Lower RAM defect after upgrading to 10.4.4
I have an early model Aluminum Powerbook G4 (1Ghz) and now have the lower
ram slot problem. I do feel the problem potentially exists in all the Aluminum 15" models. It's quite amazing how many things have happens since getting this powerbook. First battery problems (recall), then screen problems (extended warranty offered-took awhile thought) and now this. Does anyone
know if the replacement logic boards being offered are any less prone to
give out? It would be a drag to pay and have it breakdown again (of course after
any warranty period).
I'm beginning to think this is a software problem related to Tiger. It seem to me, nearly everyone with this issue experienced this "lower slot" problem when upgrading to 10.4x.
I am still on Panther 10.3.9, and I recently upgraded my lower slot memory, taking out the stock 256MB module, and putting in a 512MB one. It's early days, but it's working fine, and system profiler is recognizing the new 512MB RAM in the lower slot.
You actually had the lower slot stop working, AFTER you upgraded to 10.4.4.? Sounds like I could be onto something! Are you listening Apple!!
The problem seems to be worse in the newer machines (1.67 and the newer hi res models), but now it seems, that anyone with an Aluminium 15" Powerbook can get the problem.
I heard of one guy having 4 different logic boards in his Powerbook, so it doesn't seem to me to be the solution to the problem! Until Apple actually find the proper cause, and fix it, I certainly won't be upgrading to 10.4, just to be on the safe side.
15", G4, 1.25Ghz Alum Powerbook Mac OS X (10.3.9) 768MB RAM
Similar Messages
-
I am experiencing low battery backup after upgrade to OS X Mavericks
i am experiencing low battery backup after upgrade to OS X Mavericks
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
Low RAM space after Yosemite update...
My mac has been experiencing low RAM space after the Yosemite update... I have a MacBook pro retina display 13" with an 8GB RAM. I also have RAM cleaning softwares but they don't seem to help much... How do I solve this?
Decreasing RAM space doesn't tell you much because of the way OS X is supposed to work (using nearly all available RAM).
Does your Mac slow down significantly?
Review this:
How to use Activity Monitor - Apple Support
and this:
http://www.switchingtomac.com/tutorials/osx/understanding-memory-pressure-in-os- x-mavericks/ -
Low cell signal After upgrade to IOS 5.1.1 to my iphone 4
After upgrading my iphone 4 to IOS 5.1.1 ,my cell signal becomes very low and after some time it shows no service.
Do you know if your "Cell Network Search" under "Location Services" is on or off. I have been struggling with the same issue, on and off and this is one of the settings I have changed recently.
-
Blurred low res images after upgrade, no export, READ DON'T UPGRADE
Hello, I am Pro photographer, I mainly have used iPhoto for family stuff. After upgrading from 09 to 11 ALL my images seem to be blured as if they were only the reference thumbnail. Trying to export the images to my Desktop to see what is going on iPhoto just hang and then crashes.
I've just lost nearly 10 years of family pictures? come on Apple this is like a early Alpha.I have now upgraded three different machine with different iPhoto databases and have not had any issue with the clarity of the photos. I suspect that something happened to your photos during the conversion process.
I suggest you go back to your original iPhoto library and do a new conversion with iPhoto '11 to see if you get a better result as no one else has reported this issue. -
Upgrade RAM before/after upgrading to Leopard
I am new to Mac and I recently bought a Intel iMac running Tiger. I have the standard 1GB RAM that came with the computer but I plan to upgrade to 4GB RAM. Should I upgrade my RAM before or after I upgrade to Leopard?
I did it after the upgrade and it worked fine. Just make sure you buy your memory as a matched set.
-
Battery running low much faster after upgrade
Ever since I upgraded the software, my battery life has seriously degraded. Is anyone else experiencing the same issue? And is there a solution? I've already turned off location services - which is upsetting because prior to the upgrade, I had it turned on and my battery did not run low this quickly.
Perhaps these suggestions will help:
http://www.apple.com/batteries/iphone.html
also
http://theweek.com/article/index/250098/ios-7-battery-life-6-simple-ways-to-keep -your-iphone-powered-up
http://www.tuaw.com/2013/09/18/how-to-stop-ios-7-from-destroying-your-iphones-ba ttery-life/
Regards. -
Disappearing RAM problem after upgrade
I upgraded the RAM on my G5 dual 2.3ghz - i put in a pair of 1GB DDR SDRAM - They are recognised but the two SDRAMS that the machine shipped with, are now not recognised.
I want to try and reboot in Open Firmware mode or Zap PRAM , but as I have an Apple bluetooth keyboard, it doesn't seem to recognise the key combinations on reboot!
any thoughts?Hello Tyrone,
if you are using VMware version 4.x, LACp is not supported.
Yo need configure N5K-ESX Port-Channels wit "channel-group X mode on" and also configuring the correct load-balance method on both, Nexus 55XX and ESX host.
The problem is correct on VMware 5.X.
See the following links:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004048
http://longwhiteclouds.com/2012/04/10/etherchannel-and-ip-hash-or-load-based-teaming/
I have configured and working.
I hope the information was usefull to you.
