Low storage reboots - sd and internal

I synced my phone using windows phone. Apparently I loaded up all ~7GB of storage and the phone immediatly became unstable (constantly rebooting). I removed a couple apps so the phone was stable enough to start deleting the music.
So music off. I got a 16GB microSD card and insterted and formatted. Then loaded up my music again. Been working fine for a few weeks. but I am now getthing the low storage errors. Downloaded a fly delta app, and got my boarding pass. Now the phone is unstable again. The storage shows the SD card it totally full.
I removed the SD card and its working fine now.
So is this normal behavior? When the phone gets low on storage either SD or internal, should the phone constantly reboot? Should I try to delete stuff off the SD card and retry?

Yes, filling up the memory completely will cause problems with the phone and that includes SD cards.

Similar Messages

My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Trying to optimize eSATA and internal disk configurations

I'm trying to optimize the HD setup on my dual 2.5GHz G5 with 4.5GB RAM
major considerations.
- massive itunes library (260GB), and big iphoto lib (25GB) as well
- lots of video editing in Final Cut with large capture files and many video exports
- regular podcasting and other media creation with all my music and photos
- need for regular COMPLETE backups
- speed
Here's the current setup. I have six disks as part of the system
1. internal 160GB disk (maps simply to a MACHD volume)
2. internal 250GB disk (maps simply to a COMMONS volume for Democracy player files, torrent downloads etc)
then on my 4-port eSATA controller card
4x 500GB SATA drives from Western Digital for a total of 2TB eSATA disk space
they are in 2 eSATA enclosures from FirmTek
I'm managing the disks with SoftRAID
Before I get into the problem, how would YOU use this incredible amount of disk space, considering the goals I have? (video, media storage, backup).
Now, The problem
I've been disappointed with the speed of my system and suspect its my HD configuration. I have enough RAM right!?
I've got some raid stripes going on
2 of the 500GB disks (disk2 and disk3) support two "active" volumes
a) a striped ATLAS volume of 800GB (holds itunes, documents, iphoto, basically all media files)
b) a striped VIDEO SCRATCH volumn of 200GB (for working files in FCP, imovie, etc)
the other 2 of the 500GB disks (disk0 and disk1) support two "clone" volumes
a) a mirror MACHDCLONE volume on both disk0 and disk1 (to protect the system drive. I run Super Duper 3x per week)
b) a striped ATLAS_CLONE volume to backup the active ATLAS volume
the COMMONS volume is not backed up in any way. figure i can live without my Democracy files and torrents, etc.
My ideas:
based on my performance observations, my setup above is just wrong, and I don't know where to turn for the best advice. Google is very poor at dealing with such complexity in search results. There are some video advice sites, but they only cover part of my problems. I have a few theories of how I should be using these drives
1. use the eSATA drives strictly for performance benefits, not for backup. consider a USB2.0 drive for backups and use Mozy for offsite backup
2. simplify the disk allocation. No single disk should support more than one volume
3. the video scratch SHOULD be striped in order to benefit from speed. and should be on its own physical disk(s) separate from ANY other function
So I'm thinking
a) stripe two of the eSATAs into a single 1 TB array for my media or ATLAS volume
- this solves me running out of space on the volume (getting closer with the iTunes video downloads every day)
- it's also just physically easier to deal with. I can SEE what drives make up ATLAS alone
- will be easier for me to eventually replace the G5 with an MBP running its own eSATA pc card with easy access to the same ATLAS volume
this still leaves two 500GB eSATA disks around
b1) I could extend the ATLAS volume to an array including a 3rd eSATA disk for a 1.5TB volume. this would allow me to bring COMMONS files onto ATLAS
b2) the remaining 500GB eSATA disk can be video scratch
OR
c1) dedicate 1 500GB disk to VIDEO SCRATCH
and
c2) partition the other 500GB disk as a clone of both COMMONS and the internal System drive
see how CONFUSING THIS IS ?
there are too many permutations of things.
I know I like keeping the system drive simple and internal. Ideally, the second internal disk would mirror this volume, but they do not match in size or brand
part of me wants to stripe all FOUR eSATA drives into a blazing 2TB masterpiece, but it seems like a bad idea to put VIDEO SCRATCH on the same array as ATLAS
Other questions:
should the itunes library get it's own disk altogether? is striping of benefit here?
are there some sites that explain HD management well?
PowerMac G5 2.5GHz 4.5GB RAM Mac OS X (10.4.9) also own a blacbook

