Low resolution on my second minitor
I have a 27" 3.4GHz i7 iMac with 2Gb NVIDIA GTX 680MX video card. I tried to connect it with a Dell 30" minitor as a second display by using DVI cable. I used to use the Dell minitor for my PC and the resolution was 2560x1440 working perfectly. But when I connected it with the iMac which I think should have enough juice to run 2 minitors and the resolution on the Dell minitor only drop to 1280 x 800. The settings in OSX have only few options I can select but seems none of the selections can give me higher resolution. Can anyone help? Thanks!!
Give > Display Menu from the Mac App Store a shot.
Similar Messages
-
I'm guessing that my Powermac G5 Quad running 10.4.11 does support extended desktop. My present monitor is a 1600x1200. Can a second monitor of smaller size and lower resolution work as an extended desktop?
It should easily.
Power Mac G5: Display Compatibility
http://support.apple.com/kb/HT2707?viewlocale=en_US
Display Support:
Dual Displays*
Resolution Support:
2560x1600
Details:
Apple advertised that this system can support "two Apple flat-panel displays for each graphics card installed". The default graphics card can support "up to 2560 by 1600 pixels" with the dual-link DVI port and "up to 1920 by 1200 pixels" with the single-link DVI port. It also can support analog resolutions "up to 2048 by 1536 pixels".
http://www.everymac.com/systems/apple/powermac_g5/stats/powermac_g5_quad_2.5.htm l
"Quad Core" (2.5)
Video Card:
GeForce 6600
VRAM:
256 MB
Primary Max Resolution:
2560x1600
Secondary Max Resolution:
1920x1200
Display Connectors:
1 dual-link DVI
1 single-link DVI
http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-adc-ports-dvi- ports-resolutions-supported.html -
I am syncing photos from aperture 3 to my iphone, but many pictures are coming over to the iphone at horribly low resolution. I opened one such album and found of the 12 photos, only two looked good. The rest were a horrible example of compression artifacting, all the detail was lost and it was very muddy. The pictures looked out of focus. But the pictures looked fine in aperture, even when I had them being displayed at the same physical size on my mbp screen.
After doing some digging in the .applibrary I was able to find where the aperture thumbs and the synced photos were stored and discovered the pattern.
It appears that aperture thumbnails (for the bottom of split view, for example) are always created at 240x360. However, the pictures creates for itunes vary in size, and the size depends on the size of the original. One image original was 426x640 and its iphone image was 213x320 (14k) and looked ok on the iphone. Another however was a 200x300 original and aperture created a 240x360 thumb for itself (upscaled it a tad bit) but created a 100x150 (5k) (yes REALLY) for the iphone, which of course looked horrible. It would have been much better off just passing over the original to itunes instead of butchering it. Aperture has no business creating an image for the iphone that's LOWER than the resolution of the iphone screen. (and that's not even accounting for your ability to zoom what, about 2x, into a picture on the iphone?)
good looking:
First is 213 × 320 pixels (14k)
Second is 240 × 360 pixels (32k)
aperture claims the original is 426 × 640 (0.3 MP)
bad looking:
The first path picture is a WHOPPING 100 × 150 pixels (5k) and looks exactly like the crap on my iphone.
The second is 240 × 360 pixels, 33k.
Aperture claims the original is 200 × 300 (0.1 MP)
So.... what do I do about this? The only workaround I see at the moment is to go through all the pictures I want on my iphone and UPscale them and reload them into aperture, so it creates more sensible images for my iphone. (quite a hassle for something that claims "it just works") Now, is this a bug, or am I missing a setting somewhere?
I also was unable to figure out how to locate the originals inside my applibrary. Control click gives you that option in itunes for example. That would at least be helpful to know how to do if I am forced to upscale all these pictures by hand to work around the bug.Are you using finder to look at your photos? Stay out of the finder! iPhoto organizes itself so that it can function. If you do anything to that structure, you risk losing your precious photos. The data folder has always been there.
