Lp slowing down effect

Hi guys,
I want to recreate the LP slowing down effect, where tempo and pitch change at the same time, how do you do this on a prerecorded audio file?
thanks for your help!!!

you can always try Turntablist...it's a pretty cool effect
it's universal binary
http://destroyfx.smartelectronix.com/software/turntablist-au-1.1.0b7.dmg

Similar Messages

  • Slow down effect won't work...

    I recently upgraded to iMovie HD and when I try to use the slow down effect it renders it but it stays the same clip. Any suggestions on what is causing this?

    You're not alone.
    Unfortunately that's the only thing I can say and do for you...
    Numerous posts deals with this bug. We can state that it appears in those cases:
    - Ilife'05
    - MiniDV film importation
    This effect was so funny and usefull in previous versions of ilife.

  • Sound vanishes with slow down-effect

    When I use the slow down effect on a clip, the sound disappears. I have tried to extract the sound, but the problem remains. Is this supposed to happen with this effect?
    Best regards
    P. Svensson

    To simplify the question: Has anyone manage to keep the sound after using this effect?

  • "Slow down" effect - how do I

    This is what I'm after...
    Best example is Alice Coopers "Schools Out" tune. A the end of the song it slows down as if somebody unplugged the record player. Nirvana also used it. Is there a way to approximate that effect in Logic Studio?
    -Toastieo

    Toastieo wrote:
    Okay, I'm a little lost as how to use this plug-in. I have the .dmg file on my desktop. What do I do now?
    -Toastieo
    OK, so double click on the DMG, which opens a virtual disk. Inside that take the file that is called 'dfx turntablist.component,' and drag it into your components folder found here: HD/Library/Audio/Plug-Ins/Components.
    Once that file is in the proper folder, open a new project in Logic. Create an Instrument Track, and click on the input of that track (where you'd select an instrument). Under AU Instruments at the bottom of the list, you'll find Turntablist inside the Destroyer FX folder.
    Once that's open, you have to put the file you want to effect directly into the plug-in using the 'Open File' button at the top of the plug. If you click on the 'Help' question mark at the bottom it'll explain all of the features.
    If you want to record what you're doing, instead of just playing it, change the output of the Instrument Track to a bus, and the create an audio track and change the input of that audio track to the same bus. Then arm to record that audio track, hit record, and start messing with Turntablist. It will record whatever you're doing into that new track.
    Good Luck!!

  • Slow down effect with Nokia 2730C after update.

    Hello everyone. I have a Nokia 2730 Classic. I bought this phone on april with version 7.70. A week ago, I updated my phone via USB to version 10.45. After update, I have some problems, that annoys me. First (and most important) problem is when I turn on my music player, my phone freezes down for about 2 seconds, then, I want to turn next song and when I press the "next song" button, everything freezes down for 5 seconds and just then the next song plays. Especially, when I play games. This never have been before this update! Second, I missed the "screensaver change" function, like most of people, who have this phone. At last, I need to change my BIG phone clock and icons, to smaller. Can I do that?

    Have you tried reinstalling? Restore to factory first before reinstalling.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Tape slow down effect

    Ok I know this has probably been asked a lot before, but is there a tape slowdown effect in Logic Pro8 anywhere? The kind of thing I used to do by grabbing the take-up reel ?
    Thanks

    Sam FB wrote:
    Ok I know this has probably been asked a lot before, but is there a tape slowdown effect in Logic Pro8 anywhere? The kind of thing I used to do by grabbing the take-up reel ?
    Thanks
    i personally love and use the free plug-n Turntablist. google Destroy FX Turntablist...it's a lot more versatile then a pitch wheel IMO. works great in L8.

  • Is there a way to disable the slow animation effect when holding down the shift key?

    Holding down shift at the same time with a shortcut (for example like Control + arrow for Mission Controll) makes the animation run with a slow motion effect. I would like to disable this setting as this collides with other keyboard shortcuts for some apps I've been using. I can't find this option in the keyboard section of the Preferences pane, and using the command 'defaults write com.apple.finder FXEnableSlowAnimation -bool NO' in the terminal doesn't work either. Is there a way to do this?

    I tried the terminal command as well and didn't get it to work. Does anyknow how to do this now? I'm in ML.

  • How to slow sound effect down (stretch out)?

    I exported a clip from final cut pro. Now I want to slow down the "whoosh" sound effect so it fits my piece correctly but I can't figure out how. When I select the layer everything is greyed out pretty much from the menu options at the top of the screen?
    Thanks!

