LP8 and Mackie C4 Pro "two thumbs up"...

Just wanted to share my VERY positive experience with Logic Pro 8 and my Mackie Control and Mackie C4 Pro. Both are working flawlessly with NO real effort on my part.
The setup:
MAudio USB Uno MIDI ---> Mackie Control (older style)
Motu Ultralite MIDI ---> Mackie C4 Pro
Connect the MIDI IN/OUT via OS X Midi Configuration.
Load LP8 - it finds control surfaces -- the only thing I need to do is pull the Mackie C4 Pro icon down below the Mackie Control so it is setup as a separate control group. And that is it!
The C4 Pro just works and works well, hit Chanel Strip button and I'm working with the parameters for the chanel strip, click on the Virtual Instrument knob on the C4 and I'm working with all the parameters of the VI -- all labeled to match the VI displayed on my monitor. Turning knobs is smooth and precise. For VI with many parameters it is easy to scroll thru the pages.
Real time recording of VI parameter changes is once again very smooth and precise.
If anyone is considering a C4 Pro for their VI's, it's integration with LP8 is flawless. I highly recommend it and a big thank you to Apple devs for making both my Mackie control surfaces work right out of the box.
Rob.

EDIT: oh man, i've just saw that the above post is from you too
hi rob!
take a look here: http://discussions.apple.com/thread.jspa?threadID=1166125
works like a charm
Message was edited by: Graf Zahl

Similar Messages

Adobe Audition 6 and Mackie MCU Pro Control Surface

I have recently opbtained a Mackie MCU Pro Control Surface, for use with Adobe Audition CS6. At first I used it with an HP i7 running Windows 8. It worked like a dream, doing everything that I expected of it. Now, I have plugged it to my Laptop, running Windows 7 Home Premium. Sadly it refuses to respond to any commands in either direction. The PC giives the two-note ackowledgment that the USB is comminucating. However, that's as far as it goes.
Audition on the laptop knows what's connected and all options offer the USB connected device correctly named. Whatever I do, there is no sign of the Mackie MCU Pro waking up. It just seems to sit there, probably thinking it's a 'fridge or a toaster.
Has anyone else used this combination and did it work OK? I'm sure I'm mssing something obvious and there's an 'enable' of some sort. Can anyone offer any thoughts?
Thabk you for your time and help.
Alan

I have completely reset the Laptop (Packard Bell Easynote) to factory defaults and reinstalled Audition from scratch. It is now exactly the same as that installed on the desktop, except that the Laptop is Windows 7 (64-bit Home Premium) and the Desktop is Windows 8.
I was hopeful that a fresh install of Audition CS6 would set the Mackie Control Surface off and running. Sadly, it is not the case.
So:
With precisely the same software (same source and same S/N) the Mackie worlks correctly with the Desktop but doesn't work at all with the laptop.
Just for the record, when plugging the USB from the Mackie to the laptop, it produces the usual two-tone acknowledgement that it is seeing something it recognises, but that is as far as it goes.
I'm now at a loss. Does anyone have any further thoughts?
Many thanks,
Alan

Connection problems between logic Pro X and Mackie MCU PRO

Hello, I need help.
I bought a mackie MCU control PRO and don´t work on my Logic Pro x. Does anyone know if I have to do something in the logic to configure? or should it automatically go?
Thanks for your help
This is my equipment list if you have any questions;
MAc Book Pro, Maverik IOX
Motu Ultralite
Mackie MCU PRO
Logic Pro X

Not enough information to help you.

Multiple USB inputs - Keyboard/Mouse, Novation Remote, and Mackie MUC Pro

Im running a Macbook Pro, 10.4 with Logic 8. I just got a Mackie Universal Controller Pro and also use a Novation Remote 49. Ive got an additional 20" screen, with the USB inputs as well.
Im trying to hook up:
- External keyboard and mouse
- Mackie Universal Control Pro
- Novation Remote
If I plug in the Mackie and the Novation directly to the laptop, everything works. Of course, this then doesnt allow me to plug in the keyboard/mouse as there are only 2 usb ports on the laptop.
Since Im using the external screen, I have the additional usb inputs on there. So, I plug either the mackie or the novation into one of the usb ports, and then the screen/aux cables into the other. Then I plug the other controller into the screen.
With this configuration - one of the controllers wont be recognized. I generally get a message about reassigning or not reassigning them as well.
Regardless of which I choose, the second controller wont come up. Using the midi preferences and controller parameters within Logic doesnt seem to do much either.
Whats the work around here? If I get a multi USB hub, will this fix it? Im wondering why daisy chaining these pieces doesnt allow the midi to be properly routed or recognized.
Hopefully this makes sense and someone has the solution! Thanks.

