[LP 7.2] Tascam US-2400 detected as both Native and MCU + XT. Help.

I just purchased Logic Pro 7.2 last week and for whatever reason my Tascam Us-2400, which has the latest firmware and is set for Native (Send + AUX5) mode, is detected twice when I launch Logic Pro 7.2. LP sees it first as a US-2400 Native and then also as a Mackie Control Universal + 2 Extenders. With all of this overlap I am unable to use the US-2400 in Native Mode and have reverted to Logic/MCU mode for now and it works, but I lose some key functionality compared to Native Mode.
Has anyone else ever experienced this? I've seatched around and cannot find any additional information. Any help would be appreciated!
Regards,
Mark

Doh! Nevermind. Tascam PDF says to use SEND + AUX 5 to put the US-2400 in Native mode, but the latest/greatest info on the Tascam web site says to use SELECT + CHAN if using Logic 7.1 or later. Works perfect.

Similar Messages

Ipod shuffle is not detecting in both windows and itunes, its not charging as well

Suddently my IPOD stopped detecting in my PC, i have tried in another laptop with windows XP as well, but still it just blinks 3 times and goes off. Hence i am unable to charge or upload the songs into the ipod shuffle. It was working until 2 days back.
Can anyone please suggest a solution for this problem
I have tried by connecting to different USB ports as well.

Buttons are working fine, because when i switch on the ipod and plugged it in the charger, it shows first as green and then moving to orange (after 3 to 4 blinks) its goes off
And also i tried resetting the ipod as well (as per suggested for 2nd generation)
Today, i gave a try from my another machine \
* i switched off the ipod
* i plugged into the charger
* it blinks for 3 to 4 times and then goes off. with this plugging itself, i switched on the ipod
* i plugged out the cable from the machine and plugged it back immediately
* This time it is getting charged
* i allowed it to charge for 2 hours and plugged out and now i could see playing songs successfully
But the problem the same thing is not working in my personal laptop, it is with WIn 7 (whereas the machine which is working with is WIn XP)
Even i tried to see whether it is detecting in Itunes of my personal laptop, it is not getting detected and not getting charged also. So i uninstalled the itunes and tried again, but it still it is not getting detected in Personal laptop and not charging also.

DV7 - Error 03F0 - No Boot Device Detected - Passes both Memory and HDD Test

Hi there,
My DV7 will not boot up at all. When powered on, I see the HP loading screen briefly, then into "dos type" font saying "No Boot Device Detected - Error 03F0"
I have run both the memory test and hard drive test from the diagnostic menu and both come back ok.
A little more history on the Device/Problem;
2 months ago it was shutting itself off due to overheating - After a good cleaning, the temps cooled down enough that it was no longer shutting off.
I am currently in India, plugging directly into outlets (230v power) using an adapter. 10 days ago there was a small spark at the outlet leaving a very small spot on one of the prongs of the adapter. There was no power flicker, and it wasn't a surge, just almost like a bad connection sparking. This "spark" seemed to have killed my charger immediately. I used the battery until nearly dead, purchased a new charger, but when I returned and tried the new charger, it would not charge, nor power on. When plugged in, at this point, the power/charging light on the side was lit, but not on the front. I used a pin to open the CD drive, and the front light lit up, but it still would not power on.
I took it to a repair shop here in India, and they managed to get it so it would power on (not sure how), but that has only brought me to where I'm at right now with the Error. They said "It worked, and then we tested again and it didn't work and now it no work".
My current BIOS edition is F.46.
Essentially I'm wondering if I'm screwed - and if I'm not, then what can I do to trouble shoot/fix it?
P.S. Finding parts in India that are specific to my computer will be near impossible with the technology differences. Also, dealing with local techs is extremely difficult so I'll need to know
P.S.S. I just tried to power it on again to double check the accuracy of my post and it will not power on, nor can I get the CD drive open again....

Is the unit still in warranty?
Based on the description of the behavior, it does sound a hardware issue beyond the hard drive.
Was the AC adapter that was purchased an HP adapter? I know you said it is difficult to get the right parts in your area, but I want to confirm if it is an HP adapter or aftermarket.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to detect JRE with Javascript and without any help of class file

Please tell me how to detect JRE with using the Applet file. Is it possible to detect only through Javascript

It is possible to detect the Sun JRE using only Javascript without any class file.
However, it is rather complicated due to difficulties with Internet Explorer.
http://forum.java.sun.com/thread.jspa?threadID=5177843&tstart=15
http://www.pinlady.net/test/PluginDetect.htm

Tascam US-2400 with Mackie C4 and Logic

Anybody using Logic with Tascam US-2400 (USB) control surface and a Mackie Control C4 plugin controller (MIDI) at the same time?
Wonder if there would be a conflict using both, but seems like a nice Logic setup if it could work.

