Low Voltage Charge "download"??

Is there such a thing as a download available (latest version) or something I can change in my settings to make my Ipod Classic play more than 3 hours? We're using a brand-new Numark dual-Ipod mixer (to DJ at dances) & one of the biggest selling points was that one no longer had to be concerned about keeping the backlight on as the mixer (with both Ipods docked continuously) is connected to an outlet. We were terribly embarrassed at a recent event when both Ipods went dead (battery-wise) in about 3-3-1/2 hrs. (with both fully charged prior to the event, of course). There must be a way to keep this from happening again and I'm desperate to find out how before the next event. Any help would be greatly appreciated!!

Hello Efing,
Thanks for the post. I've included a link below that has some great information on "self-repair". IF you cannot locate the needed information here, I might suggest posting this question on the links below the first. Also, another link for the HP Parts store, where you can purchase the needed parts if available. I hope this helps, good luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/CsrPartsEligibleDocument.jsp?contentGroup=BSC_SYSTE...
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=77BFC7C9E77A43CC9CDF6F3A3E68D587
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

Ok. so I updated to iOS 5. Downloaded it from iTunes and all. But in the middle of installing the iOS, i fell asleep. not knowing my computer was at a low battery charge my computer shut down. I did a DFU already but i'm not sure if it the os is complete.

Ok. so I updated to iOS 5. Downloaded it from iTunes and all. But in the middle of installing the iOS, i fell asleep. not knowing my computer was at a low battery charge my computer shut down. I did a DFU already and it worked but i'm not sure if it the os is complete. Is It??

Restore to factory settings. That will use the latest iOS and then restore from a backup.
Never, never, never attempt an update/upgrade on any portable computer device without plugging it into its AC charger.

My question is which better to use every time my iPad until the battery is 0% then charge it to 100% then use it again until it is 0% or i use it until the percentage is low then charge it until it is 70 - 80 % then use it but not let it charge to 100%

My question is which better to use every time my iPad until the battery is 0% then charge it to 100% then use it again until it is 0% or i use it until the percentage is low then charge it until it is 70 - 80 % percentage then use it but not let it charge until it is 100% to reduce the number of circles and increase the life of battery as i read that it must at least one time a month use the device until the battery drain to 0% then charge it again to 100% but i don't understand is it must be one, two, three times a month or properly most of the times to reduce the the number of circles and increase the life of the battery?

wuzradioman,
I was originally on your side in the discussion of batteries, however, after being contradicted by Meg St._Clair and others I took a leap of faith and took their advice with my Apple devices. Much to my chagrin their advice has proven true.
Long story short I have not noticed any differences in my battery life by changing my charging habits to what is convienant over what is more in line with conventional battery myths.

How to reduce storage for iCloud and lower monthly charges?

How to reduce iCloud storage plan and lower monthly charges?

The following may help: Manage your iCloud storage - Apple Support

Getting low voltage from the Macbook Pro Case

I'm getting low voltage throughout the casing whenever the brick is plugged in my 2011 macbook pro 13". I can run my fingers across the case and get the 60hz hum from the ac current. Pretty neat effect, not sure if it's totally safe or not. I tried plugging it into several outlets and changed the surge protector, with no changes happening. Anyone else getting this issue? Thank you for listening!!!
Jason

I have exactly the same problem. How did you fix it?
Is it magsafe adapter issue?

My iphone was powered off due to low battery charged it after few hours it took 30 min to show apple logo but i noticed that my phone was charging slow and draining fast, after this updated it to 8.1.2

my iphone was powered off due to low battery charged it after few hours it took 30 min to show apple logo but i noticed that my phone was charging slow and draining fast, after this updated it to 8.1.2 same problem & rest to factory still same problem (plz help)

Hello abdullahfromvenus,
Welcome to the Apple Support Communities! I see that you are experiencing issues charging your iPhone 5. I can understand how frustrating that may be. The following resource provides a few troubleshooting steps that may help to isolate and troubleshoot this issue:
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203030
Cheers,
Matt M.

HT4060 Should iPad be allowed to run very low before charging or is it best to keep it highly charged?

Should iPad be allowed to constantly run low before charging or is it best to keep it highly charged at most times?

Battery care
1. Make sure you run the battery down to 5% and then charging it to 100% once a month.
2. You should start charging your iPad when the battery charge is less than 10%. Over discharging the battery will shorten the lifespan of its battery.
3. Never store the battery fully discharged. Apply some charge before storage, and then charge fully before use.
4. When possible avoid frequent full discharges. Instead, charge the battery more often. There is no concern of battery's memory when applying unscheduled charges.
5. Avoid iPad from overheating > 35°.
6. Remove casing/sleeve when charging to allow heat to dissipate from back cover
7. To safe battery power turn off :
a. background app refreshing
b. push notifications and/or push mail
c. lower screen brightness
d. minimize the use of location services
e. increase Fetch New Data interval.

Portege R930: DDR3-1600 SDRAM Low voltage (1,35) or standard voltage 1,5

Hi again,
Just wanted to know if the two sorts of DDR3-1600 SDRAM RAMs (one is called low voltage memory) that are available on the market are compatible with my Portege R930 i7 Toshiba?
Thanks!!
Regards
/Anders

Just as additional info: for RAM upgrade you can use follow compatible RAM modules
4GB DDR3-1600 - PA5037U-1M4G
8GB DDR3-1600 - PA5037U-1M8G

Low Voltage FB-DIMMs

A question for Apple:
Is the new 2008 Mac Pro compatible with low voltage (1.5V rather than 1.8V) FB-DIMMs?
For example, these: http://www.acmemicro.com/estore/merchant.ihtml?pid=5236&step=4
(I do realize that an Apple approved heatsink would have to be added).

