Low output from idt codec

new h8-1360T w/win 7, low output from idt codec, adjust level to max and barely have one green bar, adjust through beats and same, no change, cannot record. Is it a Beats problem? help

If you have opened the Beats Control panel (right click on Beats on the TaskBar) and checked the Beats "Master Volume" to make sure it is not "off" or turned down all the way...
then
the issue may be a driver problem.
Two ways to try and deal with the Driver Issue (if that is what this is):
Method One:
Use the Recovery Manager to Reinstall your original IDT Audio Driver. The procedure is below:
Using Recovery Manager to Restore Software and Drivers (Windows 7)
Reboot and check...
=====================================================================================
Alternatively, if that does not seem to help, you can try the Driver version in your computer's website. This method is a bit more complicated, but it has the added advantage of "resetting" things in a way that the previous methiod does not attempt.
Note that the version of the IDT may be critical for your setup for some reason. This is why it is necessary to try the first method before jumping to this second method. The version of the IDT Audio in your Recovery Manager is the "original" version and it may be the one that makes your computer happy. You can always update if things go well and you want to experiment.
Method Two:
Download and save this file to your Downloads folder on your computer:
sp57492 IDT High Definition Audio Driver
Next:
Control Panel > icon view > open Programs and Features > right click on IDT Audio > Select Uninstall
Reboot the computer, and log in
Open the Downloads folder,
Right Click on the downloaded sp57492 installation package > "run as Administrator" > and start the installation
Complete the installation, following any instructions
Open the Speaker Icon (in Taskbar) > Playback Devices > Speakers and Headphones > Select "Set Default"
Check the sound levels...
Now, there are a variety of settings and such that ARE a part of the Beats setup, but the basics have to work before the Beats even enters into the equation.
====================================================================================
Finally:
It could be something that you can "fix" by setting:
Sound icon > Playback Devices > "Ehancements" > CHECK Loudness and Equalization > OK
I personally dislike this workaround. It is not a solution. It is a bandaid. Nonetheless, when all else fails... IF the enhancements setting is avialble (Windows 7), then it does work for folks...
====================================================================================
I hope this helps.
Kind Regards,
Dragon-Fur

Similar Messages

Lower than expected sound output from A100

Hi.
I have recently bought a Satellite A100 PSAA9E and have been pretty disappointed with the low sound output from it.
It's currently set to the highest volume level and is nowhere near the level I would expect.
Is this normal for this machine? All advice appreciated.
Thanks.

Hi
Well, its not easy to say what a low level is because its your own perception.
You know that the notebook speakers are not very powerful speakers because of the size and you can not compare it with other speakers.
But nevertheless; did you check also the settings in the control panel -- Sound and Audio devices?
There you can set the different sound controls to max. Maybe then you will notice a difference.

I would like to know the list of possible output (export) file codec from FCP X. For example, can I export in F4V or FLV format?

I would like to know the list of possible output (export) file codec from FCP X. For example, can I export in FLV format? Where do I find the list, which gives me all the details about it? Or is there only one output codec? Thanks

That's an excellent analogy. While FCP cannot export FLV. It is possible to do a very simple substitution. If you export a QuickTime movie using the .mov suffix with the H.264 codec, you can change it to FLV simply by changing the suffix to .flv. This is an acceptable format for Flash movies on most web sites, if that's where you're trying to go.

Very Low volume from headphone output on iMac

Since upgrading my 2011 27" iMac to Yosemite, the sound output from the headphone jack has plummeted, to a point where I can hardly hear it through my external speakers. Before, it was deafening, now it is almost inaudible. Airplay output and the internal speakers seem unaffected. I have restarted, zapped the PRAM, checked Audio MIDI Setup, checked Sound Prefs, everything is turned up to the max, to no effect.
Any idea what might be happening here?

I also experience the same problem with my MacBook Pro 13" last gen. I haven't used my iPod's earphone with it for some time. I have noticed this problem since yesterday (4/6/2010). Beside resetting PRAM, repairing disk and its permission, plug and unplug the head jack, tried with different earphones, check the Audio Midi Setup; I also deleted all audio plist files in /Library and ~/Library folders (incase those preference files are corrupted). Those efforts fail to solve the problem.
Is this a problem caused by 10.6.3? I never have a problem while still using 10.6.2.

