Lower Third changes brightness of image when played on TV

Hi, I'm a FCP novice editing my 1st short film. It's a documentary and I'm using the Lower Third effect in clips where I interviewed people. I noticed that when I play back the movie from DVD on my home TV, when the Lower Third bar goes away, the brightness of the rest of the image changes. Specifically, it gets darker. Is this normal? Is there something I should do to prevent it?
Unfortunately, I only have an LCD for monitoring during editing, so I don't know if this is a general CRT thing or if it's something weird about my TV. But I don't see this sudden change in brightness on the LCD monitor.

I noticed that when I play back the movie from DVD on my home TV, when the Lower Third bar goes away, the brightness of the rest of the image changes. Specifically, it gets darker. Is this normal? Is there something I should do to prevent it?< </div>
On many TV sets—not monitors, receivers—the video decoder creates luma error (technical term is distortion) from high chroma or high luma values.
Have ever heard a TV set buzz when a bright white or yellow super comes on? That's the luma bleeding over into the audio chassis. Similar distortion issue, one parameter influencing another. You need to check using scopes and not just rely on the safe filter.
bogiesan

Similar Messages

Bottom edge of border of lower third changes colour on render

Hi,
Adobe Pr Pro CS3 system
I am not at my machine so please forgive if I haven't got the exact terminology correct, but the essence of my query does not change.
I am doing some "lower thirds" (banners) in the titler for a DVD of a music concert. Basically I'm creating a rectanglar box filled with near-opacity black and adding text on top of this. The black rectanglar box has its left and right edges outside the screen area so are not relevant. However, I have added a coloured edge to the top of bottom of the "banner" (I think this is an outer stroke with size 3.0) The thing is, it looks fine on screen, but when the video is rendered, the lower edge of the box has changed colour. It was originally a yellow/gold (as the top still is) but the bottom is now a pinkier shade.
Any thoughts. I will try to add a screen cap shortly in case it helps.
Thanks in advance.
Daniel

The footage with lower third was rendered to a new AVI within Premiere and imported. The colour change then appears on whatever system is used to view it (even the new render on the timeline shows it), on screen, preview monitor, subsequent DVD burned from Encore, etc.
Thanks

Why can't I see the changes in my image when I move the sliders in LR's Develop Module

When I use the quick develop tools in the LR 5.3 Library module, I see the changes in the selected image. When I switch to the Develop Module, when I move the sliders for the different tools, nothing happens to my image. When I go back to the Library module, I see the changes, but not in the Develop Module. Why is this happening? I have a PC running Windows 7. I have 30 gigs of space on my C drive. I recently updated my LR to 5.3 and subscribed to CC. I uninstalled the LR program and reinstalled it from the cloud. Same problem.

Hello lakota85usa, the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac profile folder is hidden Mac OS X 10.7 and above], not in your version(10.6.8), see if the "Showing hidden files and folders on Mac OS X" in the next link is helpful: http://kb.mozillazine.org/Show_hidden_files_and_folders#Mac_OS_X
thank you

Videos only show the upper left-hand portion of the image when playing.

When I attempt to play a video in Firefox (23.0) on my Mac, all I can see is the upper left-hand fourth of the video image.
When I attempt to view the same video in Safari it works fine. The entire image is rendered.
Mac OS X 10.8.4

I have this problem too, but only on my MBP with retina display. When I move the Firefox window to the attached external (non-retina) display, the full video is visible. And moving the FF window back, 3/4 of the video disappear again...
* I run the latest version of the Adobe Flash plugin (11,8,800,94 )
* running FF in 'Safe Mode' doesn't solve the problem
* 'Use Hardware Acceleration when available' is not checked
* apparently there's no 'protected mode' for FF an Flash on OS X
A Firefox Reset is not an acceptable solution for me.
Any other hints how I could try to solve this problem?

