The location product for which the source of supply is intended, does not exist, however, or is no longer assigned to the model. The source of supply is therefore invalid. ''
I tried all of the following but still did not get to work
1. Made sure that FG and all the active component of one FG and the location and the PDS were in an active model.
2. Made sure that there was one production version and hence one PDS
3. Intialiazed the Planning area with the version
But still would not generate the low level code for the product location. Can some one throw share some insight and help pl?
Thanks
Ryan

Could you please check whether in the Product Master, Procurement tab, the Procurement Type is set as "P - external procurement planning"? If yes, then that's the reason as the Low-Level Code is only calculated for Products that are to be planned in APO. In this case, change procurement type to X or E and it should work.
Regards,
Tiago

Collective Planned orders Scheduling for lower level orders with reference to the Superior order

Hi All,
Collective planned order scheduling.
I have been trying to reschedule the superior planned order and i was expecting the lower level planned orders to reschedule based on the superior planned order.
My problem is
when i try to reschedule the superior planned order the system is not rescheduling the lower level planned orders.
For example if i change the basic finish date of superior planned order as 30/09/2014 and reschedule the planned order it is only scheduling the header planned order and the lower level planned order is not scheduling.
Could some one tell me why this is not happenning at planned order level.
As the rescheduling of collective order will work at production order level but for some reason it is not happening at planned order level(as there is no option available to do so).
Please give your thoughts on this asap.
Mahee.

Hello Mahee
Please observe that your system is working as designed. Planned orders are scheduled independently, even when they are part of a network/collective order. Note 152319 explains the planned order scheduling in detail and it provides the following information:
* No scheduling of overall networks is executed although a directly manufactured component is assigned.
Note that no scheduling of the overall network is executed for planned orders. For the components requirements dates are determined. In order to cover them, planned orders are created in the next MRP run. Since the requirements are not managed using the exact time, the results of the planned order scheduling and of a scheduling of the overall network of the converted collective order can differ.
BR
Caetano

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and g

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

Placing a Low Level DB Function for Time Offset

Would any one be able to point me to any documentation on the Oracle 10g R2 release that might help me understand if there is a way to modify datetime query parameters and datetime query results at a low level in the DB? R12 of Oracle Apps does not handle global implementations very well when it comes to running 24/7 with sites around the globe and handling data stored with a time element. Everything is stored using the single server time zone. So I thought perhaps there might be a way to modify the DB at a low level to perform the offset of the value for any datetime parameter to correspond to the proper server time zone to pull data and then to also offset the queried datetime values to the users, via a session value, time zone. So I am thinking long shot but perhaps there is a way to insert a function call to a function built in C and linked in to the DB somehow or the DB listener or the DB connection driver software. I don't know. I am familiar with OCI and SQLCA but don't believe these offer this type of interjection with the DB I am looking for. Of course, if there is a simple solution I am all for that.
Thanks,
Jason

Adjusting the timezone at the session level doesn't do what I need it to do. At least based upon the tests I have done. And my research into changing the session DB time zone only applies to the new timestamp data types and not to the date data type.
However, if you think that changing the DB session time zone setting would help do what I have stated please tell me.
Thanks,
Jason

Exception Message for Lower Level

Hi everyone...
I get this message:
"Exception Message for Lower Level"
after of one MD02, for my FERT Material.
This FERT material has 2 lower levels, for a couple HALBs material in the next level and other HALB material into the level 3.
I don't get the requeriments for the HALBs materials, when I select the Order Report for the PlOrd.
This 3 materials are produced since level 3 up to level 1 into the same plant, therefore I need to see the requeriment of the Level 3 to produce and then, use it for the Level 2 and till the Level 1., but I'm recieving this message.
Thanks in advance.
OP

Hi,
Not quite understandable ur query
can u re-phrase it, anyways
as per my understanding
u are not getting plan orders for (HALB'S)
just check the stock for that HALB'S &
just execute CS11, CS12 for that header material & check
whether BOM is getting exploded or not (upto all levels)
Regards
kumar

Low-Level or High-Level for GUI ?

I am developing a MIDLet that has to run CLDC-1.1 MIDP-2.0 Devices. The MIDLet has a simple user interface, and there is no gaming. I developed the MIDLet using the high-level GUI class, but I discovered that this class is nice, yet limited. Now I am investigating using the low level canvas class for the GUI. Is it possible to maintain cross-platform compatibility with the canvas, or should I stick with the high-level class?

High Level Group
Classes provided are
     Perfect for development of MIDlets that target the maximum number of devices
     Heavily abstracted to provide minimal control over their look and feel
     Classes do not provide exact control over their display
Low Level Group
Classes provided are
     Perfect for MIDlets where we want precise control over the location and display of the UI elements
     If more control there is comes less portability It may not be deployable on certain devices
Cheers,
Rohan Chandane

Example using low level API POI for generating Excel??

