Low Memory when rendering a video file (Win 8.1; HP Envy 700-230qe)

Rendering a 4-minute video (with several video tracks) using Sony Vegas Pro13, keeps stopping around 70-80% of completion --- saying that there's low memory.
How could that happen on a HP Envy 700-230qe with 32GB DDR3 memory?
I look at the Task Manager: the "Commited" memory keeps increasing during the rendering until it hits the full number (36 GB in my case) and then the memory is depleted, which stops the render.
(No changes to the system except addition of an SSD drive as main drive, and a Blu-ray burner)
This question was solved.
View Solution.

Hello @Mango7
I understand that you are having issues with rendering a video using Sony Vegas Pro 13. I suggest you look to the Vegas Pro - Video as it would appear there are settings within the software that should help you. If you cannot find a post that matches what you are trying to do or the issue you are facing I suggest you post there as it would appear that their are numerous community members there that are willing to help.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

"File Error" and "Out of Memory" when rendering FCE

Dear all,
I imported a 2 hour holiday video into FCE.
When rendering the video, a message appears that the rendering process will last about 15 minutes to complete.
However, frequently I am warned by the following message:
"File Error: The specified file is open and in use by this or another application"
When activating Rendering again, the render time is now increased to about 45 minutes.
I now either receive a couple of times the message: "File Error: The specified file is open and in use by this or another application" >>or even worse: "Out of memory"<<.
Today I purchased an addition 2GB of memory to increase my memory form 750 MB to 2.5GB !!!
Can anyone please tell me what could be the cause of these messages and how to solve them?
BTW, no other programs are running while I use FCE.
Thanks in advance,
Hans E.<br>
PowerMac G5-Dual 1.8GHz, Memory 2.5GB, iMac G3-600MHz, Airport, Airport Express Mac OS X (10.3.9)
PowerMac G5-Dual 1.8GHz, Memory 2.5GB, iMac G3-600MHz, Airport, Airport Express Mac OS X (10.3.9)
PowerMac G5-Dual 1.8GHz, Memory 2.5GB, iMac G3-600MHz, Airport, Airport Express Mac OS X (10.3.9)

Is it happening when you're rendering, or exporting?
The error message means FCE is trying to rewrite a file that it is currently using. It could be mistakenly trying to save a render file, if you're only rendering, or if you're trying to re-export a file, you'll get that message.
Try dumping all your render files, restarting FCE and trying again.
The Out of Memory error almost always points toward a corrupt file. Could be a source file, could be a render file. Again, dump your render files and try again.
If these don't work, you need to close FCE, take all your source media offline, then open FCE. Now, reconnect each clip one by one until you find the corrupt clip. Keep going, there may be more than one. Re-capture the corrupt clips and you should be good to go.

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one
When I try to print a chart from Excel 2007 I get a low memory error. All other printing seems to work just fine. I thought it might be because of a color fill in the chart area so I removed the fill but I'm still getting the error.
I've also cleared the fax memory and run through the steps in http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00378226&prodT...
Running: Windows WP pro (SP3)
Printer: LaserJet 3015 all in one
Current driver: HP Lasetjet 3015 PCL 6
Running as a network printer using a D-Link DP301P

When an application is installed to the expansion card, that's the only place where you will see it in the app launcher screen, i.e. by selecting the card. It will not appear in the All category because that only shows apps which are installed to internal memory.
As for the Files application, yes, it only lets you browse contents of the card. For a more robust file management utility which will let you browse your entire phone, you might want to look into a freeware application called FileZ, which I believe is available at www.palmgear.com and other places.
I've never run Documents To Go from a card, but when you open Docs to Go and open the Menu > Options > Manage Applications, there is an option there to move applications to the Card. Never having done that, I'm not sure whether it moves the whole DTG app to a card but, give it a try.
I have oodles of applications and documents stored on my Centro's internal memory, and never have run up against a memory problem. At any time, you can check available memory by going to the application launcher (home) screen, opening the menu, and selecting Info.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Low memory when using programs like iPhoto, office at the same time I have 4 GB ram

low memory when using programs like iPhoto, office at the same time I have 4 GB memory ram 3000 graphics 384 mb

Do you have a question?

