Lower Cost P2 Media

"Panasonic announced today a new series of memory cards called microP2 card, which have an SD card form factor. The simultaneous introduction of a microP2 Card Adaptor assures that the new series of 64GB and 32GB microP2 cards will operate in current P2 hardware. Its design allows Class 10 or high-quality SD cards (at bit rates only up to 50Mbps) to be used in P2 products."
https://www2.panasonic.com/webapp/wcs/stores/servlet/prModelDetail?storeId=11301&catalogId =13251&itemId=671502&modelNo=Content04022012052157415&surfModel=Content04022012052157415
Here's the bad news, for anyone wanting to invest in the 250 this year.
"The microP2 media and microP2 Card Adaptor will be available in spring 2013."

It was recorded on an HVX200 and then copied to a backup drive (which has been our workflow for the whole project). It was shot out of town, so I don't have the camera or the P2 device to repair it.
I'm importing the P2 media via FCP's P2 media import window. Is there any other way? (It's worked for all the other media on this project.)

Similar Messages

Looking for a free or low cost EJB server

I'm looking to start my own web app to help teach myself EJB and am looking for a free or low-cost ejb app server that I can work on. I realize I get what I pay for so performace isn't an issue. Anyone have suggestions?

Go to
http://www.jguru.com/faq/view.jsp?EID=241193

There is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter in there low cost mobile

there is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter function in excel in there low cost mobile.
APPLE KINDLY PROVIDE THIS FEATURE AS UPDATE SOON,COZ I WORK ON EXCEL N NUMBERS IN MY IPAD IS DEAD WITH OUT FILTER FUNCTION,I CAN NOT TRAVEL WITH MY IPAD DUE TO THIS REASON,AS I HAVE TO BE IN FIELD WITH SALES FORCE SO I BOUGHT IPAD.

Probably you know that the new version of Numbers for iOS uses the filters created in the Numbers for Mac version.
It's not the best solution but it helps (of course, if you have a Mac!)

Good low-cost widescreen monitor for one-screen editing?

Hello, I'm on a tight budget, looking for a widescreen monitor that is a good blend of low-cost but good quality (if possible!).
I will be doing all my work off this single monitor. I will unfortunately NOT be able to have a dual-monitor setup, nor have an external reference monitor. I will be editing HDV footage.
Any suggestions? Thanks!

It is a PVA screen with dual DVI and a D-sub connector.
I use three of them and they give me a good BFTB, "Bang-for-the-Buck".
If you consider the various panels in use, they go from low to high in quality, TN >> PVA >> IPS.

Which is the best low-cost camera for my use?

Hi everyone. Been busy and off the forums for a while, but need your expertise once again.
I just found out that the Panasonic HVX-200p that's been on loan to me for 2 years has to be returned. Since I run a non-profit, I am thinking about asking my major donors to buy one for us. So, the question becomes which one? I own the CS4 MC, and you can see my other info in my profile.
I only do educational-type videos in an interview format against a green screen so far. I've been capturing direct to OnLocation via 1394 FireWire at 720p/60fps and editing in an HDV 720p/30 sequence. I sometimes do "man on the street" segments (capturing to OnLocation on laptop). I integrate numerous PSD graphics as educational slides, a lot of AE projects I get from videohive and customize, render, & import into PP, and motion backgrounds like Pond5's weekly free stock footage (much of this stuff gets resized, of course). I do some scoring and some SFX and export the audio to SB for touchup. I use a bunch of Lowes/Home Depot worklamps with fluorescent bulbs for lighting the subject and background. I key my backgrounds using PP/AE Dynamic Link. Oh, and I'll need a lapel mic and a tripod, too. I would prefer not to rule out shooting at 1080i/p at some point.
I export H.264 highlight clips which get uploaded to Vimeo and embedded in our website using prettyPhoto features. Ultimately, the finished PP project is exported as MPEG2-DVD, finished in Encore, burned via ImgBurn. If you want to see a good example, watch this http://vimeo.com/23346431. Caution: this is religious material. Be sure to repent before watching
So, there's not really much heavy lifting here. But when it comes to what is the minimum I need with the options of capture formats, etc., I'm clueless. I've read about problems with AVCHD, and although low-cost, is it really a problem for what I do? I trust this forum more than online reviews, and I'd appreciate recommendations of specific models and where to buy, if possible. Also, what about used cameras? Please remember, the budget is tight.
All suggestions and questions are welcome and very much appreciated.
Paul

