Lower case edge / data connection refused on BB 8800
Hello, I need help to activate the data service.
I have a new unlocked T-Mobile BBerry 8800 bought from eBay.
When I inserted a sim card took from my Pearl 8100 it says data connection refused.
I upgraded the OS and now the version 4.2.1.101 platform 2.3.0.80 is installed.
The message "data connection refused" disappeared and replaced by the provider's name. But the problem remains exist. Indicator on the top right screen displays "edge" not "EDGE". (http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02623&sliceId=SAL_Public&dialogID=141640847&stateId=0%200%2066797886)
I took the sim card out and put it into Pearl 8100. Sim card works well, emails and net browser are just perfect. I reinserted it back into BB 8800, but nothing changed, "edge" signal appears, my web icon disapearead. The handheld is functioning no more than a mobilephone.
The technical support staff had help me through this process. They gave up and concluded something wrong with the handheld.
Can anyone please help?
I am not sure what provider u are with and I assume u must have a data pakage so u are able to access these services-what it means is that it isn't connecting with RIM and u must go thru RIM to acess these services is the simplest way I can put it LOL---any way to fix ( make sure u have at least 3 bars of signal strength) go to OPTIONS- ADVANCED OPTIONS-HOST ROUTING TABLE THEN HIT THE BUTTON TO THE LEFT OF THE TRACKBALL(menu button) click register now) this regisers u with RIM u will receive a message in your messages box----if this does't work take your battery off for a min and put it back on it refeshes anything new that was done on the network----hope this helps
Similar Messages
-
How to get rid of Data Connection Refused message
I have a blackberry 8703e, i recently disabled my blackberry data pack and ever since i did that I get the message data connection refused on my home screen. I know there is a solution for this problem for other devices like 8830 by simply going to Mobile Network and setting Data Services to OFF, but my device does not have data services as a option, I'm on the lastest OS 4.2.
Another thing I noticed that now my battery gets drained faster, I have a new battery and lasts less than a day, compared to almost 2 days when I had the data plan on.. strange...About the battery - probably you're using some applications which consume energy.
And check this link -
Data connection refused. Computer does not detect blackberry
Please anybody can help me. I've installed Desktop Manager and Blackberry USB, but computer still doesn't detect my blackberry. My blackberry model is 7130g. Thanks
Call your carrier and get a Blackberry Data Plan.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~ -
How to investigate persistent data connection?
I have an E6. I have configured a GMail and Yahoo email accounts but have configured it to retrieve only at 8am. So data will be used only during that time or whenever a known internet accessing application is running.
This was for around 3 months. As soon as I exit say Opera, the data connection would be closed.
But for the past 2 weeks, the data connection refuses to terminate. Even when I manually terminate by going into Connections, it gets reconnected automatically.
This behaviour appears suspiciously like a virus / spyware running hidden because task manager shows no running application other than F-Secure which is disabled except for theft protection.
How to find out if there is any hidden process accessing the internet?
How to know which applications run at startup?
Solved!
Go to Solution.Monitor it with this app called 'NetQin Mobile Guard'
http://mobile-fileshare.com/symbian/(mobiplanet.in)NetQin%20mobile%20guard%20v3.2%20by%20Stanley08.s... -
Converting lower case to upper case data of flat file
Hi All,
I have a requirement purche order creation by using bapi function module.My requirement is when I am uploading the flat file and if flat file contains the data in lower case then before passing it to the function module i want to convert it in to Upper case. please tell me how can I do this.
its very urgent.
Regards,
Amit.hi,
Use translate statement ..
DATA letters(3) TYPE C.
MOVE 'abc' TO letters.
TRANSLATE letters TO UPPER CASE.
write : letters.
Also refer
/people/alvaro.tejadagalindo/blog/2006/12/21/does-abap-lacks-of-string-processing
Regards,
Santosh -
Hibernate for lower case data(case sensitive) in oracle 10G
Hi,
I generated my data (oracle 10G release 2) using lowercase data types and table names. This requires queries in the strict form of -
Select "Column_Name" from "Table_name";
But Hibernate makes the queries as -
Select Column_Name from Table_Name;
driver I am using is oracle.jdbc.driver.OracleDriver
Jar is ojdbc14
and dialect is org.hibernate.dialect.Oracle9Dialect
The problem is:
table or view does not exist.
as it(lower case data) does not recognize the hibernate query format.