Low resolution in psd paintbrush image when moved to CS3

We are putting together a yearbook and have made paint brush images with wet media brushes in psd and moved to indesign. When moved the appear very pixeled? Not sure why? Any help?

Moved?
Did you use file>place?
Bob

DVD freeze when play

Hi everybody
I was just informed that one of the DVD I made "freeze" and "jump" images when playing reaches about half.
On my decks it runs fine.
I prepared the DVD as I used to. They did not change their player.
I just changed the brand of DVD.
Could that be a reason ?
If not what could I check ?
If yes why is it so ?
Thanks in advance
Bernard

Thanks a lot David for this prompt answer
#3 Ask your client to try the DVD in another player
and see if the same problem at the same places
repeats itself.
I already did. I am awaiting their reply.
#4 Check to make sure the bit rate settings you made
for both the audio and video aren't too high. Use
AC3 (Dolby) audio whenever possible. Some players
have been known to choke on the data rate required by
AIF audio.
what would you consider as "too high" when you don't know which player is going ot be used .
I used target 4.5-max 7.5, 2passes MPEG2
#5 It could be something as simple as their DVD
Player needing a lens cleaning.
OK I will tell them but they have no trouble with other commercial DVDs
#6 Always test DVDs on multiple brands of players
before releasing them to your client.
This is what I did and I had no problem
-DH

Using a lower third video file

I have been putting lower thirds on my video without any trouble. My lower thirds have been jpeg images. I simple drag them onto the timeline and they lay right over my main video.
My trouble now is, I've just obtained an animated lower third that is not a picture file, but a movie file. When I lay it on the time line it doesn't lay on top of my main video, but rather blanks it out.
I tried the video merge option, but it leaves some moving black pixels around the lower third image.
How can I lay one video (my lower third video image) over my main video?
Thanks,
Matthew

Hi Matthew,
Sounds like the video doesn't have a transparent background.
What format is the file? It should be Uncompressed AVI to work well in Premiere Elements.
The video needs to have preserved the transparent Alpha channel.
We have many of these types of lower thirds and motion backgrounds at muvipix.com and I have created many of them myself.
Depending on what format the file is will tell us something that may help.

Rotating image when refreshed

Hi, I have a table with a background image inside one of the
cells, I would like to change this background image when the page
refreshes. i cant figure out how to do it!
It is here: www.morgansilva.com
THanks!

I should say that I would like text over the images, so I
want the rotating image to be the BACKGROUND of the cell. Hope that
helps explain it more.

How can I cause captions to be displayed in a slide show or when playing a DVD of an album?

I want to add captions to images and then cause them to be displayed along with the image when playing a slide show or DVD.

Do you using Premiere elements or Photoshop elements.
In Premiere elements , You can add title in each photo. Press " T" button displaying below the monitor window then edit the text in monitor display.
In Photoshop elemtns , Create a slide show. Select one side, then click the text in right side of the property panel and edit the text in monitor window, Repeat the same steps for all the slides.

Why is my whole video not playing when I add lower thirds

It's just playing the length of the lower thirds and that's 10 seconds!

There is no way to trouble shoot this problem without comp details or a screenshot. The only guess I can make is that your work area is set to 10 seconds. The other guess is that 10 seconds is the limit of your ram preview because of system resources.

Is it possible to change brightness in video play back?

Is it possible to change brightness in video play back, without having to go to settings?
If not, then who agrees this should be possible?
I’m sure most iphone users have the stock brightness setting set to low to save battery power, but it’s very irritating when you go to watch a video in bright lighting conditions and in order to see it properly you have to go back out and change it.
I am not computer programmer, but I’m sure it would be possible to have a slider (just like the volume) and could be introduced in a update.
I think it would improve the overall iphone experience just that little bit more.
What do you think?

All Help > System Info does is to report your system specifications so you can copy and paste them in the forums for troubleshooting purposes.
You can choose what to highlight and copy, but it does not change anything in your system like editing a configuration file would.

