Low volume issues

I have recently noticed that nearly all the music I downl from the iTunes store has an annoyingly low volume. The final straw was when I download tracks from the new Foo Fighters album and I could barely hear them. This is not an issue with my hearing as there are plenty of other song that I have either ripped from CDs or got from Amazon that have normal volume levels. It's as if Apple are anticipating law suits so are lowering the volume. I did ask for support but all I was told was to try downloading the songs again which didn't help. Can anyone suggest something or do I have to stop buying stuff from iTunes and going back to bu

Hi
Ducking is off.
I had a couple of hours to research this today and I'm looking in this direction when I get time later this week.
http://www.thegaragedoor.com/edit/master.html
Thanks,

Similar Messages

  • Has Anyone sent the iphone in for repair for the low volume issue ???

    I called apple last week and spoke with a level on support agent. After he could not solve the volume issue they sent me to level two. the level two tech took the call and told me right away that they were going to send me a new phone. I give him my credit card as a deposit so they would send a new phone and when I had the new phone I could then send the old one back. Well after a few days I called to check on the phone and found out he never placed the order and now they say they want to send it for repair some place in Texas. They did offer the rent me a phone for 29.00 while I wait for repair. I told them no rental for me. How bad is that, a hardware issue and they say they are going to send a new phone and never do then they offer a repair and to rent me a phone. I was wondering if anyone had sent in the phone for this issue yet. I do not think I am going to send it in and I think I am going to get my refund while I still can. I just thought I would check to see if anyone had sent the phone in for repair yet and how it worked out.
    Andrew

    How are any of us (Apple users just like you) supposed to have any idea?
    We weren't there.  We don't know the specifics of what happened to your iPhone.
    Ask the store that repaired it.

  • Low volume issue, no answers?

    Hi, I have an old AX, perhaps 2004, or 2003 that can only stream tunes at very low volume out of the minijack to rca output.  Consequently I have to turn the volume of my amp way up, and it is distorted, so is unlistenable.  It is also dangerous because if I change an input on the amp, I could blow my speakers.
    I see alot of talk with no fix on this from the 2007-2008 timeframe, but no answers.
    I have rebooted the unit, changed cables and no luck.
    I may have had this problem for some time, but as I was using the optical connection, I did not notice it.
    Could it be that the unit is just too old to be reliable? It seems to be working as far as the utility set up is concerned.
    Thanks for any help in advance!

    Forgot to mention that I have all the available volume options at max.

  • Volume Issues Palm 800

    Hello Palm users and tech(s) alike...  Well, I'm sure others can relate to low volume issue with their palm... Although I have my device turn up to the Max, I'm still having trouble hearing my phone conversations and watching TV on my device.  I have purchased many Bluetooth and headphones and still I'm unable to increase the volume output.   I'm aware of one particular patch for volume issues related to Bluetooth devices(incoming calls the volume goes down) however, does anyone know of a work around for increasing the volume output...  If so, reply back to [email protected]!
    Thanks,
    Reginald (Seattle, WA)
    Post relates to: Treo 800w (Sprint)

    Hello 800 users... I found a  Sony Ericson bluetooth headset (earbud style) for around $120 and it works GREAT!  I would recomend this stlye (earbud) for everyone!
    Reginald
    Post relates to: Treo 800w (Sprint)

  • FIX for low volume, sort of....

    I finally broke down and called tech support last night about the low volume issues I was having. The music and videos are all loud enough and when using the headset and/or headphones but calls, speakerphone and voice mail are all very low even when turned all the way up. To listen to the VMails I had to hold the bottom of the phone near my ear.
    When on the phone he told me to hold down the top button and the home key which I had done before but I always stopped when the slide to turn off appeared. He said to hold both down until the "apple logo" appeared. I did this twice.
    I did this and my volume increased by about 10-15% for the calls, speaker phone and VMail increased about 25% same for the music and videos. I can now hear the Vmails comfortably holding the iPhone about 2' in front of me no more holding it to my ear. The music and videos are now so loud that I dont have to turn it up past about half way.
    The volume for calls could still be a little louder as I still have it maxed out but that to is much better than before.
    He also asked if I used a case and I said yes but it didnt block the speaker. He asked me to remove the case as the entire bottom piece of the iPhone is thinner and a different material and allows sound through "in a way". I thought he was crazy but I removed my case and viola another nice volume increase for the VM, speakerphone, music and videos.