-
Aperture 3 low resolution previews
Hello all,
I've been using Aperture 3 for a few weeks now and loving it. I read in the forums about how previews are set to low resolution and i've been having problems trying to get them back to a high resolution image file. I've imported the photos in iPhoto 09 and exported them to Aperture 3 (which are high resolution image files) to do further enhancement. After working with them, i noticed that the resolution dropped significantly. As a test,I dragged a photo which i've worked on to the desktop and it gave me a very low resolution. I then tried to export the same file using the drop menu to the desktop but still a very low resolution. Is there a way to get them back to a high resolution image file?
The second thing i did was to export the photos to my mac gallery and so i uploaded them with the original files but i still get the photos that i've worked on with a low resolution. The original files are still in high resolution.
Please advice and thanks everyone.
BrianIt might help to clarify your workflow:
I've imported the photos in iPhoto 09 and exported them to Aperture 3
There is no way to "export photos" from iPhoto to Aperture, so how exactly did you get them there? Export/Import? Drag and Drop... from where to where?
After working with them, i noticed that the resolution dropped significantly.
What do you mean by "resolution"? Do you mean the dpi? The file size?
As a test,I dragged a photo which i've worked on to the desktop and it gave me a very low resolution.
This only produces a Preview, but again, what do you mean by "low resolution."
Regards
TD -
Copy-paste of a chart or table in new iWork creates a low resolution raster rather than a vector
In iWork '09 I regularly copied charts, tables, etc. from iWork applications to other applications. They were in vector format. For instance, I have made a chart in Numbers, copied it, and pasted in Preview. This resulted in a vector which I saved to PDF, everything in less than 5 seconds.
It seems that in the new iWork this is not possible anymore, because the result is a low-resolution raster, which totally broke my workflows.
Is this an "enhacement" of the new iWork or I am missing something?Hi Badunit,
A possible explanation for our discrepency:
If I copy an entire page from a vector pdf using the thumnails bar in preview and paste that page into keynote, the image is a raster.
If I select a portion of that page with the preview selection tool, copy, and paste into keynote, the image is a vector.
This issue is especially damaging because I can't drag and drop pdf files I create into keynote. Major bugs have been introduced with regards to vector images, and I'm unable to identify a single rule characterizing this process. This is a disaster as I've relied on keynote as a longterm storage and organization tool for many vector images. Many of these images have now been corrupted in what I assume is an irreversible process. -
Managing Hi and Low resolution files
I'm afraid I know the answer, but am hoping I missed something that will solve my dilemma. I am using iTunes to replace my entire CD collection. I have ripped 300+ cds in Apple loseless format to replace my cd player for both my main audio system, as well as a whole house audio distribution system.
What I really want to do is to be able to load my ipod with these same songs, but at a much lower resolution (i.e. 128).
I realize that I can make itunes re-rip my music @128, but I absolutely do not want 2 copies of the same song/album, etc showing up in my Library.....
I'd be thrilled if I could 1) create a second library where I could store these lower res files, or 2) make itunes rerip on the fly when it transerfers files to my ipod.
So far, I can't find a way to make it do either. Am I missing somenthing? Is there an alternative solution? Is wanting to use high res files for a home system, and low res for mobile so far fetched that apple can't find some way to accomidate it? I am thrilled with my ipods, but extremely frustrated with the lack of useabilty in itunes.
Please help.... PS is there any other software out there (JRiver, etc, that will do what I want to do?)
Thanks,
JasonLane,
I think your suggestion may finally be the answer I am looking for!!! I just have a couple of questions on how to actually implement your suggested solution. I have created a second username on my PC. When I launch iTunes from the second username, my music library is basically empty.
What I'd really like to end up with is my full music collection, in 128 aac under my second user name... I'd love some instructions on how to accomplish this..
I hope I'm making sense... any clarification you can provide is extremely appreciated. I feel like I'm this close to finally being able to use the system the way I really want to.
Thanks again for your help,
Jason -
After OS X update moving 1:1 images results in low resolution and a long delay to snap into high res
After the OS X 10.8.5 update on my current generation 27' iMac moving 1:1 images results in very low resolution for those areas I am moving to with as long as a two second delay before the image snaps back into full resolution. Not only that but when it snaps back into full resolution you see a shift in alignment and a snapping into place with the nearby area that was already in full resolution. This is awful and is occuring with Lightroom 5 and 5.2. Has anyone experienced this?