Can anyone suggest the proper driver and Jar to overcome the problem.
Regards,
AnkitAnkit,
Just bite the bullet and don't use case-sensitive identifiers :-)
I don't use "hibernate", but maybe you can add the double-quotes -- " -- in the XML file?
I don't think there's a JDBC driver that adds the double-quotes for you. So I think your only option (if you insist on using case-sensistive identifiers) is to explore possibilities through "hibernate" itself.
I also don't think there's any database setting that allows Oracle to accept case-sensitive identifiers.
Good Luck,
Avi. -
Fms edge connected refused with unknown reason.
i found some error logs in edge.*.log, like this.
2012-11-14 18:39:04 3903 (e)2661034 Connect failed ( , 1161928336 ) : Connect failed: Connection refused (111) -
2012-11-14 18:39:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 18:40:31 3903 (e)2661034 Connect failed ( , 3 ) : Connect failed: Connection refused (111) -
2012-11-14 19:47:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 19:48:28 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 19:49:10 3903 (e)2661034 Connect failed ( , 1170349712 ) : Connect failed: Connection refused (111)
it seems because of invalid ports resulst in TCP connection faild.But abvously, these ports are not used in the applications, even some port is out of valid port range. Does anyone konws what the reason.
btw, there are two adaptors on our machine, one is for intranet, the other is for internet. And the lattter is configured with to IPs
like this:
eth0 Link encap:Ethernet HWaddr 00:21:5E:26:62:28
inet addr:******* Bcast:******* Mask:255.255.255.0
inet6 addr: fe80::221:5eff:fe26:6228/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:116994653 errors:0 dropped:0 overruns:0 frame:0
TX packets:151851798 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:52655302829 (49.0 GiB) TX bytes:124235260628 (115.7 GiB)
Interrupt:106 Memory:ce000000-ce012800
eth0:1 Link encap:Ethernet HWaddr 00:21:5E:26:62:28
inet addr:**** Bcast:**** Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1Is there any info in the node manager log files?
You can try changing the health check timeout.
# Health Check Interval: Specify the interval (in seconds) between Node Manager health state queries to the Managed Server. Enter a value between 1 and 2147483647 seconds (default is 180 seconds).
# Health Check Timeout: Enter the number of seconds that Node Manager will await a response to a health state query. If the timeout is reached, Node Manager assumes the Managed Server is "failed", and kills the process. Enter a value between 1 and 2147483647 seconds (default is 60 seconds). -
Sccheck fails with connection refused
I have a 2 node cluster that was just upgraded from SC3.0 to SC3.1u4 (8/05). sccheck passes on node aemhrsDV1 and fails with the following message on aemhrsDV2:
root@aemhrsDV2 # sccheck -b -v2 -h aemhrsDV2
sccheck: Requesting explorer data and node report from aemhrsDV2.
sccheck: aemhrsDV2 error: Connection refused
sccheck: Unable to run checks on: aemhrsDV2All SC3.1 patches have been applied. All availble agents were updated using 'scinstall -u update -s all' and re-registered. Test ip addresses were supplied during 'scinstall -u update -S interact'.
Both nodes come up fine individually in cluster (through step 10) but together the log /var/cluster/ucmm/ucmm_reconf.log shows:
Thu Aug 9 21:47:04 EST 2007 SUNWscucm.ucmm_reconf udlm started in cmmstep2
Thu Aug 9 21:48:44 EST 2007 SUNWscucm.ucmm_reconf udlm completed successfully in cmmstep2
Thu Aug 9 21:48:44 EST 2007 SUNWscucm.ucmm_reconf cvm started in cmmstep2
Thu Aug 9 21:48:45 EST 2007 SUNWscucm.ucmm_reconf cvm completed successfully in cmmstep2
Thu Aug 9 21:48:45 EST 2007 SUNWscucm.ucmm_reconf ucmm reconfiguration step 2 completed
Thu Aug 9 21:48:45 EST 2007 SUNWscucm.ucmm_reconf Step: cmmreturn CURRNODES=0 1Running scstat -i hangs forever at IPMP Groups with both nodes in cluster but separately displays the adapters and status.
