Low sound from my macbook speakers
my speakers sound got pretty low can any one hlp me
I got it working. I had to go to Applications > Utilities > Audio Midi Setup and play around with the settings for the HDMI connection in there. My setting was at 96,000 hz and wasn't working but when I switched it to 48,000 hz it worked perfectly. Not sure how this got changed as I had never opened this app before fixing this setting. Found it in a similar thread so seems to be happening with the update.
Similar Messages
-
I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers.
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it. -
Playing sound from my macbook to my imac
I'm using my iMac as an external display for my macbook pro. Since my iMac does not support thurderbolt, I've had to connect it using a Mini displayport. I've bought a 3.5mm Male to Male Stereo Cable so I could play the sound from my macbook through my iMac but both go silent. Anyone have any suggestion on how I could play sound on my macbook through my iMac? Thanks in advance.
Firstn make sure that the male audio cable is plugged into the "audio out" port on the MacBook and is plugged into the "audio in" port on the iMac. Second make sure you are in the MacBook system preferences (Not the iMac) then click headphones. The thing named "Headphones" is your iMac. I hope that helped
-
Has anyone resolved the whirring sound from the Macbook late 2008 Optical Drive Self-diagnostic yet?
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the hard drive does not appear in the DU sidebar list then it has died and will have to be replaced. No need to proceed beyond this point.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.
Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen -
Why i can't hear the sound from my macbook air on the left hand speaker?
why i can't hear the sound from my macbook air on the left hand speaker?
I think it have some problem with the hardware.
and what can I do now?
Please help.Have you checked System Preferences>Sound and the Balance setting?
Try a PRAM reset:
http://support.apple.com/kb/ht1379
Ciao. -
I can hear a loud 'CD spinning/fan like' sound from my MacBook Pro intermittently. Definitely not the audio as i muted it. No CD either. And the only programs running are words, safari and mail.
It sounds like the fan but this is the first time I hear it in the past 6mths using this Mac. If its the fan, shouldn't the sound be there all the time and not intermittent?
-
Low sound from right head phone
Hi, I have been using iPod 5th generation for about 6 months.
But suddenly I get low sound from my right headphone than left headphone..
I didn't change any settings in my iPod and i have done rest too...
I am facing same problem.
Please Help me...
Thanks in advanceHiya,
Yes, or you can put your serial number in here https://selfsolve.apple.com/GetWarranty.do
and they will send you a box to put your iPod in, which they will then either repair or replace with a new one.
Thanks
Mark -
There is no sound from my Macbook Air even when I turn it on. When I go to System Preferences and click on Output there are no options. The Mute box is also checked, but I cannot uncheck it. Also when I try to play any video from the web, it stops playing after a second or so. I have turned off my computer and turned it on again which did not help.
Try these
PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
SMC Reset: http://support.apple.com/kb/HT3964 -
I don't know what to do - I don't have any sound coming from my internal speakers, and with headphones there is still no sound coming out. When I go into system preferences under sound, there is nothing there - it says 'no output devices'. What should I do?
MacBook Pro model?
Hard to suggest a solution without knowing the model.
The following tips may not apply to latest MacBook Pro 13 inch model.
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers / Headphones
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it. -
No sound from built in speakers only headphone jack works
Not sure what happened but I only get sounds with headphones there is no sound from the speakers from my laptop envy15
Hi
Please find the link given below might help you to fix your issue.
Sound Issue
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Very, very low sound from MSI K8N SLI Platinum
The sound from my MSI K8N SLI Platinum nForce 4 is so low that i must set the volume control on max and the speakers on max to hear anything. I tried other speakers with the same result. The speakers are amplified.
What can i do?Well for a start you could search the forum as this problem is now well known. I'm not getting at you but I know how frustraing it is wanting someone to respond with an answer, and you don't have to wait if the problem has already been discussed!
The problem is that MSI decided to specify that the 24 pin supply must have -5v to support the creative chip. This is in contradiction to atx 2.2, and other PSU specs for 24pin supplys, which say the pin in question is NC (no connection).
What you need is a dual standard 20/24 pin supply.
Theres is a FAQ about this on the diamond forum, but I'm not sure if unregistered Platinum SLI users can read them anymore!
According to the FAQ MSI are promising US diamond users the chance to RMA their diamond boards when modified boards whcih don't require the -5v supply are availble. This isn't much use to us european Platinum SLI users.
I have a Tagan 480w which is dual standard 20/24 pin supply. -
Really low sound from rear left spea
I have 5. headphones and when i have them pluged into my xtreamgamer i barly get any sound from my rear left speaker, i know it works because if i plug it in my basic MB soundcard it works fine. Is this a known problem or a fix for this?
I've installed the latest drivers, made sure the the jack is plugged in right (theres only one, that comes from the Monitor or the headphones). The CD only has an installation guide, and i know onboard sound is disabled because i never had one in the first place after a recent reformat. and before that reformat sound came out from both sides normally, so i know something is wrong with the sound card.
EDIT: i just did a random tests, and i found out that the right speaker is working, but it is playing extreamly low. i had to blare up my volume up to 00% and i bearly heard it. i've checked the playback control, and played around with it and still have same problem.Message Edited by Bigs80 on --200606:49 AM -
The sound from my macbook pro has deteriorated
The sound from the speakers and headphones has suddenly deteriorated
Sounds (sorry for that) that it could be adobe flash do you get sound using safari
Uninstall Adobe flash and re install latest version for Mac OC
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml -
Sound from Headphones and Speakers
I am getting sound out of the headphones and the speakers on my laptop. I am trying to hookup my laptop to my tv so that I can watch movies. I have everything figured out, except that i think I disabled the headphones. When I plugged the cable into the headphone jack on my L455 laptop and into the RGB audio in on my TV, my laptop asked me if I had connected headphones or a line out. I wasn't thinking and switched it to a line out. Because of this, I think i screwed it up and now can hear the audio from both the TV and laptop speakers. When I search for the headphone driver on my laptop, they are no where to be found. Any advice as to how to fix this problem. I would really like to watch this movie sometime tonight without an echo from the laptop speakers!! If I turn down the speakers, no volume goes to the TV. If I have the speakers muted, no volume goes to the TV. If I disable the speakers, no volume goes to the TV. I beleieve this is due to me disabling the headphones, but I can not find it on my computer!!
Thanks, CortneyRealtek chipsets do have a "multi-stream" option. Classic mode seems to provide the most normal result, but there was a version of the driver where the behavior was unpredictable and it wasn't possible to know what would happen.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.
Maybe you are looking for
-
Como instalar Acrobat 6.0 Pro en Windows Terminal Server
Hola, necesito instalar Acrobat 6.0 Pro en un sistema Windows 2000 Terminal Server. Durante la ultima fase, y justamente despues de pulsar Instalar, me reporta un error 2755, si lo realizo desde una ubicacion remota, con unidad de red asignada. Y si
-
Function Module for .xlsx to Internal table
Hi Gurus, Please let me know if there is any function module for .xlsx to internal table. Kind regards, Varun
-
About java.sql.Statement
Hi friends, i want to ask if there is any way to display the complete statement as a string after setting it's parameters(that is for debuging purpose).
-
Put prepended "WITH" into Select statement possible?
Assume I have a SQL statement like: with t1 as (select ......), t2 as (select ......) Select .... From t1, t2 Where ....; Can I merge somehow the prepended "with" term into the actual select statement? As far as I remember there is an equivalent stat
-
MacBoor Air is now hanging with various applications, including the Finder
Hi Everyone, My 2011 MacBook Air is now hanging rather frequently, regardless of program. Any suggestions?