Actually, two things surprise me in your statement and one is simply incorrect:
As for Broadcast quality..... a little station called CNN - you might have heard about them bought 250 of them from Panasonic about a year ago.
First, that CNN would buy JVC cameras not from JVC, but from Panasonic.
Second, there are no JVC cameras on the BBC approved list at all, see http://downloads.bbc.co.uk/commissioning/site/BBC_Approved_HD_Cameras.pdf and the only affordable ones on the list in the handheld category are the Canon XF300/305. Maybe that is the reason the BBC bought 350 of these. Even the Sony XDCAM EX is only accepted in combination with a 50 Mb disk drive, not in the native 35 Mb format.
The BBC approved list is a list that most broadcasters adhere to, including CNN, Discovery, ARD and NGC.
The JVC GY-HD100U is definitely not acceptable for HD, and in no way HD broadcast ready. But that CNN bought that number of these cameras is probably caused by the fact that they think these deliver better quality than regular phones. And it does not use XDCAM, but a very simple HDV codec, limited to 1280 x 720 resolution. See http://pro.jvc.com/prof/attributes/specs.jsp?model_id=MDL101539&feature_id=03
This simply means that the Canon codec is very acceptable to the BBC for HD programs. The XF100 uses the same codec, but is only a single sensor camera and for that reason alone not approved by the BBC.
Paul, if you can live with the limitations of a single sensor camera - and given your intended purposes, I think you can - the JVC does not even come close and the XF100 material will be hardly worse than the XF300/305. To the untrained eye the results are almost the same.

Is there a way to adjust shadows in iMovie 11? WhenI adjust brightness it changes shadows also. If not is there free or low cost software available? My operating system is Lion.

Is there a way to adjust shadows in imovie 11. When I adjust brightness, it changes shadows also. If not, is there free or low cost software that I can download? I am using Lion 10.7.1

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Searching for a low-cost plug for doing better slow motion clips.

Where can I find a low-cost or free plug-in for doing better slow motion clips? I produce alot of sports videos and use FCPHD but am looking for better quality. I am not necessarily looking for time-remapping (it confuses the ** out of me). Just want to simply slow down clips and not be as choppy as FCP turns out.
Thanks for any help!
Ymir

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Now have iphone6 and signed for different type lower cost account. Not seen on billing service. to have started Oct 1,2014

**after receiving iphone6 and signing 2 year contract, negotiated for a change in plan with lower cost and discount... not seen on october bill as promised..totally unable to obtain help on phone to verizon. thanks

Thanks for the response. I had the 65 advantage plan for 2 years. Service rep at Verizon store assisted me when I activated my new iPhone 6. She noted that over the 2 years i had used only a few minutes of talk, one to 2 texts per month ( at a fee of $. 20 each ) and a minuscule amount of data... and that the phone was for emergency contact to me from my disabled invalid wife only. She searched and found a discount special plan for a savings of $15.00 per month with a final monthly fee before taxes of $45 and not $59 per month to start on Oct 1st. It does not have a name to the plan just that it carries this special discount. That is all I can tell you. Thanks for the assistance. Await your reply. Thanks
Bob Bonus
[email protected] <mailto:[email protected]> this is Incorrect email........... should be [email protected] Wednesday oct 8th, 2014... do not know if you received this response to your email a few days ago. Sorry for the mistake. Await your response. thanks
bob bonus

Don't take the low cost IPAD scam.. they are nearly 4 years old!

