Low quality Graphics when using 3G net

Hi. I set up my internet connection from my nokia using bluetooth, it has vadafone network. The problem is that all the graphics looks really low resolution. I asked vodafone if by any chance this is their fault but they told me it shouldnt be like this. Any ideas, please? Thanks.

Why are they saved as picts? I save mine as PNG and they look fine in Keynote. You could also use TIFF or PDF and those should look pretty good too. I think the problem is that other images scale much better than pict does.
If you want to try changing the format, instructions are here.
http://textsnippets.com/posts/show/131
Two tips, if you JUST need to capture a window (so that you can show JUST the area in the window of the tool you're working on) use appleshift4 to turn the cursor into a cross hair then mark off the area you want captured. Also, appleshift4 and THEN pressing space will turn the cursor into a camera so that you can capture the full window without worrying about missing any edges.

Similar Messages

Text converted to graphics when using shapes from iWork

I'm in the process of constructing a web site and want to have a site directory along the right side of each page. I started off using square text boxes and making room for the directory by using iWeb's text wrap, adding an inline transparent square to a conveniently located paragraph and resizing it as necessary. However, I found that sometimes depending on which object was selected when I uploaded the site the square seemed to cover up my link box - possibly even when it was sent to the back.
Then I learned that I could use shapes from Pages and edit them in iWeb, so I created a polygon with an opening for the site directory, and used it for my text box on each page. That worked great in that the directory was no longer behind the text box. However when I uploaded the web site, I eventually realized that my text boxes were all converted to graphics.
As a test I created a page identical to an existing page with a square used as a text box, and it reverts to being text.
Here's my web site if anyone wants to check it out - look at the main page and also at the Test Page reachable from the directory on the right.
http://web.mac.com/peterynh
A couple questions:
1. Does this mean that shapes created using the drawing tool in Pages that are made editable and then modified in iWeb will always produce graphics when used as text boxes? Is there any way around this?
2. Is the same a problem if shapes are created in other programs (e.g. Illustrator)?
3. Is there any other way I haven't thought of to create the same basic design which would preserve the text boxes as text?
Thanks for any help!,
Peter
PowerMac Dual G5, 2.3 GHz Mac OS X (10.4.5)

James - Thanks for the suggestions and ideas.
You know, I think it's possible to put a textbox
inside another text box......and in that fashion
still be able to wrap text in the main text box
around the interior text box. However, I am not sure
whether that will necessarily make all the text
converted into an image.
I tried that with interesting results. I couldn't resize the text box except through the Inspector for some reason. Once I pasted in the text, the box moved down below the site directory box to where there was room for a full-width text box; so it didn't accomplish the purpose.
About using iWeb's built-in text-wrap through adding an inline graphic:
This would work too...just make sure to select your
text box and click on the "Backward" button in order
to make sure that your main text box with the
transparent "placeholder" image is behind your
directory box that you want displayed. The same
thing can be achieved by selecting your directory box
and clicking "forward" so that it becomes the
frontmost element.
That makes sense. I tried that originally; maybe I wasn't careful about sending things to the front/back. The biggest problem is that if paragraphs don't line up with the site directory box, or if I edit text on the page, the text doesn't wrap very neatly around where I want it to. Otherwise this would be a good solution. I may end up doing this unless a better idea materializes, if such is even possible ...
Thanks for the suggestions. I'll be interested to see if any better ideas appear; if none do in the next couple days I may just declare the problem solved as well as possible until iWeb 2.0 appears.
Peter
PowerMac Dual G5, 2.3 GHz Mac OS X (10.4.5)

How to export low quality png while using exportToPNGSequence jsfl command ?

how export low quality png while using exportToPNGSequence jsfl command ?

var mat=fl.getDocumentDOM().library[0].matrix;
mat.a=.5;
mat.d=.5;
fl.getDocumentDOM().library[0].exportToPNGSequence(file:///yourfile.png,startframe,endfram e,mat);