    Thanks, pool_shark and Tidbits.  I guess I'll have to wait for the 4.03 update.  I keep my volume at maximum.  I had a Plantronics bluetooth when I got the phone, have since purchased a Jawbone, a newer Plantronics, and a Blue Ant.  Have returned the first two and will return the Blue Ant if I don't get the update before the return period is over.  This is really frustrating, but at least it's good to know Google is working on a fix.

  • M-Audio Profire/AKG mic... LOW volume! Power issues?

    Hey guys, desperately need some help here. So I've got an M-Audio Profire 610 interface, using an AKG Perception 200 condenser mic. I am having issues with REALLY LOW VOLUME! And I'm pretty positive I have everything setup correctly. XLR to XLR mic cable(I threw out my old one and bought a brand new one, still didn't solve the problem). I've got phantom power on and the profire is connected via firewire 400. All drivers and software are up-to-date. Got the latest OSX, running all of this on a relatively new imac.
    I have no idea why the AKG mic won't pick up sounds nearly as loud as it should. I have the gain up on the Profire up at 90% which is sufficient enough but the recordings are muffly and not as crisp as they used to be. Once upon a time I used this same mic with a Powerbook G4 and M-Audio Mobile Pre, and the mic worked AMAZINGLY in both Garageband and Logic Express, it picked up EVERYTHING and I never needed to put the gain on the Mobile Pre past 40%--it was a super sensitive mic. One day out of nowhere, however, the gain volume became ridiculously low and I had to max everything out on the Mobile Pre and Garageband/Logic, but it sounded like crap. No hiss and not too much distortion, just LOW volume. The mic was hardly used and I'm having a hard time believing the mic is the problem, just because I only used it a handful of times before the gain crapped out on me. The strong sensitivity came on and off a couple times after that, but the volume is now low all the time. The only other mic I've tried to use with the Profire is an SM57. It works, but really low gain. Guitars and keys have worked perfectly fine, no gain problems.
    I thought the original problem back in the day was my Mobile Pre, so I bought the Profire. Now I'm still having the same problem with ultra low volume. My mic used to pick up sounds from another room or even cars driving outside my window, and now I have to sing RIGHT into it for anything to even be audible. What the **** happened to my crisp/loud sounds? Is it possible that I'm not getting enough power? Would running the Profire via firewire 800 help at all? I'm going crazy here, I have no idea why my mic totally blows now. I guess at this point it seems like the mic could be the problem, but I'm scared of buying a new condenser mic and having the SAME problem all over again.
    What do you guys think? Power problems, the mic itself, wrong setup? All I want to do is pin point this thing, any help at all would seriously be appreciated!
    Message was edited by: misspibbs

    misspibbs wrote:
    What do you guys think? Power problems, the mic itself, wrong setup? All I want to do is pin point this thing, any help at all would seriously be appreciated!
    Since you've already swapped cables, I would guess it's either the mic or the interface. Since you've already swapped interfaces, logically I would guess it's the mic.
    Can you bring the mic to a music store or some other place where you could plug it into another interface or mixing board and see if it also doesn't work there? That would clinch it.

  • Xperia Z1 mic issue (low volume) when using WeChat

    Was searching this forum for a solution, but to no avail. Using Wechat on Xperia Z1 with Android 5 is impossible because mic records at very low volume and other parties strugle to hear me. Microphone suppresion and voice enhancement are turned off, equalizer set to normal. PC companion shows most current version of software. Dear users and/or Sony, could you suggest for any solution?