Thanks so much for that awesome feedback.
A few points.
I have the dual processor G5, not the quad core. Purchased in Jan 2005.
My RAM pageouts are fine (didn't know what that was until you mentioned it)
Love the idea of moving COMMONS "outside the box"
I used to have my system volume boot from an external RAID, but didn't notice a big improvement, and it meant my G5 would ONLY boot if the eSATAs were powered up. I just didn't like that feel. I want the tower to work in a self-contained fashion, even if I don't have access to all media. I want access to the OS and apps.
I'm unlikely to buy more SATA controllers and enclosers or too many new disks. I'm on a serious budget and want to work with as much of what I have as possible. That said, i just checked out the Drobo and am drooling. I'll wait to see how well it performs for data access (and video) and not just storage.
It sounds dreamy to stripe all four of the eSATAs into a 1.8TB storage megaplex. I imagine they would scream in an ATLAS_BADASS volume, but then I've got nothing left for VIDEO SCRATCH used to capture and render.
The VIDEO_SCRATCH doesn't need to be large, and I think that's where I'm having a conflict. My eSATA drives are way too big to use even ONE as a video scratch, much less striping two of those bad boys just for that purpose
Purchasing a 10K drive for video scratch (or system volume) is not really in the cards yet.
So here's where I sit now:
1. My Media Storage
++ the 4 eSATA drives (2.0TB raw)
I go with the badass steroid injected ATLAS volume striped across all four.
this is my media array and holds all the contents of ATLAS and COMMONS (iTunes, iPhoto, Documents, FCP training videos, ripped DVDs, the works)
2. My System Volume
++ the 250GB internal SATA
move COMMONS out
migrate system volume to this disk
better storage-to-free space ratio
3. My Scratch Disk
a) use the now-spare 160GB internal Maxtor (probably weak and slow)
b) get an external FW800 RAID disk from OWC
http://eshop.macsales.com/shop/firewire/hard-drives/EliteAL/StripedRAID
I'd go with the 160GB or 320GB
4. Backup Plan - level 1 - local
++ use my spare external Maxtor 250GB FW drive
clone the system volume regularly
++ get an external FW drive (like the 1TB My Book Premium II from WD)
clone ATLAS_BADASS regularly
the WD is just $400
i know it's capacity is lower than my super striped RAID, but i don't know of any cheap way to clone ATLAS_BADASS to a 1.5TB drive
5. Backup Plan - level 2 - remote
pay for a Mozy storage account which has unlimited capacity
upload system and ATLAS_BADASS every few weeks
any new thoughts? and thanks again!

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

Moved my library to an external hard drive. Now I get this message when trying to import video: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again.

I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default.

Need help, I have an error message "not enough storage" for icloud and it will not let me do anything

Need help... getting an error message "not enough storage" for icloud and it will not let me get passed the message

See if this helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Movement types corrsponds to Inbound ,Outbound and Internal transaction

Hi,
Can anyone tell me the list of movement types corresponding to the Inbound,Outbound and for Internal Transaction.
for example: movement type 101 corresponds to Inbound transaction.
Thanks