Low quality graphics from screenshots

I did some full screen screen shots to use in Keynote (using apple + shift 3). These are pict files which look perfectly fine when I open them in preview. I then dragged and dropped them into Keynote, and both in preview mode and when I play the show, the graphics appear fuzzy and low quality - as if they are JPEGs converted to the lowest quality setting.
Any fix for this? Other than that KN works great and its easy to use. But these graphics are really bad.
[ Imac G5/ 20 in / 2 g ram : monitor at 1680x1050]

Why are they saved as picts? I save mine as PNG and they look fine in Keynote. You could also use TIFF or PDF and those should look pretty good too. I think the problem is that other images scale much better than pict does.
If you want to try changing the format, instructions are here.
http://textsnippets.com/posts/show/131
Two tips, if you JUST need to capture a window (so that you can show JUST the area in the window of the tool you're working on) use appleshift4 to turn the cursor into a cross hair then mark off the area you want captured. Also, appleshift4 and THEN pressing space will turn the cursor into a camera so that you can capture the full window without worrying about missing any edges.

Low quality from PrE12 using GoPro3 black footage

Hi there,
First post here. I have used PE8 many times in the past, so I kind of know what I am doing. However, I just got PE12 and I have been working on a project I shot with the GoPro hero 3+ Black edition, shooting in 1080p @ 60fps.Typically with PE8 I would convert the files to AVI before bringing them into the program, but with 12 it says MP4 is a native file type, so I skipped this step. I am experiencing a low quality playback in the editor, and I thought maybe my PC wasnt up to par anymore, or my playback settings were off, so I burned it to a DVD and played it on a TV and it was absolutely terrible. I wasn't given any options to a project setting like in PE8, and I read that PE12 does it for you. I went to the settings, but I was unable to change anything, so how can I make my high quality footage into a high quality final product?
In Edit>Project settings>general, it is AVCHD 1080p square pixel, 59.94fps,
Video, 1920x1080, 60fps Drop frame timecode
This all seems pretty normal to me, so is there something I am missing? Would I have better results if I did convert to AVI?
Thanks much in advance!

scottvtomt
What computer operating system is your Premiere Elements 12 running on?
If you have not already, please update from 12 to 12.1, using the opened project's Help Menu/Update.
With version 11 and 12, the program is designed so that the project takes over setting the project preset based on
the properties of the first video you drag to the Timeline. Sometimes it does it correctly, sometimes not. For the sometimes
not moments, then you set the project preset manually as described in the following link (File Menu/New/Project).
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Once the project preset is set, you can deduce the project settings in Edit Menu/Projects Settings/General, but there are no
significant changes you can make at that point.
If you say that your source was 1920 x 1080 @ 60 progressive frames per second, then your Edit Menu/Project Settings/General
reading would indicate that you or the project set the project preset correctly. When you dragged the file to the Timeline for the
first time was there an orange line over its content - or rather no colored line? For now, I am assuming no colored line.
Right click the Edit area monitor, select Playback Quality, and then Highest. What is the quality of your video at this point when viewed
in the Edit area monitor?
Go to Publish+Share/Computer/AVCHD and set Presets + MP4 - H.264 1920 x 1080p30.
Then under the Advanced Button/Video Tab of that preset, customize the export settings for 1080p60, using the following settings
exactly as shown.
What does that AVCHD.mp4 (1080p60) look like on your computer player(s)?
We will be watching for your results.
Pending further results from you, on hold are questions about your computer resources, your video card/graphics card, Administrator setup,
QuickTime install, etc.
Thanks.
ATR

Video quality deteriorates when using title tool or color.

hi there, I'm currently editing a HD project in FCE 4,0,1. All goes well, except when I use the title tool (lower thirds) or when I use color to adjust a certain shot. When using color, the movements begin to jitter. When using the title tool, the video in the background + the title itself becomes pixelated, meaning that the quality drops far below the original HD quality. The bad quality remains when exporting the movie. When I move the title just a tiny bit, the quality goes back to regular HD, but when I render it, it goes back to inferior video. Any ideas, suggestions, insights, ... ? Thank you