    Please consider this before buying Sony Xperia phones: Chat TranscriptPlease wait while we find an agent to assist you...You have now been connected to an agent.Emir:  Hi Client Name! Welcome to Sony Xperia Support, my name is Emir. 
    I'm currently reading your message. In the meantime, I would appreciate if you kindly could leave your first and last name, your e-mail address and mobile phone number.Client Name:  Client Name, [email protected], +37067530xxxEmir:  How may I help you?Client Name:  Hello, I have posted a topic about an software issue in Xperia Z1: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Xperia-Z1-mic-issue-low-volume-when-using-WeChat/m-p/1020748/highlight/true#M44196Client Name:  it was ignored by staff, so I posted another topic about how Sony ignores issues of flagship phone ownerClient Name:  this topic was moved out of forum to this topic to be burriedClient Name:  can I speak with someone in charge?Emir:  No, there's no such contact I can refer you to,.Emir:  I'm sorry to hear that your thread has not been replied to.Client Name:  What do you mean? You're independant worker not accountable to anyone?Client Name:  its been replied with default answer that all posters with similar problem receivedEmir:  I'm a technical support agent for the chat, I don't have any information about the Forum team.Client Name:  we are specifically ignored until Z1 goes broke and out of your problemsClient Name:  I need someone in charge from your department who could personally overlook this issue that many users haveClient Name:  its not just me, mic problems are apparent for many usersEmir:  This issue concerns a third party app, and you have already been in contact with me regarding this issue. We can't guarantee that third party apps are compatible with your device since we do not develop them. I recommend that you contac the app developer for more information.Client Name:  I dont understand why phone hacker can solve this software issue by themselves, but Sony engineers choose to ignore usClient Name:  no, this issue also goes to many other apps, including native app TrackIDClient Name:  its the problem in new Android releaseEmir:  You may try a software repair to see if the issue persists in TrackID like the agent on the forum suggested - if the problem persists and you suspect there's something wrong with your device you may have it sent in to an authorized service center so that a technician may examine it.,Client Name:  These steps were performed by other users with no luckClient Name:  I wont repeat this to come to the sameClient Name:  I ask engineers to look into solution developed by XDA team and implement for us normal usersEmir:  Those are the troubleshooting steps I can refer you to in this case.Client Name:  They dont work, please find another solution or ask for person who can do it, if you cantEmir:  I have already provided troubleshooting steps, you may try that. If a software repair does not help then I can only refer to service.Client Name:  I already told that these steps didnt work for other users, who have same problem. So you admit that you wont help your client?Emir:  I can't suggest a possible solution other than what I've already suggested unfortunately.Client Name:  So I have no choice, but to share our chat in all possible internet sources for other existing or would be Sony users to consider how they will be treated upon problems arise.Client Name:  Thank you for your support, I hope you will be promoted for high quality service

  • Really need some help with this low earpiece volume issue.

    I'm taking my iPhone to an Apple Store Genius tomorrow to check out the low volume in the earpiece. Has anyone else taken their phone in to an Apple Store and had the issue addressed? Are Geniuses just saying it is within spec? Has Apple published an article on this?
    I realize that people are also frustrated over the low speakerphone volume, but the low volume in the earpiece is particularly concerning.
    While traveling down the road it is very difficult to hear the person on the other end of the phone when using just the earpiece (no earbuds, no BT headset). The volume while using the earbuds is plenty loud.
    Can anyone please shed some new light on this? I have had my iPhone for one week and I've got a bad feeling in my gut that this is a hardware issue and the earpiece speaker can't go any louder. Bummer.
    (Obviously, all of my volume settings are maxed out).
    -Joe