Why take a chance? they don't mention ECC. There are other places with good prices.

Low Voltage

We have 2 Apple XServes and one of them is reporting Low Voltage on the CPU 1 Vcore at 1.21 volts. The second Vcore is reporting normal at 1.27 volts. The other XServe is reporting a normal voltage of 1.27volts on both Vcores.
Is this anything to worry about and what exactly is going? Any help or thoughts would be very much appreciated!
thanks in advance,
Bill

The word from Apple on this is that the voltage core thresholds are somehow hardcoded into the CPU itself. If you compare one box to another, the thresholds can be different.
While your number may not be out of spec for the G5 processor, it is possible to be out of spec for the thresholds preset in the processor. (Extremely annoying, no?)
My experience with this required that we swap out processors to fix the problem. Little else we tried would fix it, as there is no way to change the thresholds that System Monitor sees.

Low Voltage at "CPU 1 Core"

Our Apple Xserve is reporting (warning) Low Voltage on the CPU 1 Vcore at 1.21 volts. The second Vcore is reporting normal at 1.27 volts. The amusing is the warning is going out by e-mail when Retrospect is making an backup.
Is this anything to worry about and what exactly is going?
Please Help!
Thanks to you
atze

atze
Do you do anything else that uses both processors? I am just curious as to why only with Retrospect.
Yes, a low voltage warning is something to take seriously. Most likely your CPU, MB or power supply are about to take a dive.
Luck-
-DaddyPaycheck

Low Voltage Power Supply

How do I replace a low voltage power supply for a laserjet 4700?

Hello Efing,
Thanks for the post. I've included a link below that has some great information on "self-repair". IF you cannot locate the needed information here, I might suggest posting this question on the links below the first. Also, another link for the HP Parts store, where you can purchase the needed parts if available. I hope this helps, good luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/CsrPartsEligibleDocument.jsp?contentGroup=BSC_SYSTE...
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=77BFC7C9E77A43CC9CDF6F3A3E68D587
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Charging downloads

I have a question about Charging downloads,
Charging downloads = Folio Downloads + Download Errors + Canceled Downloads
or
Charging downloads = Folio Downloads
shimoawazu

in my opinion, I would strongly recommend that you change your password and perhaps even make a new apple id. I think you can also change the bank account info so i would recommend you change all of that information.
Good Luck!

PWM-520 low voltage problems

Hi all. I am having a problem with an FP-PWM-520 module and I'm hoping that someone can help.
I have a Fieldpoint system with two FP-PWM-520 modules in positions @7 and @8. The two modules are powered by a dedicated 24V supply. One module works properly but the second module does not output enough voltage to run our equipment (~4-6V per channel at 100% instead of ~24V).
I measured and got 23.96VDC across V and C. I tried swapping the modules to see if it was a problem with the terminals but the problem moved with the module.
Is there a configuration setting that i missed or is the module toast?
Thanks,
Dave

Hi Janell. Thanks for the reply. Here are the clarifications you are looking for.
1. The power supply is connected to the V and C terminals at postion @7 in the Fieldpoint train. The V and C terminals at position @7 are then jumpered to the V and C terminals at position @8. As originally connected, the two PWM modules share the same power supply. This power supply is used exclusively for the two PWM modules.
When I say that I swapped modules it means that I took the two modules and switched their position in the train (ie: the module that was at position @7 was moved to position @8 and the reverse was done with the other module). When I swapped the modules, the low voltage outputs followed the module that I suspect has a problem.
2. I did try isolating the supply to each module. The result was that one module worked properly and the other still put out the low voltages.
3. I will try this in the morning. Is it possible that the PWM modules are interfering with each other?
Thanks,
Dave

Low Voltage and Audio (AC97) Lost in Game

Hi, someone please help me. i have search the forum with no luck.
i have installed the monitoring software provided with the msi cd and during gameplay, the alarm goes off in win98 (i don't play game in xp). the voltage (most of it) falls below the normal level. the 3.3v fall to around 2.8v. sometimes, the pc just went off without warning. is it the psu problem? how to check? is it harmful if i keep using my pc ignoring the alarm? are there any other reason for the voltage to drop other than faulty psu? fyi, i have 350w psu with 2 hdd, 1 cdrw, 1 fdd, 1 agp, 1 pci, 1 thumb drive in use and 1 casing fan.
another problem, my audio come and go in most game. it all started after i install directx9. i try directx9b but the problem still there. my sound driver is up to date (v3.59). i think it has nothing to do with psu problem bcoz this problem exist long b4 the low voltage problem. last time, i reinstall everything and use only directx8.1 to solve this. i don want to do this now. i found similar problem in this forum but there are no conclusion. anyone know how to solve this? or maybe i can downgrade directx9 to diretx8.1?
Thanks, in advance.

12V/18A. it is cheap, so it might not be the best psu. i play all kind of games in 98. just don't want to mess up with game in xp. when it happen like my sound problem, i reinstalled everything. if i use xp to play games, there would a lot to do.
i had installed mbm 5 and here is the lowest/highest voltage recorded. 2.66/2.96 4.81/4.87 11.19/11.55.
Anyway, the sound problem seem ok after i change something in bios. something in ram timing. i set from auto to manual without knowing the function. what dhould i set for the best setting for this timing?

Low Voltage Charge "download"??

Similar Messages

Maybe you are looking for