When I upgraded my iphone 4 to an iphone 6 three weeks ago, I was offered a low cost mini ipad. I took the deal only to find out later that the ipad you are given is an ipad 1, approx 4 years old now. The mini ipad 3 is now available. I heard something about 30 days return, but when I tried to return it today, was told...no its only 14 day return and I am 9 days over the limit. They willl not take back this obsolete piece of equipment. They would, with a $170 cancellation fee, plus a $70 return fee, or I could cancel my entire service for only $700.00 plus fee! ATT is providing mini ipad 3s at a discount, but I decided that since I had used Verizon since pre Alltel days, I would stay with them. I will be gone in 2 years. Will post to my facebook tomorrow! Scam alert!

Twilly wrote:
This is not a philosophical discussion on hindsight, rather an observation of dirty, and underhanded practices condoned by a large conglomerate that no longer cares about there customers and continues to take advantage of there position. The same goes for there pseudo company that are set up for collect or prepaid calls to people in dire straights such as prison or military. Evil underhanded snakes.
Or a discussion that sales people do what they have done for centuries, even millennium, try to make you buy things you really don't want or need.

Low cost XML editor

Did any of you guys work with a decent low cost XML editor?
We have a scenario where we receive the data in big XML files and we do somewhat complex mapping, it would be really nice to have an editor to create test files, mostly deleting (lots of) nodes from the production files in order to debug the issues.
Is there any good (free?) tool to do this?
Thanks a lot,
Viktor Varga

Hi Viktor,
have a look at <a href="http://www.freexmleditor.com/index.html">Exchanger XML Lite</a>.
It is free for personal use.
<i>It features XML Schema, RelaxNG and DTD based editing, tag prompting and validation, XPath and regular expression searches, schema conversion, XSLT, XQUERY and XSLFO transformations, comprehensive project management, an SVG viewer and conversion, easy SOAP invocations, and more....</i>(<a href="http://www.freexmleditor.com/fxeeditor/features.html">features</a>)
Kind Regards,
Sergio

Insert record incrementing date - low cost

Hi,
I have following record structure
PLAN_LEVEL     PERIOD_NUM     DAYS     OPERATIONSEQ     GROUP_ID     ALLOY     PLANNER_CODE     DEPARTMENT_CLASS     DEPARTMENT     LOAD_HOUR     OFFSET_DATE     OFFSET
0     1     20     150     525150     INCONEL alloy 625     WIRE ROD     CD     WP     8.45402793     3/19/2007     14
0     1     20     140     525150     INCONEL alloy 625     WIRE ROD     CD     BA     4.586287974     3/17/2007     30
0     1     20     90     525150     INCONEL alloy 625     WIRE ROD     MM     MW2     0.750050215     3/12/2007     51
0     1     20     70     525150     INCONEL alloy 625     WIRE ROD     MM     M2M     0.027779638     3/12/2007     72
1     1     20     160     525150     INCONEL alloy 625     WIRE ROD     PMD     DPP     1.453799581     3/4/2007     101
1     1     20     140     525150     INCONEL alloy 625     WIRE ROD     CHP     CHP     0.97472359     3/2/2007     132
1     1     20     130     525150     INCONEL alloy 625     WIRE ROD     CHP     SG     4.873617025     2/25/2007     168
1     1     20     120     525150     INCONEL alloy 625     WIRE ROD     CHP     CHP     1.091515669     2/24/2007     205
1     1     20     110     525150     INCONEL alloy 625     WIRE ROD     PMD     PM     0.210131401     2/24/2007     242
1     1     20     90     525150     INCONEL alloy 625     WIRE ROD     PMD     PM     0.262927179     2/18/2007     285
1     1     20     60     525150     INCONEL alloy 625     WIRE ROD     B30     ESR     15.18807308     2/15/2007     331
1     1     20     20     525150     INCONEL alloy 625     WIRE ROD     VIM     VIM     2.191847409     2/12/2007     380there is days column in the table i just need to replicate/insert above data into same table incrementing offset_date.
e.g.
as days value is 20 i have to insert above record group 20 times and increment offset_date by 1 every time so...
for I 1..days here is 20
insert table
offset_date+1 for each record value in this case 12 recordso total insert for this record group will be 12*20 and for each data set it should increase offset_date+1
is there any low cost ( good performance )solution than looping through it.
thanks in advance

