Low Signal Strneght after installing 6.0.2 update
Hi,
I am recieving low signal strneght after installing 6.0.2 update.Any fixes ? or anybody
Oops I meant cellular w/o the data.
You can try doing a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.
if that doesn't help then try - settings - general - reset - reset network settings.
if that doesn't help, then contact your phone carrier and see if they can help.
Similar Messages
-
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
After installing the latest ipod update some of my purchased songs no longer play
After installing the latest ipod update some of my purchased songs no longer play (though they still play on the computer). When I tested it on another computer it claimed that computer was not authroied to play these songs even though I was just playing them directly off the ipod. Even more strange is that I alos have a number of songs loaded on my itunes from albums I loaded and I am fairly sure these songs were ones I recorded rather than purchased but now they appear on my purchased list.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????
Try the Lion Community, and bookmark the notebook community (this is not).
You will probably need to provide others with more information too.
Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup) -
After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?
Try resetting the printing system.
Reset Printing System
Network printer or attached to the computer? -
Problems shutting down after installing 10.5.3 update?
Has anyone had any problems shutting down there IMac's after installing 10.5.3 update? I've tried shutting down twice and the image that appears when shutting down seems to go in an endless loop an doesn't shut down.
Can you restart from the menu and hold the shift key down, until the Mac
boots in a SafeBoot login screen; then choose Disk Utility (shortcut under
GO in Finder window, to Utilities folder) and run 'repair disk permissions'
then restart the computer normally...(?)
You may also have to consider starting the computer from the OS X
installer disc and choose from an option menu there (not to install)
and choose to use Disk Utility from the booted installer disc, to run
'repair disk' from there? You could also run 'repair disk permissions'
while booted from that installer disc, but maybe you'd still have to
repair those from the running system for best effect once it is back
running from the hard drive's system.
Some minor issues can happen after an update, usually just repairing
disk permissions before installing the update, and/or running up in
SafeBoot, can help. There are other things to try and do, if these don't
help that much. The state of the system prior to an update is important;
since an update can't fix anything otherwise non-related to an update.
Maintenance issues aside, after you repair disk permissions, safeboot,
and restart, if there still is an issue, you could try to download the Combo
OSX 10.5.3 update file and install it over your system; and then repair
disk permissions again after it finally restarts normally.
Was the 10.5.3 update a smaller (delta) file or was it the Combo (large) file?
Good luck & happy computing! -
On Mac - Android File Transfer stopped working. It says Unable to connect after installing the Verizon Software Update Utility from phone.
Hi JoeC695,
That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
Thanks,
PamelaF_VZW
Tweet us vzwsupport -
Unable to access media card after install of 10 software update
After installing the software 10 update, i'm not able to access the media card from the phone or when plugged in to the laptop. from the phone settings menu, i cant choose to save any file into the media card - its grayed out. Everything was working fine until I installed the update. Is this a common problem? did the update wipe out all the media card contents?
Have you tried removing the media card and re-inserting it?
-
HT6114 fans on full bore after installing 10.9.2 update. fix?
fans on full bore after installing 10.9.2 update. fix?
Same here. I've reset pram, smc, checked for any CPU intensive apps, bought new battery, even opened case and blew dust out of fans. Was going to do a heat sink clean but another thread brought up the idea of Mavericks being the culprit. I hadn't thought of it before but I'm starting to think it has to do with Mavericks.
MacBook Pro (late 2008) -
after installing yosemite, tried to update apps but an old apple id is shown with no way to edit. how can i update apps wait my current app;e id and password?
You need to delete and redownload them to do that. This may require repurchasing paid ones.
(116535) -
After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?
Hi All
Same problem this morning but now resoloved.
Update require using the following url support.apple.com/kb/DL1437 update for lion 10.7.1
updates now work with this update
Hope this helps
Thanks -
Signal drop after installing OS 4.0.1 - Apple 3GS 16GB
Hi,
I have installed OS 4.0.1 yesterday and immediatly noticed drop in signal strength.Signal strength came to half after installing it.
Any one else experiencing the same problem and any solution?
I know I can go back to old version rather than that any solution?
Thank you
G.Partheepanlrdnitecon wrote:
Incorrect... it changed the equation for the display. the math was changed which is now affecting the actual connection.
No, it didn't.
the places i had full signal now only has half. the places i had a one bar now has none. this is all since the 4.1 update.