My iMacs specs are the current generation 27" iMac, i7 3.4 Ghz, 32GB RAM, and the NVIDIA GeForce GTX 680MX 2GB running OS X 10.8.5.
I did not have this issue with OS X 10.8.3.I have noticed something similar on my Win7x64 system, but am not able to reliably reproduce it. It seems, for me at least, to be a combination of +Clarity and Lens Profile Correction which will always trigger an observable screen redraw when moving from segment to segment in 1:1 view mode. The variable is the delay.....most often it's a fleeting effect, but occasionally there's a more obvious delay in redrawing the image display. I suspect the more obvious delay is, in addition to the +Clarity and Lens Correction, some internal resource utilisation over a longer Lightroom session....certainly every time I've encountered it a Lightroom restart has cleared it up.
Don't know it that helps, or gives you any pointers to reducing the impact. Because of another "issue" with Lens Corrections (when it's applied, Spot Removal work gets slower), I tend to apply it last of all when editing pictures....so that also helps avoid this 1:1 screen redraw problem. -
Login screen changes resolution after a second
It' weird but my login screen on this laptop with arch always loads up at a lower resolution (larger font) then after like one second the screen refreshes into a higher res login. Didn't really know where to search for this issue, does anyone have any idea why it does that? There's also like a randomly red-purple colored T character around the top of the screen doesn't really bother me but maybe it's related somehow. Also I'm describing this in context of an alienware m15x with nvidia geforce GTX 260m
And it's being driven by the nouveau pkg xf86-video-nouveau
Last edited by NeoZelux (2012-12-28 01:24:06)HungGarTiger wrote:Intel, Nouveau and ATI drivers already enable KMS automatically for all chipsets. So you need not install it manually.
Yes, but not for early boot. That needs to be enabled manually. (Nothing to install, though.)
HungGarTiger wrote:
cfr wrote:Basically, the entire display goes to pieces like garbled white on black and shifts a lot and then after a noticeable moment, the display resolves into a much higher resolution version and everything settles down.
I used to have a problem with Ubuntu/Debian, where by my screen would randomly flicker for a second and random noise/garbled black and white static would appear until I played with something on screen. Then everything would settle down for a while, the resolution would remain the same though. That's never happened on Arch..
I should be clear: it happens as part of the boot process - not when the machine is up and running. It always happens at the same point when the nouveau driver is loaded. The reason it changes resolution is because it is switching to a driver which supports the graphics card properly and so I'm getting native resolution after that point but not before. I can't say it bothered or bothers me. The first time it was heart stopping because nothing, nothing was working and I felt I'd tried everything to get the graphics to be bearable but after that it was just part of the boot process and I was always quite pleased to see it because it meant that the graphics driver was loading! (I had trouble getting it to work and ended up having to blacklist stuff or something. Since this was my first install of GNU/Linux, getting it all working on non-ideal hardware was somewhat like being thrown in at the deep end, even though I used Debian. At least, so it felt at the time... People kept telling me to use the nvidia drivers and I kept explaining that I could not do so because they didn't make them for PPC!)
Last edited by cfr (2012-12-29 03:00:58) -
When making a book in Iphoto, iphoto does not say photos are low-resolution until after I go to assemble the book? So I have to go back and fix each photo individually after trying to assemble the book
There are several issues at work here. Which all seem to stem from this being an ipod with better video than a settop mac.
First the apple TV displays a max resolution of 720p (not 1080) for videos and photos alike.
Second when the photos are synced their resolution is reduced to have a max of 720 pixels vertical resolution - I'm not sure but there is an apple photo database in the pictures folder that looks like it contain these versions of the pictures.
The photos are then displayed by the apple TV and if you set it to 1080 it blows up the smaller images to fit the screen. From what I've seen any portrait pictures look OK (because they aren't blown up) but landscape photos look like crap. this may not be as noticeable if you use ken burns effect because it doesn't appear to blow up the picture when it uses this.
