LP9 upgrade hangs while reading XSKey
I have Logic Pro 6 and I'm trying to upgrade to Logic Studio 2 (Logic Pro 9).
I have my blue Emagic XSKey dongle which works fine to launch and run LP6. The XSKey shows up under USB in the System Profiler. All looks fine.
However, when I run the upgrade, after I enter the new LS2 serial number, if the XSKey is not yet plugged in it goes to the screen asking for the old serial number or XSKey. When I plug it in and hit "OK" the installer hangs forever with a beach ball! (I once even waited for a very long time to see if anything happens) The Activity Monitor shows it as not responding.
If I have the XSKey plugged in in advance, it hangs even before going to the next screen.
*PLEASE HELP!!!*
If I take the XSKey out while hanging, it wakes up from the dead and shows me the message: *+"Your Logic XSKey is not eligible for this upgrade. Please refer to the upgrade requirements for details."+*
Again, this message did not show up while the XSKey was inserted, only when it was removed.
Some more detils: I'm using a G5 (new Intel MBP 15" will come soon to replace it).
Also, I bought Logic 6 with some University discount (still paid $700 for it!), but it doesn't seem like I got any Academic version - this looks like a regular release. I'm not even sure there was an Academic version at the time of Logic 6 (was there? And if yes, are Apple aware of the Emagic Academic XSKey serial numbers?)
Finally, after I bought Logic 6 I didn't use it until 2 years later. At that time there was no way for me to register Logic 6 with Apple as they didn't have a way to register Logic 6 and Emagic's registration no longer existed. I was told this shouldn't be a problem.
What troubles me is the fact that the installation completely hangs while the XSKey is plugged in. If I were really not legible for an upgrade I would expect to get this message right away with no hangs.
Any help here would be strongly appreciated. What causes it to hang and what should I do to fix this?
Thanks!
rafisaar wrote:
Thanks immo. Actually I failed to mention in my original post that I also already tried the XSKey updater and it didn't complain of any problem. It looked for an updated firmware online and returned saying there is no newer version. So that part looks fine as well.
Thanks David as well.
But does anybody know if there even was an Academic version at the time of Logic Pro 6?
I will try this again next week on the new Intel MBP 15" I'm going to get and then I'll know if the issue is because of the G5 or the XSKey. For sure I would expect it not to hang.
Thanks.
Logic Pro 6 - yes on the academic version, and as far as I know the dongles looked the same (dark blue)
Also, you do have the original serial number? You probably are better off using that instead of the XSKey.
Please DO call Apple on this, they do have the Emagic database of original owners, so if you had yours registered with Emagic when you bought it, it should be in the Apple system. Mine was, and I've been in since 4.8.1
Cheers
Similar Messages
-
Plugin hangs while reading an applet
Hi AIl,
I'm trying to read a wrl file in java3d and create a plugin for that,but the plugin hangs while reading the applet and the java console displays the following error message.
Please give some suggestions.
Java(TM) Plug-in: Version 1.3.1
Using JRE version 1.3.1 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\dk27
Proxy Configuration: no proxy
Warning: default mime table not found: D:\JDK13~1.1\lib\content-types.properties
security properties not found. using defaults.
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission modifyThreadGroup)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:272)
at java.security.AccessController.checkPermission(AccessController.java:399)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
at sun.applet.AppletSecurity.checkAccess(AppletSecurity.java:139)
at java.lang.ThreadGroup.checkAccess(ThreadGroup.java:279)
at java.lang.ThreadGroup.getParent(ThreadGroup.java:140)
at javax.media.j3d.MasterControl$23.run(MasterControl.java:3077)
at java.security.AccessController.doPrivileged(Native Method)
at javax.media.j3d.MasterControl.<clinit>(MasterControl.java:3070)
at javax.media.j3d.VirtualUniverse.<clinit>(VirtualUniverse.java:206)
at Vrml2.init(Vrml2.java:116)
at sun.applet.AppletPanel.run(AppletPanel.java:344)
at java.lang.Thread.run(Thread.java:484)Warning: default mime table not found: D:\JDK13~1.1\lib\content-types.properties
security properties not found. using defaults.This is just a warning message -- probably not the cause the problem.
java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied
(java.lang.RuntimePermission modifyThreadGroup)This is the problem....the way it looks ot me, you'll have to use something like policytool to add the following target names to the RunTime Permissions:
modifyThread
modifyThreadGroup
If you don't know how to do that, check out the Tutorial on Security or type policytool in the upper right corner of this page and click search.
Good Luck!
V.V. -
I am using a MacBook Pro. I have my movies stored on a Lacie 1 TB external USB harddrive. (42 Movies in HD - 538 Gb in use). When I try to read the LaCie external drive, my MacBook Pro is "hanging". Only a "hard reboot" helps to get my MacBook Pro up and running again. The MacBook Pro starts to read the drive, but half way he "stucks". I can read the LaCie drive without any problem om my windows machines, so the LaCie drive is O.K. Anyone familiar with this problem?
The drive is formatted NFTS, otherwise the drive can not handle large files under Windows. And yes, I can see the drive in Disk Utility.
I can even see the files (partly) untill my system is hanging.
Hans -
Weblogic 6.0 : Server hangs while reading a https request
Hi,
I'm running WLS6.0 on Win2000. The server hangs for some requests sent over https,
unless it times out. It seems that the server is not able to read the complete request
from the socket. It somehow thinks that there is more data available and keeps on
waiting. Is this a bug?
Also, it works fine if i change the url from a https to a http one. So, is this
related to SSL implementation of weblogic?