I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

Hi, basically i have 3 sets of creative i-trigue 3400 purchase as second hand. All these 3 sets have some minor problem. I trust my ability i able to repair it as iam a professional electronic engineer. Just need some advance information or guidance from creative big brother and sister.
i do check with the controller everything, because i have 3 sets so i able to verified the problem.
1)subwoofer not output----Is it problem with amplifier or any transistor damage? How do i start checking and verified it?
2)right speaker low output compare with left speaker----I already analysis it and would like to know is it the transistor prolem? Please let me know so i can start with my repairing.
From what i know, this model seem like going to discord soon, so is it possible send me a partial schematic on the 3400 so i can repair. Please let me know and reply me, i am waiting your answer. Thank you

seem like nobody reply my email, can creative technical provide some guide. I already mention i will repair myself.:angry:

Trying to understand what are the parameter/output From debug SNMP timers

Hi All
I am trying to understand what are the parameter/output
From the debug SNMP timers
Output SNMP timers :
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 fired
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 rearmed, delay = 20000
70B54A70 , 632DDE28 ² what this number means.
5000 , 20000 ² why I have different delay time ( does it means that I have delay for SNMP request )

The debug messages you are seeing are related to High-Capacity (HC) timers, which manage updates to 64-bit (HC) snmp counters as defined in RFC2233.
The "fired" and "rearmed" messages indicate when each of these timers
updates ("fired") the HC snmp counters, and when they should fire next
(the "rearmed" messages). Higher speed interfaces require updates more often than lower speed interfaces, so you see two examples of that in your debug messages - 5000 ms updates vs 20000 ms update.
The numbers that are in the messages (i.e. 632DDE28 ) are internal references to the timer that has fired.
These messages do not indicate any delay in SNMP message processing, but normal SNMP operation of HC counters.

Facing challenges during creation of replica of .IDF file/Pdf output from 4.7 system into of Adobe forms in ECC 6.0 system

Facing challenges during creation of replica of .IDF file/Pdf output from 4.7 system into of Adobe forms in ECC 6.0 system.
If anybody has easy way to make those forms...
Please suggest...

Hi Shabeer,
the first thing is that you are running on a very very low RAM.
For ECC 6.0 with dual stack SAP System to run you should have atleast 4 GB of RAM.
For your Dispatcher issue kindly check the status of your Oracle database and the connection from SAP To Database.
You can check the oracle status using brtools utility.
Regards,
Prem

Poor Output from AME (Premiere 4)

I love Premiere, but I hate the Adobe Media Encoder. I think part of the problem may be that I am producing custom video for desktop and the web as opposed to media for DVD, Blu Ray, etc.
I am producing a series of short 16:9 Quicktime videos at a custom size from high-res progressive source files rendered in 3DS Max.
I have found that the Media encoder settings seem to be very restrictive with regard to bitrate settings, and that the best available quality when encoding to H.264, for example, is just plain crappy, and nowhere near as good as I can produce if I use the Sorenson Squeeze trial.
I think some codecs are just poorly implemented. Both of the Sorenson codecs can not be configured, and bitrate options are limited. The resulting video is horrible compared to the same result from the Sorenson encoder.
The animation codec for desktop QuickTime is just plain broken. even at the best quality settings, the output is full of noise and artifacts and is markedly inferior to the output from the video encoder in Max or even in the cheap little Camtasia screen recorder.
In order to get clean video in QuickTime format, I have tried every combination of codecs I can think of. I can't set the bitrate high enough with H.264 or most lossy codecs, and animation and graphics codecs are clearly broken. I seem to have to export huge files directly to component or raw output in order to get a high enough quality video.... and then, of course I have to find another tool to transcode that to something I can actually distribute.
What am I missing? I really want to use H.264. Is there a way to get at the deeper encoding options so I ca set up the VBR options and set a higher bitrate than the little slider on the options panel seems to allow?
What are other people doing? Are most people using a third party compression or encoding utility like Squeeze? If so, it sucks, because I didn't count on having to spend an additional 900 bucks on top of the cost of Adobe Master Collection.