May be better:
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
Connected as SYS
SQL>
SQL> drop table t;
Table dropped
SQL> create table t(i number, d1 date, offset number);
Table created
SQL> insert into t values(1, sysdate - 37, 3 );
1 row inserted
SQL> insert into t values(2, sysdate - 34, 7 );
1 row inserted
SQL> select * from t;
         I D1              OFFSET
         1 26.12.2006           3
         2 29.12.2006           7
SQL> SELECT t.i, t.d1 + t2.i - 1, t.offset
2    FROM t
3        ,(SELECT rownum i
4            FROM dual
5          CONNECT BY LEVEL <= (SELECT MAX(offset) FROM t)) t2
6   WHERE t.offset + 1 >= t2.i
7   ORDER BY t.i, t.d1 + t2.i - 1;
         I T.D1+T2.I-1     OFFSET
         1 26.12.2006           3
         1 27.12.2006           3
         1 28.12.2006           3
         1 29.12.2006           3
         2 29.12.2006           7
         2 30.12.2006           7
         2 31.12.2006           7
         2 01.01.2007           7
         2 02.01.2007           7
         2 03.01.2007           7
         2 04.01.2007           7
11 rows selected
SQL> drop table t_temp;
drop table t_temp
ORA-00942: table or view does not exist
SQL> CREATE TABLE t_temp AS
2    SELECT t.i, t.d1 + t2.i - 1 d1, t.offset
3      FROM t
4          ,(SELECT rownum i
5              FROM dual
6            CONNECT BY LEVEL <= (SELECT MAX(offset) FROM t)) t2
7     WHERE t.offset + 1 >= t2.i;
Table created
SQL> SELECT * FROM t_temp;
         I D1              OFFSET
         1 26.12.2006           3
         2 29.12.2006           7
         1 27.12.2006           3
         2 30.12.2006           7
         1 28.12.2006           3
         2 31.12.2006           7
         1 29.12.2006           3
         2 01.01.2007           7
         2 02.01.2007           7
         2 03.01.2007           7
         2 04.01.2007           7
11 rows selected
SQL>

The year of low cost Windows 8.1 laptops?

Saw an asus 11.6 laptop in the weekly ad for $169. Would be good for people who need a laptop on the go. I think that these things may be a permanent offering thanks to low cost eMMC technology.

Seems to be so true of many software advances.
Especially some games. I have been playing Witcher 3 since about a week after it came out. And I have a number of other games I played in the past were the patches improved the quality.
Now the new patch 1.07 coming out is supposed to fix some things I have noticed and some things I have not liked about the game. I am thinking I am 60-70% done with the game but waiting a few months to buy or start playing it would have allowed me to be in on those updates from beginning.

Low-Cost data migration and ETL tools

Hi, Im building a database for my company. We are a rather small size book company with a lot of references and still growing.
We have a Mysql database here and are trying to find some good tools to use it at its best. Basically we are just starting up the database after dealing with Excel: we had a size problemu2026 So im trying to find a program that will allow us to do two different things: the migration of our data from the old system to the new one and a specialized software to perform ETL (Extract, transform and load) on our database.
About the price of the tools, if we were one year ago, the accounting department would have been pretty relaxed about this. But today, we have some budget restrictions and therefore need a low cost tool. So could you give me some advice on a good data migration and etl tool for a low cost?
Thanks for your help.