    Time Stretch under the Process menu. I think it only works in the wave editing window, so for a multitrack thing you'll need to double click the file and open it in that editor.

  • Internet filter that won't slow down After Effects

    Hey there, does anyone run an internet filter (e.g., K9, Squid Guard, Intego Family Protector) while using After Effects and After Effects runs smoothly? I am unable to have an internet filter running while using After Effects. Slows After Effects down greatly and Media Encoder won't respond correctly. Any help would appreciated. Thanks. See below for what I am operating:
    Mac OS X 10.8.5
    CC After Effects, latest update.
    16 GB ram

    If configured no firewall or scanner should ever interefere with normal operations on your system. If that's not possible, then all tools are crap. Otherwise you might want to spend some time checking the logs and figuring out if and when they are actualyl blocking stuff and establish suitable exclusion rules for AE.
    Mylenium

  • Why does my footage Slow down and loose audio when imported to after effects cs6?

    Whenever I import video of any kind into after effects, it slows down and looses audio. It happens for every video. The weird thing is, it seems like it doesnt happen to anyone else on the internet. CAN SOMEONE PLEASE HELP ME PLEASE!!!! I am about to cry. I cant do anything with this stupid software! If there is a solution please tell me. Its really annoying.
    extra info-
    On Mac
    mov. Files
    H.264 codec

    Slows down when? When you preview? Do you know how to preview?
    If you are pressing the space bar to preview the video then the behavior you are seeing is normal. AE will not playback in real time with autio unless you do a ram preview (look it up). You must learn to use the software.
    Start with the three videos on this page: Basic Workflow
    Or check out these resources: AE Basics

  • Slowing down clip has a strobing effect(choppy)? How can I smooth it out?

    Hi guys,
    When I slow down the clip, it plays back choppy or with a strobing effect.
    How can I smooth it out in FCP5?
    Anyone please,
    Many thanks in advance,
    Zia

    Zia,
    I would double check that the 'frame blending' option is selected. Otherwise, is the original footage interlaced or progressive? If you shot progressive and only have 29.97 frames (or less) to work with, you might want to try a plug-in. If the frames do not exist, it will probably be difficult to get a really smooth look.
    Should you have shot at 30i (aka 60i), you can do some high tech stuff with a playback deck and your original tape- set the deck to progressive and the 60 fields will be tranformed into 60 frames (per second), hence giving a slow motion feel that rivals that of film. (this depends on your original media and what deck you can get your hands on)
    I just did this for a music video and even the best DPs that I know thought it was film.
    G5 Dual 2.0 4gigs RAM Mac OS X (10.4) FCP 5.0

