Low sound when somebody calls me?

I can only hear a low sound when somebody calls me, trough my ear speaker next the facetime camera. What is wrong?
Is it the speaker that is dead? Or is it the settings?

Go through this article - http://support.apple.com/kb/TS1630

Similar Messages

  • Why does every iPhone and iPad ring when somebody calls only 1 device? This started today.

    Our iPhones and iPads have been working fine until today when somebody called one device in our house, every iPhone and iPad in the house rang. Why WHY WHY!!?!! I have
    MacBook Pro 10.10.2
    iPhone 4S 7.1.1
    iPhone 4 8.1
    iPhone 5 7.1.2
    iPhone 6 8.2
    iPad 2 8.1.1
    iPad 3 8.1.2
    but the Macbook doesn't ring.

    This call was made using FaceTime for which the other devices were set to receive.

  • Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don't know what to do, please help me?

    Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

    Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

  • My N80 handset has no sound when answering calls.....

    my N80 handset has no sound when answering calls... but when i turn to my loudspeakers and plug in my earpiece, it function normally when i answer the calls...i cant hear any thing from handset when i keep near my ear, but when i on speaker i can hear the other party voice...
    a few days ago, it was fine... i didnt drop the phone or what...
    my warranty has expired... i wish that someone can help me to solve it by DIY.. haha..
    thanks...

    Sounds like it can only be one of two things.
    1. The speaker is broken.
    2. The ribbon cable connecting the two halfs of the slide is starting to go. The ribbon does give problems after a while. Sometimes when the cable starts to go, it still works when the slide is closed but not when extended. try it and see.
    Both the speaker and the ribbon cable can be replaced at your local Nokia care centre.

  • My iphone turn blank.. When somebody calling it ringging but cant answer it. Coz no button to answer, its completely blank..

    Help me.. My iphone totally blank. But when somebody call its ringging but i can not answer the call. Its blank.
    When i press all the button arround iphone, it on but directly go to camera. Then i press home button it can not functioning. It just capture the camera.. Please help me..

    Restart the phone. Hold the home button and the sleep/wake button together until the apple logo appears.

  • Sometimes E61i is not ringing, when somebody calle...

    Hi,
    I purchased Nokia E61i Phone in USA recently and update the firmware. After update the the firmware, sometimes my phone is ringing when somebody called. The calls are displayed in missed calls list. Due to that I am loosing my incoming calls. Could you please let me know how to resolve the issue.
    Regards
    Peddi
    Message Edited by peddi on 17-Jul-2008 08:27 PM

    Try this - it won't erase any of your settings, but it may clear up the buggy behavior:
    Power down phone
    Hold volume up/down & power simultaneously until you see the Boot Mode Selection Menu
    Use volume down to navigate to 'Recovery', use volume up to select
    Should see screen with triangle and exclamation point next to an Android
    Press volume up/down simultaneously to go into system recovery
    Use volume rocker to navigate to 'wipe cache' and use power button to select
    Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select
    Post back and let us know if this did the trick.  If not, we can look further...

  • When somebody call me appear as "UNKNOWN"

    When somebody call me appear as "UNKNOWN" even if i have the number in my contacts list, How i can change this?

    So the caller ID says it is from "unknown" caller and you have answered the call and it turns out to be someone you know in your contacts list?

  • No or low sound when receiving a text. Volume is fine for incoming phone calls.

    After the latest software update, I can not hear any sound when receiving a text. However I can hear sound when I receive a call.

    Hello LEC2,
    Thanks for using Apple Support Communities.
    I would first check to make sure that your sound options for your alert tones is set correctly.  Please look at the following link for more information:
    Sounds and silence - iPhone
    http://help.apple.com/iphone/7/#/iph3dd62d95
    If that doesn't resolve the issue, also take a look at this link:
    iOS: Understanding sounds, ringtones, and alerts
    http://support.apple.com/kb/HT5800
    Take care,
    Alex H.

  • I cannot get my new 5S to emit a sound when people call in. Not the "Do not Disturb".

    Whatever I have done to the 5S phone or something within it, I cannot get it to emit a noise when people call in.
    I have read recent blogs but to no avail - theproblem still exists.
    What to do?

    In the control panel is the moon black or white it should be black On side of iphone is the mute button set to red? Go to sounds and pick another ring tone are the volume button tuned up If it still will not work Try a Reset press power button & menu button hold both down together Until you see the Apple Logo you will not lose any data. Bsydd uk

  • Low sound when playing x264 vids

    alright so when i go to play some 720p or 1080p vids i get low sound to the point i can barley hear it but if its normal xvids or music files i can hear it just fine ive only had this issue on arch ive tried vlc mplayer and it does it to all i know i have the codec installed as it plays the movies etc

    if audio is ac3/dts you have to normalize it on fly while decoding
    BHH

  • Only static sustained beep sound when making calls!