Hi,
Some companies have budget problems and are having to reduce their cost of operation.
Have you ever heard of open source tools? They can do the job easily and less expensive than proprietary solutions that cost a lot of money.
You can have a look at a good ETL open source program called Talend Open Studio: it is user-friendly but also has advanced features intended for technical users (java debugger, code injectionu2026). It can perform data migration and ETL as you wrote in your first post.
The website is [here|http://www.talend.com/solutions-data-integration/data-migration.php] to download the open source program. They have a forum and documentation you can read. Tell us what you think about the software.
For an ETL benchmark: [ETL Benchmark|http://blogs.sun.com/aja/entry/talend_s_new_data_processing]

Recmd for low cost, multi point temp logging

Can someone recommend the best, low cost way to monitor temp at 16
pts. We are doing qualifiation tests of an oven used in an bio tech
research application. But we are a startup and I need to stretch my
capital budget as much as possible. Here are the details:
1. type k theromocouople
2. 40-150F temp range
3. 16 tc input channels
4. scan rate = 1 reading / minute
5. log period = 60 hrs
I used National Instruments Field Point modules about 2 yrs ago for
this since they were the cheapest approach I found for the signal
condtioning since a 8 channels of type K tc inputs, the TC120 module,
cost $350.
Is there a better approach I should look at? I do not have to work
with LV or NI hw if there is a better approach.
Thanks in adv
ance for your advice,
Doug Danielson
[email protected]
Atlanta, GA
recmd for low cost, multi point temp logging

On 18 Jul 2003 14:59:07 -0700, [email protected] (William
Danielson) wrote:
>Can someone recommend the best, low cost way to monitor temp at 16
>pts. We are doing qualifiation tests of an oven used in an bio tech
>research application. But we are a startup and I need to stretch my
>capital budget as much as possible. Here are the details:
>
>1. type k theromocouople
>2. 40-150F temp range
>3. 16 tc input channels
>4. scan rate = 1 reading / minute
>5. log period = 60 hrs
>
>I used National Instruments Field Point modules about 2 yrs ago for
>this since they were the cheapest approach I found for the signal
>condtioning since a 8 channels of type K tc inputs, the TC120 module,
>cost $350.
>
>Is there a better approach I should look at? I do not have to
work
>with LV or NI hw if there is a better approach.
>
>Thanks in advance for your advice,
>
>Doug Danielson
>
>[email protected]
>Atlanta, GA
>
>
>recmd for low cost, multi point temp logging
I don't remember where I got them from but I had a similar project a
few years ago and found that thermistors are a lot cheaper (and
slightly less accurate) than thermocouples. get an AtoD card for a pc
and you are pretty much in buisness. You'll need some resistors too
for voltage dividers. You need to watch what voltage you put across
them so you don't get significant internal heating. The suppliers
have the schematics and other usefull info. Thermistors don't give
you a linear reaction, so you need to use a table, graph, or an
emperical equation get actual temps. You will also want to calibrate
all of them as there will be some variance between sensors (even if
they were perfect the resistors you use along with them will vary)
rather than try to get them all dead nuts on with li
ttle trimpots just
figure a fudge factor for each sensor for when you calculate back the
actual temps. I'd try them all in ice water and boiling water, just
seal them in plastidip or something.before immersing them.
David

Any Acrobat Reader 'free' / low cost plug-ins available?

Dear All,
I posted a week or so ago regarding using VB and Acrobat Reader. What I want to do is open a pdf in VB, navigate through the pdf then save the current page no. in VB. A sort of index builder.
I realise from the excellent comments / help I received that since this is aimed at Acrobat Reader the only way forward is a plug-in. Thus I thought I would investigate this route. I've been stopped in my tracks rather quickly after looking at the plug-in licence rates.
So, my question - Do 'general functionality' low cost plug-ins exist for Adobe Reader to help me solve my project?
Regards,
Albert.

Dear Michael,
What I'm trying to achieve is this;
Allow the user to load any pdf file they wish, browse the pdf and when they find they relevant section (defined by pdf page no.) allow them to 'index' this by storing the documents path/name and current page no. via VB. Its a sort of index but controlled by a VB program.
It appears I can do it with a plug-in but the project is only very small and does not have a budget to buy the plug-in yearly licence. The other way around this is to do it via VB and use a VB compliant pdf library, I was hoping to just use the functionality in the Acrobat Reader but it appears to have little in the way of what I need. It can load/browse the pdf but seems to have no acessible function to extract the page no. the user is current looking at.
Any thoughts are much appreciated.
Regards,
Albert.

Lower Cost P2 Media

Similar Messages

Maybe you are looking for