Hi(Bonjour)!
Welcome to the forum.
Did you render the timeline?
What are the original clip format/codec ?
See those links about titling in video/DV:
http://www.kenstone.net/fcphomepage/perfect_titlesphil.html
http://www.kenstone.net/fcphomepage/motion_text_in_fcpspencer.html
http://www.kenstone.net/fcphomepage/basic_photoshopfiles.html
http://www.kenstone.net/fcphomepage/basic_ps_stills_tofcp.html
http://www.kenstone.net/fcphomepage/basicps.html
http://www.kenstone.net/fcphomepage/livetypefundamentals.html
http://www.kenstone.net/fcphomepage/basic_textgenerators.html
http://www.kenstone.net/fcphomepage/basic_credit_rollstc.html
Michel Boissonneault

How to get lower-quality previews when working with Full-HD?

I'm working with Full-HD video, but I don't need preview (rendered) files to be 1920x1080 too. It takes a lot of disk space and a lot of time to render preview files.
Is there a way to have them some lower quality? For example 720x405 resolution would be enough.
But when I want to make a final export, I need to get Full-HD video.
Thanks!

Use a Custom sequence and change the previews as desired.

Very slow graphics when using AMD Radeon HD 6490M with Yosemite

I'm using a 15" MacBook Pro early 2011. When I switch to the GPU using gfxCardStatus (or because an app requires it), all graphics become very slow: window dragging, window miniaturize animation, moving the mouse in the menubar etc. 3D view in Maps.app is very slow. All is fine when using the integrated Intel HD 3000. I did not have this problem with Yosemite Developer Previews (I did not install the GMs), nor with Mavericks.
I tried using AMD kext from the DP, but things are worst (I suppose the kext are not loaded at all because the signature does not match).

Hi. I tried to do that with the same download package on my Pavilion DV6 CTO Quad edition and it fails to install the driver because of a conflict with the C++ Redistributable 2010 package build into the installer. Does anyone know if HP is going to update the switchable graphic drivers for Windows 8? They better!

Can get lower case letters when using bios

I purchased a used macbook air. Changed the user to me but never changed the old user password. I recently autorize an update and I can't get in without a password. I never changed the old user password and newer assigned a password to my name. Now I can't get in. I tried going to the bios but I only cant type upper case letters and no lower case letters. Can someone help me as to how I can type lower case letters when I start the bios?

Unfortunately this is often the case, particularly if the field is not properly identified as a password field, and is true for both Web pages as well as (poorly designed) BlackBery applications.
I've just gotten into the habit of typing the first letter of my password, then hitting the [Del] key, then typing in my full password all the time!
Jerry

I can't see any pictures or graphics when using firefox, I just get a broken file image. How do I fix it?

I can't see any icons or images when using Firefox. I can on other browsers on my apple laptop. How can I fix it?

*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Firefox > Preferences > Content: [X] Load images automatically
*Check the exceptions in "Firefox > Preferences > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) that can block images.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Low quality corners when printing 3D from PhotoshopCC: How do I keep corners sharp when exporting to

I'm trying to export vector based art (letter outlines imported from Illustrator) to print 3D. Everything looks fine until I print for 3D, then the edges go soft - I get low polly count corners. Is there a way to sharpen these so they maintain their crispness?

Hi Duane,
Thanks for clarifying the hardware setup. Using the S-video connection from Hi8 to the DV converter is a good workflow. If you are showing a few errant lines at the bottom, that is a by-product of analog tape and please keep in mind that they are likely in the "overscan" area which normally does not show up to the TV viewer, though you see it in the edit software because you see the full overscan image edge-to-edge. So you probably don't have to worry about that, but if it bugs you, you can use the CROP effect to remove, or create a black title overlay to "hide" that stuff. As you said earlier, you can scale the whole picture up, but that is going to soften the image, not good.
As for shrinking the picture - this is only helpful when producing HD content (i.e Blu-ray) and mixing in some SD source material. I see this used on HD documentaries a lot. When they need to show some older SD footage, it is shown "actual size" over some sort of background. By showing the SD clip at actual size, it is not scaled at all and keeps it's quality on the HD display. If making a DVD, which is standard definition, then there is nothing to gain from this practice and it would in fact make things worse because you are reducing the resolution!
For a 75-minute project, I would use CBR 7.0 encoding to MPEG-2 for DVD.
Jeff Pulera
Safe Harbor Computers

