Loyalty Types are not appearing

Hello ,
I am not getting Loyalty types in the drop down list while creating a loyalty Program in WEB UI Screen. Please let me know if I need to maintain any customization step for appearing the loyalty types in the drop down list while creation loyalty program.
Thanks in advance
Regards,
Krishna

Hi Krishna,
Did you check this customizing :
SPRO->Customer Relationship Management->Marketing->Loyalty Management - Design->Basic Settings->Define Loyalty Types
Check if you have entries maintained for loyalty programs category.
Hope this helps..
Cheers,
Sumit Mittal

Similar Messages

Pricing ZCondition Types are not appearing in Condition Record Maintanence

Hi All,
We have a requirement in SAP CRM Opportunity Management where the pricing determination should happen. So, to facilitate the requirement we have done the following
Downloaded the DNL_CUST_CNDALL and DNL_CUST_CND from ECC to CRM
But the Problem is when I am trying to maintain the Condition record in T-Code "/SAPCND/GCM" 　our Z-Condition types are not appearing in the list, also in Product Master Condition Tab.
Please suggest me how to resolve this issue.
Regards,
karthik J

Hi Karthik,
As a best practice -
1. If you are downloading the condition type and pricing procedure from ECC, then it is advisable to use ECC as a master system for all your Z condition type/condition record maintenance.
2. Similarly if you are using Pricing procedure as of ECC, then ensure that the downloaded pricing procedure in CRM is used for pricing procedure determination.
3. The condition record in T-Code "/SAPCND/GCM" is advisable to use if you are mainly using CRM Pricing.
By looking at your problem statement you are using ECC pricing procedure, condition types by downloading it to CRM.
If you have any other comments to make, please give the exact problem statement or any appropriate problem screenshot for further analysis.
Hope this will be useful
Thanks and Regards
DJ

Output type is not appearing in ME22N

Hi,
I have created some POs through sales order.i.e created a sales order and taken the PR from that.
Using ME59N, I have converted the PR to PO. The PO will have some output types attached (in the unprocesssed status).
The Output types (in the MESSAGES) are visible in ME23N. When I look into the PO in change mode ME22N, the output types are not appearing.... this is not the case with all the POs. Happening only for few POs.
Could you please suggest.
Ramana Malladi.

Hello,
Review your condition record values against the PO's that don't have an output type.
Could be something like purchasing group, material group, etc.
Regards
Waza

SRVR(Service Request) and SRVO(Service Order) are not appearing in IC_Agent

Dear friends,
We are planning to implement Service Requests and Service Orders in CRM 7.0 Interaction Center
The Service Transactions(Service Order/Service Request) are available in 'Service Professional' business role but not available in 'IC_AGENT' role.
The things i have observed
1. Without the channel the Transaction Type was not appearing in SAP GUI (CRMD_ORDER)
2. Even after maintaining the Channels the BUS2000223 (Service Request) did not appear in CRMD_ORDER but the SRVO- Service Order transaction type appeared.(BUS2000116 Service Process)
3. Have maintained the SRVO and SRVR transaction types as dependent transaction types in the 'Business Transaction Profile'; still when clieck on the Service Request or Service Order create I am getting the below error
'No transaction type is available for creating a transaction'
Below is the diagnosis
Diagnosis
No transaction type is available when creating a transaction. This can be due to the following reasons:
No transaction type is available according to Customizing
The user has no authorization for the transaction type
System Response
It is not possible to create the transaction.
Procedure
Make sure that:
The transaction type is set up in Customizing
The user has authorization for the transaction type
Can you please guide me where the actual issue is
Regards
Raj

Hi Raj,
As per your quarries and requirement please go through the link, it will help you in understandable way
http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C35_CRM701_BB_ConfigGuide_EN_XX.doc
Please reward points,
Cheers,
Sunil

In case of Factory sales, ECS values alone are not appearing

Hi friends,
In case of Factory sales, ECS values alone are not appearing in the sale order
and billing document even after maintaining excise rates in J1ID as 2% and condition
record as 100% for both JECS and JECX condition types, finally I checked with tax
code but still I am facing same problem. But same 2% values are appearing in J1IIN
screen.
Please help me out in solving this problem.
Thanks and regards,
Swamy H P

Dear Swamy
Ensure the following in your pricing procedure, for condition type JECS.
- The "From-To" step number should be the step number of JEX2.
- The Calculation Type should be 366
- For JEX2, Calculation Type 353 and Account Key EXD are maintained
thanks
G. Lakshmipathi

Smartform - Borders are not appeari when iam printing in DOTMATRIX Printer.

Hi,
I have Created a Smartform. When iam taking printout in Deskjet, borders & Line spacing
is comming Correctly. When i try to Print using the Dotmatrix borders & Lines are not
appearing.
Regards
Praveen

Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi.