Typically, its not about if a piece of hardware works with LPX.. It's whether or not it works with 10.8.x and if the Devs have written drivers that are compatible with 10.8.x that really matters....
In the case of Tascam, sadly, they don't have a good track record of providing support for newer OS X versions and instead just "end of life' their older products....
You will see from the following thread that the problem caused by Tascam not providing updated drivers for Mountain Lion, affects other DAWs Like PT and not just Logic...
http://duc.avid.com/showthread.php?t=342253
As for the 2400 and ML 10.8.4 itself...
At the moment, there doesn't appear to be anything new forthcoming from Tascam.... and they are not being overly helpful in regards to the non compatibility issues of the 2400 and ML 10.8.4 because as far as they are concerned they have "end of life"d that model...... Contact Tascam to register your wishes for a ML 10.8.4 driver.. Maybe if enough users do so, they might have a change of heart.. but based on their past history, I wouldn't hold my breath.
A few users have reported that they got their 2400 working under ML 10.8.2 but when asked how, none have been forthcoming with any answers.. The majorityof 2400 owners have stated its basically a 'no go' in regards to things like Fader movement etc... even using HUI compatibility mode... under Mountain Lion and have either moved on to new hardware that is fully supported under 10.8.x or have rolled back to 10.6.8 and Logic Pro 9 or whatever other DAW they use that works under Snow Leopard.
Finally, Apple made a mistake including the 2400 as a 'supported' hardware in the info for LPX and ML.... (They just copied the list over from the one they used with LP9 and Snow Leopard) They have since suggested that they will be updating the list and the 2400 will be removed from that list as Tascam are seemingly not intending to update their drivers for it any further....

"A How-To" on the steps to FIX the Problem of NO Sound Card DETECTION with AUDIGY 2 and Win XP

Note#: When restarting the PC each time, shut off the main power switch on the Power Supply then back on.
Note#2: You will need the Windows XP CD WITH the SP2 on it or have the download SP2 Install file from MS on your PC. I have it on CD.
. Remove the sound Card
2. Use the Removal/Un-installation Procedures for the drivers in Knowledge Base Under Windows XP Step by step. Restart to get all the files deleted in the Creative folder if necessary.
Here is the (Solution ID#) for the Uninstallaion found in the Creative.com Knowledge Base: SID72 "How to uninstall Sound Blaster drivers and applications?"
Alternati'vely, Click on the Sound Blaster Picture Box under the Knowledge Base Main Search Page and the article should be in the resulting list.
3. Use the DCProSetup_.exe from http://files.trunetworks.com/utilities/
Use it carefully Selecting [Creative] then Check the box for Muntiple Cleaning Filters, and remove the Creative Audio Drivers by Clicking on Start.
4. Go into the Registry by Typing Regedit in the Start>Run.. Menu
Navigate and remove the Entry for CTCMSGo.exe, it is running in the back ground otherwise and i believe it interrupts the re-installation of MediaSource Files.
HKEY_CURRENT USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
The file link/tag, it will be on the right half of the screen, Delete it. CTCMSGo.exe=(Creative Technologies Media Source Go)
5. Restart the PC, dont forget to switch Power Supply to off while powered down and on before powering back up.
6.Go to the Win XP SP2 CD or the file downloaded, select re-install but choose UPDATE, not New Installation. Let the Install run and update your pc, this procedure has no data loss or settings changes in Windows.
7. Restart PC
8. Turn off PC and install the Audigy 2 Card. Then turn on the PC. At this point you might get a plxcore.plx Error of file missing. Not to worry.. copy the file from within the Creative Drivers CD and paste it into the Creative Folder In C:\Program Files\Creative
The Knowledge base Article on the steps is: SID287 "Error: Program could not load because Plxcore.plx cannot be found"
9. Power up and see if you get PCI Device, and Audio Controller Detetion. If you dont then do the following:
A) Remove the Sound Card and Re-install the Win XP SP2 Update a number of times ( I did this about 5 times until detection) Each time restart and install the Sound Card into any of the empty PCI Ports until detection.
If that does not work after a number of times try the following:
B)Power off and switch the PCI slot of the Sound Card (to all the PCI slots if necessary with complete power off each time) Without Re-installing XP SP2 Update.
0. After you get Detection, The Windows Auto Installer for Drivers will pop up..select Find Drivers Automatically, then Install then install the drivers it finds. It will put in some basic Audigy Drivers from the CD or online i'm not sure where it gets them from. Keep your Driver CD in the CD Dri've.
.Restart the PC, then install the Drivers and Media Source Files from the CD (it may not all get installed and may give an error and you have to shut down and re-install the drivers and Media Source over again and over again so it fills in the gap of missing files/drivers until it all works without deleting the previously installed parts).
2. Only install this update from the File/ Downloads Section on the Creative website: EAX4DRV_AUDIGY2__84_50.exe Dated 29 July 04. The new beta one that was released is what started all my troubles, so plz i urge you to wait for it to be official.. unless you really want to test it out at your risk.
And there you have it.. in 8 Hours and some ideas from friends and relati'ves concerning detection problems of other hard ware they have had i decided to play Roulette all night and this combo works. I had to play Roulette switching the PCI slots (5 of them), and then towards the end play Roulette with the Creative Driver CD install... until they all work perfectly. WHEW!!!
Notice: I hope if you are really ticked off at having no sounds and want to try this at your own risk and responsiblity go ahead, and I wish you luck. None of the proedures are too out of the ordinary. I dont know if it will work for you but it worked for me and maybe it will possibly for other similar Sound Cards as well.. like ZS or Li've! etc. with similar problems. Happy Sound Blasting!!!
My Specs: P4 3.2Ghz Prescott on Intel D875PBZ MB, pqi GB PC3200 Dual Channel RAM, Win XP SP2, Plextor CD-R and DVD Dri'ves, BFG 6600GT OC 28MB and the Audigy 2 Sound CardMessage Edited by Flying_Ghost on 05-04-2005 09:38 PM

Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
Have fun

Ipod mini 2nd gen 1 gb: not detected by laptop (win 7 64 bit), if detected: error during autofill and cannot be restored, please help :D

My laptop does not detect my ipod mini (2nd gen 1 gb), when i connect it the orange light flashe 2 or 3 times then nothing happens. if ever that it will be detected by my laptop and when i sync music on it there will be an error and itunes will suggest to restore it to its factory setting and if i choose to restore it error 3194 happens. so my top priority of course is for it to be detected then fix the latter. please help any will be much appreciated

This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

My Ipod NANO cannot be detected by my PC and Itunes

Hi,
I've owned my ipod NANO for over a year now, a month ago it refused to start, it said "Very low battery power, please wait." for a while but i got that fixed, now i can charge the Ipod again and thats great but i cant put new songs on the Ipod anymore because my PC cant detect the Ipod, nor can Itunes.
I've tried alot of the things you can do but it doesnt work. Please help!
I got ITUNES 8.1, i had version 7 so i figured maybe updating could work but no.
This is what the ITUNES Diagnostic says:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
MEDIONPC MS-7091
iTunes 8.1.1.10
QuickTime 7.6
FairPlay 1.3.6
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.4.1.7
Apple Mobile Device Driver 1.29.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 286F98611BA87D07
Current user is an administrator.
The current local date and time is 2009-04-08 02:20:22.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce 6600 LE
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 8.1.1.10 is currently running.
iTunesHelper 8.1.1.10 is currently running.
Mobiel Apple apparaat service 2.12.36.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano running firmware version 1.3.1
Serial Number: YM6337Q1UPR
Also i might add that on my full green battery sign i see some sort of plug sign which ive never seen before, maybe thats because its at its maximum battery capacity right now?
But thats not all, when my Backlight dims, a big green battery sign appears with a plug on it. I cant recall ever seeing such a screen on my ipod, maybe this means something?
Message was edited by: mister PL

I wish I could help. I have seen this question so many places since the problem began for me that I can only assume that either Apple does not care about the problem or that, as I have begun to suspect, this is just a serpentine way to get people to buy a new one every year.
Well, sorry, I don't have that kind of cash. Not many people have it to spare right now, either. They can help me use the one I have or lose a customer. Because I don't have such a pressing need for iTunes without that iPod. And the online help didn't help. I'll be danged if I'm going to wipe every song off the iPod without knowing for certain that it will fix the problem and that I will be able to put them back! So it's just a fancy music box now, by the looks of it, isn't it? Whatever is on there already is all I get. So be it. I won't be buying another.
I hope they respond soon, but it looks bleak. There's an unholy number of unanswered questions on here, and none of the answered ones seem to have been addressed by Apple people.

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.

we have a same problem

My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

Place the device in DFU mode and restore.

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

When opening safari i get a message that says major security issue please contact apple immediately suspicious activity might have been detected. what is this and how do i get rid of it so i can use my internet?

when opening safari i get a message that says major security issue please contact apple immediately suspicious activity might have been detected. what is this and how do i get rid of it so i can use my internet?

A misleading and malicious popup. Launch Safari with the Shift key held down; if that doesn't work, temporarily disconnect the computer from the Internet.
(121307)

I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me

I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me and i am new to I pad

If it's not showing on the left-hand sidebar of your Mac's iTunes (if you are on iTunes 11 then you can enable the sidebar via option-command-S) under Devices then see if this troubleshooting article helps : http://support.apple.com/kb/TS1591

Vold Manager never detects the cd rom and any other removable media

Hi,
I have installed solaris 10(i86pc i386 i86pc) on my PC through Oracle Virtual box but I am stucked in a problem that the vold manager never detects the cd rom and any other removable media devices. I have tried many documented methods but could not get solution to this problem. I also stopped the volume manager (vold) and tried to mount the cd rom manually but still could not mount the cd rom.
I don't know how to configure solaris in such a way that it could detect cd rom and any other removable media.
Any help in this regard will be highly appreciated.
Regards,
Anees

Is it an IDE or SCSI CD-ROM? Can you post back the output of the following command?
ls -l /dev/dsk/c*

My iphone is showing the apple pic so i Pressed both home and sleep/wake buttons until the Apple logo appears, then release the sleep/wake button and continue pressing the home button alone until iTunes detects and Recoveys but it is gives an error 1051

my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!

plug into itunes and take it from there
http://support.apple.com/kb/HT1808

[LP 7.2] Tascam US-2400 detected as both Native and MCU + XT. Help.

Similar Messages

Maybe you are looking for