Low Volume with Intel HDA ALC889

Hi,
I have a Intel board with Intel HDA ALC889 and I get sound out of it without problems. To get a half-decent volume, I have to set all volume controls (i.e. Master, PCM, Front) to 100 %, but sometimes it is still too quiet. Additionally, when I increase Mic Boost for Skype, all that gets louder is the background noise.
Sorry for the German locale, but here is the output of aplay -l:
$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC889 Analog [ALC889 Analog]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
uname -a:
$ uname -a
Linux odyssey 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 x86_64 Intel(R) Xeon(R) CPU E5504 @ 2.00GHz GenuineIntel GNU/Linux
Is there any solution to get a better volume?
Thanks in advance.
Kind regards
Thomas

No one with a clue?
Well, I already tried to set
options snd-hda-intel model=intel-x58
according to http://www.kernel.org/doc/Documentation … Models.txt as I'd say my board is nearest to a X58 board. But that didn't change anything.
Can it be a hardware "problem" or something else? Until now, I'm unwilling to spend money on an additional sound card if there is a solution...
Thomas

Similar Messages

[Solved] No audio with Intel HDA

I can't seem to get audio on my fresh (first) install of Arch. I had sound when I had ubuntu/trisquel installed, but when I switched to archlinux I can't seem to figure how to get it to work.
I have already unmuted my speakers/etc. in alsamixer. I can hear my system beep/makerandomnoises when I, for example, try to hit tab/autofill and nothing is there to fill in terminal; or when I try to backspace and there is nothing left to delete and it results in a beep (not sure if that matters).
The sound cards that alsamedia shows are; Intel HDA PCH, and Intel HDA HDMI.
lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5)
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5)
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5)
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM86 Express LPC Controller [8086:8c49] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
03:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01)
04:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
Last edited by TheKC (2014-03-15 12:02:19)

Yes, I was using alsamixer to unmute.
Besides unmute, I haven't done much. I don't know where asound.conf is located.
aplay -L:
ull
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
sysdefault:CARD=PCH
HDA Intel PCH, VT1802 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

Low volume with X-FI XtremeMu

I ordered the Vista CD from Creative, installed it, and the automatic updates were applied, well, automatically. Sadly, the volume of my X-FI XtremeMusic is very low compared to what I'd get on XP. I've reviewed the messages here, but I can't find the answer. Is there one?

Yup, same issue with the x-fi platinum, I have been using the youpax release to solve this issue. This would be an excellant find if it works for all the X-fi family, thats the only issue I have left to solve with this card.. let you know in a bit. Also, installed the latest patches for Vista tonight, didnt help the volume, but it MAY have helped with some of the odd choppiness, hard to tell .... Thanx for the info guys..The very next day ......
Yup, it works, and it works great, solved a lot of level/volume issues. Great find. And it works on many cl cards
Message Edited by scorpion_saga on 08-3-200708:43 AM

Low volume with kensington fm transmitter

Hi
Purchased a k33185 it is connected to new ipod 30g with video.
The volume is real low you have to turn car radio all the way up to hear the ipod. the volume of the ipod is at 100 percent. if listing to radio or CD player my normal volume level on the radio is about 1/3 on the dial.
To get the same level with the fm transmitter I have to turn the radio all the way up
To get the same normal volume .
Any suggestions
ipod with video Windows XP Pro
Windows XP Pro

thanks

Insanely low volume with via8233 onboard sound

Even with all volumes on alsamixer set to maximum, my via8233 onboard sound puts out about half what it ought to. Through my headphones, it sounds as though it's ten feet away... I can't seem to find anything on this problem anywhere on line, and I don't have a good preamp handy - only the piss-poor, buzzy black speakers that came with my last computer. Can anyone give me some advice?

It is inaudible, can hardly hear sound. I did try that options line and still nothing. I shouldn't have to use another sound card since it did work once and it does work with all my other distros. But getting another card is an option.
Thnx.
Gullible Jones wrote:
Well... How low, exactly, is your volume? Is it just lower than it ought to be, or is inaudible? Because if it's inaudible, then try:
options snd-via82xx ac97_quirk=0
If your volume is just a lot lower than it should be, use a preamp, or just stick in another card.

IPhone 5s iOS 8.2. low volume with video turned of...

Hello,
Today I stumbled across a curious bug on my iPhone 5s with the most recent iOS version. When I make a video call and either one of the users (or both) has the video on, sounds works fine for me. When both users turn off their video during the call (or if the call is made without video at all), the volume suddenly drops down on my end. If video is turned back on again, volume is good again. In other words - during a no video call I almost can't hear the other user from my iphone, but he/she can hear me all the time.
It's no coincidence, tried it a couple of times.
Does anyone know how to fix that?

I have the same issue and it has to do with iOS 8.2
Apple, please mend this ASAP. Really stupid change since iOS 8.1
If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

Low volume with eu firmware

for the people those dont know the situation, i have to summarize. European Union ask for a volume cap for ipods. So apple does different firmwares for usa and eu. that causes volume decrease.. Assume that ipods in usa can give 100 desibels, but ipods in european union can only give 60 desibels..
this *****..
so i need us update for my update. do anyone in usa can post their update file here, or can give me an url to download? your file is in you c:\documents and settings\user name\application data\apple computer\itunes\ipod software updates.

