Low quality corners when printing 3D from PhotoshopCC: How do I keep corners sharp when exporting to

I'm trying to export vector based art (letter outlines imported from Illustrator) to print 3D. Everything looks fine until I print for 3D, then the edges go soft - I get low polly count corners. Is there a way to sharpen these so they maintain their crispness?

Hi Duane,
Thanks for clarifying the hardware setup. Using the S-video connection from Hi8 to the DV converter is a good workflow. If you are showing a few errant lines at the bottom, that is a by-product of analog tape and please keep in mind that they are likely in the "overscan" area which normally does not show up to the TV viewer, though you see it in the edit software because you see the full overscan image edge-to-edge. So you probably don't have to worry about that, but if it bugs you, you can use the CROP effect to remove, or create a black title overlay to "hide" that stuff. As you said earlier, you can scale the whole picture up, but that is going to soften the image, not good.
As for shrinking the picture - this is only helpful when producing HD content (i.e Blu-ray) and mixing in some SD source material. I see this used on HD documentaries a lot. When they need to show some older SD footage, it is shown "actual size" over some sort of background. By showing the SD clip at actual size, it is not scaled at all and keeps it's quality on the HD display. If making a DVD, which is standard definition, then there is nothing to gain from this practice and it would in fact make things worse because you are reducing the resolution!
For a 75-minute project, I would use CBR 7.0 encoding to MPEG-2 for DVD.
Jeff Pulera
Safe Harbor Computers

Similar Messages

I uploaded a video from a flashdrive to my Mac and it compressed the video to lower quality and shrunk it in size. How do I get it to the original size?

I uploaded a video from a flashdrive to my Mac and it compressed the video to lower quality and shrunk it in size. How do I get it to the original size?

It changed the Aspect ratio of the video, as if it had been shot on a phone instead of a camera. When first looking at the footage it was in landscape aspect but when I transfered it to a memory unit to put on a different computer it uploaded it in a different ratio

HT203167 I 'm playing clash of clans ,wheen whene I bay from App store The operation is successful but whene I try to by pile of gems I get this maseg (your purchase could not be completed ) plz your advise

Dears ..
I 'm playing clash of clans ,wheen whene I bay from App store The operation is successful but whene I try to by pile of gems I get this maseg (your purchase could not be completed ) plz your advise
best Regards
<Email Edited by Host>

As these are public forums (most of us on here are fellow users) I've asked the hosts to remove your email address from your post.
If you are also getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (on these forums we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How can I keep the formatting when converting from Word to pages?

How can I keep the formatting when converting from Word to pages?

Use only formatting that is supported (in the same manner) in both applications. You'll need to find which that is through trial and error. Beyond those formatting options, you'll need to do some corrections, as Fruhulda suggests.
Regards,
Barry

How do I keep track of when a signal hits a certain voltage?

I am fairly new to Labview, and I am having trouble with the following. I am working on replacing a Digital Vector Filter with Labview software. I have a rotating shaft with eccentricities, which are measured by X and Y proximitors. Also, a keyphasor voltage keeps track of the rotation rate, which enables me to relate X and Y to each other. Essentially, I have to find when the keyphasor voltage hits -11 volts, and keep track of when that happens, then, keep track of the next time that happens, in order to get the time it takes for one revolution. I don't know if this makes a difference, but the data is coming in as dynamic data. I want to be able to tell the user what the rotational rate is as the program is running.

Thanks for the help!
I have taken the vi you gave me and changed it to a bit. The voltage going in is being sampled rather quickly, and thus there is no actual point that equals -11 Volts. I want to do something like the following: Check timer time, tm, and check:
if tm-1 > -11 Volts and tm < -11
do the following calculation to get the actual value time that voltage crosses -11 Volts, tk.
tk= (tm-1) + ( (tm- (tm-1) ) / ( Km - (Km-1) ) ) * (-11-(Km-1)), where Km is the voltage at tm.
I want to be able to do this streaming, to show the user what the tk value is live. The only times I really need to save are tm and tm-1, from there I can save all the tk's in an array for further analysis.
Please let me know if this is possible.
Thanks
Attachments:
keyphasordata.xls ‏1773 KB
Barebones.vi ‏90 KB

How can I keep my keywords when I export my pictures to a disc

How can I keep my keywords when I export my pictures to a burn disc. i am working in iphoto 8

margj
The keywords are written to the IPTC data of the file. The Finder doesn't read this but other photo apps will.
If you want to confirm the keywords, examine the pics with Graphic Coverter.
What are you trying to do here? Back up your Library?
Regards
TD

Poor Image Quality when Printing PDF from Office 07 using Acrobat 9 Pro Ext

Hi there,
Hoping to figure out why my images (jpegs, gifs, pngs, etc) seem to print in very poor quality when printing from Powerpoint and Word 2007?
When I actually print out the pdf onto paper, the images seem fine. The image quality is also good in Word and Excel
I did not have this problem using Office 2003 products.
Is this a common problem? I realize that the problem maybe Office related but any help or information appreciated.
Thanks

If the images' file format is PNG or TIFF you could play with the compression settings available in Acrobat's Preferences.
Edit > Preferences > select the Category "Convert to PDF".
In the"Converting To PDF" pane, select PNG or TIFF.
Then, click on the Edit Settings" button.
For either image format you could try one of the Lossless compression routines.
Be well...