Has any of faced a similar problem? Thanks in advance for any ideas/thoughts on this
problem,
Thakur.
The stacktrace is as follows :
Full thread dump Classic VM (1.3.0-C, native threads):
"tavant.bus.PurgeStaleDataTask" (TID:0x10ce268, sys_thread_t:0x9e73fc0, state:CW,
native ID:0
x728) prio=5
at java.lang.Thread.sleep(Native Method)
at tavant.bus.HouseKeepingTask.run(HouseKeepingTask.java:63)
at java.lang.Thread.run(Thread.java:484)
"tavant.bus.MsgHistTask" (TID:0x10cd3a0, sys_thread_t:0x9e73de8, state:CW, native
ID:0x10c) p
rio=5
at java.lang.Thread.sleep(Native Method)
at tavant.bus.HouseKeepingTask.run(HouseKeepingTask.java:63)
at java.lang.Thread.run(Thread.java:484)
"tavant.bus.MsgNotificationTask" (TID:0x10cd158, sys_thread_t:0x9fbda70, state:CW,
native ID:
0x514) prio=5
at java.lang.Thread.sleep(Native Method)
at tavant.bus.HouseKeepingTask.run(HouseKeepingTask.java:63)
at java.lang.Thread.run(Thread.java:484)
"SSLListenThread" (TID:0xc68510, sys_thread_t:0x9dc3b20, state:R, native ID:0x408)
prio=5
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:276)
at java.net.ServerSocket.implAccept(ServerSocket.java:241)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLServerSocket.java:123)
at weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:114)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:244)
"ListenThread" (TID:0xc65ce0, sys_thread_t:0x9dc3960, state:R, native ID:0x2d8)
prio=5
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:276)
at java.net.ServerSocket.implAccept(ServerSocket.java:241)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:244)
"Application Manager Thread" (TID:0xfaf738, sys_thread_t:0x9dd07a8, state:CW,
native ID:0x5a4
) prio=5
at java.lang.Thread.sleep(Native Method)
at weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.run(Application
Manager.java:643)
"TimeEventGenerator" (TID:0xa68020, sys_thread_t:0x9070890, state:CW, native
ID:0x4e0) prio=5
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:259)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" (TID:0xa3e480, sys_thread_t:0x9071c10, state:CW, native
ID:0x138) prio=5
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:259)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" (TID:0xa37340, sys_thread_t:0x9050ba0, state:CW, native
ID:0x594) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.java:92)
at weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:109)
"ExecuteThread-14" (TID:0xa316e0, sys_thread_t:0x90502f0, state:CW, native ID:0x658)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-13" (TID:0xa317c0, sys_thread_t:0x9050180, state:CW, native ID:0x564)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-12" (TID:0xa315f0, sys_thread_t:0x9050010, state:R, native ID:0x52c)
prio=5
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:42)
at java.net.SocketInputStream.read(SocketInputStream.java:59)
at weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:130)
at weblogic.security.SSL.SSLSocket$WLPushbackInputStream.read(SSLSocket$WLPushbackInputStream.java:35)
at weblogic.security.Utils.inputByte(Utils.java:131)
at weblogic.security.SSL.ContentType.input(ContentType.java:50)
at weblogic.security.SSL.SSLCiphertext.input(SSLCiphertext.java:61)
at weblogic.security.SSL.SSLSocket.getRecord(SSLSocket.java:1002)
at weblogic.security.SSL.RecordInputStream.getData(RecordInputStream.java:109)
at weblogic.security.SSL.RecordInputStream.available(RecordInputStream.java:166)
at weblogic.servlet.internal.PostInputStream.available(PostInputStream.java:146)
at weblogic.servlet.internal.ServletInputStreamImpl.available(ServletInputStreamImpl.java:21)
at java.io.InputStreamReader.inReady(InputStreamReader.java:199)
at java.io.InputStreamReader.fill(InputStreamReader.java:171)
at java.io.InputStreamReader.read(InputStreamReader.java:249)
at java.io.BufferedReader.fill(BufferedReader.java:139)
at java.io.BufferedReader.read1(BufferedReader.java:187)
at java.io.BufferedReader.read(BufferedReader.java:261)
at weblogic.servlet.internal.ServletRequestImpl.mergePostParams(ServletRequestImpl.java:596)
at weblogic.servlet.internal.ServletRequestImpl.parseQueryParams(ServletRequestImpl.java:501)
at weblogic.servlet.internal.ServletRequestImpl.parseQueryParams(ServletRequestImpl.java:494)
at weblogic.servlet.internal.ServletRequestImpl.getParameterNames(ServletRequestImpl.java:649)
at tavant.web.URLGen.<init>(URLGen.java:51)
at tavant.web.MainServlet.processRequest(MainServlet.java:189)
at tavant.web.MainServlet.doPost(MainServlet.java:172)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:208)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1127)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1529)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread-11" (TID:0xa31520, sys_thread_t:0x9060b48, state:CW, native ID:0x718)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-10" (TID:0xa31500, sys_thread_t:0x90609d8, state:CW, native ID:0x768)
prio=5
at java.lang.Object.wait(Native Method)
at weblogic.common.internal.DynaQueue.getW(DynaQueue.java:228)