Why do I only get the audio when I play video files?

I only receive the audio portions when I play video files. The video is blank/black. This is happening with mpg., avchd and the videos posted to websites; YouTube, Facebook etc. The only video files I can play are windows media files. Windows media PLAYER won't play the other video files? I have the latest updates for my video card and adobe flash player. Thanks for any info! Elwood Windows 7 64 bit, i7 980x @333 6 core processor, 12 GB ram DDR 1600, Radeon 5850 GPU, OCZ Vertex 3 120GB SSD

It is most likely that the various files contain CODEC's, that are either not installed on your computer, or PrE is not able to use them.
You list several file types, and I would urge you to first see this FAQ Entry, then get one of the file info utilities, linked in it, G-Spot, MediaInfo, or MediaInspector, then post the details on the various CODEC's: http://forums.adobe.com/thread/440037?tstart=0
Also, that WMP cannot play the video indicates the likelihood of a CODEC issue.
Try either of the great, free media players, VLC Player, or MediaPlayer Classic HC. Both contain many useful CODEC's, but they do NOT install them into the OS.
Good luck, and with the CODEC info, someone can give your recommendations.
Hunt

Too much rendering of video files imported from iMovie

I am new to mac so maybe someone can help me out. I imported all my video to my hard drive from iMovie. When I use these files on FCE it always has to render, there is no sound. Just by putting a video clip on the timeline with no effects or anything, it always has to render and there is no sound. When i import video files from another hard drive imported from a different program and i drop it to the timeline, it doesnt have to render and i do hear the sound. How can i fix this?

Hello and welcome to the forum
Listen to Tom; he's one of the chief gurus and most frequent contributors to this forum! Here's how to export your iMovie footage so you can easily use it in FCE:
In iMovie, select Share>QuickTime and choose Expert Settings. On the next screen select Export: Movie to QuickTime Movie and click the Options button. In the resulting Movie Settings window, select DV/DVCPRO-NTSC for video compression and Linear PCM Stereo @48kHz for Sound Settings. Uncheck the Prepare for Internet Streaming box.
Realize that you'll be making an entirely new movie file, around 13GB per hour of standard def footage. Hope you have a big honker of a hard drive!
Good luck!

Adobe bridges crashes when opening a video file

Adobe bridges crashes when opening a video file. i can open and view photos but not .mov files or any other video file

Just that one project, or any project? Can you create new projects?

HT3775 I have a camera security system that when you save video files have either a mp4 or avi extension. Is there an application to open these files?

I have a camer security system that when you save video files have a mp4 or avi extension. Is there an application that I can open these files with?

Try VLC media player seems to play anything.
http://www.videolan.org/vlc/

Why does Premiere Pro CS5 eat up space on my C drive when it conforms video files?

Hey everyone. I have Premiere Pro CS5 with the latest update installed. I am running Windows 7 64-bit on a 120GB Corsair SSD drive. I have set my scratch disk video and audio previews to a different hard drive (F: drive). I have three questions:
1. Why does Premiere eat up space on my C drive whenever it conforms the video files I import into my project?
2. Where on my C drive can I find the folder that holds all these conformed video files that are taking up space on my C drive?
3. How do I prevent Premiere from eating up space on my hard drive when it conforms the video files I import into my project? Is there some way to move whatever folder is eating up space on my hard drive when Premiere conforms the video files and tell Premiere to conform the video files on another hard disk so I don't lose precious space on my C drive?
Okay, that's four questions but, can some please help me on this? Thanks.
Okay, that's five questions.

hello,
i think you need to relocate you media cache files to a separate drive other than your c: drive.
in the hardware forum, Harm has done a wonderful job at advising on HDD setup, i think it mentions relocation
of swap file, media cache, etc. all which are defaulted to your c: in your user profile
after relocating to different physical drives (all without partitions) performance usually increases
Generic Guideline for Disk Setup by harm
hope this helps til someone else answers more
good luck...
j