We purchased this primarily to show our photos in hi res on our 1080p tv, its a big disappointment and will be going back. Get a mac mini instead! -
Startup Screen at very low resolution
When ever I turn on my macbook pro (late 2011) the start up screen with the white background and the apple logo is at a very low resolution and has black bars on eithier side of the screen. Then when it switches from that to the login screen the transition between the two screens is very pixelated. Then when it gets to the login screen everything is perfectly fine. How do I fix this? Thanks.
Hello Reagan,
Welcome to the Apple Support Communities. The easiest way to solve the problem, is to reset the NVRAM, the following article will give information on what it is and how to go through that process.
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Regards,
-Norm G. -
I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!
Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am. -
I transferred some photos to my iphone via email and they have very low resolution. First I sent them from iPhoto with highest resolution, then I transferred them to my desktop in highest resolution and added them to an email, opened the email and saved to my Camera roll. They all look like low resolution photos.This is the exact method I have used to transfer photos in the past with my 4S and never had a problem. What am I doing wrong? Is this a bad camera? HELP please! Thank you!
My husband has the same phone, we purchased them at the same time. I sent him the same photos in the same email that I downloaded them from and on his phone they show up with the normal higher resolution. Is it possible that there is something wrong with my iPhone or is there a setting that can be changed? I'm still learning to use it. All my other photos are of normal resolution. Does this make any sense to anyone?
Please help!
Deb -
[SOLVED]Terminal at Lower Resolution
Hello,
I am on Arch linux with Gnome (GDM) and I have a question-
1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau), till I installed nvidia-340xx. If it makes sense. How to know if I have Optimus enabled ? (I didn't follow optimus part of the wiki and I ASSUMED I don't have optimus)My laptop is Toshiba Satellite - A665-S6070
I also did
Tips and tricks
Fixing terminal resolution
Transitioning from nouveau may cause your startup terminal to display at a lower resolution. For GRUB, see GRUB/Tips and tricks#Setting the framebuffer resolution for details.
GNU nano 2.2.6 File: /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.76 (buildmeister@swio-display-x86-rhel47-01) Thu Jan 22 12:12:24 PST 2015
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 75.0
VertRefresh 43.0 - 72.0
Option "PreferredMode" "1366x768"
ModeLine "1366x768" 72.33 1366 1414 1466 1526 768 770 775 790 +hsync +vsync Interlace
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768"
EndSubSection
EndSection
/var/log/Xorg.0.log -
[ 418.253]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 418.253] X Protocol Version 11, Revision 0
[ 418.253] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 418.253] Current Operating System: Linux Arch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 418.253] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08402ce0-a410-4f2d-aa05-6afb4296c9e1 rw quiet
[ 418.253] Build Date: 14 March 2015 06:45:50PM
[ 418.253]
[ 418.253] Current version of pixman: 0.32.6
[ 418.253] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 418.253] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 418.253] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 04:56:20 2015
[ 418.290] (==) Using config file: "/etc/X11/xorg.conf"
[ 418.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 418.333] (==) ServerLayout "Layout0"
[ 418.333] (**) |-->Screen "Screen0" (0)
[ 418.333] (**) | |-->Monitor "Monitor0"
[ 418.333] (**) | |-->Device "Device0"
[ 418.333] (**) |-->Input Device "Keyboard0"
[ 418.333] (**) |-->Input Device "Mouse0"
[ 418.333] (==) Automatically adding devices
[ 418.333] (==) Automatically enabling devices
[ 418.333] (==) Automatically adding GPU devices
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 418.371] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 418.371] Entry deleted from font path.