Regards. -
Low battery life after upgrade to iOS 4.3.1
Last weekI upgraded my iphone 4 32GB GSM to iOS 4.3.1 and noticed a huge difference in battery life. Now I hav to charge my battery 3 times in a day. Iam not a huge user and make normal calls,SMS and maybe 15mins of games in a day. Can someone tell me how to fix this other than switching off 3G, switching off push notifications etc which I hav already done without any success.
Some suggestions to helping battery life has been to reduce brightness and to turn off Ping in restrictions.
To provide feedback to Apple about your battery life issues, please visit the link below in hope Apple will increase battery life without hurting performance.
http://www.apple.com/feedback
HuskieN -
My ipod touch getting much slower after upgrade to ISO 5.1.1
my ipod touch getting much slower after upgrade to ISO 5.1.1
could it be downgrade? or how to solve this problem.....I checked settings-->general-->about-->diagnostics & usage --> diagoostics & usage data, finding that almost every time I use the ipod touch, it sufferred the low memory issue after upgrading to ISO 5.1.1
will ISO 6 help? or will it get the ipod slower even than ISO5.1.1.1? -
Fan in overdrive after upgrade to Lion
I have a Powerbook 2.53 Intel Core Duo with 4GB of Ram.
After upgrading to Lion the fan regulary go's in to overdrive. Checked the activity monitor, nothing weird going on.
Also, Lion regulary runs very slow, spinning ball.
I never had these problems before the upgrade.
Any ideas?Hmmm... the SMC reset usually fixes similar problems (no help to you).
Try running repair disk from yoru software install DVD.
Barry -
Kernel panics with attached Drobo after upgrade to 10.6.4
Hi all,
I have the original four-bay Drobo, attached to a Mac Pro via USB. The Drobo Dashboard reports that both it and the Drobo's firmware are up-to-date with the latest versions.
The Drobo worked happily for several months attached to the Mac Pro running OS 10.6.3 and lower. However, after upgrading to 10.6.4, the machine will sporadically (though consistently) kernel panic. I have determined that the problem is with the Drobo — if the Drobo is physically unattached, the machine does not kernel panic; once attached, it will kernel panic, often within 10 minutes.
Does anyone have any ideas how I can resolve this problem?
Thanks so much in advance.I have a DroboPro here, and I also started experiencing this problem when I upgraded to 10.6.4. When connected via iSCSI, my machine would panic within a day or two, and sometimes much quicker than that.
I tried working around the problem by switching the Drobo over to USB. While that did prevent the panics in the iSCSI kernel extension, I started seeing corruption in my video output after a couple of days, so I was still forced to reboot every other day to keep the machine usable.
Even with the Drobo disconnected, I still saw the video corruption problem, but after I uninstalled the Drobo Dashboard completely, the problem has gone away. Thankfully, I can still use the Drobo via USB even without that installed, but the performance is dramatically lower than what I got with iSCSI.
If anyone has a better solution, I would very much appreciate hearing about it! -
After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working
After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.
Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP. -
RAM using higher after upgrade OS X 10.9
RAM using higher after upgrade the OS X 10.9 in MacBook Pro 13 (2011).
Still its using atleast 4GB RAM normally after the startup...! then 2 -3 apps in use the it take more RAM 5.30Gb out of 8GB...!!
But Still Mac working Faster..
ThanksNow I'm testing... These all apps as same time... RAM using 7.98 Gb out of 8GB
But Mac Still FASTER>>>!!
Mail
Safari with 5 tabs
Firefox with 5tabs
Chrome with 5tabs
iTunes
iBooks
Maps
Calender
PhotoBooth
Preview
iMovie
iPhoto
Activity Monitor
uTorrent
Skype
Adobe Audition
Final Cut Pro
Awesome..!! -
HT3918 I upgraded to 16 mb of ram and after 10 minutes my computer freezes, and ideas?
I upgraded to 16 mb of ram and after 10 minutes my computer freezes, and ideas? I have an imac mid 2011 21 inch.
Cause and effect points to out-of-spec memory.
Run Apple Hardware Test. Run the extended tests.
Using Apple Hardware Test
http://support.apple.com/kb/HT1509
If it fails the memory tests, remove the memory and re-seat it. The sockets are very "tight". Run AHT again.
If it still fails, replace your original memory. If it works, you found the problem. Buy Mac memory from Crucial or OWC / MacSales.
Maybe you are looking for
-
Premiere Elements 11 Will not open
I had this same problem with paid version of Premiere Elements 10 for over a year and it never got fixed. Yesterday 2/20/13, the new Premiere Elements 11 Trial was downloaded with the help of a senior Adobe tech, along with Photoshop Elements 11 and
-
To search a record from the table by providing a search button in JSP page
Hi, My problem statement is: I have a jsp page which displays a table containing records. I have to provide a button called search and a condition in a textfield so that the record which matches the condition gets highlighted. Can anyone solve my pro
-
Exclude a table from time-based reduction
Hi, Iu2019d like to exclude a table from time-based reduction. How can I do this ? Is there any manual how to do customizing in TDMS ? Regards p121848
-
I have a HP Photosmart C6300 All-in-one series operating in a wireless Mac environment...I DO NOT print photos however my Black Photo ink is consumed in normal plain paper printing jobs as well as my regular Black ink...do I have to have a Black ink
-
Mac not reading downloaded flash update
my mac is not reading my latest version of adobe flash. when i go to a program that needs flash to run, it asks me to download again. why?? i have uninstalled and reinstalled the program. any suggestions