Windows 7 Crashes/Freezes when playing ANY Video files

lets see can anyone get their head around this one as it is driving me round the bend.
So... I have a media centre PC connected to my HDTV by VGA cable. I ran the PC on XP for a long time but last December, I upgraded it to Windows 7
along with my laptop.
Cue 5 months of seamless media usage and network integration - it
worked like a dream and I played both HD and SD content with ease.
About two weeks ago, I was watching an HD '.mkv' file in Windows Media Centre and about 10 minutes into the video, the video file just Froze - both the video and the audio. I had to power down and restart the machine and started the video file again. About
5 minutes after re-starting the video file, it hung again (not at the same place in the video). I then went and watched the video on my laptop where
it worked fine.
A few days after this (first time I had used it again since it hung up) I began watching an SD '.avi' file. About 1 minute into the video the display lost it's signal (the little built in 'no signal' graphic came up) and after a further 15 seconds, the audio
cut out as well.
This latter behaviour is now happening every single time I try to watch any kind of SD or HD video of any file extention. This problem is also independant of what video player I use (windows media centre and windows media player classic) After a minute or so
the display cuts out and the audio quickly follows it.
Suffice to say, I was a little annoyed but knowing a good bit about computers I
decided to try and solve the problem taking the following steps.
1) I uninstalled all my codecs and reinstalled the latest version of the K-Lite Codec pack. The latest version has support for windows 7 so I doubt its a compatibility issue here. After doing this the problem still persisted, exactly the same as before.
2) I checked the date of the drivers for my video card (MSI nVidia 6200) and seen that they were dated sept 2009. I went onto the nVidia site and found the latest win7 drivers dated april 2010 - I installed these but still the problem is there.
3) I then thought, maybe its a problem with the actual video card hardware itself. When I built my machine the parts supplier accidentally
sent me two of the same video card so I swapped out the existing one for a brand spanking new version of the same card. The problem is still EXACTLY the same.
So yes -I am rather annoyed and frustrated at the moment as I have absolutely no idea what is wrong with the machine and how it went from working to not working almost overnight.
I'd like to add also that the display is perfect when doing anything else on the computer - I can surf, play youtube videos, listen to music etc and it is absolutely no problem.
Put on a video and it cuts out the display like I have explained.
halp.

Hello Tim,
I decided to do a clean install, a fresh new installation of windows and all its updates, I didn't get the option of
install SP1 yet.
After that I only installed Catalyst drivers: 11.5 and Realtek HD audio drivers, all downloaded on May 24 2011.
Then latest FFDShow and MPC-HC to test, both x64 versions Nothing else installed.
Only a fresh copy of windows with its updates and those mentioned drivers.
To my surprise, it happened a gain.
It still crashes after a while when playing MKV videos.
It's weird, because it doesn't happen with avi's or mp4's.
So, there must be something wrong with one of windows updates that creates this windows FREEZE.
Also there is no possibility to find out what error it is in "Event Viewer" as nothing gets recorded there. Anyone could
advise?
Thanks

Premiere Pro CC crashes when browsing/importing video files.

I've got a trial version of Premiere Pro CC installed today, running on a late 2012 iMac.
No problems during splash screen or project startup, but when I try browsing for a video file in the import box or attempt to drag and drop files from my local disk, a Premiere prompt says a fatal error has occured and shuts down. I haven't experienced this problem on other PCs/Macs.
The files I've tried all run smoothly when opened by VLC or QuickTime. Extensions tried so far: .avi, .mkv, .3ggp.
NVIDIA GeForce GTX 680MX 2048 MB
3,2 GHz Intel Core i5
8 GB 1600 MHz DDR3
OS X 10.8.5 (12F45)
If there are codec issues, trial version limitations or these types of files are not supported I would hope PP would say so instead of crashing abruptly?
Any help appreciated, I'm not an editing guru.

Premiere does not have trial limitations.
If vlc plays the files is no garantee Premiere will.
Premiere does not support mkv.
Premiere only supports dv-avi and 3gp.