at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:246)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread-9" (TID:0xa31330, sys_thread_t:0x9060868, state:CW, native ID:0x460)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-8" (TID:0xa31170, sys_thread_t:0x90606f8, state:CW, native ID:0x3a8)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-7" (TID:0xa31250, sys_thread_t:0x9060588, state:CW, native ID:0x754)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-6" (TID:0xa31080, sys_thread_t:0x90604a0, state:CW, native ID:0x600)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-5" (TID:0xa30eb0, sys_thread_t:0x8fd1638, state:CW, native ID:0x500)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-4" (TID:0xa30f98, sys_thread_t:0x8fd14c8, state:CW, native ID:0x5b8)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-3" (TID:0xa30dc8, sys_thread_t:0x8fd1358, state:CW, native ID:0x4b4)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-2" (TID:0xa30c00, sys_thread_t:0x901f8c8, state:CW, native ID:0x798)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-1" (TID:0xa30ce0, sys_thread_t:0x901f758, state:CW, native ID:0x88)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-0" (TID:0xa308d0, sys_thread_t:0x901f670, state:CW, native ID:0x3a0)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" (TID:0x85a238, sys_thread_t:0x8fb5088, state:CW, native ID:0x744)
prio=10
at java.lang.Thread.sleep(Native Method)
at weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionManagerImpl.java:737)
at java.lang.Thread.run(Thread.java:484)
"Finalizer" (TID:0x7b0528, sys_thread_t:0x89fa088, state:CW, native ID:0x5c4)
prio=8
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" (TID:0x7b0300, sys_thread_t:0x89f6148, state:CW, native ID:0x690)
prio=10
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"Signal dispatcher" (TID:0x7b0330, sys_thread_t:0x89ef5f8, state:R, native ID:0x5ac)
prio=5
"main" (TID:0x7b01a0, sys_thread_t:0x235328, state:CW, native ID:0x788) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:498)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)
Monitor Cache Dump:
weblogic.kernel.ExecuteThread@A316E0/22C7E48: <unowned>
Waiting to be notified:
"ExecuteThread-14" (0x90502f0)
weblogic.kernel.ExecuteThread@A30CE0/22C5268: <unowned>
Waiting to be notified:
"ExecuteThread-1" (0x901f758)
weblogic.kernel.ExecuteThread@A308D0/22C4DD0: <unowned>
Waiting to be notified:
"ExecuteThread-0" (0x901f670)
weblogic.kernel.ExecuteThread@A30EB0/22C6028: <unowned>
Waiting to be notified:
"ExecuteThread-5" (0x8fd1638)
weblogic.kernel.ExecuteThread@A31080/22C6398: <unowned>
Waiting to be notified:
"ExecuteThread-6" (0x90604a0)
weblogic.kernel.ExecuteThread@A31250/22C6708: <unowned>
Waiting to be notified:
"ExecuteThread-7" (0x9060588)
java.io.InputStreamReader@FEAB90/3DD57C8: owner "ExecuteThread-12" (0x9050010)
1 entry
weblogic.kernel.ExecuteThread@A30C00/22C55D8: <unowned>
Waiting to be notified:
"ExecuteThread-2" (0x901f8c8)
java.net.PlainSocketImpl@FB1FE8/25A91C0: owner "SSLListenThread" (0x9dc3b20)
1 entry
weblogic.time.common.internal.TimeTable@A68270/22FF4B0: <unowned>
Waiting to be notified:
"TimeEventGenerator" (0x9070890)
weblogic.kernel.ExecuteThread@A317C0/22C7B38: <unowned>
Waiting to be notified:
"ExecuteThread-13" (0x9050180)
weblogic.time.common.internal.TimeTable@A3E730/22CDA60: <unowned>
Waiting to be notified:
"TimeEventGenerator" (0x9071c10)
java.net.PlainSocketImpl@FB1DD0/25A9110: owner "ListenThread" (0x9dc3960) 1 entry
weblogic.kernel.ExecuteThread@A30DC8/22C5948: <unowned>
Waiting to be notified:
"ExecuteThread-3" (0x8fd1358)
weblogic.kernel.ExecuteThread@A30F98/22C5CB8: <unowned>
Waiting to be notified:
"ExecuteThread-4" (0x8fd14c8)
weblogic.common.internal.DynaQueue@FB97F8/25AB878: <unowned>
Waiting to be notified:
"ExecuteThread-10" (0x90609d8)
weblogic.kernel.ExecuteThread@A31170/22C6A78: <unowned>
Waiting to be notified:
"ExecuteThread-8" (0x90606f8)
java.lang.ref.ReferenceQueue$Lock@7B0540/214CA40: <unowned>
Waiting to be notified:
"Finalizer" (0x89fa088)
weblogic.t3.srvr.T3Srvr@7C4C08/2185000: <unowned>
Waiting to be notified:
"main" (0x235328)
weblogic.kernel.ExecuteThread@A31520/22C74C8: <unowned>
Waiting to be notified:
"ExecuteThread-11" (0x9060b48)
weblogic.security.SpinnerThread@A37340/22CAB60: <unowned>
Waiting to be notified:
"SpinnerRandomSource" (0x9050ba0)
weblogic.servlet.internal.ServletInputStreamImpl@FEB090/3DD28C8: owner "ExecuteThread-12"
(0x9050010) 1 entry
weblogic.kernel.ExecuteThread@A31330/22C6DE8: <unowned>
Waiting to be notified:
"ExecuteThread-9" (0x9060868)
java.lang.ref.Reference$Lock@7B0310/214C560: <unowned>
Waiting to be notified:
"Reference Handler" (0x89f6148)
Registered Monitor Dump:
utf8 hash table: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class linking lock: <unowned>
System class loader lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Monitor cache lock: owner "Signal dispatcher" (0x89ef5f8) 1 entry
Thread queue lock: owner "Signal dispatcher" (0x89ef5f8) 1 entry
Monitor registry: owner "Signal dispatcher" (0x89ef5f8) 1 entryHi,
I'm running WLS6.0 on Win2000. The server hangs for some requests sent over https,
unless it times out. It seems that the server is not able to read the complete request
from the socket. It somehow thinks that there is more data available and keeps on
waiting. Is this a bug?