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 418.371] (==) FontPath set to:
/usr/share/fonts/misc/
[ 418.371] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 418.371] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 418.371] (WW) Disabling Keyboard0
[ 418.371] (WW) Disabling Mouse0
[ 418.384] (II) Loader magic: 0x815d80
[ 418.384] (II) Module ABI versions:
[ 418.384] X.Org ANSI C Emulation: 0.4
[ 418.384] X.Org Video Driver: 19.0
[ 418.384] X.Org XInput driver : 21.0
[ 418.384] X.Org Server Extension : 9.0
[ 418.387] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 418.388] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 418.389] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 418.392] (--) PCI:*(0:1:0:0) 10de:0a75:1179:fd30 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[ 418.392] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 418.392] (II) LoadModule: "glx"
[ 418.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 419.025] (II) Module glx: vendor="NVIDIA Corporation"
[ 419.025] compiled for 4.0.2, module version = 1.0.0
[ 419.025] Module class: X.Org Server Extension
[ 419.026] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 419.035] (II) LoadModule: "nvidia"
[ 419.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 419.099] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 419.099] compiled for 4.0.2, module version = 1.0.0
[ 419.099] Module class: X.Org Video Driver
[ 419.105] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
[ 419.105] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 419.106] (--) using VT number 2
[ 419.162] (II) Loading sub module "fb"
[ 419.162] (II) LoadModule: "fb"
[ 419.162] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 419.182] (II) Module fb: vendor="X.Org Foundation"
[ 419.182] compiled for 1.17.1, module version = 1.0.0
[ 419.182] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.182] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 419.182] (II) Loading sub module "wfb"
[ 419.182] (II) LoadModule: "wfb"
[ 419.182] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 419.184] (II) Module wfb: vendor="X.Org Foundation"
[ 419.184] compiled for 1.17.1, module version = 1.0.0
[ 419.184] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.184] (II) Loading sub module "ramdac"
[ 419.184] (II) LoadModule: "ramdac"
[ 419.184] (II) Module "ramdac" already built-in
[ 419.195] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 419.195] (==) NVIDIA(0): RGB weight 888
[ 419.195] (==) NVIDIA(0): Default visual is TrueColor
[ 419.195] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 419.196] (**) NVIDIA(0): Enabling 2D acceleration
[ 420.273] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 420.274] (II) NVIDIA(0): Vision stereo.
[ 420.274] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 420.292] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[ 420.292] (--) NVIDIA(0): Memory: 524288 kBytes
[ 420.292] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.12
[ 420.292] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 420.297] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): CRT-0 Name Aliases:
[ 420.297] (--) NVIDIA(0): CRT
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): DPY-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-0
[ 420.297] (--) NVIDIA(0): DPY-1
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(0): DPY-EDID-f0d8f39c-e735-531b-2696-7b835139c44d
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0): EDID Version : 1.3
[ 420.297] (--) NVIDIA(GPU-0): Manufacturer : SEC
[ 420.297] (--) NVIDIA(GPU-0): Monitor Name : Seiko/Epson
[ 420.297] (--) NVIDIA(GPU-0): Product ID : 0x3641
[ 420.297] (--) NVIDIA(GPU-0): 32-bit Serial Number : 0x00000000
[ 420.297] (--) NVIDIA(GPU-0): Serial Number String :
[ 420.297] (--) NVIDIA(GPU-0): Manufacture Date : 2009, week 0
[ 420.297] (--) NVIDIA(GPU-0): DPMS Capabilities :
[ 420.297] (--) NVIDIA(GPU-0): Input Type : Digital
[ 420.297] (--) NVIDIA(GPU-0): Prefer first detailed timing : Yes
[ 420.297] (--) NVIDIA(GPU-0): Supports GTF : No
[ 420.297] (--) NVIDIA(GPU-0): Maximum Image Size : 350 mm x 200 mm
[ 420.297] (--) NVIDIA(GPU-0): Valid HSync Range : 47.4 kHz - 47.4 kHz
[ 420.297] (--) NVIDIA(GPU-0): Valid VRefresh Range : 60.0 Hz - 60.0 Hz
[ 420.297] (--) NVIDIA(GPU-0): EDID maximum pixel clock : 72.3 MHz
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Detailed Timings:
[ 420.297] (--) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.297] (--) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.297] (--) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.297] (--) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.297] (--) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.297] (--) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.297] (--) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.297] (--) NVIDIA(GPU-0): Image Size : 353 mm x 198 mm
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 4c a3 41 36 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 13 01 03 80 23 14 78 0a 87 f5 94 57 4f 8c 27
[ 420.297] (--) NVIDIA(GPU-0): 27 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
[ 420.297] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 41 1c 56 a0 50 00 16 30 30 20
[ 420.297] (--) NVIDIA(GPU-0): 25 00 61 c6 10 00 00 19 00 00 00 0f 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 00 00 00 00 23 5c 02 67 00 00 00 00 fe 00 53
[ 420.297] (--) NVIDIA(GPU-0): 41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
[ 420.297] (--) NVIDIA(GPU-0): 00 31 36 30 41 54 30 36 2d 55 30 31 0a 20 00 04
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 420.297] (--) NVIDIA(0): DFP-1 Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): DPY-2
[ 420.297] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- End of EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 420.298] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 420.298] (**) NVIDIA(0): been enabled on all display devices.)