  • Internet speeds keep slowing down to a crawl

    I'm having a problem that has only developed in the past week which was during a time when I haven't changed any configurations in that period of time since my son was born a week ago yesterday and I obviously had more important things to do than mess with my network configurations. However, about 2 weeks prior to his birth, in the process of configuring a baby monitoring system with icam source, 3 weeks or so ago, I read that I might be able to improve my internet performance, I ran googles namebench a couple of times and added and re-ordered the DNS servers that had been listed prior to any problems developing based on its' reports. My internet speeds improved as a result of changing those DNS settings and stayed good until the past week. But of course, we now need to use the computer as part of our baby monitoring system and it's not working worth a **** and I'm getting frustrated since I can't put my finger on the problem and I don't really have time to spin around in circles right now. I'm sure it's probably something simple and I can't put my finger on it though. Sleep deprivation is new to me.......
    I've kept running log of notes so this is a little deshoveled but I figured the more information I provide the better the chance someone might help me get this solved quickly.
    In the last week, since my sons birth, my internet speeds would be okay after restarts and resetting everything, 2.5 Mbps or so but after a 10-15 minutes it starts to slow down to .2-.3 Mbps. I went thru all my network settings, restarted everything, repaired permissions, I've changed ethernet cables reset PRAM, firewall is running, stealth mode enabled, allow signed software incoming connections and my various other programs such as netsessionmac4f3c6b, skype, java, itunes, etc.
    All sharing services off and pretty basic login items at startup including growl.
    I had AT&T come out and check my DSL line and everything checked out on their end up to and out of the DSL modem based in their equipment tests.
    The problem seems to start when I connect my imac (a fairly loaded 27" imac I got in Dec.) First off, as soon as the imac is connected to the modem via ethernet, the old ethernet modem flashes and continues to flash, even right after startup. So the tech thought something was running in the background and I can't figure out what. I looked through login items but don't see anything that would be a problem and am afraid to eliminate everything.
    So I created a guest account to eliminate any login items (I think) and in I got 5.69 Mbps right off the bat. But after a minute or two, without changing anything my download speed slows down and I get for example .77 Mbps. The same thing happens with my administrator account on the imac. Fast speeds at startup and more importantly if I change the configuration by switching between ethernet and airport, I get fast speeds right after changing the configuration but after a minute or two I am well below 1.0 Mbps. I've got several network configurations with automatic, airport and ethernet set up in different ways including a clean ethernet connection with the original DNS settings.
    I haven't set up an airport only account but that really isn't the way I want to hook up the computer that sits right next to the modem and runs my network. Restarting the old modem and direct connecting the computer to the modem results in the same thing happening.
    I connected my ethernet from the (old?) modem directly to my ancient powerbook G4 and I got +5.6 Mbps download but it also slowed down to 300 kbps after 5 minutes or so the first time (old modem?)
    Now to explain why I have "old?" listed above. I was then able to get a new DSL modem from AT&T, hook it up just fine, get enormously faster internet service in the 5,000 kbps only to have it slow back down to around 300 kpbs after connected for several minutes.
    directly connected to imac-bypassing router
    3,500 kbps
    after 15 minutes-250 kbps
    connected to imac thru router/time capsule with airport extreme
    2500 kbps
    after 15 minutes=166 kbps
    directly connected to an older powerbook G4 with new modem
    IP address of 192.168.1.64
    5.65 Mbps on speedtest
    after 15 minutes=5.67 Mbps
    after 30 minutes= 5.59 Mbps
    1 hour-5.66 Mbps
    Very solid, stable readings for what I am used to. This would seem to isolate the problem to the imac.
    directly connected to imac with new modem
    IP address of 192.168.1.64
    5.8 Mbps on speedtest
    after 30 minutes= .60 Mbps-ping takes 250 ms
    1 hour= .46 Mbps-ping takes 250 ms
    Now a problem that only started last night after I hooked up the new modem and started up my old Time capsule/airport configuration, I got a message that said something to effect of "another device on this network is using computer IP address 192.168.1.64. So I tried manually changing last digit of the IP address on the computer to one number higher and it kept saying the start and end range were incorrect so I shut the airport station down since when it was connected, it would not allow the computer to connect thru the router via ethernet. I did a hard reset on the airport and I got it back up and running just fine but the internet speeds on the imacs' ethernet connections are so slow it's practically worthless. I also checked to see what was connected to my airport on any given occasion, 2 iphones, 2 pads, another imac running upstairs and a newer powerbook running icam source that is supposed to be the baby monitor. Except for the laptop everything can use "802.11n" but the powerbook only connects via 802.11g so I have set the airport to that limiting setting.
    Any suggestions? Is there a way for me to log what is happening so I can report in more detail?

    First thing is to check if the wireless is on a sensible channel: HomeHub doesn't always make sensible choices.  Install inSSIDer on your laptop and see what other devices there are around and if there is any clash.  Also, try moving the HomeHub around a little, even quite small differences can make a big difference to wireless signals.
    You could run an ethernet cable from downstairs to upstairs.  Easy to do, but can be a bit unsightly.  If most of your devices are upstairs, you could use this cable to connect the modem to the HomeHub.  If you have devices both up and down, you may want to keep the HomeHub downstairs and add a switch upstairs.
    HomePlug may be suitable for you.  If you search Amazon for HomePlug you will see a couple of kits for just over £30.  Don't go for an 85Mbps one.  A 200Mbps such as the TP-link or D-Link should be much better than wireless, but not as good as a cable.
    Depending excatly how many devices you want to connect and where, you can pay more and have a builtin wireless at one end: http://www.amazon.co.uk/Devolo-1408-Wireless-N-HomePlug-Adapter/dp/B00472MMCQ/ref=sr_1_15?ie=UTF8&qi...  Or it may be best for you to use the basic devices and add an old wireless router in switch mode.

  • MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

         Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
          After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
         After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
         The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
         At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
         Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    Copy a line of text in this window to the Clipboard.
    Paste into the window of another application.
    Wait for the test to run. It usually takes a few minutes.
    Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */  /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n  "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n  [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n  ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • System Slows Down and Freezes a LOT - Memory?  Swap?  Hard Drive?  AV?

