Low vibration when plugged into a 220v outlet

Has anyone ever experienced a low vibration coming from their macbook pro when plugged into/ charging from a 220v source?

I noticed that, if my MB is charging whilst plugged into a 4-way adaptor plug (along with other things), such as a lamp, my mobile phone and a heated blanket, this causes the mild vibration on my MB case. I then discovered that unplugging the heated blanket from the 4-way adaptor causes the vibration to instantly stop. Leaving the phone charging and the lamp turned on appears to have no effect on the vibration at all.
So, if you're charging/operating other things/devices from the same adaptor (power source) as you're charging your MB from, then try unplugging these and just leaving the MB to charge form this power source on its own... see if that makes any difference.
It stopped the vibration for me anyway.

Similar Messages

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

When I connect it to my iMac (with up-to-date OS X Yosemite 10.9.5) - it doesn't work.
Specifically - iTunes automatically launches, but then quickly shows a dialog window that says, "iTunes could not connect to the iPhone. This device is no longer connected."
Meanwhile - on my iPhone - in the upper right-hand corner (where the battery life is displayed) - you can see the "plugged in" icon (lightening bolt) rapidly blinking on and off.
In other words - it seems like, when it's plugged in - it's rapidly connecting and disconnecting (several times per second).
If I click "OK" on that dialog window on iTunes - it instantly pops back up, and continues to do so as long as I keep the iPhone plugged in.
I have tried all and stile did not resolve my problem. I tried to restart both devices, try different cable (I have original cable). Both devices are new and software's are update it on latest versions.
Thanks in advance for any help!

IPhone 5 becomes unresponsive when plugged into a wall outlet with built in USB outlet

I installed 4 wall outlets today each that has a single 110 power outlet with two USB ports as well. When my iPhone 5 is plugged in with my factory lightning to USB cable, the touch screen becomes basically unresponsive. It must be being over powered. But the iPad mini functions normally when plugged in there. I assume it's because it's a bigger device and can handle the additional power.

Update
I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

Can i stop vibration when plugged into power source?

Hi Folks,
First time poster,
my wife is heavily pregnant and has been going to bed about 7pm, everytime I sneak into bed later on the night and plug my Iphone 4s into power to charge in DnD mode it vibrates and wakes her, she is getting really annoyed with this now and suggests I get an Andriod phone like the one she owns which does not do this.
How Can I stop the viration when I plug the phone into power? I do not wish to hack or cannibalise my Iphone. I need my phone next to the bed as I use it as my alarm clock and for emergencies.
thanks
J

If you don't mute the phone using the mute switch on the side, it will not vibrate plugging it into the charger or dock. But it will make a short sound instead.
You can suggest this feature here:
Apple - iPhone - Feedback

HT4623 My iPhone 4 will not charge when plugged into computer or outlet.

All software is up to date and I have used two different USA cords and neither will charge my iPhone 4.

Clean out the docking port of the phone.

My iPod only works when plugged into a wall socket!

Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
Any ideas??

Sounds like a dead battery. You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
B-rock

HT4060 My iPad Mini and My iPhone 4s stopped charging when plugged into and outlet. On the same day and i've tried numerous adapters . It will charge when turned off only or plugged into a computer

My iPad Mini and my iPhone 4s stopped charging on the same day when plugged into an outlet if they are turned on. My phone charged as long as it was turned off and it will charge when pluged into an USB port,
Anyone else have this problem?

Youngsavage6oo wrote:
I have had my iphone 4s for only a couple months and it was charging fine and I unplugged it and when it got low I plugged it back in and wouldnt charge so I tried plugging it into the computer and its chargeing but I dont know what to do I need help
Its charging, whats the issue then?

My iPad2 won't charge when plugged into an outlet.

My iPad 2 won't charge when plugged into an outlet. I've tried 12W and 10W original Apple iPad chargers as well as iPhone 4 chargers. It charges (very slowly) when I plug it into my laptop but I've tried every outlet in my house and at work with no success. So I am stumped as to why it won't work in two completely different locations when plugged into the outlet - because it's obviously not the charger, cable or the iPad batter.
I've tried blowing out dust from the port, resetting my iPad (holding down the home and power buttons at the same time) and jiggling the cable.
Note: I am still on iOS 6 so upgrading my OS isn't the issue.
I would appreciate any assistance with this as it's very frustrating!

