Low res on u430 with some apps
Hi, just purchased a new u430 touch yesterday. Downloaded Google Chrome and noticed the resolution in Chrome was bad. It is blurry and only zooming in makes it better.
I didn't buy a new laptop in 1000$ with a full HD res just to play with the zoom all the time in order to enjoy it properly
Can anyone help me?
By the way, going into 'personalize' and playing with the 'display' didn't do the trick for Chrome
thanks in advance
Do you have the nVidia or Intel video card? I would recommend updating the video driver either way, Lenovo's drivers are old and buggy.
I have the US BestBuy version with intel 4400 card, 1600x900 screen and Chrome, Firefox and IE11 work just fine.
Similar Messages
-
Epson: No Duplex Scan with some apps form the mac store
Hallo everyone,
I have an problem with my epson scanner and some apps from the App Store.
My Epson Workforce 3540 can duplex scanning. With Image Capture this works. But with some apps from the appstore, witch uses self-scanning dialogs, and not the image capture dialog, it do not work. I can select duplex scan, the printer scans the first side, change the papger site, and scan the other side, but the application gets only the first side.
I tested one other printer and this worked.
I contact the developer, the said: We use standard apis from apple (ICDeviceBrowser, ICScannerDevice) and their is noch way make a failure. Then I contact Epson and they told me: Contact Apple!
Is this problem new? It must be a driver problem, or? Help!
Thanks,
NilsHallo everyone,
I have an problem with my epson scanner and some apps from the App Store.
My Epson Workforce 3540 can duplex scanning. With Image Capture this works. But with some apps from the appstore, witch uses self-scanning dialogs, and not the image capture dialog, it do not work. I can select duplex scan, the printer scans the first side, change the papger site, and scan the other side, but the application gets only the first side.
I tested one other printer and this worked.
I contact the developer, the said: We use standard apis from apple (ICDeviceBrowser, ICScannerDevice) and their is noch way make a failure. Then I contact Epson and they told me: Contact Apple!
Is this problem new? It must be a driver problem, or? Help!
Thanks,
Nils -
Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?
Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?
-
My sound only works through the ear phones with some apps....
With some apps (Games and books) I can only get sound on my IPAD 2 though the earphones...this just recently occured. With movies the sound goes through the speakers just fine. Is there some adjustment I can make so I can hear the games without using the ear phones?
Make sure that you haven't got notifications muted (which will affect most games, but not iPod or Videos apps, nor earphones). Depending on what you've got Settings > General > Use Side Switch To set to, notifications can either be muted by the switch on the right hand side of the iPad, or via the taskbar (the function that the switch isn't performing is on the task bar instead) : double-click the home button to bring up the task bar, slide the bar to the right, and it's the icon far left. There is more info about the switch and the task bar and the mute/rotation lock functions here http://support.apple.com/kb/HT4085
-
With some app (in.es filmon) sound doesnt work.
After updated Ipad2 to v 5.01, with some app (in.es filmon) sound does'nt work.
I have already restored tha Ipad bat the problem persist.
many thanks for hoelp.Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13What is the exact name of the application you're trying to launch? Is it in the Applications folder?
-
Why does my mic only work with some apps?
My mic suddenly stopped working in some apps. I can use it just fine with FaceTime and Skype. It does not work when I use my Phone, Siri, Safari, and Voice Memos. I did a full restore and have the latest version of iOS.
Please help!Sorry for bumping, but last night when I posted the site kept going down and acting wacky. :)
-
Speakers stop working with some apps
how can I fix this. some apps work fine and some apps stop working with speakers but work with earphones.
Hi everybody and Dadof2girls,
I just fixed my problem. I read a post from somebody that had this problem too and he said that in the update of the os this happens and the settings for the lock rotation button has to be set for sound now. That fixed the problem as this person said. -
Command key issues with some apps after highlighting with trackpad
When I attempt to use command-c to copy from Microsoft Office or Lotus Notes I often get nothing. I've gotten in the habit of pressing command-c 2 or 3 times to make sure I got it. Its not physical keyboard issue since I do not have this problem with other apps and I tested a BT keyboard as well. I've noticed that other command key sequences also get dropped, e.g. command-u for underline. I've also had the delete key get dropped. It feels like Office and Notes are just to slow to respond and somehow lose the key, this frequently happens after I highlight something and quickly press command-something.
I used tap to touch. If I tap tap drag tap then command-whatever it appears to work. But tap tap drag command-whatever does not appear to terminate the drag. Is there a way to make Office/Notes react faster? Or tune the touch pad? Hack OS/X?
Thanks.And after all is said and done, you may very well need to restore the device as new and start from the beginning again, especially if the glitch is contained in your previous backup. Restoring from that backup (if it contains the glitch) will also restore the glitch. This is the reason for possibly restoring as new.
