Low sound throughput....SOLV

Original system...Up to date PC with onboard sound.Recorded from turntable through a pre-amp via Polderbit sound recorder.No problems.A couple of months ago I upgraded to an Audigy? 2 ZS and all is well except recording from the turntable. The pre-amp is connected to the 'line in' but the sound levels are much too low. The pre-amp has an output of 450mV/00k?, 2 x phono.Your help Please. SOLVEDThe sound level was turned down in?'Sounds and Audio Devices.....Play Control'?Thanks anyway?Message Edited by EJB on 04--20070:39 PM

jutapa wrote:
jonathanx wrote:
I get low sound output when I connect the TV Tuner to this port:
align=center><IMG src="http://dri'vextreme.com/images/SoundBlaster-Li've-ct4780_300.jpg">
That connector has only Mic and Headphone Out channels. I suppose you need to connect the audio cable from TV tuner to the AUX connector instead.jutapa
It does not fit in any other port...

Similar Messages

Low Sound Vloume & webcam

I've recently bought a Toshiba laptop (Satelite L500-13) which does not have satisfactory sound volume, sound is extremely low...and other thing is the picture quality of the webcam is worst that made me disappointed!
Please advise how to solve these.
Thanks!

Here's one suggested fix that works for many who experience the low sound issues on laptops which use the Realtek HD Audio drivers. These directions are for Windows 7, other operating systems may require a slightly different set of steps.
First, Download and install the latest Realtek HD Audio drivers from the Realtek website. If the ".exe" or executable file version of the Realtek HD audio driver is downloaded, this file may need to be run twice (run installer, reboot computer, run the installer a second time, then reboot the computer a second time) to properly install the audio driver.
Second, once the audio drivers have been updated, enable "Loudness Equalization" on either the Start --> Control Panel --> Hardware and Sound --> Realtek HD Audio Manager --> Sound Effects tab, then click OK to save the setting change. Or on the Start --> Control Panel --> Hardware and Sound --> Sound --> Speaker Properties (select Speakers then the Properties button) --> Enhancements tab, scroll down the list of sound effects to enable "Loudness Equalization" then select the OK button to save the setting changes.
Once the Realtek drivers have been updated and the "Loudness Equalization" has been enabled the system sound audio level is much louder, however the DVD and Audio CD audio levels might continue to be low for some users. Some find that setting the Equalizer, found under the Realtek HD Audio Manager Sound Effects tab or on the Speaker Enhancement tab, to "Powerful" seems to help with the sound levels.
As to the web camera video quality, these integrated web cameras will NOT give video camera quality video. And it appears that these integrated cameras are in the 1 MegaPixel range which also affects the video image quality. If the Toshiba Web Camera Application version is installed check the Settings page and experiment with the Profile setting to improve the video quality as well as the settings on the Advanced tab, also reducing the size of the video display window from 640x480 to a smaller video window size like 320x240 might also improve the video quality. And the amount of light in the room might also affect the image quality.

Very low sound volume on Portege R500

The sound volume on my R500 (R500-11c to be exact) is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the util_mute_off_25847B.exe utility.
Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
Decreasing the sound volume slider from 100 does make the almost inaudible sound even harder to even notice, and at around 45 it is no longer audible even in a quiet room with headphones.
So it seems that I somehow need to reset the audio chip to "normal" level. Or it is broken and can't output anything more audible.
Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

Hello, and thanks for answering.
Yes, I have tried increasing the volume in control panel -> Realtek HD audio manager. No success.
I have used a bunch of different drivers, both from toshiba's website and realtek's.
Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
A hardware problem... well maybe, I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
Anyone got any other ideas?
I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Hi saiyed adil,
Thank you for contributing to the Apple Support Communities.
It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it.
It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Iphone 4s really low sound

Hello,
From some months I experience the problem with the sound of the iPhone 4s. The sound is really low. You can only hear it if you put your ear very near to the speakers. I've tried everything. Settings -> Sounds to max. Restarting the iPhone. Once I've played Flappy Bird, the sound like fixed itself for 2-3seconds. From low sound it turned very loud but for 2-3 seconds. Then I've tried Restoring the iPhone to its factory settings - nothing again. I lost and my Flappy Bird...
So my Question is - can we fix the sound problem and return my flappy bird? I can't download it from the gamecenter.

vikAy,
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.
All my best,
Allen

My ipod touch 4 has low sound and mostly hiss on playback.

My ipod touch's video playback (ie. taking a video and playing it back with the camera) is suddenly malfunctioning. It's almost a year old and no other issues previously. It hasn't been dropped or contaminated. I record video, and when I play back mostly what I hear is a loud hiss, and only barely audible low sounds such as talking. Any ideas? I recently updated is there any way to revert? Also after update the video and camera functioned locked up as I was trying to use them. Thanks!
Nothing is blocking my speaker, no case, and I did already try cleaning it. Audio playback is fine elsewhere.

I don't know about the timing of my issue, maybe microphone sensitivity was adjusted in the software update? However, my device was just out of warranty, so out of desparation (I use my video for baby stuff and I neeeed it , I stuck a straight pin in the mic hole and swirled around, it works just fine now. There was no visible dirt in the hole, it hadn't gotten dirty, I take good care of it, and yet something must have been in there. The mic works now after the pin fix, and I've seen several other places it has worked for others, wouldn't use this fix maybe if you're still in warranty.

Very very low sound in internal speaker

Hi I have satellite A505 S6005 some days ago its internal speaker did not give sound today i realize that very very low sound is coming in right speaker. i aleady reinstall realtek latest version and re istall the bios version 1.4 kindly help me

Don't forget to check the physcial volume control dial on the side of the laptop. Not easy to see, and many people aren't aware that it exists. I had a low volume problem and was pulling my hair out for a day or two until I realised it was there.

