Low volume level help

I imported video to my ipod and the volume is almost too low to hear ! I've been to settings and maxed out the volume but no improvment. I understand that there is and automatic upper level set but there is a workaround. Any help with sharing how to increrase violume ?
Thanks

I am talking about the volume limit button and is now set to maximum. However the one file I'm trying to work volume on did not improve. I'm wondering if there's way to improve or clean up volume when using Popcorn 3 ? Sometings scewy somewhere ? The other video file From the same source I'm working with seems to be fine with audio. Mac or electronic voodoo.
Thanks

Similar Messages

  • Lower volume level on Auxiliary that Airtunes is playing thru

    Anyone got any advice here? I have airtunes working on my Bose stereo from both computers in my house. When I play it, however, it is at a noticeably lower volume level than that of the CD or even FM radio. Volume on iTunes is at the max.
    Any help is much appreciated.
    Thanks
    Chris

    Which input are you using on the Bose stereo? You should be using a line level input (for example "Tape In"). A phonograph input expects a much different signal and won't work properly.

  • Low volume level on Audig

    a few days back i found out that may Audigy2z card is not working fine.
    i have low and distorted volume level on the analog output.
    i tried re-installing all the software using clean boot on my machine, but nothing seems to work.
    also ran a registry cleaner to remove all leftovers, just in case, nothing...
    here some additional info:
    WinXP pro, SP2
    Soyo MoBo, VIA266 Chip
    G RAM
    ATI Radeon Video
    Any help will be highly appreciated

    Hi
    First of all you should not compare the sound level of the speakers with other speakers built in multimedia notebook.
    As far as I know the notebook has been equipped with common stereo speaker as you can see here:
    http://www.mytoshiba.com.au/products/computers/satellite/c665/psc55a-013008/specifications#details
    This are not Harman Kardon speakers which are used in much expensive multimedia notebooks.
    At the other hand you should also check the sound settings in control panel -> sound
    You can click right on the playback tab to see if all sound level controls are set to the highest level.
    But listen: my notebooks internal speakers are also not really loud but I use external sound speakers from Logitech to get a nice sound while gaming.
    Would recommend using such external sound system.

  • How to identify low volume/level audio segments in a recording?

    Iam newbie to Audition and trying to edit/master a 2 hour long lecture done in a live setting (not studio). Since the speaker sometimes moves away from the microphone the level of the audio sometimes falls off or reduces sometimes for a few seconds to a few minutes. I would like to identify all segments greater than 5 seconds which fall below say -5db.
    I have tried using Diagnostics >>Effect : Mark Audio and set a Custom setting. I defined Silence has : Signal is below -5 dB, For more than 5000 ms (5 seconds) and Define Audio has Signal is above -15dB for more than 27 ms. It works to some extent in the sense it marks the Proper Audio segments in between the segments that are between the segments that are identified/marked as Silence but I would like the opposite. I would like to get the segments which are defined as Silence to be marked.
    I am sure it is possible to do in Audition, appreciate all your help in figuring out how to do it.
    To do the same in Audacity is very straightforward, Go to Analyze >> Silence Finder and define Treat audio below this level as silence : -5dB, Minimum duration of silence : 5 seconds. Thats it. That easy.
    Would appreciate help from all the masters in the forum. Thank you for your time in advance.
    VS

    Is what you are going to do when you have identified these sections to raise the volume. That can be done automatically without previously identifying them by using the Dynamic Processing or Speech Volume Leveling effects.

  • Low volume level on Viber

    Hi, does anybody have the same issue? The other side hears me very good, but volume of internal earpiece in my Z2 is incredibly low. At the same time usual call with the same set up is very good. 
    When I use Viber through speakers, the volume level is good. 

    kulvershtukas wrote:
    Hi, does anybody have the same issue? The other side hears me very good, but volume of internal earpiece in my Z2 is incredibly low. At the same time usual call with the same set up is very good. 
    When I use Viber through speakers, the volume level is good. 
     Same Problem, even dropped calls.

  • Low volume level

    Since updating my Q10 the volume is very low, even though I have it set on the highest level! It was fine before the latest update I did yesterday! Now I am missing calls and messages! Help! Thank you, Bee

    Hello There
    im having the same problem with the Alarm`s volume and messages volume
    please whenever you or anyone know how to solve it,plz email me
    {REMOVED}
    Thanks
    Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

  • Trouble with snoowball usb mic  in GB3....low volume levels or bad clipping

    I have rebooted the computer several times. This usb mic has no driver software and was working fine until I got a audio core driver message of some sort.
    Any pointers?

    dollarblower,
    If it's not the Snowball, then I'm not sure.
    You can give the following a try; I don't know if it will help you, but it won't hurt you, and it often solves weird issues in GB:
    Use Disk Utility to repair your system permissions (/Applications/Utilities);
    Then, trash your GarageBand Preference files (don't worry, it will replace them; you can reset any prefs to what they were in the app)
    Search for the two files:
    com.apple.garageband.cs -and-
    com.apple.garageband.plist
    and discard them.
    (Normally, they are in /Library/Preferences/ or in user/Library/Preferences/
    but do a search to make sure you get all the copies.)
    WH

  • Burned CD volume level too low

    I have noticed that CDs burned with GB are at a lower volume level than commercially recorded CDs. The GB master volume is as high as I dare go without constant peaking. Can this be adjusted some other way?

    http://www.bulletsandbones.com/GB/GBFAQ.html#commercialcdvolume

  • Very low volume in the speaker

    Dears
    i've notice of the very low volume level from the built in speaker of the earliest Mac Pro ( i've one ) compared to the previous one (2008...i've one). Is this normal ?
    Thanks in advance.