Hi,
let me make a small correction:
there are no different firmwares!
The regional code is hardcoded in the ipod itself.
Restoring with an "US"-Firmware would not change anything.
The other way round:
i have a US-Ipod and had it updated with the newest "European" Firmware.
There is no change in volume.

No sound with snd-hda-intel (Realtek ALC260)

Hello,
I've been trying to make my sound work with no success, i'm basically in the same case as this topic : https://bbs.archlinux.org/viewtopic.php?id=17347 but hints are references to now dead links.
I've played with modprobe and different settings like :
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=generic
with no success.
Here some more infos on my system :
[caribou@arch ~]$ lsmod|grep snd
snd_hda_codec_realtek 62023 1
snd_hda_codec_generic 57972 3 snd_hda_codec_realtek
snd_hda_intel 25959 4
snd_hda_controller 26327 1 snd_hda_intel
snd_hda_codec 93753 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 12906 1 snd_hda_codec
snd_pcm 73796 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 22010 1 snd_pcm
snd 55101 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 12895 2 snd,snd_hda_codec
[caribou@arch ~]$ lspci -vv|grep Audio
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
[caribou@arch ~]$ grep Codec /proc/asound/card*/codec*
/proc/asound/card0/codec#0:Codec: Realtek ALC260
/proc/asound/card0/codec#1:Codec: Conexant ID 2bfa
[caribou@arch ~]$ cat /proc/asound/devices
2: [ 0] : control
3: [ 0- 0]: digital audio playback
4: [ 0- 0]: digital audio capture
5: [ 0- 1]: digital audio playback
6: [ 0- 0]: hardware dependent
7: [ 0- 1]: hardware dependent
33: : timer
(unfortunately i don't have any headphones to test if that part is working)
Thanks for your help.

I removed the three lines and rebooted.
I'm not sure what i should test with pavucontrol but there is at least a VUmeter corresponding to a song i'm playing.
I did a speaker-test again still nothing.
Here is the output of pulseaudio -v
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 02ffa703a637440786483fd98ffaeac4.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/caribou/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/caribou/.config/pulse/02ffa703a637440786483fd98ffaeac4-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/caribou/.config/pulse/02ffa703a637440786483fd98ffaeac4-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/caribou/.config/pulse/02ffa703a637440786483fd98ffaeac4-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA Intel/HDA Intel.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1b.0.analog-stereo: front-left: 61310 / 94%, front-right: 61310 / 94%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "ALC260 Analog"
I: [pulseaudio] sink.c: alsa.id = "ALC260 Analog"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "0"
I: [pulseaudio] sink.c: alsa.card_name = "HDA Intel"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA Intel at 0x80000000 irq 41"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "8086"
I: [pulseaudio] sink.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c: device.product.id = "2668"
I: [pulseaudio] sink.c: device.product.name = "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
I: [pulseaudio] sink.c: device.form_factor = "internal"
I: [pulseaudio] sink.c: device.string = "front:0"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "Realtek ALC260"
I: [pulseaudio] sink.c: alsa.components = "HDA:10ec0260,104d0000,00100300 HDA:14f12bfa,104d0200,00090000"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Built-in Audio Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel at 0x80000000 irq 41"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "2668"
I: [pulseaudio] source.c: device.product.name = "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -128.00 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-ALC260 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-ALC260 Analog] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "ALC260 Analog"
I: [pulseaudio] source.c: alsa.id = "ALC260 Analog"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel at 0x80000000 irq 41"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "2668"
I: [pulseaudio] source.c: device.product.name = "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "front:0"
I: [pulseaudio] source.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] source.c: device.buffering.fragment_size = "176400"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "Realtek ALC260"
I: [pulseaudio] source.c: alsa.components = "HDA:10ec0260,104d0000,00100300 HDA:14f12bfa,104d0200,00090000"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from 0.00 dB to 35.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -35.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-ALC260 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-ALC260 Analog] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #7; argument: "channels=2").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #13; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c1"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
I: [pulseaudio] main.c: Daemon startup complete.
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-source-ALC260 Analog] alsa-source.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC260 Analog] alsa-sink.c: Device suspended...

Nokia X2-00 with low volume in earpiece

My Nokia x2-00 became with low volume when in conversations. I have pressed the volume keys to the max, but still the volume is very low.
Any suggestions? Will a firmware update fix this?
Thanks,
Pedro

hi mate,
Have you checked via Nokia Suite on your PC if there are any firmware updates available for your device? IF there is, please update to the latest version offered. If that doesn't work, you can try re-installing your current firmware through Nokia Suite and if that doesn't work either, try Restoring your phone to factory settings.
Failing that, you will need to take your phone to your local Nokia Care for them to inspect: http://nokia.com/support

Why are midi notes in piano roll lower volume when selected with pointer than when in playback?