Also, it works fine if i change the url from a https to a http one. So, is this
related to SSL implementation of weblogic?
Has any of faced a similar problem? Thanks in advance for any ideas/thoughts on this
problem,
Thakur.
The stacktrace is as follows :
Full thread dump Classic VM (1.3.0-C, native threads):
"tavant.bus.PurgeStaleDataTask" (TID:0x10ce268, sys_thread_t:0x9e73fc0, state:CW,
native ID:0
x728) prio=5
at java.lang.Thread.sleep(Native Method)
at tavant.bus.HouseKeepingTask.run(HouseKeepingTask.java:63)
at java.lang.Thread.run(Thread.java:484)
"tavant.bus.MsgHistTask" (TID:0x10cd3a0, sys_thread_t:0x9e73de8, state:CW, native
ID:0x10c) p
rio=5
at java.lang.Thread.sleep(Native Method)
at tavant.bus.HouseKeepingTask.run(HouseKeepingTask.java:63)
at java.lang.Thread.run(Thread.java:484)
"tavant.bus.MsgNotificationTask" (TID:0x10cd158, sys_thread_t:0x9fbda70, state:CW,
native ID:
0x514) prio=5
at java.lang.Thread.sleep(Native Method)
at tavant.bus.HouseKeepingTask.run(HouseKeepingTask.java:63)
at java.lang.Thread.run(Thread.java:484)
"SSLListenThread" (TID:0xc68510, sys_thread_t:0x9dc3b20, state:R, native ID:0x408)
prio=5
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:276)
at java.net.ServerSocket.implAccept(ServerSocket.java:241)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLServerSocket.java:123)
at weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:114)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:244)
"ListenThread" (TID:0xc65ce0, sys_thread_t:0x9dc3960, state:R, native ID:0x2d8)
prio=5
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:276)
at java.net.ServerSocket.implAccept(ServerSocket.java:241)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:244)
"Application Manager Thread" (TID:0xfaf738, sys_thread_t:0x9dd07a8, state:CW,
native ID:0x5a4
) prio=5
at java.lang.Thread.sleep(Native Method)
at weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.run(Application
Manager.java:643)
"TimeEventGenerator" (TID:0xa68020, sys_thread_t:0x9070890, state:CW, native
ID:0x4e0) prio=5
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:259)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" (TID:0xa3e480, sys_thread_t:0x9071c10, state:CW, native
ID:0x138) prio=5
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:259)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" (TID:0xa37340, sys_thread_t:0x9050ba0, state:CW, native
ID:0x594) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.java:92)
at weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:109)
"ExecuteThread-14" (TID:0xa316e0, sys_thread_t:0x90502f0, state:CW, native ID:0x658)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-13" (TID:0xa317c0, sys_thread_t:0x9050180, state:CW, native ID:0x564)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-12" (TID:0xa315f0, sys_thread_t:0x9050010, state:R, native ID:0x52c)
prio=5
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:42)
at java.net.SocketInputStream.read(SocketInputStream.java:59)
at weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:130)
at weblogic.security.SSL.SSLSocket$WLPushbackInputStream.read(SSLSocket$WLPushbackInputStream.java:35)
at weblogic.security.Utils.inputByte(Utils.java:131)
at weblogic.security.SSL.ContentType.input(ContentType.java:50)
at weblogic.security.SSL.SSLCiphertext.input(SSLCiphertext.java:61)
at weblogic.security.SSL.SSLSocket.getRecord(SSLSocket.java:1002)
at weblogic.security.SSL.RecordInputStream.getData(RecordInputStream.java:109)
at weblogic.security.SSL.RecordInputStream.available(RecordInputStream.java:166)
at weblogic.servlet.internal.PostInputStream.available(PostInputStream.java:146)
at weblogic.servlet.internal.ServletInputStreamImpl.available(ServletInputStreamImpl.java:21)
at java.io.InputStreamReader.inReady(InputStreamReader.java:199)
at java.io.InputStreamReader.fill(InputStreamReader.java:171)
at java.io.InputStreamReader.read(InputStreamReader.java:249)
at java.io.BufferedReader.fill(BufferedReader.java:139)
at java.io.BufferedReader.read1(BufferedReader.java:187)
at java.io.BufferedReader.read(BufferedReader.java:261)
at weblogic.servlet.internal.ServletRequestImpl.mergePostParams(ServletRequestImpl.java:596)
at weblogic.servlet.internal.ServletRequestImpl.parseQueryParams(ServletRequestImpl.java:501)
at weblogic.servlet.internal.ServletRequestImpl.parseQueryParams(ServletRequestImpl.java:494)
at weblogic.servlet.internal.ServletRequestImpl.getParameterNames(ServletRequestImpl.java:649)
at tavant.web.URLGen.<init>(URLGen.java:51)
at tavant.web.MainServlet.processRequest(MainServlet.java:189)
at tavant.web.MainServlet.doPost(MainServlet.java:172)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:208)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1127)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1529)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread-11" (TID:0xa31520, sys_thread_t:0x9060b48, state:CW, native ID:0x718)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-10" (TID:0xa31500, sys_thread_t:0x90609d8, state:CW, native ID:0x768)
prio=5
at java.lang.Object.wait(Native Method)
at weblogic.common.internal.DynaQueue.getW(DynaQueue.java:228)