Hey - Thanks for the quick response.
'Why don't you leave the controllers connected directly to the computer, and connect your keyboard/mouse to the screen's USB ports?"
Problem is - there are only two USB ports on the compute. In order for the external displays USB port to work, it has to be plugged in to the computer via USB as well. I have the mouse plugged in to the qwerty keyboard, but they both need to be plugged in to a USB port somewhere regardless.
Am I missing something?
It seems like the problem is really trying to plug an external controller in to an apple displays USB port (so that could be a power issue, although the Mackie is self powered, or just general connectivity).
Based on the above, suggestions?

I have a 8500a officejet pro and have set up two computers wirelessly. Can I install a third USB?

I have a 8500a officejet pro and have set up two computers wirelessly. Can I install a third computer USB?

Yup, it should work just fine.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account?

I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account? I have been able to log into what appears to be three of the four iCloud accounts I have. Two of them seem to be remarkably similar, and one appears to be only for my MacBook.I think I know which one my iPhone is backing up to, as I successfully restored from a back-up last week. The fourth iCloud account I can't access via password or security questions. Any advice would be much appreciated.
Thanks.
Cheers,
Aaron
Melbourne, Australia

You cannot merge accounts.

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same. Any ideas

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

I purchased Adobe Acrobat X Pro two days ago and cannot receive my serial number; your form will not allow me to select my State for address-I have spent four hours of frustration

Acrobat X Pro has a flawed serial number application form at the point where it asks for your State, the first time. I will not allow me
to complete the form and receive my Serial Number.@

I purchased it from my University bookstore and the attending clerk was no better informed than was I.
The form is required to be infilled in order to receive the serial number necessary for installation of the software
After five hours of trying, I was able to overcome the flaw in the form, as it appeared on the Acrobat website, and
complete the two pull-down menus indicating the State in which I live.
I called Adobe Customer Care for assistance and had to wait two hours for a return call, and by the time the
call came though I had found that the website form allowed me to pull-down for the State of location.
Adobe is an uncaring vendor, once it has your money in hand.

HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry

I need to record two camera interview shoots and turn the video around quickly. What is the best solution using a MacBook Pro and final cut pro?

I need to record two camera interview shoots and turn the video around quickly. What is the best solution using a MacBook Pro and final cut pro?

Try reimporting all your media: file>>import>>reimport>>continue

HT1420 I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit.

I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit. One iPhone and one iPad show in the authorization list. iTunes wants to delete my purchased programs and books from the iPad to continue synchronization. What can I do?

Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

I have two "MACs" and Final Cut Pro 7. I need a license to use this same software on both "Macs" How do I get it?

I have two "MACs" and Final Cut Pro 7.
I need a license to use this same software on both "Macs"
How do I get it?

You don't. You can install the same copy of FCP-7 on two macs (as long as you own both macs). You can't operate both copies at the same time.
MtD

I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.

I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.

You're both synchronizing Safari with iCloud while signed in with the same Apple ID. On one computer, sign out of iCloud in its preference pane and sign in with a different ID.

I have an iMac and a Mac Pro, the latter is used when I travel. Do I have to buy TWO Lion OS? THEY BOTH HAVE SNOW LEOPARD 15.6. Thanks

I have both an iMac and a Mac Pro using Snow Leopart 15.6 as an OS. Do Ihave to buy TWO Lion OS to upgrade my OS'?

No. Open the App Store on one computer running Snow Leopard. Purchase and download Lion. On the other computer open the App Store, log on using the same Apple ID, re-download Lion at no extra charge.
Alternatively, see Burning A Lion Boot Disc

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

Hello krosebear,
Thank you for using Apple Support Communities.
If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Regards,
Jeff D.

LP8 and Mackie C4 Pro "two thumbs up"...

Similar Messages

Maybe you are looking for