If it will charge when connected to the computer, but very slowly, typical of a low power USB port, but will not charge with the chargers you have tried, the issue is then most likely with the chargers. However, to be sure, take the iPad and charger and cable to an Apple store genius bar and have the technicians test them to see where the problem is occuring.

Works when plugged into wall outlet only

My ipod works only when it's plugged into the wall outlet. When I unplug it from the wall it works for about 2 seconds, says it has a low battery and dies. When it's in the wall it says it's fully charged. Can't reset, can't restore. Any ideas?

Let the batteryd rain fully, then charge it via USB.
-Taps-

How to recover music? iPod only works when plugged into wall outlet

My iPod is probably 5 years old or so. It's been acting up for a while and I stupidly, did not back it up.
The battery was replaced this weekend so it works when plugged into the wall. It will not power on or do anything when not plugged into the wall. When plugged into the wall charger, it can turn on and says it is charging. It can be used then but as soon as it is unplugged, it's dead.
When it is plugged into the computer, it says "Charging. Please wait...". There isn't enough power from my laptop to power the iPod, so my computer doesn't even recognize it. It does not show up in iTunes.
On the brightside, I have a new iPod classic waiting to be used. However, I would VERY much like to get my 90gb+ off of my old iPod first. Is there a way to do this?
I'm at a loss. Some of the files are on there are not anywhere else. I have a few songs by a friend who lost them on their own computer.
Any help would be very appreciated!

Bump. Is there no way to solve this?

HT1386 When an iPhone is plugged into the wall outlet and is synced with iTunes, does the phone need to be ejected on iTunes like it would be if connected to the computer, or is it just fine to disconnect from the wall?

I am wondering if I need to eject my iPhone from iTunes or if it is fine to unplug the phone without ejecting.

If it's connected to your computer and synced with iTunes you should eject it. If it's only plugged into a wall outlet and not your computer, just unplug it (since there's nothing to eject it from).

IPhone 4 registers that it is getting a charge (vibrates when plugged in) but is not charging

My iPhone 4 registers that it is getting a charge (vibrates when plugged in) but is not charging. The charging display shows the fully charged symbol and not the charging symbol. I have tired charging using two different cords and into both my computer and an outlet.

Thanks Jennifer. I have done some searching and nothing firm came up. I have also tried a hard resent, both with it plugged in and without. I have an appointment at the apple store tomorrow. I too think a restore or new battery is in my future. Thanks again!