ThreeDify,
Thanks for the info. I will try this out. I'm getting very discussed with AME. Yeah, there are lots of presets...but the output is terrible. Kinda like you find with having to use Squeeze. Am I missing something? There are posts all over the place that AME doesn't get it done so to speak. Where is Adobe addressing these issues?
Does AfterEffects use a different encoder? Why can I produce 'high quality' with AE and not with AME??? Yeah it takes longer to encode in AE but the final output is good. Hmmm.
My goal here is to render to 1280x720 and make it for presentation with my 'high power' computer. Then upload it to youtube HD. When I try to convert it to Youtube it looks like crap.
Question: What viewer do you use for .f4v files? I'm using Adobe Media Player, and the .f4v files I have already made don't look good at all.
I view with Quicktime and Windows Media Player. Get two different levels of quality with both. Same problem on the internet, IE8 doesn't view youtube videos as well as FireFox... Yes the delima goes on, and on, and on.........
I have got to get this to work..
I'm going to watch this thread for awhile. Hopefully others will share their successes.
Thanks.
Dave

Yesterday suddenly the sound output from my Headphone is not working

Hi, I've Mac Book Pro 15" with Retina display. Yesterday suddenly the sound output from my Headphone is not working. When I tried to solve this, I've noticed in system preferences it's jumping from Internal speakers to Head phone and vice versa. Can anyone help me on this issue please? I am using the original Apple Headset only.
Thanks
Babu
<Re-Titled By Host>

Tell us:
OS X version ?
What may have changed prior to the onset of the issue of "... suddenly... not working..." and " ... preferences ... jumping from ..." ? Software added, upgraded, updated?
what precidely do you mean by " ... preferences ... jumping from ..." ?
ÇÇÇ
EDITadded
I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " MacBook Pro " where it may get a more rapid response from your fellow users.
endEDIT

Getting 2650x1600 output from my MacBook Pro?

I've got a brand-new MacBook Pro 15-incher with the nVidia GT 330m card. I've also got a brand-new 30-inch HP ZR30w monitor with *native res. of 2560x1600*. My problem is that when I hook up the MacBook Pro to the monitor's DVI input, I can only get *1280x800 max resolution!* I have tried downloading SwitchResX, but it too only lists a 1280x800 max resolution for the ZR30w.
The monitor dutifully operates at 2560x1600 when hooked up to my PC, so I know it can do the job. I also can get 1080p output from the MacBook Pro on my TV.
So, how to I get the MacBook Pro to do what I bought it for? Very frustrating to be stuck at such a low resolution. THANKS IN ADVANCE!

I have a Dell UltraSharp 3007WFP 30" and I'm thinking about getting a Macbook Pro and this was on my mind since Ive read the specs on nVidia GT 330m card on the new Macbook Pro i3/5/7 series. So this is great to hear, what a relief plus this will be my first Mac so I don't know what to expect. I hear they will be new Macbook Pro's 1Q of 2011 with Facetime etc...can anyone confirm that? I'm on the fence right now if to get one or wait. I'm assuming the new Macbook Air would do the same since it has the same Video Card.
The new Dell UltraSharp U3011 30" has a display port for connectivity and wondering if one can juss connect to a Macbook Pro directly...mini display port / display port same thing?
@ArthurPJohnson ... once you go 2560 x 1600 there's no way one can ever go back to a lesser resolution LoL!

DDTS-100 low output

Can Creative help me on why I have a low output (volume near to max for both ) from my Altec Lansing 505R speakers connected to my PS2, Xbox n DVD(optical), Creative soundcard Audigy(coaxial) and TV, Creative soundcard Audigy(stereo) but when I connect stereo direct(stereo input) to my speakers with volume set mid, the speakers output is way louder n better. Is there something wrong with my DDTS-100? Adjusting the center, rear and subwoofer didn't make any difference for my output. Anybody have any comments on this. Thinking of sending it down to the Creative service centre for a check if there is no solution for this. Hope Creative can advise on this.
Message Edited by salmal on 04-20-2005 06:51 PM

I guess I should have done my homework before posting! I went to dolby.com and found that prologic II does not support the subwoofer output.. I guess this is for older systems that don't have one. It would have been nice if creative could have enabled the sub out though.. but it probobly is against dolby's rules. The good news is that all of my speakers are large, full range ones anyways. (the new dolby prologic IIx does support the subwoofer out, but the DDTS-00 doesn't support prologic IIx, go figure) Overall the unit seems like it will work ok for me... Oh, by the way, I plan on using it as the input for an older McIntosh tuner/pre-amp in my home theater, no computer or powered speakers involved. It has a 6 channel input, but no dolby digital decoder.. I hope it works for that, seems like it should. I just need the mini plug to RCA adapters, right?
Thanks, Ron