Make note of all your Settings (write them all down, preferably using a PC/notepad type program), backup all your music & apps and any other important information you will lose by restoring as new. As far as text messages go, you may not be able to back those up manually (I believe you can but you'd need to purchase additional software for the PC/Mac) and will likely lose them. -
Sound does not work with some apps
Hi... With certain apps the sound disappears. For ex. playing Angry Birds....no sound, but speakers work well when i play any music from Itunes. Tried restoring IPAD and yet no luck. Any suggestions???
Have you got notifications muted ? Only notifications (including games) get muted, so the Music/iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
Dear all,
I'm experiencing some problems with apps after upgrading to 5.1, some of them just got stucked or not even start up. Is there a way of fixing this or downgrade to 5.0 ??
Thanksyou cannot downgrade, sorry.
-
Issues with some apps requiring administrative privileges after installing Mavericks
Hi everyone. After updating to Mavericks on my MacBook Pro, I have experienced the following inconveniences.
1) Dropbox keeps asking for my administrative password at every boot.
Quite annoying. Reinstalling the app didn't solve the issue. Instead, Finder integration seems now gone.
2) VirtualBox won't start.
The error message is "Effective UID is not root (euid=217 egid=20 uid=501 gid=20) (rc=-10). Please try reinstalling VirtualBox.".
Needless to say that uninstalling the app with the script and reinstalling it didn't solve anything.
3) XQuartz is also gone.
It keeps popping out with this error message: "The application X11 could not be opened. An error occurred while starting the X11 server: "Cannot establish any listening sockets - Make sure an X server isn't already running. Click Quit to quit X11. Click Report to see more details or send a report to Apple.".
If I hit "Quit", the message comes out after some seconds. I used XQuatz to run Inkscape, which I have now replaced with iDraw, but the issue is still annoying.
As far as I understand, the problem seems related with administrative privileges required by the apps. On my two other Macs (Mac Mini and iMac) things are fine, so I assume that somehow maybe some system files are messed up on the MBP. I ran a permission repair but it was useless. I searched the forums but it seems that nobody is experiencing the same troubles. I hope someone here may help me solve these issues without a fresh install. Any ideas?I think this may now well be a keychains issue.
Resetting your keychain in Mac OS X
http://support.apple.com/kb/TS1544?viewlocale=en_US
OS X: Keychain Access asks for keychain "login" after changing login password
http://support.apple.com/kb/HT1631?viewlocale=en_US
OS X Mavericks: Lock or unlock your keychain
http://support.apple.com/kb/PH13823?viewlocale=en_US
Open Keychain Access, which is in the Utilities folder within the Applications folder.
From the Keychain Access menu, choose Preferences.
Click General, then click Reset My Default Keychain.
Authenticate with your account login password.
Quit Keychain Access.
Restart your computer. -
Can't see my wish list n access my Account, anyting to do with some App I installed?
I have problem with my iTunes Account when I log in my Mac, couldn't see my wish list n access my Account.
but if I log out n log in as a guest user, my iTunes Account works normally.
I have a guess it might be the App I had installed.
anyone can help?you might want to check on this possibility:
No music shows up in iTunes after upgrading -
Two IPads one Account Problem with some apps
I have my Ipad2 and Ipad mini. For some reason when I try to download my upgrades from the apps Wow and Master FX, to my new Ipad Mini, I am asked to repurchase. I wrote to the Developer who said to uninstall and reinstall but no luck. I have been able to get upgrades purchased from other apps but not these. Any suggestions?
Did the first app download use the same Apple ID as what you are trying to use for the second app download?
Cheers, Tom -
Sound not working with some apps and websites
I don't get sound on some websites or apps like vine. Video is fine
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
iTunes compelled me to download the latest version, before I could complete a transaction (which, needless to say, was botched). I have Windows XP, and I cannot open iTunes now without freezing or crashing my computer. This is utterly frustrating, si
-
Can flash handle multiple screens?
hi people, need some advice please. I want to make an application that works on 2 screen. on screen1 I need to make GUI with several buttons, sliders, radio buttons, field for dynamic text on screen2 (big screen / LED / video projector) I want to out
-
I'm using a USB MXL .007 mic with Logic 8.0.2, and I can't get any sound output when my USB mic is selected as my Core Audio Device (I'm using it as an aggregate device I created per the instructions I've found on numerous posts). I can only get soun
-
From what I understand my BB only holds call logs for 30 days. I also know that I can forward a call log to an email address. What I want my BB to do is to send me an email for every call log (in out and missed with date time and duration) automatica
-
"Error Compiling movie: Unknown Error" message when rendering
I've read forums and tried several things but still getting this error message when I try to render footage on my timeline. I was copying footage from one sequence that had a "yellow" bar in the top part of the timeline window into another sequence a