Dear Bala,
This may help you.....
Below you will find a short description of the standard movement types. The cancellation movement type is the movement type + 1 (cancellation for 101 = 102).
101 Goods receipt for purchase order or order
If the purchase order or order has not been assigned to an account, a stock type (unrestricted-use stock, stock in quality inspection, blocked stock) can be entered during goods receipt.
If the purchase order or order has been assigned to an account, the goods receipt is not posted to the warehouse, but to consumption.
In the case of non-valuated materials, the goods receipt is posted to the warehouse, although the purchase order has not been assigned to an account.
Possible special stock indicators:
o     K Goods receipt for purchase order to consignment stock
o     O Goods receipt for purchase order to stock of material provided to vendor
o     E GR for purchase order or order to
o     sales order stock
o     Q GR for purchase order or order to
o     project stock.
Goods receipt for subcontract order : at goods receipt, the consumption of the components is posted at the same time (see movement type 543)
Goods receipt for
stock transport order : at goods receipt the transported quantity is posted in the receiving plant from stock in transit into unrestricted-use stock (or stock in quality inspection, blocked stock).
103 Goods receipt for purchase order into GR blocked stock
The GR blocked stock is not valuated.
You cannot receive goods into GR blocked stock for stock transport orders.
105 Release from GR blocked stock for purchase order
Movement type 105 has the same effects as 101.
121 Subsequent adjustment for subcontracting
This movement type cannot be entered manually.
With a subsequent adjustment for a subcontract order it is possible to correct the consumption of components. In this case, the material produced by the supplier is credited with the excess consumption / under-consumption. For this reason, if there is a subsequent adjustment, an item is generated for the produced material using movement movement type 121.
Movement type 121 does not have a reversal movement type.
122 Return delivery to supplier or to production
Using movement type 122, you can distinguish real return deliveries for a purchase order or order from cancellations (102).
In the standard version, you must enter a reason for the return delivery if you are using movement type 122. In this way, evaluations of return deliveries are possible.
The effects of movement type 122 correspond to a cancellation of movement type 101.
123 Reversal of return delivery
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123.
Movement type 123 has the same effects as movement type 101.
124 Return delivery to vendor from GR blocked stock
Using movement type 124, you can return a goods receipt to GR blocked stock (103).
Movement type 124 has the same effects as movement type 104.
125 Return delivery from GR blocked stock - reversal
If you returned a goods receipt to GR blocked stock using movement type 124, you can reverse the return delivery using movement type 125.
Movement type 125 has the same effects as movement type 103.
131 Goods receipt for run schedule header
This movement cannot be entered manually. It is generated automatically at notification of goods receipt for a run schedule header.
Possible special stock indicators: E und Q
161 Return for purchase order
If a purchase order item is marked as a returns item, the returns to vendor are posted using movement type 161 when the goods receipt for purchase order is posted.
Movement type 161 has the same effects as movement type 122.
201 Goods receipt for a cost center
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
o     K: Goods withdrawal from
o     consignment stock
o     P: Goods withdrawal from pipeline
If you have withdrawals from consignment stock and from pipeline, payables to suppliers ensue.
221 Goods issue for a project
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: K, Q
231 Goods issue for a customer order (without SD)
You use this movement type if you want to process the delivery without SD.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: E, K, Q
241 Goods issue for an asset
The goods can only be withdrawn from unrestricted-use stock.
Special stock indicator: K
251 Goods issue for sales (without customer order)
Use this movement type if you have not entered a customer order in SD. In the standard system, the movement is assigned to a cost center. kontiert.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: K
261 Goods issue for an order
This refers to all withdrawals for orders (for example, production order, maintenance order, except customer orders.
Possible special stock indicators: E, K, P, Q, W
The goods issue can be posted manually in Inventory Management or automatically when an order is confirmed or via an SD delivery.
281 Goods issue for a network
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: E, K, P, Q
The goods issue can also be posted via an SD delivery.
291 Goods issue for any arbitrary account assignment
With this movement type, all account assignment fields are ready for input. You can assign the movement to an arbitrary account assignment object.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators: E, K, P, Q
301 Transfer posting plant to plant in one step
The quantity is transferred from unrestricted-use stock in the issuing plant to unrestricted-use stock in the receiving plant.
Possible special stock indicators: O, V, W
303 Transfer posting plant to plant in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing plant to stock in transfer in the receiving plant.
For technical reasons, you cannot carry out transfer postings from plant to plant in two steps for split-valuation materials.
Removal from storage can be posted via an SD delivery.
305 Transfer posting plant to plant in two steps - placement in storage
The quantity is posted from
stock in transfer to unrestricted-use stock in the receiving plant. The movement is not valuated.
You can enter the goods receipt with reference to the SD delivery.
309 Transfer posting material to material
The quantity is posted from unrestricted-use stock of the issuing material into unrestricted-use stock in the receiving material
Prerequisite: both materials have the same stockkeeping unit.
Possible special stock indicators: E, O, Q, V, W
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators: E, K, M, Q
See also 321, 343, 349, 455 for other stock types.
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
315 Transfer posting storage location to storage location in two steps - placement in storage
The quantity is transferred from the
stock in transfer to the unrestricted-use stock in the receiving storage location.
317 Creation of a structured material from constituent components (Retail)
A material split into its components using movement type 319 can be rejoined using movement type 317.
Movement type 317 has the same effect as a cancellation of movement type 319.
319 Split structured material into components (Retail)
You can enter the splitting of a structured material manually using movement type 319.