    I have a 2.4 GHz 24" dual core iMac (identifier: 7,1). It worked fine for a good while and lately I've been having problems that seem to be getting worse (sometimes it seems to get better, then worse again). I have 4 GB of memory and I'm waiting for more RAM to upgrade it to 6 GB, since I hear that's the max anyone's run successfully in this model.
    I've often had a number of programs running at once. Usually I have Firefox, Apple Mail, the KDE's Konsole and Kate (from MacPorts), Calendar, Stickies, MacIago, and Pysol running. (Yes, it helps to have a few games up for breaks when I'm working.) I know that's a lot, but for well over a year, I was working with that setup without problems, without getting stuck for long times with the pinwheel of death or anything like that.
    I'm not exactly sure when it started, but now I have times where I will do something and the program will freeze and I get the pinwheel of death. I wait and after 30-60 seconds I can do something, but sometimes I still get hesitations and a start-freeze&stop-go mode for a bit. Sometimes this freezes the whole computer for up to 30-60 seconds and I can't even check another space with Command-Arrow.
    I've been trying to backtrack to see if I could figure out what is causing this. Sometimes killing Firefox helps, so I switched to Chrome and watched for usage on Activity Monitor and Chrome uses FAR less CPU time. I have FlashBlock and AdBlocker Plus on Chrome (had it on Firefox, and before that, used NoScript for blocking). But I've seen this happen even without a browser open.
    I suspect this could be an issue with swap, since recently I was watching and saw spikes in disk usage around these times, but I'm not sure of the correlation yet. Sometimes it seems like whenever I switch to a different program, whenever I use a new feature, I have to wait (as if it's loading library code or something).
    Again, this is a recent issue.
    I've upgraded from 10.6.5 to 10.6.6, so I don't know if that could effect this.
    I've also started using the free version of Sophos Anti-Virus (which is apparently impossible to quit once it's running) and thought it might be doing scans.
    What's also puzzled me is seeing that, with 4 GB of memory, Activity Monitor continually shows 1 GB free, but still indicates 2 GB swap files. So is there a reason 25% of my RAM is not being used?
    I've also checked and found my drive to be heavily fragmented. I bought iDefrag, but it can't defrag it because there seem to be some bad blocks. Rather than mark them as bad every time it hits that spot, it just tells me it can't access that part of the drive.
    My guess is that OS X, for some reason, leaves a set amount of memory free to use for various reasons and that, due to fragmentation, what was once an easy task of accessing something in a swap file is now time-consuming.
    Is that on target? What else could be causing this problem? This is beginning to make my iMac unusable. If it's just swap file issues and defrag problems, I'm thinking of cloning my internal 320 GB drive to a 1 TB drive and replacing the original, then running iDefrag for good measure and continuing from there. (It seems like in OS X finding bad blocks is difficult, from what I've seen.)
    What can I do and does anyone have any idea what the problem is? I'll be glad to give more details if that helps, but I've tried to include as much as I can already.
    Thanks for any ideas or help.

    Considering how I've solved this, I'm pretty much shocked that nobody had any answers for this.
    I upgraded my drive from the standard 320 GB drive (which had about 79 GB free on it). I used Carbon Copy Clone to copy my system drive to a 1 TB drive, then swapped out the 320 GB for the 1 TB. When I booted it up and started working, I noticed it was back to the way things used to be: I could go from one program to another to another with NO problem at all. No pinwheels of death and I even added a few more more running programs and still had no issue.
    I have no idea why, but before, even when there was a 2 GB swap file, 1 GB (out of 4 GB) of RAM was always unused. I don't know if the OS looks at what it can access and figures read/write times and uses that to figure out how much memory it can effectively handle or what, but now I'm using almost all of my 4 GB of RAM and the swap file is smaller than it was.
    So upgrading to a larger drive made a HUGE difference. I'm willing to bet that defragging the old one would have made a difference as well, but there were problems with some files and iDefrag could not read them, which also makes me suspect that drive was on its last legs and close to failure. (That and bad sectors could also have slowed down swap, along with fragmentation issues.)
    The solution was a bigger drive, but I suspect defragging the old drive might have helped (if it weren't for possible bad blocks). I know deleting files from the old drive did not help too much.

  • Is there a way to speed up or slow down video clips in iMovie using the iPad?

    Is there a way to speed up or slow down video clips using iMovie on the iPad? I do not have an Apple computer...just the iPad.

    No.
    There are other apps that can to time shifting, or speed effects.
    iMovie cannot.

Maybe you are looking for