at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:246)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread-9" (TID:0xa31330, sys_thread_t:0x9060868, state:CW, native ID:0x460)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-8" (TID:0xa31170, sys_thread_t:0x90606f8, state:CW, native ID:0x3a8)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-7" (TID:0xa31250, sys_thread_t:0x9060588, state:CW, native ID:0x754)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-6" (TID:0xa31080, sys_thread_t:0x90604a0, state:CW, native ID:0x600)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-5" (TID:0xa30eb0, sys_thread_t:0x8fd1638, state:CW, native ID:0x500)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-4" (TID:0xa30f98, sys_thread_t:0x8fd14c8, state:CW, native ID:0x5b8)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-3" (TID:0xa30dc8, sys_thread_t:0x8fd1358, state:CW, native ID:0x4b4)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-2" (TID:0xa30c00, sys_thread_t:0x901f8c8, state:CW, native ID:0x798)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-1" (TID:0xa30ce0, sys_thread_t:0x901f758, state:CW, native ID:0x88)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread-0" (TID:0xa308d0, sys_thread_t:0x901f670, state:CW, native ID:0x3a0)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" (TID:0x85a238, sys_thread_t:0x8fb5088, state:CW, native ID:0x744)
prio=10
at java.lang.Thread.sleep(Native Method)
at weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionManagerImpl.java:737)
at java.lang.Thread.run(Thread.java:484)
"Finalizer" (TID:0x7b0528, sys_thread_t:0x89fa088, state:CW, native ID:0x5c4)
prio=8
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" (TID:0x7b0300, sys_thread_t:0x89f6148, state:CW, native ID:0x690)
prio=10
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"Signal dispatcher" (TID:0x7b0330, sys_thread_t:0x89ef5f8, state:R, native ID:0x5ac)
prio=5
"main" (TID:0x7b01a0, sys_thread_t:0x235328, state:CW, native ID:0x788) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:498)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)
Monitor Cache Dump:
weblogic.kernel.ExecuteThread@A316E0/22C7E48: <unowned>
Waiting to be notified:
"ExecuteThread-14" (0x90502f0)
weblogic.kernel.ExecuteThread@A30CE0/22C5268: <unowned>
Waiting to be notified:
"ExecuteThread-1" (0x901f758)
weblogic.kernel.ExecuteThread@A308D0/22C4DD0: <unowned>
Waiting to be notified:
"ExecuteThread-0" (0x901f670)
weblogic.kernel.ExecuteThread@A30EB0/22C6028: <unowned>
Waiting to be notified:
"ExecuteThread-5" (0x8fd1638)
weblogic.kernel.ExecuteThread@A31080/22C6398: <unowned>
Waiting to be notified:
"ExecuteThread-6" (0x90604a0)
weblogic.kernel.ExecuteThread@A31250/22C6708: <unowned>
Waiting to be notified:
"ExecuteThread-7" (0x9060588)
java.io.InputStreamReader@FEAB90/3DD57C8: owner "ExecuteThread-12" (0x9050010)
1 entry
weblogic.kernel.ExecuteThread@A30C00/22C55D8: <unowned>
Waiting to be notified:
"ExecuteThread-2" (0x901f8c8)
java.net.PlainSocketImpl@FB1FE8/25A91C0: owner "SSLListenThread" (0x9dc3b20)
1 entry
weblogic.time.common.internal.TimeTable@A68270/22FF4B0: <unowned>
Waiting to be notified:
"TimeEventGenerator" (0x9070890)
weblogic.kernel.ExecuteThread@A317C0/22C7B38: <unowned>
Waiting to be notified:
"ExecuteThread-13" (0x9050180)
weblogic.time.common.internal.TimeTable@A3E730/22CDA60: <unowned>
Waiting to be notified:
"TimeEventGenerator" (0x9071c10)
java.net.PlainSocketImpl@FB1DD0/25A9110: owner "ListenThread" (0x9dc3960) 1 entry
weblogic.kernel.ExecuteThread@A30DC8/22C5948: <unowned>
Waiting to be notified:
"ExecuteThread-3" (0x8fd1358)
weblogic.kernel.ExecuteThread@A30F98/22C5CB8: <unowned>
Waiting to be notified:
"ExecuteThread-4" (0x8fd14c8)
weblogic.common.internal.DynaQueue@FB97F8/25AB878: <unowned>
Waiting to be notified:
"ExecuteThread-10" (0x90609d8)
weblogic.kernel.ExecuteThread@A31170/22C6A78: <unowned>
Waiting to be notified:
"ExecuteThread-8" (0x90606f8)
java.lang.ref.ReferenceQueue$Lock@7B0540/214CA40: <unowned>
Waiting to be notified:
"Finalizer" (0x89fa088)
weblogic.t3.srvr.T3Srvr@7C4C08/2185000: <unowned>
Waiting to be notified:
"main" (0x235328)
weblogic.kernel.ExecuteThread@A31520/22C74C8: <unowned>
Waiting to be notified:
"ExecuteThread-11" (0x9060b48)
weblogic.security.SpinnerThread@A37340/22CAB60: <unowned>
Waiting to be notified:
"SpinnerRandomSource" (0x9050ba0)
weblogic.servlet.internal.ServletInputStreamImpl@FEB090/3DD28C8: owner "ExecuteThread-12"
(0x9050010) 1 entry
weblogic.kernel.ExecuteThread@A31330/22C6DE8: <unowned>
Waiting to be notified:
"ExecuteThread-9" (0x9060868)
java.lang.ref.Reference$Lock@7B0310/214C560: <unowned>
Waiting to be notified:
"Reference Handler" (0x89f6148)
Registered Monitor Dump:
utf8 hash table: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class linking lock: <unowned>
System class loader lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Monitor cache lock: owner "Signal dispatcher" (0x89ef5f8) 1 entry
Thread queue lock: owner "Signal dispatcher" (0x89ef5f8) 1 entry
Monitor registry: owner "Signal dispatcher" (0x89ef5f8) 1 entry -
The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.