Hi
is anyone know good URL that teaches generating Excel using low level API using Apache POI?
The reason is because i want to set the password for either workbook/sheet in high level API but it cant be done.
the only thing can be done using High level API is protect sheet without password.
Any idea?
Thanks

There is quite a good pack of documentation that ships with HSSF. To answer your question, I have just gone to the how to page and copied the example below, hope it helps.
short rownum;
// create a new file
FileOutputStream out = new FileOutputStream("workbook.xls");
// create a new workbook
HSSFWorkbook wb = new HSSFWorkbook();
// create a new sheet
HSSFSheet s = wb.createSheet();
// declare a row object reference
HSSFRow r = null;
// declare a cell object reference
HSSFCell c = null;
// create 3 cell styles
HSSFCellStyle cs = wb.createCellStyle();
HSSFCellStyle cs2 = wb.createCellStyle();
HSSFCellStyle cs3 = wb.createCellStyle();
HSSFDataFormat df = wb.createDataFormat();
// create 2 fonts objects
HSSFFont f = wb.createFont();
HSSFFont f2 = wb.createFont();
//set font 1 to 12 point type
f.setFontHeightInPoints((short) 12);
//make it blue
f.setColor( (short)0xc );
// make it bold
//arial is the default font
f.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
//set font 2 to 10 point type
f2.setFontHeightInPoints((short) 10);
//make it red
f2.setColor( (short)HSSFFont.COLOR_RED );
//make it bold
f2.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
f2.setStrikeout( true );
//set cell stlye
cs.setFont(f);
//set the cell format
cs.setDataFormat(df.getFormat("#,##0.0"));
//set a thin border
cs2.setBorderBottom(cs2.BORDER_THIN);
//fill w fg fill color
cs2.setFillPattern((short) HSSFCellStyle.SOLID_FOREGROUND);
//set the cell format to text see HSSFDataFormat for a full list
cs2.setDataFormat(HSSFDataFormat.getBuiltinFormat("text"));
// set the font
cs2.setFont(f2);
// set the sheet name in Unicode
wb.setSheetName(0, "\u0422\u0435\u0441\u0442\u043E\u0432\u0430\u044F " +
                   "\u0421\u0442\u0440\u0430\u043D\u0438\u0447\u043A\u0430",
                HSSFWorkbook.ENCODING_UTF_16 );
// in case of compressed Unicode
// wb.setSheetName(0, "HSSF Test", HSSFWorkbook.ENCODING_COMPRESSED_UNICODE );
// create a sheet with 30 rows (0-29)
for (rownum = (short) 0; rownum < 30; rownum++)
    // create a row
    r = s.createRow(rownum);
    // on every other row
    if ((rownum % 2) == 0)
        // make the row height bigger (in twips - 1/20 of a point)
        r.setHeight((short) 0x249);
    //r.setRowNum(( short ) rownum);
    // create 10 cells (0-9) (the += 2 becomes apparent later
    for (short cellnum = (short) 0; cellnum < 10; cellnum += 2)
        // create a numeric cell
        c = r.createCell(cellnum);
        // do some goofy math to demonstrate decimals
        c.setCellValue(rownum * 10000 + cellnum
                + (((double) rownum / 1000)
                + ((double) cellnum / 10000)));
        String cellValue;
        // create a string cell (see why += 2 in the
        c = r.createCell((short) (cellnum + 1));
        // on every other row
        if ((rownum % 2) == 0)
            // set this cell to the first cell style we defined
            c.setCellStyle(cs);
            // set the cell's string value to "Test"
            c.setEncoding( HSSFCell.ENCODING_COMPRESSED_UNICODE );
            c.setCellValue( "Test" );
        else
            c.setCellStyle(cs2);
            // set the cell's string value to "\u0422\u0435\u0441\u0442"
            c.setEncoding( HSSFCell.ENCODING_UTF_16 );
            c.setCellValue( "\u0422\u0435\u0441\u0442" );
        // make this column a bit wider
        s.setColumnWidth((short) (cellnum + 1), (short) ((50 * 8) / ((double) 1 / 20)));
//draw a thick black border on the row at the bottom using BLANKS
// advance 2 rows
rownum++;
rownum++;
r = s.createRow(rownum);
// define the third style to be the default
// except with a thick black border at the bottom
cs3.setBorderBottom(cs3.BORDER_THICK);
//create 50 cells
for (short cellnum = (short) 0; cellnum < 50; cellnum++)
    //create a blank type cell (no value)
    c = r.createCell(cellnum);
    // set it to the thick black border style
    c.setCellStyle(cs3);
//end draw thick black border
// demonstrate adding/naming and deleting a sheet
// create a sheet, set its title then delete it
s = wb.createSheet();
wb.setSheetName(1, "DeletedSheet");
wb.removeSheetAt(1);
//end deleted sheet
// write the workbook to the output stream
// close our file (don't blow out our file handles
wb.write(out);
out.close();

Low Level VI for ELVIS

Similar Messages

Maybe you are looking for