Node 1
root@aemhrsDV1 # ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.100.30 netmask ffffff00 broadcast 192.168.100.255
ether 0:3:ba:39:f5:62
ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.101.30 netmask ffffff00 broadcast 192.168.101.255
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.251.30 netmask ffffff00 broadcast 192.168.251.255
ether 0:3:ba:39:f5:ef
ge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 10.10.3.30 netmask ffffff00 broadcast 10.10.3.255
groupname nafo0
ether 0:3:ba:b:e:8
ge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 4
inet 10.10.3.31 netmask ffffff00 broadcast 10.10.3.255
qfe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
inet 10.10.3.33 netmask ffffff00 broadcast 10.10.3.255
groupname nafo0
ether 0:3:ba:17:97:d5
qfe0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 5
inet 10.10.3.32 netmask ffffff00 broadcast 10.10.3.255
qfe2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
inet 192.168.2.112 netmask ffffff00 broadcast 192.168.2.255
ether 0:3:ba:17:97:d7
qfe7: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 7
inet 172.16.1.1 netmask ffffff80 broadcast 172.16.1.127
ether 0:3:ba:17:98:68
qfe3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 8
inet 172.16.0.129 netmask ffffff80 broadcast 172.16.0.255
ether 0:3:ba:17:97:d8
clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1486 index 9
inet 172.16.193.1 netmask ffffff00 broadcast 172.16.193.255
ether 0:0:0:0:0:1Node 2
root@aemhrsDV2 # ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.100.40 netmask ffffff00 broadcast 192.168.100.255
ether 0:3:ba:39:f5:50
ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.101.40 netmask ffffff00 broadcast 192.168.101.255
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.251.40 netmask ffffff00 broadcast 192.168.251.255
ether 0:3:ba:39:f5:20
ge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 10.10.3.40 netmask ffffff00 broadcast 10.10.3.255
groupname nafo0
ether 0:3:ba:b:41:22
ge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 4
inet 10.10.3.41 netmask ffffff00 broadcast 10.10.3.255
qfe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
inet 10.10.3.43 netmask ffffff00 broadcast 10.10.3.255
groupname nafo0
ether 0:3:ba:17:96:2d
qfe0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 5
inet 10.10.3.42 netmask ffffff00 broadcast 10.10.3.255
qfe0:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 5
inet 10.10.3.35 netmask ffffff00 broadcast 10.10.3.255
qfe7: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 6
inet 172.16.1.2 netmask ffffff80 broadcast 172.16.1.127
ether 0:3:ba:17:97:18
qfe3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 7
inet 172.16.0.130 netmask ffffff80 broadcast 172.16.0.255
ether 0:3:ba:17:96:30
clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1486 index 8
inet 172.16.193.2 netmask ffffff00 broadcast 172.16.193.255
ether 0:0:0:0:0:2
root@aemhrsDV1 # scstat
-- Cluster Nodes --
Node name Status
Cluster node: aemhrsDV1 Online
Cluster node: aemhrsDV2 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: aemhrsDV1:qfe7 aemhrsDV2:qfe7 Path online
Transport path: aemhrsDV1:qfe3 aemhrsDV2:qfe3 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: aemhrsDV1 1 1 Online
Node votes: aemhrsDV2 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d3s2 1 1 Online
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: rmt/1 - -
Device group servers: rmt/2 - -
-- Device Group Status --
Device Group Status
Device group status: rmt/1 Offline
Device group status: rmt/2 Offline
-- Multi-owner Device Groups --
Device Group Online Status
-- Resource Groups and Resources --
Group Name Resources
Resources: nfs-test aemhrsDVlh
Resources: hastp-aemhrsDV1-rg -
Resources: hastp-aemhrsDV2-rg -
Resources: rac-framework-rg rac_framework rac_udlm rac_cvm
-- Resource Groups --
Group Name Node Name State
Group: nfs-test aemhrsDV1 Offline
Group: nfs-test aemhrsDV2 Online
Group: hastp-aemhrsDV1-rg aemhrsDV1 Online
Group: hastp-aemhrsDV2-rg aemhrsDV2 Online
Group: rac-framework-rg aemhrsDV1 Pending online
Group: rac-framework-rg aemhrsDV2 Online
-- Resources --
Resource Name Node Name State Status Message
Resource: aemhrsDVlh aemhrsDV1 Offline Offline
Resource: aemhrsDVlh aemhrsDV2 Online Online - LogicalHostname online.