[ 420.298] (II) NVIDIA(0): Frequency information for Seiko/Epson (DFP-0):
[ 420.298] (II) NVIDIA(0): HorizSync : 30.000-75.000 kHz
[ 420.298] (II) NVIDIA(0): VertRefresh : 59.998 Hz
[ 420.298] (II) NVIDIA(0): (HorizSync from EDID)
[ 420.298] (II) NVIDIA(0): (VertRefresh from EDID)
[ 420.298] (II) NVIDIA(GPU-0):
[ 420.298] (II) NVIDIA(GPU-0): --- Building ModePool for Seiko/Epson (DFP-0) ---
[ 420.298] (II) NVIDIA(GPU-0): Validating Mode "1366x768":
[ 420.298] (II) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.298] (II) NVIDIA(GPU-0): Mode Source: EDID
[ 420.298] (II) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.298] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.298] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.298] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.298] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.298] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (II) NVIDIA(GPU-0): Viewport 1366x768+0+0
[ 420.299] (II) NVIDIA(GPU-0): Horizontal Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Vertical Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Base SuperSample x4
[ 420.299] (II) NVIDIA(GPU-0): Base Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Distributed Rendering 1
[ 420.299] (II) NVIDIA(GPU-0): Overlay Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Mode is valid.
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.299] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (II) NVIDIA(GPU-0): Extra : Interlace
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 60 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 65.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1344
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 70 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 75.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1328
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 78.75 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1040
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1136, 1312
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 800
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 85 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 94.50 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1072
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1168, 1376
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 808
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1152x864":
[ 420.301] (II) NVIDIA(GPU-0): 1152 x 864 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1152, 1216
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1344, 1600
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 864, 865
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 868, 900
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1376
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1488, 1800
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1000
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 148.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1011
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1328
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 75 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 135.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1296
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 157.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1072
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 162.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 65 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 175.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 70 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 189.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 202.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 85 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 229.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 204.80 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1920
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2120, 2448
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1394
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 261.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1888
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2104, 2456
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1417
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.303] (II) NVIDIA(GPU-0): 1856 x 1392 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 218.30 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1952
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2176, 2528
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1439
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.304] (II) NVIDIA(GPU-0): 1856 x 1392 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 288.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1984
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2208, 2560
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 60 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 234.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2048
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2256, 2600
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 297.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2064
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2288, 2640
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "320x175":
[ 420.304] (II) NVIDIA(GPU-0): 320 x 175 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 175, 191
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 192, 222
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x200":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 222
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.305] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "360x200":
[ 420.305] (II) NVIDIA(GPU-0): 360 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 17.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 360, 378
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 414, 468
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 223
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 240 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 12.59 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 400
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 245
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 262
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 73 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 332
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 352, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 244
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 260
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 360, 420
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 250
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 348
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 254
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.306] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 56 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 412
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 512
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 301, 312
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 20.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 420
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 484, 528
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 314
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 25.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 428
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 488, 520
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 318
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 321, 333
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 75 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 24.75 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 408
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 528
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 312
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.308] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 28.15 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 416
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 524
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 315
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.308] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) Nkarol wrote:
newguy wrote:These commands give no such file or directory
Did you install uvesafb?
Install v86d from AUR
This was my first time installing from AUR so I think I installed it, "pacman -Q v86d" gives me output "v86d 0.1.10-5".
Prepare the system
Remove any framebuffer-related kernel boot parameter from the bootloader configuration to disable the old vesafb framebuffer from loading.