That sounds about right, as the update changes this.
so a software update does have the ability to affect things like signal if everything is based off the previous equation. you follow what im saying.
Again, no. The update does not change the actual signal your phone gets. It can't, as this is dependent on the cell tower's output power and how much of that is coupled into the antenna. That yields a certain signal strength number, expressed in dBm, which the phone then maps to a visualization in bars. This is done because most people have no idea what -100 dBm means, much less how much worse that is than -51dBm (which is all you'll ever get). A nice graph showing bar is pretty understandable, though, so phones use that.
How the raw numbers (dBm) map to bars is different per phone. You can not compare a Nokia phone to an iPhone, or an iPhone to a blackberry, or a blackberry to an HTC phone, etc. using just 'bars'. You need the raw numbers.
The 4.0.1 update changed how the different numbers map to bars. Nothing else changed, apart from some Exchange-related bug.
Here's a picture showing what happens. Keep in mind the actual signal strength (the line in the middle) does not change.
http://images.anandtech.com/reviews/gadgets/apple/iPhone4/part2/iPhoneSignal_bot h.jpg -
Error message after installing 10.8.2 update
After installing the osx 10.8.2 update the mok resrtarts and give a error message: "the update could no be installed" or so. As I look up in the system info the update appears al isnatlled. Why?
I'm another user with same issue, started right after the upgrade, appears consistently with login/out, sleep/wake, rarely otherwise.
? some launchd process calling usereventagent which then crashes
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFNumber length]: unrecognized selector sent to instance 0x5088002c7'
abort() called
terminate called throwing an exception
This is on a 2.66 GHz Quad-Core Xeon. No similar issue with my Air which I also upgraded to 10.8.2, so I suspect it's a launchd process installed by something which I and others have added that gets run at login and logout (and less frequently at other times). -
After I installed the latest iOS update, neither mine, nor my wife's iPhone work on our 12 month old Bose Sounddock...any suggestions?
You can use the stereo input on the Bose.
-
Wireless printing no longer working after installing HP 2.7 update
I have been using wireless printing from my Macbook Pro (running Lion OSx 10.7.2) fine until yesterday when it just stopped working out of nowhere. From looking on the forums it appears that this is probably a result of the HP 2.7 update (which I also had the issue of continuously re-appearing in my software update list even after installing it multiple times - though i was able to resolve this courtesy of this forum). I've tried re-installing the printer multiple times and it works fine when connected via USB, it acnowledges that the printer is connected to the same wireless network as my computer bu
OK, before you dive any more into the registry, a simple question. Did you try uninstalling iTunes, rebooting, and re-installing iTunes?
I do have an entry for 'iTunes.Application.1' (below). However, I'm sure there are many more registry entries related to iTunes. In other words, adding this entry will probably not be sufficient to restore the COM functionality.
Windows Registry Editor Version 5.00
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}]
@="iTunes Class"
"AppID"="{F98206B5-F052-4965-9FA0-85F61BC3C19D}"
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}LocalServer32]
@=""C:\Program Files\iTunes\iTunes.exe""
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}ProgID]
@="iTunes.Application.1"
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}TypeLib]
@="{9E93C96F-CF0D-43f6-8BA8-B807A3370712}"
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}VersionIndependentProgID]
@="iTunes.Application"
Maybe you are looking for
-
5200 : Error Executing query , Invalid Item ID in HFR
Hello, To start with I read about this Error in OTN discussion forum itself and none of them helped in this situation. Basically , We are trying to Make some modifications in a Report from Financial Reporting studio. When tried to run the report with
-
Calling a form procedure from a menu
I want to call WebUtil's client_host function from my custom menu .MMB, but it doesn't appear that I can Subclass the WebUtil.OLB into a menu module. Can I call a WebUtil function from my Menu that is attached to a Form that has been WebUtil enabled?
-
did anyone notice when you updated to is06 you lost battery charge percentage? ho do you get it back? ty jmcapo
-
When Import a file with wrong name system will behave Hang.
Hi, On Portal at Mitigation->utilty->import . then type any file name to the text. System will hang how to resolve ythis issue. thank
-
When I click on the "Get mail" icon, nothing happens even though I know there is mail. However, if I click on "send" and then go back to the Inbox, the emails start loading. What's going on?