BSOD when plugging into Dynadock U3

Hi There,
We have a wide number of Toshiba Dynadock u3.0's working with a number of Sony Vaio Laptops. In the main they have worked pretty well, and have improved over time as new releases have come out.
At the moment we are rolling out the new Sony Vaio Pro laptops, and Dynadock is almost essential for users because the Vaio Pro's do not have an ethernet adapter. We are also downgrading them to Windows 7 from Windows 8 as we are not ready for Windows 8 on a large rollout, and holding off till 8.1 goes live.
We have had a couple of blue screen of deaths on 2 Vaio Pro's when plugging into the Dynadock. Both have the latest dynadock drivers, and we have obtained the memory dump for the machines. Before they were plugged in, they were on the WLAN in the office.
The other half a dozen devices we have in use at the moment have not yet reported this issue, and the BSOD has appeared on these two devices only once each, but I was asked to report this issue on these forums to just confirm there is no obvious issue with the Dynadocks.
In the meantime we have 3 other Vaio pros which are being tested and have not yet experinced the same issue.
Memory Dump below:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Scratch\100813-9796-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`020dc022?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00226022?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.22411.amd64fre.win7sp1_ldr.130801-1934
Machine Name:
Kernel base = 0xfffff800`03263000 PsLoadedModuleList = 0xfffff800`034a76d0
Debug session time: Tue Oct 8 11:46:36.236 2013 (UTC + 1:00)
System Uptime: 0 days 3:57:23.966
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 1000009F, {4, 258, fffffa800672db50, fffff80000b9c3d0}
Unable to load image \SystemRoot\system32\drivers\DNPFW.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DNPFW.sys
*** ERROR: Module load completed but symbols could not be loaded for DNPFW.sys
Probably caused by : tcpip.sys
Followup: MachineOwner
0: kd> !analyze -v
*                        Bugcheck Analysis                                    *
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
   subsystem.
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa800672db50, The thread currently holding on to the Pnp lock.
Arg4: fffff80000b9c3d0
Debugging Details:
DRVPOWERSTATE_SUBCODE: 4
IMAGE_NAME: tcpip.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51d78659
MODULE_NAME: tcpip
FAULTING_MODULE: fffff88001800000 tcpip
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
STACK_TEXT:
fffff880`03507ed0 fffff800`032cb972 : fffffa80`0672dc10 fffffa80`0672db50 00000000`00000000 00000000`0000000d : nt!KiSwapContext+0x7a
fffff880`03508010 fffff800`032dcd8f : 00000000`00000001 00000000`00000000 00000000`00000000 fffff880`01801d60 : nt!KiCommitThreadWait+0x1d2
fffff880`035080a0 fffff800`03332ee6 : fffff880`01801d00 fffff880`00000000 00000000`00000000 00000000`00000000 : nt!KeWaitForSingleObject+0x19f
fffff880`03508140 fffff880`0180289a : fffffa80`07609a10 fffffa80`071db1a0 00000000`00000000 fffffa80`000e0082 : nt! ?? ::FNODOBFM::`string'+0x12ef6
fffff880`035081b0 fffff880`0174f375 : fffffa80`0a1cf8d0 fffffa80`00000000 fffff880`03508438 fffffa80`071db1a0 : tcpip!FlUnbindAdapter+0xaa
fffff880`03508280 fffff880`01760adf : fffffa80`071db1a0 00000000`00000000 fffffa80`0a3357c0 00000000`00000000 : ndis!ndisUnbindProtocol+0x205
fffff880`03508390 fffff880`01761c5b : 00000000`00000001 fffffa80`071db1a0 fffff880`03508420 00000000`00000001 : ndis!ndisCloseMiniportBindings+0x2df
fffff880`035084a0 fffff880`016fabc2 : fffffa80`071db1a0 fffffa80`071db1a0 fffffa80`0cecfc10 fffffa80`071db1a0 : ndis!ndisPnPRemoveDevice+0x25b
fffff880`03508640 fffff880`01764dc1 : 00000000`00000000 fffffa80`0cecfc10 00000000`00000000 fffffa80`071db1a0 : ndis!ndisPnPRemoveDeviceEx+0xa2
fffff880`03508680 fffff880`01ba6537 : 00000000`00000300 00000000`00000000 fffff880`03508848 00000000`00000000 : ndis!ndisPnPDispatch+0x862
fffff880`03508720 00000000`00000300 : 00000000`00000000 fffff880`03508848 00000000`00000000 00000000`00000020 : DNPFW+0x9537
fffff880`03508728 00000000`00000000 : fffff880`03508848 00000000`00000000 00000000`00000020 00000000`000007ff : 0x300
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
Followup: MachineOwner
0: kd> lmvm tcpip
start             end                 module name
fffff880`01800000 fffff880`019fe000   tcpip      (pdb symbols)          c:\symbols\tcpip.pdb\494FAD1F538A4ED5A2BF3CC62A5FFFCB2\tcpip.pdb
    Loaded symbol image file: tcpip.sys
    Mapped memory image file: c:\symbols\tcpip.sys\51D786591fe000\tcpip.sys
    Image path: \SystemRoot\System32\drivers\tcpip.sys
    Image name: tcpip.sys
    Timestamp:        Sat Jul 06 03:52:09 2013 (51D78659)
    CheckSum:         001D78AE
    ImageSize:        001FE000
    File version:     6.1.7601.22378
    Product version: 6.1.7601.22378
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.6 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     tcpip.sys
    OriginalFilename: tcpip.sys
    ProductVersion:   6.1.7601.22378
    FileVersion:      6.1.7601.22378 (win7sp1_ldr.130705-1532)
    FileDescription: TCP/IP Driver
    LegalCopyright:   © Microsoft Corporation. All rights reserved.