    When the iPhones were first released, some people reported on their posts that they were able to take them to the Genius Bar, have a tech test it out, the tech would agree that the volume sounded low, and get their phone swapped right away. Unfortunately, there is no cut and dry answer because people have reported all sorts of different things- that the various software updates have fixed their volume, messing with the volume setting within iTunes, etc.
    Personally, I think it is a software glitch. Why? I did this: I was playing the iPod without the earbuds and the volume was only set midrange. I covered the speaker on the bottom, cranked up the volume, and the sound coming out of the receiver was MUCH louder than it ever is when I am using the iPhone on a call. That to me indicates that the low volume it just a glitch that can be fixed, because it CAN obviously sound louder, just within a different function. Hope that makes sense.
    Good luck tomorrow.

  • Low volume, no enhancements tab to fix issue

    Hello 
    I have a Pavilion g6 HP laptop, running on windows 8. 
    I am experiencing a problem with very low volume. How can I fix this? I have seen in previous questions that this response has worked for people:
    Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    However, there is no enhancements tab on my system! Help!
    Thanks

    Same problem here.. This problem is from years with the hp laptop speakers and they do nothing... That is very irresponsible.. Well, HP you're gonna release some official fix for that or what? Seriously I'm going to switch to dell because of your useless support.By the way why are you doing a support forum when you DO NOT KNOW the answer of the problems? Huh... 

  • Guitar audio drop-out at lower volumes

    I have tried out mainstage on a friends macbook pro, to check if it will be worth an investment into Logic over Garageband, mainly as an effects emulator for my guitar so I don't need to worry about amps in my small flat.   I connected through an Edirol UA-5 USB audio interface and while there were some issues with this interface anyway due to the fact I could only use input-1 rather than the Hi-Z Input-2 that I should use, I wanted to check some audio problems I had and see how to fix them.
    Basically, at full volume on my guitar it seems to work fine, but as soon as I turn the guitar volume knob down there is literally no sustain anymore, I can hear a brief note and then it just cuts out, no gradual loss just stops.   If I only plug the interface in without mainstage then the monitor channel gives me the full volume control I expect and I tried my guitar on a proper external amp and it seemes to be fine so i've eliminated my guitar as the problem.
    Anyone experienced this or have any suggestions to try to get it to work.
    Also, if I use garage band I don't hear the output fromt he amp/effects simulators, only raw guitar and I only hear the final version if I record it and then play it back.  Is there a way to get Garage band to act as a amp/fx simulator in a live mode like mainstage does or is the fact mainstage is playing back through the interface what might be causing the problems in some feedback loop??   Beginning to think an iRig would have been a better option......

    CCTM wrote:
    Djbungo wrote:
    Basically, at full volume on my guitar it seems to work fine, but as soon as I turn the guitar volume knob down there is literally no sustain anymore, I can hear a brief note and then it just cuts out, no gradual loss just stops. 
    Hi
    Sounds like you may have a Noise Gate in there somewhere?
    CCT
    yeah I thought of that but couldn't see anything, and think my knowledge of what a noise gate would do is slightly rusty since I assumed that at louder volumes it would clip and at lower volumes it would be fine....i'll have a play next time I am over my friends and see if I can spot anything.
    Thanks for the quick reply.
    MKS

  • Low volume warning

    My son is currently having a problem connecting to itunes. When he brings up itunes he gets a low volume warning popup stating that itunes volume has been turned down low, howereve he cannot click past this warning box nor x out of it. He has not been able to use his ipod for the past two months and we aregetting very frustrated. i have tried to uninstall itunes and quick player and then reinstall but nothing has helped. Other than this new issue he has been using it successfully for two years. Please someone help!!!!!!

    Why can't he dismiss the dialog box? Can he see the button on screen? Is it a screen resolution issue?