The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
Try disabling the computer's security software during the download and update. -
i have i phone 3gs, it hangs while operating also upgrade to latest iOS fails ............. please help
Your iphone has been hacked and was locked back to the rightful carrier when updated.
ONLY the carrier to which it is locked can legally/legitimately unlock an iphone.
Your "brother from New Dehli" hacked the iphone.
Hacked iphones cannot be discussed here. It also voids the warraanty. -
Problem description:
My Mac Pro is extremely slow after upgrading to Yosemite 10.10, even while reading my newspaper on PDF
This is my EtreCheck print
EtreCheck version: 2.0.11 (98)
Report generated 17. november 2014 kl. 10.49.28 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: one day 15:45:13
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (290.89 GB free)
Encrypted AES-XTS UnlockedConverting
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.torch.update.agent.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.5f1 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User Internet Plug-ins: ℹ️
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.10 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
Omnibar
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 207.99 GB
Destinations:
Elements [Local]
Total size: 1.00 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 207.99 GB X 3)
Top Processes by CPU: ℹ️
89% lsregister
3% WindowServer
1% mds
1% sysmond
0% mtmd
Top Processes by Memory: ℹ️
142 MB Preview
125 MB com.apple.WebKit.WebContent
125 MB Finder
86 MB ocspd
77 MB com.apple.WebKit.Plugin.64
Virtual Memory Information: ℹ️
335 MB Free RAM
1.63 GB Active RAM
1.32 GB Inactive RAM
776 MB Wired RAM
17.27 GB Page-ins
345 MB Page-outsCheck out this thread: https://discussions.apple.com/thread/6466590?start=0&tstart=0.
For many users, the Folder Action Dispatcher is the culprit that eats almost all available memory if it is enabled on ~/Library/LaunchAgents. -
LP9 Upgrade won't install-- rejects XSKey
I'm trying to ugrade from LP7 to LP9, but am getting the following error message during the install:
"+Your Logic XSKey is not eligible for this upgrade. Please refer to the upgrade requirements for details.+"
My copy of LP7 is not the Academic and Not-For-Resale (NFR) versions. I am trying to install LP9 on my macbook which does not currently have any version of Logic on it. I have been told, however, that this is not an issue and that LP9 will install on the machine.
Any help would be greatly appreciated.hmmm, interesting....
I was also told by apple's pro application support this morning that one can't install LP9 upgrade discs on a mac that has a previously upgraded copy of Logic on it and that people had to enter the original serial number for the very first version of Logic they bought. Obviously this can't be right so I have no idea what to make of any of this.
Message was edited by: dnito -
EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.
Hi Everyone,
I am dead in the water with my test install of EhP5 using the most current installer. This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis 23 and Applications at 19.
The install stops at Start Shadow First, but the instance and work processes are up on the server. The log- SAPehpiConsole reads:
Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: RFC call to upg_is_shadow_system failed with key
RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
Please refer to these logs in the posted replys following this post for readability.
The shadow system work process wp01 log showsan RFC error as follows:
Wed Sep 14 11:29:58 2011
ABAP Program SAPMSSY2 .
Source Line 0.
Error Code DYNPRO_READ_FAILED.
Module $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
Function dy_dbread Line 100.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end no http/smtp
RABAX: end RX_BTCHLOG RX_VBLOG
Error while reading a dynpro.
C Wed Sep 14 11:33:59 2011
C *** ERROR => SQL-Error -204 in function db_open (dbsldb4.cpp 10630)
C {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
C Reopen: FALSE
B *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
dbdynpdb2.c 2506]
B {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BZY=> unexpected return code 4 calling dbdd_dbtab [dbdynpdb 2508]
So I have a problem communicating with the shadow. Or is it a problem with the db_open?
From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
Error Details Error while reading a dynpro.
And trying to logon to the client sends the same message, it does not bring up the login screen.
OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026 Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system. In the month that I have been trying to do this, SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
Any comments or suggestions would be greatly appreciated.
PatThe 2 logs from the installer are here.
The STARTSFI is as follows:
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
repeats the rfc call with a fail until this final entry.