Resource: rac_framework aemhrsDV1 Starting Degraded - reconfiguration in progress
Resource: rac_framework aemhrsDV2 Online Online
Resource: rac_udlm aemhrsDV1 Offline Offline
Resource: rac_udlm aemhrsDV2 Online Online
Resource: rac_cvm aemhrsDV1 Offline Offline
Resource: rac_cvm aemhrsDV2 Online Online
-- IPMP Groups --
Node Name Group Status Adapter Status
--------- ----- ------ ------- ------I believe the reconfig is coming from aemhrsDV2 since sccheck will not run.
Suggestions?Also the output from the sccheck commad using 'ksh -x' shows where the error is occurring and exiting with a status of 107.
The line executed is 765 of the script.
# echo "CLASSPATH: ${CLASSPATH}"
${JAVA} -classpath ${CLASSPATH} ${JDEFINES_LIST} ${JAVA_CLIENT} &
JVM_PID=$!
+ JVM_PID=13881
# now wait for java to exit
wait $JVM_PID
+ wait 13881
+ /usr/java/bin/java -classpath /usr/cluster/lib/sccheck:/usr/cluster/lib/sccheck/sccheck.jar:/usr/cluster/lib/sccheck/k
ae/kae.jar:/usr/cluster/lib/sccheck/kae/kae-libs.jar:/usr/cluster/lib/sccheck/kae/eras-common.jar:/usr/cluster/lib/scche
ck/kae/common-libs.jar:/usr/cluster/lib/sccheck/kae/eras-parsers.jar:/usr/cluster/lib/sccheck/kae/explorer-input-source.
jar:/usr/cluster/lib/sccheck/kae/resources:/var/cluster/sccheck/tmp/client.0 -Dcom.sun.eras.common.logging4.config.file=
/usr/cluster/lib/sccheck/sccheck.logging4.properties -Dke.client.log=/var/cluster/logs/sccheck/ke-client.log.0 -Dke.clie
nt.xsldir=/var/cluster/sccheck/tmp/client.0 -Dsccheck.clustername=aemhrsDV -Dsccheck.clustermode=true -Dsccheck.localnam
e=aemhrsDV2 -Dsccheck.privatelocalname=clusternode2-priv -Dsccheck.publicnodenames=aemhrsDV1,aemhrsDV2 -Dsccheck.private
nodenames=clusternode1-priv,clusternode2-priv -Dsccheck.clientnumber=0 -Dsccheck.explorersgzDir=/var/cluster/sccheck/exp
lorers-gz -Dsccheck.explorersUnpackDir=/var/cluster/sccheck/explorers.0 -Dsccheck.gunzip=/usr/bin/gunzip -Dsccheck.tar=/
usr/bin/tar -Dsccheck.brief=true -Dsccheck.vverbose=true -Dsccheck.hostlist=aemhrsDV2 -Dsccheck.outputDir=/var/cluster/s
ccheck/reports.2007-08-10.09:19:37 com.sun.cluster.sccheck.SccheckClient
sccheck: Requesting explorer data and node report from aemhrsDV2.
sccheck: aemhrsDV2 error: Connection refused
sccheck: Unable to run checks on: aemhrsDV2
typeset -i exitstatus=$?
+ typeset -i exitstatus=107
# constuct closing message if reports were created
if ((${exitstatus} > 0)) && ((${exitstatus} < 100)); then
typeset severity=""
printf ""
case "${exitstatus}" in
1) severity=$(gettext '1 (LOW)');;
2) severity=$(gettext '2 (MODERATE)');;
3) severity=$(gettext '3 (HIGH)');;
4) severity=$(gettext '4 (CRITICAL)');;
esac
printf "$(gettext '%s: One or more checks failed.')\n" ${PROG}
printf "$(gettext '%s: The greatest severity of all check failures was %s.')\n" ${PROG} "${severity}"
printf "$(gettext '%s: Reports are in %s.')\n" ${PROG} ${OUTPUTDIR}
fi
+ (( 107 > 0 ))
+ (( 107 < 100 ))
cleanup
+ cleanup
exit ${exitstatus}
+ exit 107 -
How to send a file without getting Connection Refused??