  • No sound vs low volume

    I recently experienced the loss of all sound on my phone. It began after I unplugged the ear phones. I could not hear it ring and I could not hear anyone on the line although they could hear me. It was basically dead for about 4 hours or until I plugged the ear phones back in causing something to reset or whatever. It works fine now and Apple asked that I call when it occurs again so that we can try and trouble shoot and narrow the problem. I may have a defective phone.
    I do not think this has any correlation with the "low volume" problem that everyone is talking about. I will agree with another writer that the volume is low until you activate the speaker but I have been using the speaker/hands free since the first day so perhaps that is why I have never experienced low volume. I think if the speaker is activated everyone will experience normal sound volume.
    Dell   Windows Vista  
    Dell   Windows Vista  

    Faddy wrote:
    I installed the Audigy 2 ZS last night. Updated everything, all of the drivers. I plug in my speakers, and nothing at low volume. I turn on music, and theres nothing. If I turn the volume all the way up, theres distortion, white noise, and a bunch of static, but I can hear the music very faintly. I've disabled the onboard audio, and followed the FAQ, but nothing. Any ideas?
    Output volume is set with "Wave" and "Master" controls. Max the Wave and control with Master.
    In many cases if PSU is weak --> you get issues of this type. Try to remove (temporarily) devices like CD/DVD, floppy, etc. (just remove power/data cables) to see if PSU is the culprit for your issue.
    Also, have you checked/tried
    - audio HW acceleration and SR conversion quality --> set both max
    - audio codecs --> reinstallation can be helpful
    - muted all other sources but the one(s) you're using (i.e. all other sources can be muted if only playing audio files)
    - digital output only set properly (speaker settings/THX console)
    - speakers connected as should (2/2. --> green jack, etc.) and plugs properly pushed in
    - speakers set correct (2/2., 4/4., 5., 6/6., 7.)
    - used different output device drivers on audio players (DS/MME/WDM/...)
    - ASIO capable player --> shows if you have sound driver issue (creative/windows)
    - reinstalled directX, WMP (updates audio codecs)
    - etc.
    jutapaMessage Edited by jutapa on 03-09-200609:34 AM

  • Computer freezes, then a low-volume, high pitch sound

    Hello there,
    My trusty 2002 MDD is randomly freezing on me for the 1st time! Disk Warrior nor Disk Utility form external boot-ups detect anything wrong. Thus, it doesn't seem to be a hard drive issue. Memory status on System Profiler checks OK.
    Once the beach ball appears I can't do anything but press the power button to shut it down. I've noticed that while frozen a very low-volume, high pitch sound can be heard. ???
    Thanks a lot for any feedback that you may provide,
    Jacobo

    Hatter,
    Thanks for the prompt reply. Like you proposed, I've started from my FW drive (not after a freeze though) and everything drive-related checks OK.
    Yes, my video card (Radeon 9800) does have a fan. I've though about this and the PSU as well. The latter is the quieter, less powerful one.
    My drives are less than a year old and seem to be OK.
    I’ve run Applejack (w/ memory check) and all is good.
    Can the Apple Diagnostic CD pinpoint any of these issues?
    My MDD has been incredible when it comes to reliability. She has not given me ANY problems whatsoever while stressed to its limits.
    Thanks again for your time,
    Jacobo

  • Fix low volume output on Sky HD Boxes

    Here a suggestion for you. Why dont you fix the low volume out on the Sky HD boxes? Loads of people have complained about it. Do something about it.

    I have finally found a very cost effective solution to this problem.  Cancelled Sky subscription and got Freesat with a Humax box.  This does not have the fault that the Sky HD boxes have.  In fact it has an "on the remote" volume control, and when this is turned to max the volume is exactly as it should be.  The volume control works both the HDMI and the analogue outputs.  Additionally there is also a mute button on the remote, again muting both outputs.  Perfect.  Cost effective because since I have been a Sky subscriber for over a decade, now cancelled, assuming I would have stayed with them for another decade I have saved myself £4121 including the initial cost of the Freesat box.  Quite a shocking amount of money that I will be saving, having calculated it.  Shame on Sky for not correcting this software issue when it was first reported by many users, especially as the volume function used to be there and they removed it.  For those thinking of doing the same as me, the Freesat / Freetime system is excellent, the EPG is as good as Sky and the "roll back" TV aspect of the EPG far superior to that of Sky.  Picture quality is at least as good (probably better as box is Full HD)  The BBC iplayer implementation is also not the "cut down" version thst Sky have also implemented (another software short cut that bugged me), i.e. it is the same as you'd see on your PC / smart TVs with FULL programme content.  What you don't get is Sky Atlantic but since I never watched this in over a decade made no difference to me.