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
The DEVTRACE.LOG is here:
$ Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno 15
sid TEH
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make single threaded, ASCII, 64 bit, optimized
profile /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
pid 75851
kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c 1287]
#shared lib "dw_xml.so" version 100 successfully loaded
#shared lib "dw_xtc.so" version 100 successfully loaded
#shared lib "dw_stl.so" version 100 successfully loaded
#shared lib "dw_gui.so" version 100 successfully loaded
#shared lib "dw_mdm.so" version 100 successfully loaded
#shared lib "dw_rndrt.so" version 100 successfully loaded
#shared lib "dw_abp.so" version 100 successfully loaded
#shared lib "dw_sym.so" version 100 successfully loaded
#shared lib "dw_aci.so" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Sep 13 14:48:58 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >omni_TEH_15 <
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000050000010
DpShMCreate: allocated wp_adm_list at 700000050002970
DpShMCreate: allocated wp_adm at 700000050002b60
DpShMCreate: allocated tm_adm_list at 700000050006f90
DpShMCreate: allocated tm_adm at 700000050006fe0
DpShMCreate: allocated wp_ca_adm at 7000000504c6070
DpShMCreate: allocated appc_ca_adm at 7000000504d3b40
Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
DpShMCreate: allocated comm_adm at 7000000504e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000005056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000005056e110
DpShMCreate: allocated j2ee_adm at 70000005056e150
DpShMCreate: allocated ca_info at 70000005056e950
DpShMCreate: allocated wall_adm at 70000005056e9d0
DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7000000a0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Sep 13 14:48:59 2011
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13097]
Tue Sep 13 14:49:02 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c 12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >omni_TEH_15 <)
DpStartStopMsg: start msg sent
Tue Sep 13 14:49:11 2011
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Sep 13 14:50:24 2011
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms.new", trc level: 1, release: "720"
[Thr 01] Tue Sep 13 14:48:39 2011
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] ms/http_max_clients = 500 -> 500
[Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 92
intno 20020600
make multithreaded, ASCII, 64 bit, optimized
pid 75850
[Thr 01] Tue Sep 13 14:48:40 2011
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
[Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
[Thr 01] 2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
[Thr 01] HTTP logging is switch off
[Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
[Thr 01] *** I listen to port 3615 (3615) ***
[Thr 01] CUSTOMER KEY: >H1357713078<
[Thr 01] build version=720.2011.05.04
trc file: "dev_rd", trc level: 1, release: "720"
Tue Sep 13 14:49:07 2011
***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c 1758]
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 96
intno 20020600
make single threaded, ASCII, 64 bit, optimized
pid 75855
gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
gateway (version=720.2011.04.20)
Tue Sep 13 14:49:10 2011
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/reg_no_conn_info = 1
SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: Initalized shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1002.
CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
Bind service sapgw15 (socket) to port 3315
GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002970
DpShMCreate: allocated wp_adm at 700000060002b60
DpShMCreate: allocated tm_adm_list at 700000060006f90
DpShMCreate: allocated tm_adm at 700000060006fe0
DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
DpShMCreate: allocated comm_adm at 7000000604e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000006056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000006056e110
DpShMCreate: allocated j2ee_adm at 70000006056e150
DpShMCreate: allocated ca_info at 70000006056e950
DpCommAttachTable: attached comm table (header=7000000604e1
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
Tue Sep 13 14:50:14 2011
GwDpInit: attached to gw_adm at 70000006056e110
Tue Sep 13 14:50:16 2011
DpSetProcessPriority: Run priority for gwrd adjusted to 12 -
Application hangs while trying to create a socket
Hello,
We have a third party application that makes HTTP connections using a old version of HTTPClient. Recently we have run into problems where the application hangs as one thread seems to hang while trying to create a socket (thread dumps show the hang occurs in native code) and other threads end up waiting for this thread as they need to obtain a lock on HTTPClient.HTTPConnection. We found out that HTTPClient was not setting a timeout on the underlying socket (SO_TIMEOUT) and the relevant patch has been implemented in the hope that if the condition arises again the offending thread will be timed out and allow other threads to try and continue.
We will not be able to see if the patch works until Monday and I would like to understand the problem a little better if it fails. My question at what point will the socket timeout starting ticking? As our offending thread is waiting in native code is there a chance that the timeout will not be "active".
Also can anyone provide reasons for an application hanging while trying to create a socket and any suggestions for monitoring or mitigating this problem?
Thanks a lot.
Sun Solaris 5.8
JDK 1.4.1 b02It looks like our version of the JDK offer a connect method with a timeout value, I think this will do the trick.
-
JVM hangs while executing a sql query
My JVM hangs while I try to execute an update query. I am using JDBC thin client and Oracle 9i as database. Can someone please suggest what could be wrong.
I have a serious problem regarding the usage of Prepared Statement.
I am working on J2EE based application with the application server as Oracle 9ias.We have mostly used Prepared in 0ur queries.But one our application got implemented we are facing some strange problems.The first instance was a web page was getting hanged and does not give any results.But this had worked fine in all our testing environment.We analysed the table which it uses and still no result.Finally we changed prepared statement to statement and the result page came within seconds.
The second instance is the main issue.Again a query is getting hanged when we try to process it through the web page.We again tested it by converting from prepared statement to statement and its coming within seconds.
Can someone give me some input.Is there any databse parameter that is controlling this prepared statement or statement. -
Timeout error while reading and updating in batches in a single transaction
Problem:-
In a transaction I do read and update to the database in batches. First batch it runs fine and for second batch it get hanged at
sqlCommand.ExecuteReader(). The following is not my complete code but required bits of it which will give more information about the problem. At the end of this post please find the error log. Please help me.
My guess:-
The problem i see here is with the locks acquired while reading and update still remain when it comes for the second batch which is blocking the next read. But could not find a way to solve it.
Get connection and open it.
Begin Transaction.
sqlUpdateTransaction = sqlUpdateConnection.BeginTransaction(String.Format("UpdateUsageDetailTransaction{0}", storageClassId))
Get application lock.