Hello everyone!
I'm developing a FTP (Client and Server) program as a project and I have 2 main problems:
1. The program can't connect to computers with router (Connection Refused error)
2. If a computer with router connects to me, the program will not transfer the file (Connection Refused error again). but if it does, my friend's internet is suddenly disconnect after one transfer
what should i do?!? : //
everything is working well on one computer, but when i'm trying to work on 2 computers its screwed
***FOR EVERY TRANSFER I OPEN A DIFFERENT SOCKET AND CLOSE IT (AND ALL THE OTHER STREAMS) IN CASE OF EXCEPTION OR COMPLETION
Thanks!!cotton.m wrote:
Oron wrote:
lol
sorry..just want you to notice
so how the other ftp programs transfer files? : //
i have a test up against 2 testers and my program will not transfer files between 2 computers : ///Are these two computers on the same network? Aka behind the same router? If so then there is another problem, which is either a bug in your program and/or a firewall on one or both of the computers.
How does FTP work normally? Well in most cases you are talking to a server that is on the internet. This server has been configured to be behind or on a network where the routers are not blocking requests to connect to FTP ports (among other services). So nothing different other than it is configured correctly.
I do suspect your program may have some bugs as well. For example when you talk about it dropping the connection after one transfer. That doesn't sound too great.when i checked the program...no
in the test...yes
so the server has no blocking ports, but what about a client with a router?..how do the programs pass the client blocking?
when i checked the program with a friend (i have a modem and i was the server) all the data was perfectly transfered (moving among folders, deleting files, creation of folders-->all these actions on the server..sending codes, strings and stuff), but when i tried to transfer a file it did connection refused :S
i can bring a link to the file that do the transfer and if you have patience to read -
Decision Service calls failing with connection refused
Hi All,
Breifing of the bpel process - Async bpel process XX_BPEL_ASYNC_002 calls decision services and a sync bpel process XX_BPEL_SYNC_001.
We have moved to cluster 10.1.3.5.0 from 10.1.3.3.0 and the deployement of the bpel process and the decision service done on two nodes i.e., node51 and node55.
But the bpel process is able to call the decision service only when the node 51 is UP and running, but if node 51 is down and node 55 is up and running it is failing with connection refused error. It is also working when 55 is DOWN and 051 is UP.
the exact error is:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused.
We are using file based repository.
It is failing when it tries to call particular url:
http://loadbalancerurl:7777/orabpel/domain001/XX_BPEL_ASYNC_002/1.0/decisionservices.decs
Can anyone please help me or advice me for finding some solution.
Thanks
SreejitHi Fatsah,
It has been a while since we resolved this problem. But these were the basic steps that we had taken.
The receiver was configured a File adatpter with FTP:
Port: 10021
Connection security : FTPS (FTP using SSL/TLS) for Control and Data Connection
Command Order: AUTH TLS,USER,PASS,PBSZ,PROT
Problem: The message was blocked in our firewall.
FTPS in this case used 10021 as the control port and the firewall allowed to pass the control request.
Once the connection was accepted at the control level, it generated a random port number to pass data on the channel.
This random port number was blocked in the firewall.
We monitored the data port numbers generated at firewall. Then we configured the firewall to open any port number between the specific IP addresses of the sender and the receiver. That resolved the problem.
Hope this helps!
Please give points if this is helpful.
Thank you.
Dharmasiri Amith -
SQL Server 2000/CFMX 7 - connection refused: connect
Hi all,
I have been trying to troubleshoot this for a few weeks now,
I have looked high and low and tried multiple solutions that worked
for other people, none have worked for me.
I have SQL Server 2000 Version 8 and Coldfusion 7.0.2.
I can't seem to make a database connect in Administrator. I
have tried changing the port that SQL Server listens on, I made a
new security role in SQL Server specifically for the database I'm
creating, I tried making an ODBC connection (which can see the SQL
Server) in windows then connecting to that, nothing is working.
I thought it might be the windows firewall, it isn't since it
is off, my TCP/IP protocol is enabled, I am running out of ideas.