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

PCL XL Error message when printing remotely from a Toshiba laptop to an HP LaserJet Pro CM1415fnw

This started today.
I am printing remotely from the laptop.
I am getting this error when printing from both Word and from Google Mail.
Printing to this printer from a different laptop works fine.
This printer is receiving faxes.
PCL XL Error
Subsystem: TEXT
Error: InternalError 0x50
File Name: cheettext.c
Line Number: 710

Hi @SuziG , aned welcome to the HP Forums!
I see you are experiencing PCL errors. I would like to help!
I would recommend downloading and utilizing the HP Universal PostScript Print Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Garbage text prints when printing documents from InDesign

I am encountering an odd error when printing from InDesign 4.0.4 (CS2) to some HP printers (HP 4650 and 2430n). Some documents print just fine with no problems. But a couple of documents will either never print, or when they do print, they print a line or few of garbage text (black diamonds, smiley faces, etc.) per page, plus some blank pages, and it will run through tons of paper when it does this.
I've found the following document which describes my problem pretty closely.
http://h10025.www1.hp.com/ewfrf/wc/genericDocument? docname=c00028613&cc=us&dlc=en&lc=en&jumpid=regR1002USEN
The problem is that I have set the Graphics to print as ASCII, and this problem still occurs. Could it be a problem with a particular EPS file printing or something? This document (with all of the included text, EPS images, etc) become fairly sizeable, such as 150 MB in size. The HP 4650 has 512 MB of memory, whereas the HP 2430 has 64 MB of memory.
I printed this same problem document from another computer, with all of the same settings in InDesign, and it printed with no problems.
Any idea on what is going on here?

Hello Chad,
Do you know if the two printers support PostScript? It sounds like they don't and therefore they will be using filters to convert the PS data from InDesign into a format that it understood by the printer. It will be in this conversion process that something will be going astray and that will cause the corrupted output. Try running a Repair Disk Permissions to see if this helps.
I don't believe the amount of RAM will cause the problem, it should only impact the speed at which the document can be spooled from the Mac. However, if the error is only occuring from InDesign and when working with large files, then it may have something to do with it. But if the other PC is okay then it may rule out the RAM. What print language is the other PC using to print to the HP's?
Regards,
Paul

Low quality images in web gallery from Output Module

So when I create a web gallery slideshow using the output module I get SUPER-low quality images, like big jagged, pixellated lines in place of any diagonal line in the pictures. However, only photos in the portrait orientation are affected by this problem. Landscape-oriented photos look perfectly normal, just smaller.
My first thought was that maybe the images were low quality in the web gallery preview but wouldn't be in the actual saved file, but alas I saved the index.html file and when I preview it in my web browser I get the same result with the portrait-oriented photos.
Any idea how to fix this? Other than only using landscape photos in my gallery of course!
Thanks!

The same problem here. I've noticed it just yesterday, but my Safari rendering is affected the same way.
I don't think it has anything to do with the recent updates. I reinstalled my MacOS X Leopard day ago and all the images (jpg, gif) have been somehow in lower quality ever since that moment. Even before I installed all new updates today.
The strangest think is, that it wasn't like this before the reinstallation. I used the same media, and I have, indeed, the same machine.
I'm hopeless. Have you already found some solution? Or anybody? Would be great...
Martin

Print is too small when I try to print something from online; how can I change the settings?

I need to enlarge the print when I print anything from online. Entirely too small. Does anyone know the answer?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? what browser and operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Paper jam when printing photo from Microsoft Photo Editor

On my C7280, I want to print a photo from Microsoft Photo Editor onto plain 8.5x11 paper. This always produces a paper jam. If I copy/paste the photo into, say, Word, and print from Word, the document prints properly.
This is not a "false paper jam" - the printer attempts to feed the paper, and jams (and creases) the paper in the attempt.
In Photo Editor, I explicitly chose "plain paper" and "main tray", rather than automatic settings.
Any help would be appreciated!

Hello @Lonewolf777 ,
Welcome to the HP forums.
I understand that you are getting paper jams when printing from your Android device.
I would like to help.
Have you tried to print using the HP ePrint app?
Also, if you are having problems using the in OS print system, install the HP Print Service Plug in.
It acts like a print driver for your phone.
If it is already installed, try the old, uninstall and reinstall trick.
Alternately, you can call the folks over at the HP Cloud Services department.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Canon MX860 get error 300 when printing wirelessly from MacBook Pro

I've been printing wirelessly for several years and most recently after an upgrade to OS X 10.10.1 Yosemite it was printing fine until this morning. Something changed and I get error 300 when I try to print. If I connect my MacBook to the Canon MX860 printer using the USB cord it prints fine so I'm assuming it's some sort of wireless connection issue. I powered down and up both the printer and the Macbook and still get the error. I tried the "Reset Printer System" from the System Preferences and now I can't add the printer back in. I tried using the CD that came with the printer to reinstall the wireless connection and the set-up program says it's incompatible with my operating system and refuses to run. Any assistance to help me print wirelessly again would be very much appreciated. Thank you.

After further investigation, we believe this is due to an intermittent modem problem and is not the fault of the printer or MacBook.

Turn off notes when printing PDF from preview?

How do you turn off the annotations when printing a PDF from Preview so that the annotation notes do not appear in the margin of the printed document? Is this possible? If not, it should be.
When a page has annotations preview automatically reformats the printed page so that the note appears alongside it. I would like to print it the normal side, without the annotations that I added. I don't mind if the little flag remains in the text to indicate that there is a note, but I can't figure how to turn off the function that reduces the page and switches the orientation.

The "Print" window that you open when printing contains various optional settings prior to proceeding with printing.

Low quality corners when printing 3D from PhotoshopCC: How do I keep corners sharp when exporting to

Similar Messages

Maybe you are looking for