You can configure Customizing so that a structured material (for example, (z.B. set, prepack or display) is automatically split into its components at goods receipt. The system posts the split using movement type 319. In this process, the BOM header material is posted and each of the component stocks are increased. You can also use this function if you use the Warehouse Management System (WM).
Example:
A box of the structured material S contains 3 pieces of the component K1 and 4 pieces of the component K2. The following material document items result after the material is split at goods receipt:
     Qty      Unit      Material      Movement type
     1      box      S      101 +
     1      box      S      319 -
     4      piece      K1      319 +
     5      piece      K2      319 +
321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here it is possible to post the quantity to another storage location.
This movement type is not possible for QM-managed materials since the transfer posting for these materials takes place using the usage decision.
Possible special stock indicators: E, K, O, Q, V, W
323 Transfer posting storage location to storage location - stock in quality inspection
The quantity is transferred from stock in quality inspection in the issuing storage location into stock in quality inspection in the receiving storage location.
Mögliche Sonderbestandskennzeichen: E, K, Q
325 Transfer posting storage location to storage location - blocked stock
The quantity is transferred from blocked stock in the issuing storage location into blocked stock in the receiving storage location.
Possible special stock indicators: E, K, Q
331 Withdrawal of sample from stock in quality inspection
333 Withdrawal of sample from unrestricted-use stock
335 Withdrawal of sample from blocked stock
The sample is destructive, that is, the withdrawal has the same effects as scrapping.
Possible special stock indicators: E, K, Q, V, W
341 Change in status of a batch (available to not available)
This goods movement is automatically created when there is a change in the status of a batch and it is also used to transfer the unrestricted-use stock into restricted-use stock.
Possible special stock indicators: E, K, M, O, Q, V, W
343 Transfer posting blocked stock - unrestricted-use stock
349 Transfer posting blocked stock - stock in quality inspection
The quantity is transferred from blocked stock to unrestricted-use stock (343) or stock in quality inspection (349).
Here it is possible to transfer the quantity to another storage location.
Possible special stock indicators: E, K, Q
351 Goods issue for a stock transport order (without SD)
The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
Movement type 351 is only used if the goods issue is posted without an SD delivery. A goods issue for a stock transport order with SD delivery is posted using movement type 641 or 643.
The transfer posting is also possible for materials valuated separately.
The goods issue for a stock transport order takes place using movement type 101.
Possible special stock indicators: E, Q
For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.
401 Transfer of sales order stock into company's own stock
(no longer available as of Release 4.0C)
The quantity is transferred from unrestricted-use sales order stock (non-valuated) into unrestricted-use storage location stock (valuated). For this movement, a special stock indicator is not required.
It is possible to change the material number using this movement - if the material is managed in the company's own stock under a different material number (for example, for materials that can be configured).
403 Transfer of consignment stock to company's own stock
(no longer available as of Release 4.0C)
The quantity is transferred from unrestricted-use consignment stock into unrestricted-use storage location stock and thus taken into the valuated stock. This results in a payable for vendors. For this movement, a special stock indicator is not required.
405 Transfer of project stock to company's own stock
(no longer available as of Release 4.0C)
The quantity is transferred from unrestricted-use project stock to unrestricted-use storage location stock. A special stock indicator is not required for this movement.
411 Transfer of special stocks E, K, and Q to company's own stock
The quantity is transferred from unrestricted-use special stock E ( sales order stock ), unrestricted-use special stock K ( consignment stock) and unrestricted-use special stock Q ( project_stock ) to unrestricted-use storage location stock. The corresponding special stock indicator is required for this movement.
If you do not use the special stock indicator, the system uses this movement type and movement type 311.
For sales order stock, you can change the material number for this movement if you manage the material in your company's own stock under a different material number (for example, for configurable materials).
Consignment stock is transferred to valuated stock, thus resulting in a vendor liability.
441 Transfer posting non-tied to tied empties
Part of the stock of an "empties" material assigned to a full product is managed in the stock type "tied empties".
Empties stock not assigned to a full product forms part of the stock type "unrestricted-use".
Using movement type 441, you can make a transfer posting for an empties material from the stock type "unrestricted-use" to the stock type "tied empties". Movement type 442 reverses this transaction.
Example:
The full product "beer" has a stock of 15 cases. Part of the empties components "bottle" and "case" is tied empties stock.
     Material      unrestricted-use      tied empties
     Beer      15
     Bottle      240      360
     case      10      15
451 Returns from customers (without SD)
Using movement type 451, you post customer returns without an SD returns delivery into blocked stock returns . The blocked stock returns are not valuated.
No special stock indicator possible.
See also 453, 651, 653
453 Transfer posting blocked stock returns to unrestricted-use stock
457 Transfer posting blocked stock returns to quality inspection stock
459 Transfer posting blocked stock returns to blocked stock
The quantity is transferred from blocked stock returns to unrestricted-use stock (453), quality inspection stock (457) or blocked stock (459) and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
455 Transfer posting storage location to storage location - blocked stock returns
The quantity is transferred from blocked stock returns of the issuing storage location to blocked stock returns of the receiving storage location.
501 Goods receipt without purchase order - unrestricted-use stock
503 Goods receipt without purchase order - stock in qual.inspection
505 Goods receipt without purchase order - blocked stock
These movement types are used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Mögliche Sonderbestandskennzeichen: E, K, M, Q
Bei einem Wareneingang zur Bestellung (101) kann der Zugang von
Mehrwegtransportverpackung als zusätzliche Position mit 501 und Sonderbestandskennzeichen M erfaßt werden.
511 Free-of-charge delivery from vendor
The quantity is posted to unrestricted-use stock. If there is a material with moving average price, the moving average price is reduced accordingly.
521 Goods receipt without order - unrestricted-use stock
523 Goods receipt without order - stock in quality inspection