    I can tell you right now, that's a complete waste of time! They're just gonna tell you it's "in spec."
    It's a crumby speaker... deal with it. If you really care that much about the volume of the audio, you should just get a good pair of external speakers!

  • Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

    Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

    Hi saiyed adil, 
    Thank you for contributing to the Apple Support Communities. 
    It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it. 
    It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    All the best,
    Jeremy 

  • Is there any "mechanical" helper to get my volume levels the same?

    I create playlists from ratings,(and comments),- and albums have different volume levels. As I always use my ipod to go to sleep, it is very destructive, to not be able to hear my music one minute, and then have it much too loud the next.
    Is there ANYTHING, free or chargeable, physical or software, that can help me get my itunes library to all the same volume level. My problem is agrivated by the fact that I do have some shared downloads, and also someone put my vynils onto cd for me, but at a lower volume.
    I might add, that I'm still a learner on the computer. I have been told to change the soundcheck -playback -preferences -itunes. I have tried it, ticked and unticked - it doesn't make any difference.
    I'd be very gratefull for some advice. Please HELP, this has been going on for ages. Thank you, in anticipation.

    I'm SO very grateful for your help! Have downloaded it, and have started to use it, but havn't listened to results yet.(just about to) THANKYOU SO MUCH.
    Thankyou so much again, this could be the end of a long (negative) era!
    A bit later: have listened to a little, seems a huge amount better. will update when used properley.
    I'm anticipating some being way out. Though it says it can overcome old changed volume levels, is it best in your opinion, to put them back to original setting?
    Many Best Wishes Vonnie

  • My 10G iPod-Volume Levels Erratic + Freezing...HELP!

    Admittedly, I have a 3 year old 10G iPod. But I'd prefer to getting it working well if I can instead of junking it for a new model. We've been through a lot together...ha ha
    The problem with mine is that the volume levels jump in-between songs pretty often. I will be listening to it on the bus and then suddenly a new song will start at a mind-numbingly LOUD level, even though I have not touched the pad. At first I attributed it to how albums are randomly mastered at different volume levels, but I generally make a point to equalize them before loading onto the iPod. I also have the sound check function clicked ON.
    Anyone heard of this problem? any suggestions?
    It will also freeze playing occasionally, even though the song timer continues to play out. I'd say this happens every 20 songs or so. What's that about?
    Should I try to revert back to factory settings? Or should I just throw in the towel?

    Hi, i bought my Ipod touch 8g last week, now, when i play my music ( without earphones ) the volume is very low even though it is on full, in fact its pretty useless, it was much louder, has anyone got any ideas please? Thanks.
    Maureen.

  • VOLUME LEVEL TOO LOW

    Is there any way to increase the volume level beyond that normally available. Some movie tracks need a much higher level.

    It is not illegal. Apple has limited the sound level of their ipods over the past few years over complaints that they could be turned up so loud that people were damaging there hearing and so they took measures for the public safety to limit the volume. Personally I feel that if your stupid enough to turn it up full blast (old ipods unrestricted volume) for such periods of time that you damage your hearing that your just stupid.
    Apart from adjusting volume in itunes the only other thing you can do is do the following on your ipod.
    Go to Settings>Music>Volume Limit Check whether this has been turned down at all if not turn it up all the way. Maybe this will help.
    Dib.

  • Volume level on line-in at 100% but still low sound level when I rec

    For many years and hundreds of times I have successfully recorded wave files using a wave editor (Goldwave). I have transferred albums, tapes, and now satellite radio by running stereo cables from my receiver into my line-in on my sound card (using a stereo-to-mono adapter). The volume level on the line-in was always too loud on my old sound card, so I always turned the volume of the line-in down to about 20% and it worked just fine.
    Two weeks ago my old sound card fried (don't know the brand - got it from a friend, and I've already thrown it out). I replaced it with a Sound Blaster Li've! 24-Bit. However, using the same configuration (receiver into line-in on card), when I record now the volume level that it records at is way too low. Even when I set the line-in level at 00% the volume that it records at is not even half the level it was with my old sound card set at 20%. Basically, when I record now at 00% on the line-in, the volume level it records at is too low. I have no problem with the line-out level - when I play mp3's or anything else on my hard dri've the volume is crisp, clear, and plenty loud at 40%.
    But what is the deal with the low volume recording level? Is there another setting I need to change? Or do I not have the right sound card to do this with? Please let me know if it is a setting issue, or if I just need a different sound card to do this. Thanks.

    I've had an Audigy2-nx for a week and have struggled with low
    recording levels as well.
    Have you tried selecting "what you hear" instead of "Line-In"?
    This gives me about 20% higher input levels.
    I gave up on MedeaSource for variable bitrate recordings and
    moved to dbPowerAmp. (direct recording to lame-mp3)
    Others here mention good VBR recordings with MedeaSource, but
    it won't exceed 90kbs (average) on my system.
    I'm finally getting decent recordings from line-in.

  • Lower volume button control not working help?

    Lower volume button control not working help?

    If you only restored from backup, restore to factory defaults/new iPod.  If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for