How can i stop itunes changing manually typed in genres when playing a track?

hi,
for a long time, itunes has been changing genre information that i typed in manually when playing a track, example giving "soundtrack" to "Filmmusik" or "rock" to "Rock" (i prefer lower case letters). until upgrading to itunes 11, it was able to edit the localizable.strings file and set the predefined genres to lowercase and "Filmmusik" to "soundtrack" and so on. now i had to install itunes 11 to run my new ipod, and the localizable.strings file looks quite different. it doesn't seem to be the file now where the necessary updates have to be done.
therefore, first question is if anyone can tell me where i can find the predefined genres and update them? then i will have a workaround at least.
actually, i would prefer to stop itunes changing track information in any case. i've spend more than a year to import all my cd's and used lots of time to have reliable track informations. i don't want the software to change my data without me committing any change. also, even worse, itunes updates the aac-file itself as well. i used to use the last updated information as a criteria in intelligent playlists, but itunes makes it impossible to get the expected result with its unwanted updates.
so, any help will be aprreciated. in case it should matter, i have an imac with os x 10.6.8. the problem seems to occur only in itunes, when i play the tracks on my ipod, the information remains unchanged. and since i read about similar problems with songs from the itunes store - all my tracks are imported from cd manually.
regards,
andi

Dependent upon which view you are using to look at the album, they will be playing in the "view" order. For example, in the screenshot below, in the Songs view, I have a view of an album like this, while the song "Follow Me" is playing:
Look carefully at the picture and you will notice that the sort order for this view is in "reverse Last Played order", and if you now look at the Track No. column, you will notice that "Follow Me" is track 12, the last one on the album. If you also look at the Up Next list, you can see every track from the album, in the same order as they appear in the main window, so it will play in reverse order.
To play this album in the correct track order, I simply click on the Track No. column header (so that the arrow is pointing up) and then select the track at the top of the list, track 1, "Sunset Song". Look at this screenshot:
Notice that now, the tracks in the Up Next list are in track order and the album will play in the correct order.

When playing a slide show there are many nonvisible photos. They appear as "image cannot be edited. The original is offline." Where is it and how can I get it back into my photo library?

How can I get all my images to show in my photo library? When playing a slide show some of my photos have a message "Image Cannot Be Edited. The original is offline."

What version of iPhoto?
Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How to Change Brightness, Contrast and Saturation of an image in LabWindows/CVI (Urgent) ?

Hi All
I want to change brightness, contrast and saturation of an image, plz help me how it will possibe in labwindows/cvi
Thanks

CVI does not include native functions to operate such changements on an image.
It may be possible that these functions are included in IMAQ library, but I never used ot so I'm not sure. In any case, this is an additional tool to install and it is not free.
Alternatively, you may need to search for a third party library that offers such functions.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to insert an image into lower third rectangle title?

I'm creating a new title for news videos for a local newspaper's website.
I've created a white lower third rectangle and I want an image of the newspapers logo to be inside of the white lower third rectangle.
I'm trying to drag the image into the title workspace but it wont allow me to do so......
How can I get this image of the newspapers logo inside of the white lower third rectangle?
Thanks,
Any help appreciated!
Jonathan.

Hi Dave,
Great advice! That's working fine.
But....my white lower third rectangle has a fill opacity of 88%. When I've inserted the newspaper's logo into this rectangle, obviously the logo (which is white with blue text) has an opacity of 100%. But when I lower the logo opacity to 88% I lose the logo's white, but also the actual text of the logo too which is a problem.
So I'm now thinking, is it possible to lower fill opacity from left to right in my rectangle? If so, this would allow the left hand side of my rectangle to stay at 100% fill opacity, which would match the white fill of the newspapers logo, and I could gradually reduce the opacity as the rectangle goes right, fading out towards the end.
Is it possible to use fill opacity in a left to right motion?
Thanks Again!

Lower Third changes brightness of image when played on TV

Similar Messages

Maybe you are looking for