525 Goods receipt without order - blocked stock
The movement types are used for deliveries from production that are not based on a delivery.
Possible special stock indicators: E, Q
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with 531 (instead of 261). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as another type of goods receipt.
Possible special stock indicator: E, Q
See also: 545 and 581
541 Transfer posting unrestricted-use stock - stock of material provided to vendor
WIth the movement type you provide the subcontractor with the components required for subcontract orders . The quantity is posted into unrestricted-use stock of material provided to vendor.
If there is a goods receipt for a subcontract order (101), the consumption of components is posted from this stock.
Special stock indicator cannot be used.
The transfer posting can be posted via an SD delivery.
543 Consumption from stock of material provided to vendor
This movement cannot be entered manually.
The consumption of components for a subcontract order is posted using goods receipt for purchase order (101). It can be corrected by means of a subsequent adjustment.
Possible special stock indicators: E, Q.
For the special stock indicators E and Q, you must ensure that the quantity is not removed from the stock of material provided to vendor, but from the unrestricted-use sales order or project stock.
545 Goods receipt from by-product from subcontracting
If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted during goods receipt for purchase order or during the subsequent adjustment.
Possible special stock indicators: E, Q
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
551 Scrapping from unrestricted-use stock
553 Scrapping from stock in quality inspection
555 Scrapping from blocked stock
Possible special stock indicators: E, K, Q
561 Initial entry of stock - unrestricted-use stock
563 Initial entry of stock - quality inspection
564 Initial entry of stock - blocked stock
During initial entry of stock balances, you enter the physical warehouse stock frigures or the book inventory from your old system into the SAP System for productive operation. This data entry usually takes place by means of batch input.
Possible special stock indicators: E, K, M, O, Q, V, W (565: only E, K, Q)
571 Goods receipt for assembly order to unrestricted-use
573 Goods receipt for assembly order to quality inspection
575 Goods receipt for assembly order to blocked stock
This movement cannot be entered in Inventory Management, but only in repetitive manufacturing using the function "Goods receipt for sales order".
Possible special stock indicators: E, K, Q
581 Goods receipt of a by-product from the network
The goods receipt of a by-product usually refers to a network , but can be entered without reference.
If a component is entered with a negative quantity in the network, a reservation is created with 581 (instead of 261). The receipt of a by-product can be entered during the withdrawal for the network or as another type of goods receipt.
Possible special stock indicators: E, Q
601 Goods issue for delivery (SD)
This movement cannot be entered manually. It is created automatically in SD using the function "Goods issue for delivery".
The quantity is taken from unrestricted-use stock.
Possible special stock indicators: E, K, Q
621 Transfer posting unrestricted-use - returnable packaging (SD)
This movement is generated by SD.
The quantity is transferred from unrestricted-use stock to the returnable packaging stock at customer .
623 Goods issue from returnable packaging stock at customer(SD)
This movement is generated by SD.
This quantity is withdrawn from unrestricted-use returnable packaging stock at the customer.
631 Transfer posting unrestricted use - customer consignment stock (SD)
This movement is generated by SD.
The quantity is transferred from unrestricted-use stock to consignment stock at customer.
633 Goods issue from customer consignment (SD)
This movement is generated by SD.
The quantity is withdrawn from unrestricted-use consignment stock at the customer.
641 Goods issue for a stock transport order (SD)
This movement is generated by SD.
The quantity is transferred using an SD delivery from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
The goods receipt for the
stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery.
Possible special stock indicators: E, Q
For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.
See also: 351, 643
643 Goods issue for a cross-company stock transport order (SD)
This movement is generated by SD.
It is used only for cross-company stock transport orders with SD billing and invoice. The quantity is withdrawn from the unrestricted-use stock of the issuing plant. No stock in transit is created here. In the second step, the goods receipt must be entered.
Siehe auch: 351, 641
645 Goods issue for a cross-company stock transport order in one step
(SD)
This movement is generated by SD.
Unlike movement type 643, when a goods issue is posted using movement type 645, a goods receipt line is generated automatically.
647 Goods issue for a stock transport order in one step (SD)
This movement is generated by SD.
Unlike movement type 641, when a goods issue is posted using movement type 647, a goods receipt line (101) is generated automatically.
651 Returns from customer (SD)
This movement is generated by SD.
Using movement type 651, you post returns from a customer with the SD returns delivery to blocked stock returns . The blocked stock returns are not valuated.
Special stock indicators not possible.
See also: 451, 453, 653
653 Returns from customer (SD) to unrestricted-use stock
655 Returns from customer (SD) to stock in quality inspection
657 Returns from customer (SD) to blocked stock
These movements are generated by SD.
With these movement types you post returns from the customer with SD returns delivery directly to the valuated stock.
Possible special stock indicator: E
See also: 451, 453, 651
661 Returns to vendor via SD delivery
As with movement type 502, a return delivery to the vendor is entered without reference to the purchase order, but the goods issue is posted via an SD delivery.
671 Returns for stock transport order via SD delivery
If a purchase order item is marked as a returns item, when a goods receipt for a stock transport order (101) is posted, the return is posted to stock in transit using movement type 161. When the return arrives, the issuing plant posts the goods receipt for the return using movement type 671. Movement type 671 (like movement types 352 and 642) reduces the receiving plant's stock in transit and increases the the issuing plant's unrestricted-use stock.
701 through 708: Inventory differences in MM
These movements are generated automatically during inventory difference posting in Inventory Management.
711 through 718: Inventory differences in MM-WM
These movements are generated when you post the inventory differences from Warehouse Management to Inventory Management.
721 - Sales value receipt - not affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (total sales price revaluation on the posting date).
731 - Sales value receipt - affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (partial sales price revaluation on the posting date).
Regards
Ravi