Low sound levels in Photo Booth and Imovie

I am a new Mac user and I am trying to record a short video to email using the built-in Isight camera. I have tried to use Photo Booth and Imovie and both of them produce videos with very, very low sound levels. You can barely hear it even when turned up to the max. I have checked the Sound preferences, and it is set to the built-in microphone, about mid-level. I've tried cranking it up to the max and with and without Use ambient noise reduction checked. It has no effect. How do I get a decent sound level? It is unusable at this point. I've updated my Software and repaired permissions, and still no luck. Any help would be greatly appreciated. Thanks.
daomun

Thanks for the response. I checked my midi audio settings and they are at the suggested rate. I called up an Apple support tech, and after trying a few things he basically said the internal mics are junk and go buy an external one. In the mean time, I've cranked up the sound levels to max, so I can hear it a little, but there is a ton of background hiss. I've done a web search and several people have reported this problem. so I think it might be something besides junk mics. Why do they install them if they are completely unusable? Thanks again. I'll try trashing the sound pref's too.
daomun

Lower sound Zen Vision Plus than Zen Micro Pho

Hello! I have had Zen Micro/Zen Micro Photo in -2 years, before I this year switched to some Asono player, but the sound was low on that, and I wanted to go back to Creative for it's quality and sound.So I bought the new small Zen Vision Plus, very satisfied with video & other cool new functions! And to secure me a good sound, I bought big Creative headphones for 400 NOK, and they are very good with good sound and base(bass).But whenever I used the MP3 player, the sound dissapointed me, I also tried with the default earphones which followed, and the sound is still not as high as on Creative Zen Micro/Photo.My friend has Creative Zen Micro the old one, and we started the same song at the same time on both our players, and tried with the default headphones and the new headphones which I bought. And belei've you me the sound on his MP3 (Zen Micro) was much louder then on mine. So it is dissapointing to see that I am stuck with this MP3 with lower sound. I love the design & functions on Zen V Plus, and love the sound on Zen Micro. So I don't want to go back to Zen Micro. Is there some way to fix this? Some sort of upgrade? Or has it something to do that the MP3 in USA has lower sound and MP3 in Europe has higher, or the other way around? How do I check where my MP3 is from?I hope someone here has tips & tricks or solution to this problem, very annoying that my MP3 is "almost perfect"! I got to go play tennis now, waiting for a positi've reply, thanks a lot guys! Every single post is helpfull, thanks again!

well man all i can say is...bigger isnt always better. I have a Zen Micro Photo, its about a year old, i just have regular good ol target special headphones and its loud enough to blow an ear drum. Sometimes if i dont feel like?wearing headphones, i just turn it all the way up and set the headphones on my desk or something. sooooooooooooooooo i would just stick to the stuff you know is good...plus the micro photo is BAMF

Low sound web cam

New L505-S5988 64 Bit. Windows 7. Very low sound when I use the web cam mic. (The person at the other side does no hear me). Can anybody please help me? Thanks.

I don't know the Web Cam you have there but I assume it's just a USB camera w/ microphone.
You didn't mention which soundcard you are using but in generally, you connect the microphone cable into pink jack connctor, open the microphone source channel and set recording source to microphone (or "What U Hear" if you like to play some background music there too). As I do not know the software you have there, I give instructions for Windows Play/Recording Controls only.
start run.. sndvol32
--> this command opens you the mixer panel for play sources - enable the microphone and set it's level (you can boost the signal 20dB (press advanced button))
start run... sndvol32 /r --> this command opens the mixer panel for recording source - enable microphone and set the recording level (you can set the 20dB boost here too)
jutapa
Message Edited by jutapa on 01-25-200712:51 AM

Sony Xperia m low sound output

The phone has low sound output when connected to external speakers. Can you provide an option to increase the volume gain in the sound enhancements option of the music app..

Have you seen this topic?
https://talk.sonymobile.com/t5/Xperia-Z1-Compact/Lollipop-update-is-a-mixed-bag/m-p/968018#U968018
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Satellite M300: Low sound microphone levels and crackle sound using Skype

Brand new machine, and tried to use Skype.
Low sound levels and a crackle through it.
Tried it in sound recorder, and low sound, but no crackle.
Can not get the sound levels up.
Driver for Conexant HD SmartAudio 221 shows as up to date (4.36.7.0)
Any assistance would be appreciated.

Do you use Toshiba factory settings? YES
Which OS do you use? VISTA
Do you have the same problem using headset? NO
I have narrowed it down a little more. It is only when I am connected to my wireless network. I can have Wi-Fi enabled, and connected to the internet via a mobile internet connection and there are no issues.
When I am connected via the router, I have this issue. You could say it is the router, however I have various other machines connected to the same router, without issue.
So, to clarify.
WiFi on - not connected to internet via router, however connect by other means - All ok
WiFi on - connected to the internet via router, issue.
Router is Thomson SpeedTouch 570

TECRA A11 - low sound quality earphone to AUX

Tecra A11 provides *low sound quality* (iTunes) connecting with my hifi system *via earphone out to AUX* in. An Apple MacBook connected in the same way does much better. Any idea how could enhance the quality? Thanks in advance!

Hmmmmm...... have you tried to change sound settings, player equaliser?
Open control panel and check if there is Realtek sound manager (Realtek soundcard) and play a little bit with sound effects settings.

Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

maybe there are dirt, sand and lint in the speaker output grill ?

Low sound throughput....SOLV

Similar Messages

Maybe you are looking for