Quicktime crashes when opening any video file type.

Hi, I've been having this problem for quite a long time now. When attempting to open a quicktime file or any other type of video file, the program crashes. It does not report any sort of error message. I've updated both quicktime and windows. I've tried everything that has been suggested in prior posts and have yield no results. This is really irrating me. I don't want to have wasted money on this program and I need this for class. Any advice is appreciated, thank you.

The files I'm most concerned with playing are my animations exported from Final Cut and from another system's quicktime. These usually are quicktimes or .wma's that are either uncompressed or with a variety of compression, usually DV-NTSC, H.264, HDV 1080 60i, or mpeg4 for the web. But as I've professed before, it seem that the file type isn't necessarily factor. Any video file that should play in Quicktime does not and the program crashes. Upon this I get a very vague error message which reads "Quicktime Player has encountered a problem and needs to close. We are sorry for the inconvenience." That unfortunately is as much detail as I can give at the moment. I know this is a vague problem and that my information is just as vague, but that is all I have gathered. Anything is appreciated.

Bridge cs6 freezes when i select video files

Was hoping someone could help me solve this problem
I just installed CS6 master collection however am having a problem with bridge
even though bridge displays thumbnails of my avi files, every time i click on an avi file to select it bridge hangs/freezes and i have to force quit
this also happens when i select all in a folder that has avi files or other video files in it
it even happens when i select a folder that has a video file in it..it just hangs and stops responding
i still have bridge cs5 installed and it is displaying all files in folders perfectly including video files
the avi files are from my camera therefore they are really all around 1-3mins long
OS: Mac 10.6.8
i7
media stored on external hardrive firewire 8

i followed your instructions and after restarting bridge it actually let me select the folder with the video files...it displayed the first 19 preview extractions with their thumbnails in the content pane in less than a second
then it took 40 minutes to show the next 80 and with these there were no thumbnail preview files
it took at least a minute after clicking on a video file for bridge to select it and tho it did display the metadata there were no preview in the preview pane
after restarting bridge a second time..i encountered the same problem as before...inability to even select the folder with the avi files
i dont know if this will help but these 3 error messages appear everytime it hangs ( i don't understand what they mean but maybe you do)
5/01/13 3:21:32 PM            Adobe Bridge CS6[1097]            *** __NSAutoreleaseNoPool(): Object 0x107d04b30 of class NSCFNumber autoreleased with no pool in place - just leaking
5/01/13 3:21:46 PM            Adobe Bridge CS6[1097]            Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio, 262): no suitable image found. Did find:
            /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
5/01/13 3:21:46 PM            Adobe Bridge CS6[1097]            Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x11ed99aa0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
the other theory i have is maybe it has something to do with quicktime 10 player ?
thanx for all your help so far

Final_cut_pro-"Error: out of memory" when rendering with hidef clips

I keep getting this notice when rendering "error: out of memory." Both my external drive and internal drive have plenty of memory; 1.8TB and 101GB respectively. It makes no difference if I am rendering at full resolution or draft. I solved it for a while by clearing out some memory on my internal harddrive,
but now it is back. What is going on. This didn't happen when I was working with regular definition clips but now I am working with high def. What to do?

Drives don't have 'memory' in this context, they are storage containers.
Check my answer to your other thread and give us more info about your rig...Hardware/Software (models/versions), how everything's connected, exact specifications of the media you're working with and sequence settings.
K

Premiere cs5 crashing when I import video files

For video files, just about everytime, it crashes upon initial import. I have to restart the program and then it will be fine until like 10 min later where it happens again.
Sorry, a Serious error has occurred that requires Adobe Premiere Pro to shut down
something like that
I have:
6 gb Ram
1tb harddrive
quadcore processor
gtx285 nvidia
built in audio (HD)
Win 7 64bit Home Prem
Dave

>1tb harddrive
One hard drive is BARELY going to edit SD material
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Low Memory when rendering a video file (Win 8.1; HP Envy 700-230qe)

Similar Messages

Maybe you are looking for