VPRS cond type is not appearing after creating a sales order

Dear Friends,
I have copied pricing procedure from Std pric procedure i.e from RVAA01.
In Material master in Accounting 1the following things are maintained,
Valuation Class--7920 ( Finished products)
VC Sales Order Stock--7920 ( Finished products)
Pricing Control-V ( Moving average Price/Periodic unit price)
Standard Price--- Blank
Price Unit--1
Total stock--100
In Pricing procedure VPrS cond type is included and settings are as follow,
Statistics---Relevant
Subtotal-- B ( carry over value to KOMP-WAVWR (cost))
Requirement--4
Item Catg is TAN and in Business data it is relevant for Determine Cost.
Activated cost determination for item categ TAN
But when I am creating sales order VPRS cond type is not appearing.
Analysis is saying
The requirement 004 is assigned to this condition in the pricing procedure. This requirement was not met and so the condition was excluded from further processing.
Can anybody tell me where I am going wrong?
Regards,
Shrikant

Hi Friends,
Thanks for your reply as per your instruction I have maintained cond type and also in Pric procedure I removed 4 from Requirement column.
Now I am getting following error,
Diagnosis
This condition has not been determined using condition records. The amount or value should be determined from another data source. For cost (condition category 'G') it is read using conditions from the material valuation segment, for a cash discount condition it is read using conditions from the terms of payment table.
In this transaction an error occurs - the material valuation segment or the terms of payment table could not be read or a currency translation has failed.
System Response
The condition has been provided with the deactivated indicator 'X'.
Procedure
Refer to the messages in the status line of the condition overview screen.
Regards,
Shrikant

Statutory deductions are not appearing in the Remuneration statement

Hi Friends,
I have done all configurations to Indian Payroll including ESI, PF etc.,. To configure these deductions I have used SAP standard wage types. Everything is at the configuration level. But these are not appearing in HR form. Any customisation has to be done in addition to this. Can anybody help me in this regard.
Best Regards,
KP Gupta

Krishna,
I suggest that you check the window screen as well. Assuming you have developed the remuneration statement like most companies' pau slips, you would have created one window for Earnings and another for Deductions. You need to assign groups to each window. Double click anywhere inside the Deductions window and you will get a window listing the groups assigned to the window. Double-click on the group(s) listed in the window to check if the deduction you need is listed there.
Like Ram Manohar suggested, also check the deductions side of the cumulation ID.
Also, go through the standard Remuneration Statement for India IN01 that's provided to check your form.
Let me know what you find.
Vivek

Tax classification fields are not appeared in master data

Dear Experts,
I searched the forum about my issue but i did not get any solution.
I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
FYI
I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
EX:
AT MWST
DE MWST
But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
Note:Country of plant,company code and sales organizations is IN
Help me to view tax classification fields in Master data.
Thanks&Regards
Ravikumar.R

Then how system knows this customer is liable for JLST.
In customer master, under the Taxes tab, it would be like
Country::::Name:::::Tax Cat.::::Description::::Tax Classification
While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically. You just have to input tax classification as 1, 2 etc.,
Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
G. Lakshmipathi
ps: please spell the name correctly

Descriptions of Iphoto are not appearing in Front Row

I have several slideshows of photos in Iphoto. Those slideshow contains descriptions for certain photos.
When playing those slideshows via Front Row, the descriptions are not appearing.
Further, only the first track of music linked to those slideshows is playing and repeating its own, instead of going over to the 2nd and 3nd music partition.
Any idee how to solve those problems? Will Front row on the apple Tv or on the Mac mini show the same ?
Many thanks.

First of all many thanks for your help.
In Iphoto, below on the left of the window, when you select an album, you see the title, the date and hour, the Key word, the type and size of the selected photo in the album. Below that is the 'description' that you can enter. This description is displayed in Iphoto when playing the photo show. This description is also transferred to Idvd, what means that it is possible to burn a Dvd to be watched on your Tv. Synchronizing the same album with the Ipod transfers the photos but not the description. And, in my opinion, there is no way to do it. Exporting the album gives the possibility to select the title and the key-word of the photo, but not the description. I tried this out, and unfortunately it is not working (only the title is transferred). Exporting the same album to as Web Page gives the possibility to select the description for export.
As I am eventually interested in the acquisition of a Apple Tv or a Mac Mini as Media center, I tried on my Imac to use Front Row in order to be sure that the 'description' of my photos will show on Tv as it is the case via a Dvd.
And in fact, the 'description' is not taken into account by Front row.
I hope that this long story is clear enough and that somebody has a solution.
Thanks

CRT results are not appearing after successful payroll run

CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.

Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70.

Amount Rule Type field not appearing in settlement rule screen.

Hi Experts,
We developed a program which creates settlement rules automatically on uploading data from excel file.
We encountered the following error.
cursor field COBRB-BRTYP does not exist in the screen
In the Settlement rule screen, under distribution rules, the field amount rule type is not appearing.
We have 3 level WBS structure. For the 1 level WBS this field is not appearing. But this field is visible for below WBS.
Please help me..
Regards,
Praisty

Hi Balachandar,
As i said, we are using an excel sheet upload to create settlement rules for WBS elements.
While uploading we got this error. COBRB-BRTYP does not exist in the screen.
Now we need to check with abaper, why the program is checking that field in particular.
Any way, thanks for your prompt reply.
Regards,
Praisty

Tab Strips are not appearing correctly

Hi all,
We are using SAP Portal 7.3 and we are using Custom theme. The tabstrips are not appearing properly (half broken).
I have tried changing the properties "Background color of selected tab" , "Background color of non-selected tab" and others in theme editor but this is not solving my issue.
Any help would be highly appreciated.
Thanks
Harshmeet

Hey,
Thanks for the reply. PFA the screen shot
This is how it is appearing, somewhat broken and some space below the tabs.
Thanks
Harshmeet

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Loyalty Types are not appearing

Similar Messages

Maybe you are looking for