  • Volume Issues - Too Loud & Too Soft

    This is a problem I've had for awhile now. It's getting unbearably frustrating. Volume issues, where the default value for sound ranges outside what the iPhone should be capable of doing. So for example if the volume goes from 0% to 100%, my phone will be completely random and range from -50% to 150%.
    How can it be less then 0% you might ask, when moving the slider mid way the volume is completely off and any lower doesn't make a difference, then I'll receive an email notification and BAM the volume goes up 300% and it's so loud it feels like the speaker is going to explode. This problem happens at any time but mostly after or while using headphones or car bluetooth.
    Example of my issue in action, I'll plug AUX in the car into the phone, play music, driving along, randomly goes to half volume. I'll turn up the stereo to compensate, one minute later I'll get an email and the volume resumes to normal operating volume and I almost sh** my pants in fright.
    Another example is I'll be watching a video late at night before bed on youtube or something with the volume all the way down, then the next morning my phone alarm will not sound or it will but insanely softly. The work around for this is to play music right before locking my phone with the volume up all the way. Just move the volume up all the way, play > pause and there you have it, volume working agian.
    And one last example, randomly it goes really really loud. Like how is this possible loud. I'll dial a number and when pressing the buttons instead of a beep beep beep. I get fog horn BEEEEEEP BEEEEP BEEEEP. But as soon as the call starts the volume sets itself back to normal. Kind of like how when playing music without head phones with volume on max sets it back to normal.
    Things you should note:
    Ringer volume has been locked to maximum, but quite often won't abide by this rule.
    I've reset the phone and setup as new iPhone, problem still occurs.
    Please don't give a solution like, "Have you checked your sound volume in settings". I'm not stupid.
    Also, please don't give a solution unless you understand the difference between "Notification and Tone Volume" and "Media Volume".
    Other then that. Please help, this is driving me mental.

    I recently did the last firmware upgrade for my ipod nano 5th gen and can't set the maximim limit.
    It can be set, but wont stick and I can still go above the limit.
    Did something break with the firmware upgrade.

Maybe you are looking for

  • Single/ Consolidated  GR/IR entry for a PO having multiple line items

    Hi, In a PO there are couple of line items for materials of similar type and class. While making the Goods Receipt, the Accounting Document is making two no of line items for GR/IR accounts as credit and two no of inventory accounts as debit. Same is

  • Using scroll wheel with modifier key to zoom out is not working

    I can't zoom out with the magnifying tool selected in all programs of the CS3 suite using the option key on a Mac. I can zoom in with no problem. I've been trying to figure this out for "8 hours" now!!! I do have this checked in the system preference

  • Capturing using a system-based setup vs. project-based setup

    Trying to build a library of my 50 DV tapes on an external 4T hard drive and I am supposing that I need a system-based setup instead of a project-based setup during capture.  Since my Adobe Premiere Pro SC6 Classroom in a Book tells me to check with

  • How i can change country in my Adobe ID?

    i need to change country in my adobe id, but i dont know how? help me please

  • IDOC generatuon in IS Retail

    Hi All, I am implementing IDOC/ EDI for IS Retail. How do i generate sample IDOC files (outbound processing) for the following idoc types? wp_plu02 wp_ean01 wpdwgr01 the pos system needs to be configured and they need an actual text file of these ido