I'm using Logic X on mac mini. When I select midi notes in piano roll with the pointer, they are at a lower volume than when in playback? I use Logic X on mac mini with Apogee Duet.

Thanks for your help Erik. I found the answer you posted about 30 minutes after posting my question. To me it doesn't answer my question 100%. The reason is that I can't expect to believe that every time someone records midi they have to go through all these extra steps to merge it (and it is not easy to do because they are hidden behind one another) in fact my problem was so unique that other logic users didn't understand why I am having this trouble. SO that brings me to my conclusion, that I have some setting that is keeping this from being a seamless operation and transforming it into a bunch of hoop jumps. Thoughts? Could it have to do with record settings of "merge"? I saw a few different settings there but none make sense to me.
thanks again.

How do i change ringtone volume to ring with low volume first and then gradually increase to the max volume ?

how do i change ringtone volume to ring with low volume first and then gradually increase to the max volume ? this feature was available before but is still available now ? this is for IOS8 running on Iphone 5c.

I've never been aware of a function like this in the past. You could create a personal ringtone that would last 30 seconds or less and set the volume on that ringtone to do that with an audio editor, such as Audacity.

How to overwrite expired volumes with lower sequence number?

I test expiration policy.
I have a tape library with two volumes.
I defined expiration policy after some time when write windows closed.
lsv -L test_lib
in 1: volume mf_test-000001, barcode e61bcfea534e10281bb000b5df3a54e, 4148676704 kb remaining, expired
in 2: volume mf_test-000002, barcode e6251c26534e10281bb000b5df3a54e, 4148657504 kb remaining, expires 2011/04/28.11:49
How to make OSB overwrite 1st expired volume when writewindow closed on the 2nd volume (with lower sequence number)?
Is it possibly without rotation policy?
If not how to set the policy in my case?
Thanks!

Thanks, Rich!
But I have now following situation:
ob> lsv -a
VOID OOID Seq Volume ID Barcode Family Created Attributes
104 104 1 mf_test-000001 b927cfe85411102ab8e000b5df3a54e mf_test 04/29.10:53 expired
107 107 1 mf_test-000004 b93699ec5411102ab8e000b5df3a54e mf_test 04/29.13:32 closed; expires 04/29.14:32
ob> lsj -l
oracle/11:
Type: database emgc (dbid=1838014073)
Scheduled time: none
State: processed; Oracle job(s) scheduled
Priority: 100
Run on host: (administrative server)
Attempts: 0
oracle/11.1:
Type: datafile backup
Backup piece: 2jmb0c82_1_1
Family: mf_test
Encryption: awaiting job completion
Scheduled time: none
State: pending resource availability
Priority: 100
Run on host: dbsora98
Deferred because: a required device is not available
Attempts: 2
ob> catxcr --tail 100 oracle/11.1
2011/04/29.14:19:49 ______________________________________________________________________
2011/04/29.14:19:49
2011/04/29.14:19:49 Transcript for job oracle/11.1 running on dbsora98
2011/04/29.14:19:49
2011/04/29.14:19:49 ---
2011/04/29.14:19:49 No volume could be found in vl_test (for drive vd_test_2) to use for job oracle/11.1.
2011/04/29.14:19:49 A volume usable for media family mf_test is needed to perform a backup.
2011/04/29.14:21:24 ______________________________________________________________________
2011/04/29.14:21:24
2011/04/29.14:21:24 Transcript for job oracle/11.1 running on dbsora98
2011/04/29.14:21:24
2011/04/29.14:21:24 ---
2011/04/29.14:21:24 No volume could be found in vl_test (for drive vd_test_1) to use for job oracle/11.1.
2011/04/29.14:21:24 A volume usable for media family mf_test is needed to perform a backup.
Edited by: OraSun on 29.04.2011 1:38
I'm sorry, that's ok. other job is holding the 1st volume.

I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

I'm having the same issue. After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low. I am not able to slide to get any more level out of the system.
Can you adjust the master volume on your system?

Songs with very low volume

Hi!!
(Excuse me for my bad english language.)
The songs are being exported with very low volume. I mixed all tracks to best use. I tried all the quality options, including no compression. I also tried with and without Normalize. What else can I try? What could be happening? Tks!

Hi stosfot,
Thanks for using Apple Support Communities. This article has some information on adjusting the master volume of a track that may help:
GarageBand '11: Adjust the project’s master volume
http://support.apple.com/kb/PH1997
Cheers,
- Ari

Very low sound with 100% volume level

Hello. I have bought HP G42 - 369TU laptop 2 weeks back. I have some problem reguarding the sound. Eventhough I kept in the maximum sound.. the sound i hear is less than my privous laptop G6000 . Is there any hardware problem? or is that model has low volume sound? Please advice..
Thank you.

I have a similar problem with my Mini 110 netbook. My maximum setting appears to be 50. I have posted this problem tonight and am awaiting a reply.
padyboy

Low Volume with Intel HDA ALC889

Similar Messages

Maybe you are looking for