$ grep vga /proc/cmdline
$ grep -ir vga /etc/modprobe.d/
Should return no results. If you do have a vga= option somewhere, you will need to remove it.
It didn't
GRUB
Note: This might not work.
First edit /etc/default/grub commenting the GRUB_GFXPAYLOAD_LINUX=keep line.
Then regenerate grub.cfg via the standard script:
# grub-mkconfig -o /boot/grub/grub.cfg
Did this
Then I also configured the file /usr/lib/modprobe.d/uvesafb.conf: (It wasn't empty) , so yeah. I think I installed it.Is there any other way to check ?
Last edited by newguy (2015-03-21 10:21:29) -
Satellite P500 - Splinter Cell is very slow - low resolution
Hey guys,
I have a Toshiba Satellite P500.
CPU Intel Core2 Quad processor Q9000 (2.0GHz, 1066MHz FSB, 6MB L2 Cache)
Operating System Genuine Windows Vista Home Premium 32bit (includes recovery partition for Windows Vista Home Premium 64bit)
Screen Size 18.4" Widescreen HD+ TruBrite Display (1680 x 945), supports 720p
Memory 4GB DDR2 (2GB + 2GB) (800MHz) expandable to 8GB
Storage 1000GB (500GB + 500GB) (5400rpm) SATA
Graphics ATI Mobility Radeon HD 4650 (2286MB Total: 1GB discrete memory + 1262MB shared memory with ATI HyperMemory technology)
Optical Disc Drive DVD SuperMulti Double/Dual Layer
Now im trying to play games like, Splinter Cell Convictions and things of that sort, apparently, according to the Games website, i meet all the recommended specs. Yet when i play the game its on a very low resolution and all settings set to LOW!
Is anyone else having these problems with there Notebooks?Hi Sammole,
Sine few days I have Satellite P500 too. I have to say its a very great notebook, I love it. The screen is really good and big and in my opinion the best option for games, videos and all other multimedia stuff. Furthermore its equipped with fast CPU and graphic card, ideal for playing games.
All my games running fine so I dont know what happened to you. Make sure that the eco mode isnt active, this will slow down the performance.
Make also sure that newest display driver from Toshiba is installed and latest DirectX version from Microsoft.
Have also a look Splinter Cell homepage. Maybe there is an update (patch) available that can help you. :) -
I'm trying to do a book using Iphoto, but it no longer gives a low resolution warning like it used to in the older versions.
I don't know why it doesn't anymore, (or maybe I have to add it on somehow??) but it makes it difficult to know how much I can
zoom in on a picture and still have it be good printable resolution.
Does anyone know how to resolve this or add the warning to the latest version of iphoto?
ThanksWith iPhoto 9 the low resolution for photos warning has been dropped. The only warning one will get now is for text that has overflowed the text box:
As Larry suggested send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to get it back. That's a big omission in my opinion.
You can determine what your minimum resolution is for your images (if all taken from the same camera) by dividing the pixel dimensions by the size of the larges frame in the book which would be 8.5 x 11. If it's at or above 150 dpi you'll be above Apple's previous resolution warning limit.
OT
Maybe you are looking for
-
Hi All, I have one .srf file which is having 5 different folders (tab). each folder has 15 to 20 items on an average. it takes nearly 7-10 seconds to open when I load the file through the standard load from XML function in SAP. what could be the reas
-
How do I save my files to the correct folder?
When I try to save a file, it gives me the basic locations (desktop, documents, my files, idisk, etc., but if I want the file in a folder in documents, I can't get deep enough to highlight the file. It won't go farther than the documents folder. Is t
-
HI , Can u explain the interfaces in ABAP concepts. Thank u sir,
-
Hi, anybody in east SFO bay area ( livermore, tracy, Mtn house, Pleasanton) interested in sharing home lab for collaboration ? i have it almost ready and looking for a partner
-
Hi, I create a flash archive of a sparc maschine (Solaris 8)and now I try to install this flash archive on an other sparc maschine witch my jumpstart server (X86 witch Solaris 10). So I have to create a rules OK file. But this fails with the followin