Customize daily email alerts for low storage on drive on server

Hey, Hi, All,
Thanks for the fantastic discussions, information, advice here. Great stuff.
We have a server that sends email alerts for low storage on the file server. And we like those. But it is alerting us to low storage on the TimeMachine drive. We dont want it to alert us for the TimeMachine drive but we do want to be alerted to the other drives. We have seen a little bit of hacking going on out there on the interwebs but not yet anything that seemed quite enterprise-grade.
If any one knows how to instruct the OS to monitor some disks but not other disks, please let us (and everyone else) know.
Thanks much.
Jason

Hi @unslog,
I see by your post that you would like to know how to monitor the toner. If it is possible to be emailed notification. I can help you.
Unfortunately there isn't a way to be emailed notification of the toner level that I am aware of.
You might be able to get a App to do this. I did come across this forum that you may take a look at.
Email notifications on Network Printer Ink/toner level.
You can check the toner level a few ways.
Toner-level status light on the printer. You do not need to replace the supply at this time unless print quality is no
longer acceptable.
Access the printer's Embedded Web Server, by typing the IPv4 address in the address bar of a web browser. If the printer is networked.
Print a Supplies Status Page. On the printer, go to Setup, Reports, Supplies Status.
If you are using the older ePrint website, you should be able to view the toner levels there. If you are now using the HP Connected web site, it should provide any errors for the printer, but I don't believe it will show the toner levels.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Your system is low on disk space and elements organizer cannot perform this operation

your system is low on disk space and elements organizer cannot perform this operation is the error message i keep getting. i have emptied my recycle bin and got rid of some software that i don't use and im still getting the error. Any Suggestions?