Same user, different error, but still a BSOD.
Turning on the laptop when plugged into the dynadock, and he gets a BSOD. I've pasted the bugcheck in below. We are in the process of uninstalling and reinstalling all the drivers, and replacing his dynadock with a known good one to determine if the issue resides with the laptop or not.
*                        Bugcheck Analysis                                    *
ACPI_BIOS_ERROR (a5)
The ACPI Bios in the system is not fully compliant with the ACPI specification.
The first value indicates where the incompatibility lies:
This bug check covers a great variety of ACPI problems. If a kernel debugger
is attached, use "!analyze -v". This command will analyze the precise problem,
and display whatever information is most useful for debugging the specific
error.
Arguments:
Arg1: 0000000000001000, ACPI_BIOS_USING_OS_MEMORY
   ACPI had a fatal error when processing a memory operation region.
   The memory operation region tried to map memory that has been
   allocated for OS usage.
Arg2: 0000000000000000, The high portion of the physical address of the memory region.
Arg3: 0000000000000ff0, The low portion of the physical address of the memory region.
Arg4: 0000000000000025, The length of memory being mapped.
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA5
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff88000fa330f to fffff8000328cf40
STACK_TEXT:
fffff880`03723a58 fffff880`00fa330f : 00000000`000000a5 00000000`00001000 00000000`00000000 00000000`00000ff0 : nt!KeBugCheckEx
fffff880`03723a60 fffff880`00fa5cfe : 00000000`00000ff0 00000000`00000000 00000000`00000000 fffffa80`07d59000 : ACPI!MapPhysMem+0xcf
fffff880`03723ab0 fffff880`00fae0c0 : fffffa80`07d684f0 fffffa80`07d59000 00000000`00008000 00000000`00000000 : ACPI!OpRegion+0x136
fffff880`03723af0 fffff880`00fa8ac2 : fffffa80`07d59000 00000000`00000000 00000000`00008000 00000000`00000000 : ACPI!ParseTerm+0x17c
fffff880`03723b30 fffff880`00fa61a6 : fffff880`00fb90e0 fffff880`00fb9ac0 fffffa80`0671d740 fffff880`00fb90e0 : ACPI!RunContext+0x86
fffff880`03723b70 fffff880`00fa1054 : fffff880`00fb91e8 fffff880`00fb9ac0 fffffa80`0671d740 fffffa80`099f09a8 : ACPI!StartTimeSlicePassive+0x8a
fffff880`03723ba0 fffff800`0352d6ee : fffffa80`066d0b50 00000000`00000080 00000000`00000001 00000000`00000000 : ACPI!ACPIWorkerThread+0xd8
fffff880`03723c00 fffff800`0327df26 : fffff880`03100180 fffffa80`066d0b50 fffffa80`06748660 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03723c40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
ACPI!MapPhysMem+cf
fffff880`00fa330f cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: ACPI!MapPhysMem+cf
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: ACPI
IMAGE_NAME: ACPI.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79294
FAILURE_BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
Followup: MachineOwner

IPhone 4S only powers on when plugged into a wall charger, stuck in bootloop

Today I went to get my phone's screen fixed. At first, the problem was that the phone was rebooting every 3-4 minutes. Then, after it died, it doesn't power on anymore, except when it is plugged into a wall charger. However, it is stuck in a bootloop, where it shows the apple logo for about 7 seconds, then the screen goes black for about 5 seconds, then repeats. I can't unplug it or else the phone goes dead, and plugging it into my computer results in the same deadness. I've tried DFU Mode, Recovery and everything else when plugged into my computer, but it remains dead and black screened. The phone is not picked up at all, it doesn't power on or anything. It only powers on when it is wall charged, but it will bootloop. I can't get past this, and there is no way I can restore it. Help?

Your battery is dead. You will have to replace it see article:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

Low vibration when plugged into a 220v outlet

Similar Messages

Maybe you are looking for