Image quality poor when using "fit in window" view

Hello,
i´m getting familiar with PS CS3 Demo and what buffles me is the poor quality of the downsized view of large images. I loaded a 8 MP JPEG image from a digital camera and it looks good in 100%, but when i choose to view the whole image to fit the window (33,33% in my case), the resulting "downsampled" image is very jaggy and pixelated. I use a freeware image viewer called Xnview that gives me a far superior view when viewing large images downsized - i can even choose to select a "HQ" mode so those images get resampled to look better. It it normal that PS does not offer such a thing (or did i not see it?) and delivers such poor visual quality or is there something wrong with my PC?
Thanks for your help.

Though 6.735, 12.5, 25 and 50% views usually are OK too. "Image quality" is great, though sometimes deceivingly so. I guess I don't understand sampling enough to tell you why 33% looks bad (rounding errors, I suppose). But 66% makes sense. You're trying to stuff 3 pixels into the space of 2.
Dave, what are the advantages to these nearest neighbor views instead of bicubic (or even bi-linear). Just speed?
J

Why does my MacBook Pro Retina screen display pixilated graphics when using the finder?

While this started just after the latest OS X update, each time I use the finder now to locate a graphic to upload, the graphic appears extremely pixelated. It does not matter which application I use to search and upload a graphic file, the graphic appears smaller and bleeds out. I just purchased the new Video Motion Pro video editing software, and every single graphic I upload to this application is pixelated. Has anyone else had any problems with their retina display after the last update?
Here are some examples of hi resolution graphics that now appear pixelated on my Retina screen:
http://www.screencast.com/t/dlxwi80x
http://www.screencast.com/t/WhG1h5dBh
If anyone is aware of an application or Apple software test that allows me to check my graphic card and retina display, please advise. I have performed multiple disk utility checks, restarts, etc., but nothing seems to help.
Any assistance would be greatly appreciated!
Thanks!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Low resolution AirPlay when using MacBook Pro but high when using iPad

I have a very strange issue. When I use Airplay from my iPad the image on the television is very clear and sharp, looking like a great HD picture. Wen I stream from my MacBook Pro, or mirror the screen, to the Apple TV the image degrades to a choppy, low-resolution, muddy version that looks terrible! It's strange because I have not had this issue before.
Anyone have any ideas on what is going on with this? Again, the image from the iPad is fine, the image from the MacBook Pro is low-resolution. Thanks in advance for any help you can offer.
- MayaAnim8or

Ike582 wrote:
Maya,
I just had a new TV, DVD, Apple TV et al installed today, and the installer told me that he generally sees better performance using Airplay from an iPad vs a Mac. As I began to play around with my device today, this was certainly true for me as well. No idea why.
Ike
But the OP said that it was not like that before.

Flash file stuck in a "low quality" mode when published to intranet

Hi All,
New to captivate..the issue I am having is that after
publishing to a flash file, I'd like to have others in my firm
review the course prior to it going live in our LMS. However, for
some reason the quality of the movie is very low, although I have
the html script (a little new to that as well) set to have the
quality=best. The worst areas are the caption boxes, the text looks
awful. The rest I can live with, however it makes our work look
horrible to our business partners.
Things I've done:
1) Loaded a Flash-sourced movie to the intranet to see if it
has the same quality issue. It doesn't.
2) Looked at the captivate published movie in the html file
captivate generated- it looks fine there.
Anyone else run across this issue? It seems to be something
with the way captivate publishes the file. Not sure though, I'm not
a programmer by any stretch.
Thanks,
Jason

Welcome to our community, Jason
From what you are describing, I am concluding that you are
perhaps simply sending the .SWF along via E-Mail for review?
If so, you need to know that if you do this, it will scale to
fit whatever the browser size is. And when that happens, the
quality will suffer. Exactly how much suffering occurs depends on
how much things are scaling.
The best approach is to upload the files to a web server or
to a network server. Then provide a link to the HTML page Captivate
created.
Cheers... Rick

Low quality Graphics when using 3G net

Similar Messages

Maybe you are looking for