As you might be aware, when you apply auto-fix, a new file (of almost equal size) is created on HDD. This issue might arise if you don't have sufficient hard disk space on the drive which contains the source image. Do you have enough storage space available on your HDD?
~Andromeda

Low storage message

Is there a limit on the number of photos you can place on an event? I received an error message stating it can not upload due to low storage.

To install an app you need storage available that is between two and three times the file download size. you need to delete items from the iPod.

Why does my iPhone 5 constantly say I have low storage when there is 11GB free on iCloud?

There is only 438 MB available on my iPhone, however there is 11.6 GB available on the iCloud- so why do I constantly have low storage messages?

Probably because it's running out of storage on the phone itself. Your iCloud storage does not give you more storage on your phone. It only gives you more space for your synced data, iCloud email and backups.
You can check the availabe space on your phone by going to Settings>General>Usage. If you're running low, you'll have to delete or sync some data off in order to free up space.

Problems in Boot Camp with Wifi and internal speakers

I loaded boot camp from Leopard with no known issues on installation. However, my wireless and internal speakers, which work fine in Leopard, do not work in Boot Camp. I'm guessing it's a driver problem, but I don't know how to proceed. I've tried reinstalling...
Any help is appreciated.
Kerry

Hi Kerrywm, I have exactly the same problem. I can get my Apple Bluetooth keyboard to work fine after I set it up using a wired keyboard. But after a single reboot, the wireless keyboard is 'lost' in Windows XP. It's a real nuisance, it's like the Bluetooth 'preferences' for the keyboard are not remembered by Windows XP after restart. One exception however, after restart, seems to be that the top right hand key, the CD eject key on the keyboard, does work as a '+ volume' control key - its really odd! Fox.

Dual setup for internet and internal access

Goal: To set up an Xserve that is both hosting public web sites and internal websites. The server is currently connected to the internet via ethernet 1 and to our internal network via ethernet 2. It serves as a backup failover for our main web server and hosts an internal wiki. The wiki is getting more sensitive company information so we want to cut it off from outside access and guarantee that it cannot be hacked or otherwise seen. Someone mentioned a solution using partitioning of some kind to achieve this separation. I haven't been able to find information on this. Can anyone tell me more about what this may be or suggest a setup that will accomplish the same security.

Here, you have two NICs within one security context.
A security breach made via one NIC can generally gain access to another NIC within the context of a single operating system. Once the [security of the box is breached|http://labs.hoffmanlabs.com/node/1214] sufficiently to cause you problems (whether data exposures, deletions, defacement or otherwise), then the entire box is generally considered to be untrustworthy.
If the breach arrives via http port 80 (and that is a typical web server breach), then (once the breach is made) the box itself is compromised. The firewall block here doesn't get you the degree of isolation provided by a DMZ; a breach via port 80 inward or one of these recent browser-based attacks on the firewall aren't necessarily blocked. (Whether the particular web environment is directly vulnerable to a breach is another and open question. Some environments can be more vulnerable to others, but there's the common assumption that all web-facing and internet-facing environments can potentially be vulnerable. That also ties back to how the box is managed and monitored, and how fast a breach can be detected and isolated and sealed and cleaned up.)
Some operating systems feature technologies known as sandboxes or jails or such, and sandboxes (and jails) are not AFAIK officially available on Mac OS X Server. These are part-way between the default configuration and what's provided by operating as a VM guest. If you really want to learn the innards of the configuration sufficiently, you might be able to get a jail or sandbox or such going, but then tossing another Mac Mini at the problem solves it in what is usually a more supportable fashion than getting a sandbox or jail going and maintaining the configuration over Mac OS X Server patches and upgrades, and application installations and upgrades, and thus at lower cost.
The approach using a VM tries to avoid extending the exposure by requiring the attacker to breach the underlying VM to get further from the box, and approaches based on a DMZ and on multiple boxes also try to contain or firewall a compromised system.

Low storage space

i have deleted apps on my i pod but it still comes up with low storage space, help?

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
I suspect that the "other" category is large. like > 1Gb and that it contains corrupt file. Restore the iPod delete the corrupted files.

Low storage reboots - sd and internal

Similar Messages

Maybe you are looking for