If anyone can suggest anything, please do this is what I see
everytime.
Connection verification failed for data source: IFDA
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect
I'm dying over here.
Thanks.This might be a dumb question, but have you searched Google
groups? Its one of the first places I go when I get error messages
I don't understand.
Googling this:
"java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect"
..gave me 84 results (ok, a lot of them point back to these
forums but I still find searching thru Google easier than using the
built in search) - here's a
Link
hth - cheers. -
Connection refused error showing in ironport s170 - WSA
Connection refused error showing in ironport s170 - WSA
I am getting “Connection refused” error while I connect ironport s170 through console cable. also i am not able to connect it through HTTP and SSH. Complete output is given below.
Last login: Thu Sep 11 07:16:59 on cuad0
Copyright (c) 2001-2011, Cisco Systems, Inc.
AsyncOS 7.5.2 for Web build 303
Welcome to the Cisco IronPort S170 Web Security Appliance
Traceback (most recent call last):
File "/usr/build/iproot/ap/ipoe/ipoe/bootstrap.py", line 55, in <module>
File "/data/lib/python2.6_7_i386_nothr/runpy.py", line 128, in _run_module_as_
main
"__main__", fname, loader, pkg_name)
File "/data/lib/python2.6_7_i386_nothr/runpy.py", line 34, in _run_code
exec code in run_globals
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/cli.py", line 426, in <modul
e>
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/external_auth/__init__.py",
line 212, in initialize
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/external_auth/__init__.py",
line 118, in _setup_old_authentication
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/command_client.py", line 674
, in quick_read_var
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/command_client.py", line 133
, in connect
Commandment.CommunicationError: <host name>: Network communication error
: Connection refused
AsyncOS <host name> (cuad0)
login:Hi,
You can upgrade to 7.7+ but if you require a root cause analysis I suggest you to open a TAC case.
Regards,
Luis Silva -
Database control shows java.lang.Exception: IOException in connect refuse
Hi All,
I need some help on this issue.
I followed MOS Doc 259387.1 to reset dbsnmp password because its password is unknown.
The error is
Error
java.lang.Exception: IOException in sending Request :: Connection refused
Thanks in advance.
leimHi,
Posting this error in metalink you could get nice directions...
I have the same problem, and looks fixed now...
Try review doc 420761.1
And what I do, was:
Stop dbconsole
start dbconsole (fails)
review logs generated and look this errors:
$ORACLE_HOME/<hostname>_<instance_name>/sysman/log
doing there a directory listing by date, "ls -ltr" the last file showed is the modified one, in my case was:
rw-r--- 1 oracle oinstall 920007 Oct 27 19:33 emoms.log
-rw-r----- 1 oracle oinstall 522694 Oct 27 19:34 emdb.nohup
-rw-r----- 1 oracle oinstall 39130 Oct 27 19:38 emdctl.trc
tail emdctl.trc
2009-10-27 19:19:05 Thread-14236448 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-360,and testTZoffset for -05:00:-300 do not match
2009-10-27 19:19:05 Thread-1125024 WARN http: snmehl_connect: connect failed to (<hostname>:3938): Connection refused (error = 111)
And tail emdb.nohup gives you the instructions to fix the first one, in my case, solving the TZRegion was enough.
$ tail emdb.nohup
----- Tue Oct 27 19:19:05 2009::The agentTZRegion value in /oracle/product/102/db_1/dbserver.uadec.mx_siin/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script 'mgmt_target.set_agent_tzrgn' to get the value propagated to repository -----
Hope this could help you.
Regards
Edited by: EnriqueGB on 27/10/2009 08:16 PM -
HttpConnection.getResponseCode generates a Connection Refused exeption
I have the following problem:
I connect to a webserver, this works fine. Then I write data to the webserver, this also works fine. After writing the data, I determine the http response code to see if everything was successfull. Every so often this generates a "connection refused" exception. This happens even after the connect and the write were successfull. I find this strange, since I was able to connect and write data (this data has arrived at the server because I can log it there without a problem).
Can anyone explain this behaviour to me, because I am lost here.
MarkHave found that wildcard addresses matches any address of the local system, and that in IPv4, the wildcard address is 0.0.0.0. Can check for this with InetAddress.isAnyLocalAddress().
