Low sound level when I using BT earphones

When I use BT earphones to listen mp3 songs on my Nokia N95, the volume always starts from very low level. At the beginning, I thought there was no sound. Once I turned it up, everything is ok. Can anyone tell me how to increase the default sound level or ideally recall last listening level.
Thanks!

hey patrixxxx, i hope you don't mine how much you got your BH500 & where?
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

Volume level on line-in at 100% but still low sound level when I rec

For many years and hundreds of times I have successfully recorded wave files using a wave editor (Goldwave). I have transferred albums, tapes, and now satellite radio by running stereo cables from my receiver into my line-in on my sound card (using a stereo-to-mono adapter). The volume level on the line-in was always too loud on my old sound card, so I always turned the volume of the line-in down to about 20% and it worked just fine.
Two weeks ago my old sound card fried (don't know the brand - got it from a friend, and I've already thrown it out). I replaced it with a Sound Blaster Li've! 24-Bit. However, using the same configuration (receiver into line-in on card), when I record now the volume level that it records at is way too low. Even when I set the line-in level at 00% the volume that it records at is not even half the level it was with my old sound card set at 20%. Basically, when I record now at 00% on the line-in, the volume level it records at is too low. I have no problem with the line-out level - when I play mp3's or anything else on my hard dri've the volume is crisp, clear, and plenty loud at 40%.
But what is the deal with the low volume recording level? Is there another setting I need to change? Or do I not have the right sound card to do this with? Please let me know if it is a setting issue, or if I just need a different sound card to do this. Thanks.

I've had an Audigy2-nx for a week and have struggled with low
recording levels as well.
Have you tried selecting "what you hear" instead of "Line-In"?
This gives me about 20% higher input levels.
I gave up on MedeaSource for variable bitrate recordings and
moved to dbPowerAmp. (direct recording to lame-mp3)
Others here mention good VBR recordings with MedeaSource, but
it won't exceed 90kbs (average) on my system.
I'm finally getting decent recordings from line-in.

Low sound levels in Photo Booth and Imovie

I am a new Mac user and I am trying to record a short video to email using the built-in Isight camera. I have tried to use Photo Booth and Imovie and both of them produce videos with very, very low sound levels. You can barely hear it even when turned up to the max. I have checked the Sound preferences, and it is set to the built-in microphone, about mid-level. I've tried cranking it up to the max and with and without Use ambient noise reduction checked. It has no effect. How do I get a decent sound level? It is unusable at this point. I've updated my Software and repaired permissions, and still no luck. Any help would be greatly appreciated. Thanks.
daomun

Thanks for the response. I checked my midi audio settings and they are at the suggested rate. I called up an Apple support tech, and after trying a few things he basically said the internal mics are junk and go buy an external one. In the mean time, I've cranked up the sound levels to max, so I can hear it a little, but there is a ton of background hiss. I've done a web search and several people have reported this problem. so I think it might be something besides junk mics. Why do they install them if they are completely unusable? Thanks again. I'll try trashing the sound pref's too.
daomun

AirTunes using Airport Express - Low sounds level in speakers

Recently, I started having a problem with the sound level coming from the speakers connected to my Airport Express. The setup worked fine until a few weeks ago.
Actions I have tried:
(1) a hard reset of the Airport Express - no improvement
(2) connecting speakers directly to laptop - sounds level was great
Software I'm using:
- iTunes v7.1.1.5
- Airport Express Firmware v6.2
Thank you in advance for any help.
IBM Laptop ThinkPad Windows XP Pro

I suggest that you upgrade your AirPort Express Base Station's (AX) firmware to version 6.3.

HT5517 How can I adjust sound level when streaming radio from my Apple TV through Airplay speakers?

I have a 2nd Gen Apple TV with an airport express set up as airplay speakers. I can stream the new radio through using the Airplay speakers pretty well. The problem is that once I've got it going, I cannot adjust the sound level without laboriously backing out of the radio menu, going back to the top level menu then drilling down into the Airplay settings to raise or lower the speaker's sound level.
Is there an easier way to do this?

go to system preferences > Sound > Output. then change the output from "built-in" to HDMI.
Maher

Why lower audo levels when connecting to home stereo system

I have connected an audio cable to the earphone output on the Nano.This cable has two RCA connectors that connect to the line-in of my home stereo system. It works fine except for one thing. The volume is lower than other sources that feed into a "line-in" input. To make things even across the system, is there some type of devise that will increase the output level of the headphone jack on the Nano? Or does using an Apple cable make any difference. I would think this little problem is just a case of the headphone output being of a lower output level than a "line-out" output.
Thanks for suggestions.
Lonnie
Custom made PC Windows XP Pro 1gig ram P4 4.06

"I would think this little problem is just a case of the headphone output being of a lower output level than a "line-out" output."
It is, which is why many people who want to do this use the iPod dock, which has a proper 'line out' socket.

Tecra S11 - Low sound level

I have recently purchased an S11 and as a previous owner of the Tecra line I was quite disappointed in the Audio level. I realize that the S11 is a Business machine and not a multimedia machine, but I have to sit very close and make sure there is no noise in the room to hear the on board speakers.
Is there a way to overcome this? Even 50% more audio would be a tremendous improvement.

Hi Pman,
Im not a Tecra S11 owner but I cant imagine that the sound level is so low as you described.
What program you use for listening music?
What kind of files you have more music?
What operating system you have?
I can recommend the multimedia player VLC media player. Thats a freeware tool which is really great and play the most audio and vide files.
Furthermore make also sure that you have highest sound level and try updating the sound driver.

