Low sound when I use headphones to my iPad

When I connect my headphones to my iPad I can only hear the music very low in the background. Almost totally silent.
Even if I change the volume there is no difference. I see the volumebar change, but the sound will not be any higher.
When I disconnect the headphones I can hear the music again and the volumebar is working as it should.
What should I do?

First check that your headphones work in another device to be sure there isn't a problem with them.
Check to see if this is an issue only with music. Do you have the same problem watching videos?
If only for music, check to be sure you haven't enabled Volume Limiting by looking in Settings > Music > Volume Limit. If it's on, turn it off.

Similar Messages

  • Restore sound when not using headphones?

    Sound works only with headphones.  How can I get sound back without headphones?

         Hi William, begin by opening "System Preferences". Next proceed to "Sound" (under the "Hardware" category). Then go to the "Output" section. Select "Internal Speakers" as your output medium. Proceed to select "Sound Output" from the drop-down list titled "Use audio port for: ". Finally ensure that the "mute" checkbox is unchecked and that the volume slider is at an audible setting.

  • Why do I get static sound when I use a headset splitter iwith my macbook air 13"?

    Why do I get a static sound when I use a headset splittter with my macbook air? The headphone works perfectly but when I put the mic in the splitter, the sound gets a little bit static. Any advice will be greatly appreciated.
    Thank you!
    Cheers,
    francismba

    I suggest an appointment at an Apple store genius bar for a free evaluation.
    Perhaps an Apple Hardware Test may provide a clue:
    https://support.apple.com/en-us/HT201257
    Note that an error free AHT is not definitive.
    Ciao.

  • In my iPad mini,when my use in app streaming , there is no sound.. Can anybody help? It used to be ok before. For example, there is no sound when I use YouTube clip in a news item or magazine like pulse..

    nno sound when I use in app streaming

    Hello Saranginotes,
    After reviewing your post, I have located an article that can help with iOS audio issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • TS3173 I have mac book pro and recently bought mountain lion online i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

    I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

    Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.

  • IPad 2 has no sound unless I use headphones???

    My iPad has no sound unless I use headphones. Any suggestions? I have checked all settings, etc.

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Low sound when somebody calls me?

    I can only hear a low sound when somebody calls me, trough my ear speaker next the facetime camera. What is wrong?
    Is it the speaker that is dead? Or is it the settings?

    Go through this article - http://support.apple.com/kb/TS1630

  • When I use the inthernet with ipad it return home. What should I do?

    When I use the inthernet with ipad it return home. What should I do?

    any headphones will work, their are not any special apple ones that are needed.

  • When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

    When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

    If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

    The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
    The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

    Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
    Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
    Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

  • When I use Safari on my iPad 1/4 of the left side of the screen is grey. It seeme devoted to "shared links", "reading list", or "History". I would like to get rid of that. How can I do it?

    When I use Safari on my iPad 2, more than 1/4 of the left side of the screen is used for "shared links", "reading list", or "History". I would like to hide that. How do I do that?

    Tap the Book icon seen left of the address box.
    Best.

  • I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error!  I read the forms and done everything!  Apple I name a loyal customer, please come out with an update soon!

    I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error!  I read the forms and done everything!  Apple I name a loyal customer, please come out with an update soon!

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Hi,i have a big problem,.my ipad2 is lost,i left in public place...and then when im using the find my ipad apps.i accidentally clicked the remote wipe button,is there still way to track my ipad .thanks..

    hi,i have a big problem,.my ipad2 is lost,i left in public place...and then when im using the find my ipad apps.i accidentally clicked the remote wipe button,is there still way to track my ipad .thanks..

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
     Cheers, Tom

  • Speaker sounds bad when not using headphones

    I wanted to listen to my music on my iPhone so I started to play a song, the first song sounded fine. By the middle of the second song, the quality of the sound got really bad...full of static, almost like I had bad reception. I switched to the headset and it sounds fine.
    I guess the iPod part of the phone wasn't meant to be listened to w/out using a headset?

    I guess the iPod part of the phone wasn't meant to be listened to w/out using a headset?
    Not at all. I do so often without any problems and when listening to music via the speaker at the office, I need to keep the volume fairly low so you may have a defective speaker which is covered under warranty. I also watch movies using the speaker for sound when not in a noisy environment.
    If you live near an Apple Store, I suggest making an appointment to have this checked and if you don't, give AppleCare a call - (800) 694-7466.
    You might try a Reset first by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release ignoring the slide to turn off prompt when doing so. This does not affect any data or settings.

  • How can I make my projects in GarageBand sound the same when listening with speakers as it sounds when listening with headphones on?

    Hi, I'm trying to export a song that I made in Garageband using mutliple tracks and a backing track. It sounds great in the headphones and all the levels are good. But, once I export and listen with my speakers, the levels are different, but sound good once I plug my headphones back in. I'm hoping to use the song in a video that will play through speakers, so I really hope someone can help. I'm new to Garageband, so I could use all the help. Thank you for your time!

    What you describe has nothing to do with GarageBand.
    Every speaker system or headphones have their own characteristics which can be measured and documented with a frequency response diagram. That describes that some speakers/headphones sound more boomy or less "bright" than others, instead of neutral.
    There are a ton of other parameters that influence the sound:
    Playing too loud (for the amp or speakers) can introduce distortion that alters the sound even before you recognize it as (nasty) distortion.
    The same song sounds different when played back with different levels. This is a trick your ear is playing on you. It is documented in the Fletcher Munson curves.
    The acoustic plays a major role. With headphones, you eliminate the acoustic environment compared to your speaker that reacts to your room and any room resonance.
    The placement of your speakers. Putting them against the wall gives you a 3dB boost in the lower frequency range (depending on the room dimensions). Putting them in the corner adds another 3dB. Placing one speaker in a corner and the other one not is even worth.
    The list goes on ...
    People spend their money on all kinds of plugins and often forget that the convertes like microphone (sound comes in) and speakers (sound comes out) are the most important components (besides your ears). Investing in good speakers is a good start. When buying headphones, make sure they are real headphones and not fashion accessories like Beats.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Maybe you are looking for

  • Is there any danger in setting the system date/time to a prior date?

    We are dealing with some software digital certificate expiration issues.  Until the developer gets them fixed, the only way we can use the software is to set the date/time preferences to a date before the certificate expired.  Some users are concerne

  • Lightroom 1.4.1

    Lightroom 1.4.1 refuses to tranfer files from either of my cameras which has not happened before. It only tranfers the first few files in to Lightroom and then seems to stall. Lightroom continues to accept and download images from my memory sticks bu

  • Deleting Record from Database in PHP

    I'm trying to figure out how to delete a record from my database. I already have a recordset with my form selected. But when I try to add "Delete Record," I can never seem to figure out why it won't delete anything when I load the page in a browser,

  • SAP Printing problem

    Hi friends, I have a problem with saplpd. When ever my user tries to take print with the output device LOCL, the user is not getting the printout . Following is the saplpd error messages: <b>"Error:StartPage failed ret=0,error =Overlapped I/O Operati

  • RFC LookUp API

    Hi everybody, when usinf the RFC lookUp API in UDF you get a whole XML Document as the response. What is the easiest way to extract a special value from the InputStream . (https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-e