MuVo2 low output po

Hi!
I have a MuVo2 ,5 GB player, and I have a problem. I read an review on the Internet about my player, and they wrote that the MuVo2 player has one of the greatest output power. The guy who tetsed it, wrote that when you have the full volume (with the same headphones that I have) it's very hight, and I mean very high volume. On my player, the full volume is not high at all, so with some headphones the volume is high enought.
On Creatives homepage, you could read that the output power is 2 x 5 mW, and this is the same as it is on my brothers player (it's not a Creative), but his player can play much louder than my could, and the diffrence it's big.
A friend of mine, has I Creative Zen Micro, and this player should have the same output power as the MuVo2 ,5 GB. But also here, it's a big diffrence.
So, it had to be somthing wrong with my mp3-player. Anybody who has this problem?
/Johnny R.

The MuVo? series has an OK output as far as volume goes, but it is far from being the highest output of any mp3 player. If your volume though is decidedly low, then you could have European firmware which has a volume limitation. Under Settings | Information you can see your firmware revision. If it has an E on the end then it is the lower output firmware.
Visit www.nomadworld.com | downloads section and download and install the latest Non European firmware for your MuVo?.5.
If that is not the case, your headphones could be a high impedance which will lower the volume, or you could have a problem. Try the firmware check first though!
jake

Subwoofer output from ZS Notebook to Recie

Hi. I needed to boost my subwoofer's output from my soundcard to my reciever. The cable that I use to connect from my SB Audigy2 ZS Notebook to my Sony STR-DE898 is a Creative Labs Home Theater Cable with 8 RCA plugs. The subwoofer I use is from an Inspire T7700 and I'm using it as an acti've subwoofer, which connects from the Sony STR-DE898's subwoofer output to the RCA plug of a T7700 subwoofer marked Subwoofer in the back. Setting the volume to the max isn't a problem because I can adjust the bass level in the T7700's remote. I don't have the bass level at max (I set it to about 40% from hte minimum position) but when I go into Multi In mode in my reciever, I have to have the bass level at max but creates a hum. I can barely hear the subwoofer. Even turning on the Bass Redirection in my Speaker Settings doesn't help! Boosting the bass in Surround Mixer and increasing the 25Hz frequency in the EQ affects all the speakers so that's not an option. Any ideals? Any low-cost RCA-in->RCA-out amplifiers?out there which will boost my subwoofer output? The ZS Notebook will go through the amp to my Subwoofer In of my STR-DE898 reciever. Thanks.

You just saved me from starting a new post... exact same problem I'm having. Were you able to solve it?
Only difference for me is:
* Pioneer 7.1 receiver with 7.1 speakers, and it receives a PCM 2.0 channel signal from my mac mini late 2012. Can only hear sound out of L+R speakers
* I also only get 2 channels for video through XBMC, as well as iTunes music playback
If I change my midi setup to 2 channel instead of 8, I can change my audio settings on the receiver to acheive "multichannel", but still nothing coming out of the subwoofer. So I'm getting 7.0 not 7.1. But don't see why I need to resort to this if Mac OS and Mac mini claim they support multichannel audio through HDMI. And I too rely heavily on the subwoofer, so this work-around is useless to me.
Was just told to first try to reset the Mini (unplug for 30 secs) and PRAM reset (Command+Option+P+R). Will try that when I get home later today.

Low output audio level MBP Retina, 15-inch, Late 2013

All of a sudden I am getting very low level audio output from my speakers even when audio level is high, any suggestions please?

1.   System Preferences > Sound > Output > Internal Speakers/Headphone
       Settings for the selected device:
       Balance:
       Make sure that the slider is set at middle.
2.    AudioMIDI Setup
       Applications/Utilities/ Audio MIDI Setup.app
       Audio Devices window
       Side Bar
       Click the Built-in Output.
      Make sure that CH1 and CH2 volume sliders are matched.
3. Reset SMC and PRAM.
     Reset PRAM. http://support.apple.com/kb/PH4405
     Reset SMC.     http://support.apple.com/kb/HT3964
     Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Low output from idt codec

Similar Messages

Maybe you are looking for