My 4s has grainy low res images when I use google image search, imdb and USA today app. But not FB. How do I fix this?

My 4s images are grainy and low res when I use google image search, imdb and a couple other apps. My photos roll pics are hi def just not images. What's up with this?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

All of a sudden my iPhone 4S keeps shutting the sound off when I use the google app

When I use the google application on my iPhone 4S it shuts the sound off on the hole phone so I have to go into the settings and change the ringer and alerts so that the sounds will work again.

Uninstall the app and reinstall it. If it persists dont use it. simple

[SOLVED] Very low sound level after installing kernel26-2.6.30

I can't see this issue anywhere, so I'm sorry if I duplicate it here.
Since the upgrade to 2.6.30, the sound on my desktop system (VIA P4M890) is very low. (I also have a Thinkpad with an Intel GM45 chipset, and this is working like a charm.)
I'm using a very simple ALSA configuration. There is sound, but it is just almost inaudible. I've set the highest possible level in alsamixer and when I turn up the volume to the maximum, I can hear sound. But it is very weak and not very clear. It's not related to hardware failure: rolling back to 2.6.29 fixes the problem.
Did anyone detect the same issue?
Last edited by quickfished (2011-04-05 05:52:49)

quickfished wrote:
fukawi2 wrote:I had a similar problem, but then found there was a new channel in alsamixer for "Speaker" which needed to be turned up...
Alright mate, thanks. Let me try that.
In fact, I didn't have that new channel, but I set the VIA DXS mixers to 100% (like described here: http://alsa.opensrc.org/index.php/Via) and now everything is working.
Great!

C7 low voice level when recieving calls

always since updating the SW version 014.002 have low level of voice at the C7 speaker when recieving calls, plz advice

Hello! I have the exact same problem, low volume on voice calls... I have also upgraded my phone to version 14.2, but I had not realized that the low volume started happening after the upgrade. Now, you said we should try to reinstall this same firmware, version 14.2, but how do we do that? Do we have to use some special software for that, or is it possible directly on the phone? Thank you in advance!

Speaker sounds bad when not using headphones

I wanted to listen to my music on my iPhone so I started to play a song, the first song sounded fine. By the middle of the second song, the quality of the sound got really bad...full of static, almost like I had bad reception. I switched to the headset and it sounds fine.
I guess the iPod part of the phone wasn't meant to be listened to w/out using a headset?

I guess the iPod part of the phone wasn't meant to be listened to w/out using a headset?
Not at all. I do so often without any problems and when listening to music via the speaker at the office, I need to keep the volume fairly low so you may have a defective speaker which is covered under warranty. I also watch movies using the speaker for sound when not in a noisy environment.
If you live near an Apple Store, I suggest making an appointment to have this checked and if you don't, give AppleCare a call - (800) 694-7466.
You might try a Reset first by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release ignoring the slide to turn off prompt when doing so. This does not affect any data or settings.

HI - HOW DO I LOWER SOUND LEVELS ON CERTAIN TRACKS ON PLAYLISTS /BURNING TO CD TO AVOID BEING BLASTED? THANKS

I have a selection of music, but some of the tracks are far louder than others - can i adjust these levels before burning to CD or loading playlist to iphone?

Thanks Jolly Giant! I have a simple solution suggested by Natryann - command + 'i' and adjust - perfect for current priject. iVolume looks very interesting and will look at it further when got more time and more sound managing to do! Many thanks.

Very low performance level when the Server has 2 actives Network Interf.

In a server Pentium IV 2.0 GHz, 1 Gbyte RAM, Windows 2000 Adv. Server, with two network interfaces, we observe a lower [really critical]performance when the two network interfaces are actives. If we disable one netrowk interface the performance increases to a very higher level. Could it be solved only by the configuration? At the beginning [still both interfaces enabled] we had only one listerner applied to IP 0.0.0.0. To test this situation, we modified the IP of this listener for the IP of one of the network interface and we also added one other IP to the other listener with the IP of the second network interface. At this test was not possible to see any increase of performance. In conclusion, we understood that it is not a trivial problem and we appreciate some help to avoid this down performance at the server.
Thanks in advance, Ricardo Gomes e Bruno Guimar�es
Network Engineer
Link Data Inform�tica
www.linkdata.com.br
+55 61 9219238
[email protected]

Running with two nics will not necessarily give better performance. 1st, if the 2 adapters have been configured as a team then the network switch that the server is connecting through must support teaming of ports. 2nd if adapters are not teamed but going through different networks then make sure that the routing priority has been set.

When I make an outgoing call the recipient cannot hear as though the volume were turned down Lowe. However when I use my speaker phone function the recipient can hear at normal volume. Is there a fix for this issue? Thanks Teresa

When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low
However when I activate the speakerphone the recipient can hear me loud and clear
Is there a fix for this?
Thanks
Teresa

Hey Tlabounty,
Thanks for the question. I understand you are experiencing issues with the microphone on your iPhone 5. To troubleshoot this issue, you may find the information in this article helpful:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Note that speakerphone and regular calls utilize seperate microphones on the device. It sounds like you have isolated the issue. Furthermore, if you determine that the issue is hardware related, the following resource may help you get started with the service process:
iPhone Repair and Service - Apple Support
http://www.apple.com/support/iphone/repair/
Thanks,
Matt M.

Low sound level when I using BT earphones

Similar Messages

Maybe you are looking for