This means that I could potentially handle these cases by adding code to "ping" a host such as "tigers.com.au" using
InetAddress address = InetAddress.getByName(name);
if (InetAddress.isAnyLocalAddress() {
.... do something, eg raise exception
}But this is not fully satisfactory, as I would rather know that a "connection refused" exception is raised, which is actually the case with "tigers.com.au" (as all the browsers seem able to detect). I am not entirely sure what the relationship is between a site that has "connection refused" and it returning an ip address of 0.0.0.0. I don't think they are synonymous.
Any thoughts? -
Outbound Mail not being accepted: connection refused
For some reason yet to be determined I none of the users in our local network can send mail. Everything was working finne the other day then all of a sudden, one by one, all users lost the ability to send mail externally.
The SMTP error log was reporting a relay access error for users the I enabled the Login Authentication for SMTP and the messages seemded to be going through. But the messages now are not leaving the server apparently. Even though the mail clients send the message successfully, the messages are not making it out of the server.
Here is my postconf -n:
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 20971520
mydestination = $myhostname,localhost.$mydomain,saintmichaelschool.org,mail1.saintmichaelschool .org,192.168.181.2
mydomain_fallback = localhost
myhostname = mail.saintmichaelschool.org
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost = mail1.saintmichaelschool.org
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions =
smtpdenforcetls = no
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/postfix/server.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 450
I'm obviously a novice with mail servers so any hepl is greatly appriciated.
Here is a line from my SMTP log from the sample message I'm trying to send:
Feb 16 11:19:46 mail postfix/smtp[18133]: AEF07178F4F: to=<[email protected]>, relay=none, delay=3897, status=deferred (connect to mail1.saintmichaelschool.org[65.173.83.122]: Connection refused)I had a dig around google on the postfix 502 error and found one reference which stated that ...
Permanent Errors
These indicate a permanent error and tell the sending system to bounce the message:
502 Command not implemented
http://www.answers.com/topic/simple-mail-transfer-protocol
If this is the case then the 502 error I got when telneting in would we taken as a final failure notice and they would not bother retrying, as I did.
I've no idea why it would be giving this error. Unless someone else can chip in with more info... ?
You can check for the error by connecting from a remote location by telnet...
======================================
In Terminal, type: "telnet mail1.saintmichaelschool.org 25"
there is a space beteen your hostname and last "25". This tells Telnet to connect on SMTP port 25.
You should get a response:
Trying... x.x.x.x....
Connected to.... dah de dah... your.server.name ESMTP Postfix
Type: "MAIL FROM: [email protected]" where [email protected] is any email address
Response: 250 ok
Type: "RCPT TO: [email protected]" where [email protected] is the recipient in your domain
Response: 250 ok
Type: "DATA"
Response: 354 End data with... dah de dah...
Type a message and finish it with a "." (period) on a line by itself.
Response: OK: queued as... dah,de,dah.
Type "QUIT" to exit
===========================
I was getting the 502 error immediately after the Mail From command. If I repeated it, it was accepted OK. However, it looks like a sending server does not try repeating it.
Good luck!
-david
Maybe you are looking for
-
for some reason after updating to iOS 5, my videos no longer play where i left off, even if i set on the settings to do so. and yes i've tried restoring again, playing video over and over. resetting the video over and over. after a while of tinkering
-
Improper display with Currency/Unit in drilldown
Hi , There are 2 KFs in the query , 2nd KF is one level down (i.e inside the triangle of first KF) . KF's are : Net value Net val in doc currency when i drill down on Currency/unit it just drills down by statistics currency (i.e for first KF) it does
-
Installing Java Add-In for an existing ABAP System -Error SQL compatibility
Hello gurus, We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ER
-
Playlist is Music Not Recognized in Apple TV
Hello all, At least with iTune 9.0, there is a built-in Podcasts, Music, etc. playlists. These don't seem to be recognized on the Apple TV (even with 3.0). Can someone else confirm this behavior? It seems the iPhone understands it but not Apple TV. J
-
Dear All, i m getting dump in st22.DBIF_REPO_SQL_ERROR but i m unable to understand this dump error.plz any1 tell me what is this ??? st22 dump log i have attached with it. What happened? The system is no longer linked to an ORACLE instance. No furth