    Over the past few hours I have noticed when I make a call on my iphone4s (iOs5.1.1, I have not recently updated!) I can hear the person I am calling for about 2 -5 seconds and then nothing OR just static sound and nothing from the person I am calling.
    I can send and recieve texts (over 3g Telstra network)
    I can send and receive imessage
    I can send and receive FaceTime (wifi)
    I can listen to songs and videos online and on my phone
    I can record my voice handsfree and using headphones
    I can not talk to anyone when making or receiving a call! Static or nothing!
    I have full reception
    I am with Telstra Australia
    Any ideas?

    Sounds like you have activated mute button, within a call there should be an option to unmute. The top left-hand button with a microphone does it have a / or a \ through it if so just tap it again & your voice will be heard again.
    The other possibility is that you've put calls on hold.

  • IPhone earbud microphone/clicker: Beep sound when ending call is VERY faint

    I sometimes use the iPhone earbuds to make calls. Ever since the release of iPhone software version 2.2, the beep sound that one hears when hanging up a call using the microphone/clicker is VERY faint. Now when I use the headset to make calls, I can barely even hear the beep when I end a call. I checked with another friend of mine who also uses his earbuds to make calls and he noticed the same thing.
    Has anyone else noticed this and does anyone know of a solution? I tried blowing out any lint that may have accumulated in the earphone jack, but this did nothing to improve the situation.
    Message was edited by: Randy Metzger

    Yes! Mine does it too,I miss the louder beep,on top of it I have to use head phones because Bluetooth headsets don't work anymore since 2.2,I can hear others but they don't hear me.

  • Low sound when I use headphones to my iPad

    When I connect my headphones to my iPad I can only hear the music very low in the background. Almost totally silent.
    Even if I change the volume there is no difference. I see the volumebar change, but the sound will not be any higher.
    When I disconnect the headphones I can hear the music again and the volumebar is working as it should.
    What should I do?

    First check that your headphones work in another device to be sure there isn't a problem with them.
    Check to see if this is an issue only with music. Do you have the same problem watching videos?
    If only for music, check to be sure you haven't enabled Volume Limiting by looking in Settings > Music > Volume Limit. If it's on, turn it off.

  • Very low sound when I connect guitar

    Hello
    When I connect my guitar to logic via fast track ultra I can barely hear the sound, it's so low. Instead I have to use logic plugins make it sound at normal volume. How can I get this normal?
    Kind regards
    Frankensten

    My guess is you're not plugging into a Hi-Z input.
    In other words, when DI recording a guitar, because the signal is naturally very quiet, a line level input is no good. Many interfaces these days have a designated Hi-Z input, so check (I'm not familiar with yours). If you don't have this option you can buy cheap units (DI Boxes) that do the job.
    This should solve your problem and give you the right amount of gain.
    (Again, don't rule out volcanic ash)
    Message was edited by: siderealxxx

  • No sound when making calls

    When I make or receive a call I can't hear the other person and they can't hear me. The sound works fine other than calls. I can listen to my voice mails, music, even skype still works. I've checked my settings and they are all fine. I have rebooted my phone several times. I have tried making calls in safe mode, still no luck. Help? I am using a Samsung s4

    Hello @stephr
    Sorry to hear you’re having call audio issues.
    Did this begin after a software update? Does it happen when you use the speakerphone feature?
    Have you attempted to plug in a wired headset and have audio during the call?
    If you still have no audio even with using a wired headset then most likely there’s a hardware issue and the phone would need to be replaced.
    Thanks,
    Charise

Maybe you are looking for

  • Update rules 8COBW2ENYVCAS3541UFGKPO80 read in version M

    Hi I am getting following error while transporting update rules to production server, this transport is working fine in quality server, but it is throwing error in Production only. <b>Start of the after-import method RS_UPDR_AFTER_IMPORT for object t

  • Need help with comparing cursor row to a collection

    I have been racking my brain trying to get get the code below to work properly. I am loading a table via bulk collect into a collection. I want to run code that tells me if the value of batch_REC.co_id exists or not in co.id collection. The best I ha

  • Urgent:Upgrade JRE 1.1.7 to 1.3 for Weblogic 4.5.1

    Hi! I have Weblogic 4.5.1 running on JRE 1.1.7,SPARC Solaris 2.6 platform.I need to upgrade the JRE to 1.3.I am given to understand that there are no issues about this w.r.t Weblogic(see http://www.weblogic.com/platforms/index.html#solaris).But I hav

  • Responsibility cost centre is probably not supplied or invalid, thru a Z*

    Business Scenario is to reverse the material document, thru a standard SAP tcode (Cancel Material document MBST/ MB31). However system is giving error as listed below u201CResponsibility error Message no ZA031 Diaganosis Responsibility cost centre MM

  • Firefighter Log in Error

    Hi Experts... I have configured a FFUserid, assigned to a firefighter and the Owner and the Controller. When the Firefighter try to log on, a message of "The FFUser Does not exist. message /VIRSA/VFAT621. Could anybody help me, please?