GetApplock
const String sqlText = @"DECLARE @result int EXEC @result = sp_getapplock Resource=@resourceName,@LockMode='Exclusive',@LockOwner='Transaction',@LockTimeout=@timeout select @result";
using (SqlCommand sqlCommand = sqlTransaction.Connection.CreateCommand())
sqlCommand.CommandText = sqlText;
sqlCommand.Parameters.AddWithValue("@resourceName", resourceName);
sqlCommand.Parameters.AddWithValue("@timeout", milliSecondsTimeout);
sqlCommand.CommandTimeout = secondsTimeout;
sqlCommand.Transaction = sqlTransaction;
Int32 lockResult = (Int32) sqlCommand.ExecuteScalar();
Seek and read the range of records.
using (var sqlReadConnection = new SqlConnection(_connectionString))
sqlReadConnection.Open();
SqlTransaction sqlTransaction = _sqlUpdateTransaction;
_cdrList = CdrOps.FetchByrecordsIdRange(_yearMonth, firstSkid, firstSkid + count - 1, sqlReadConnection);
sqlReadConnection.Close();
return _cdrList.Count > 0;
static public Dictionary FetchByrecordsIdRange(Int32 yearMonth, Int64 startCdrId, Int64 endCdrId, SqlConnection sqlConnection)
Dictionary cdrList = new Dictionary();
using (SqlCommand sqlCommand = sqlConnection.CreateCommand())
sqlCommand.CommandText = "EXEC P_GetCDRData @yearMonth, @startCdrId, @endCdrID";
sqlCommand.Parameters.AddWithValue("@yearMonth", yearMonth);
sqlCommand.Parameters.AddWithValue("@startCdrId", startCdrId);
sqlCommand.Parameters.AddWithValue("@endCdrID", endCdrId);
sqlCommand.CommandTimeout = DbOps.TwoHourTimeoutValue;
using (SqlDataReader sqlDataReader = sqlCommand.ExecuteReader())
FetchrecordPieces(sqlDataReader, cdrList);
return cdrList;
Update the records to the list by using a loop Go and check if the number of records read is equal to the batch size then write and flush.
update()
_tollUpdatedList.Add((Toll) record);
_legacyUpdateCount++;
Dispose.
Dipose()
if (_sqlUpdateTransaction != null && _sqlUpdateTransaction.Connection != null)
sqlUpdateTransaction.Rollback(String.Format("UpdateUsageDetailTransaction{0}", _storageClassId));
_sqlUpdateTransaction.Dispose();
_sqlUpdateTransaction = null;
Commit.
commit()
if(_sqlUpdateTransaction != null)
_sqlUpdateTransaction.Commit();
_sqlUpdateTransaction.Dispose();
_sqlUpdateTransaction = null;
Error log.
Error: [0x80004005] MonthlyFileDb::Seek - Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.Thank you, I used beta_lockinfo and observed the following
spid=59/0/2
command = SELECT
appl=.Net SqlClient Data Provider
hostprc= 3640
dbname = DEV_ECAP_P_CAP_ENT_CMN
prcstatus= SUSPENDED
spid_ =
59/0/2
blklvl = 1
blkby = 55
rsctype =
locktype =
lstatus =
ownertype =
rscsubtype =
waittime = 785.139
waittype = LCK_M_IS
spid__ = 59/0/2
nstlvl = 3
inputbuffer = (@yearMonth int,@startCdrId bigint,@endCdrID bigint)EXEC P_GetCDRData @yearMonth, @startCdrId, @endCdrID
current_sp = DEV_ECAP_P_CAP_ENT_CMN.dbo.P_GetCDRData
spid=55
command = NULL
appl=.Net SqlClient Data Provider
hostprc= 3640
dbname = DEV_ECAP_P_CAP_ENT_CMN
prcstatus= sleeping
spid_ = 55
blklvl = !!
blkby =
rsctype = APPLICATION
locktype = X
lstatus = grant
ownertype = transaction
rscsubtype =
waittime =
waittype =
spid__ = 55
nstlvl =
inputbuffer =UPDATE UsgDetailCommon SET RunId = t2.RunId FROM UsgDetailCommon t1 INNER JOIN #UsgDetailCommon_Update t2 ON t1.YearMonth = t2.YearMonth AND t1.CdrId = t2.CdrId ;DROP TABLE #UsgDetailCommon_Update
current_sp =
But what is the solution for this...? I am googling and I found similar post but with no solution, here it is not allowing me to post html link -
An error occurred while reading document
Hello all,
First let me apologize for the lengthy post, but I want to be clear. :-). Ever since I upgraded my iPad 2 to the newest iOS 8 release, I have had issues with my tablet. It is running slower, as I type this out there is a delay with the press of each letter. I have to wait until each letter is typed before moving on to the next section when filling out forms for example. Openings apps has also been slower and several apps have crashed unexpectedly. While visiting websites the connection is also slower and while searching for items on Google, the search results are listed but when I try to click on one of the items, not happens. The links are not available but they are listed. I have to switch to another app or refresh the page or sometimes both in order to be able to click on one of the results.
But the most annoying issue is that I cannot open attachments up from my iOS email now. Before I was able to open the attachment and see a preview of the attachment whether it is word, excel, PowerPoint, etc. I would then open that attachment in my word processing app to edit or open the file in a pdf converter for publication, But now when I get an attachment and try to open it from iOS mail, I get a blank page with the document file name and "Microsoft Word 97-2014 document" and the size of the document. These files are files that I edited in a word processing app, CouldOn, which I then email to myself so that I may get the file into my pdf converter app. I have done this several times before the upgrade now.
I also tried to open the file in my pdf converter app even tho it was not showing in the iOS Mail preview, but then I get an error message stating "An error has occurred while reading the document".
This is really frustrating. I have googled my issues but didn't really refined any solutions, I did find some others had similar issues but they were with other previous versions of iOS, not the one I have now. Can anyone help me out here? This has basically caused my work to stop, if I cannot be sure that attachments are not going to have any issues when they are sent to clients, then I cannot send them, I need to get this fixed ASAP. Has anyone else had these issues?Adding to above, I have latest update for Pages. I can open documents on my iPad that are not locked. But now, I can't get to the "lock" buttons to unlock it. On my Mac, iCloud and share document is on.
-
The upgrade hangs a lot of time in phase PARCONV_UPG, SHADOW_IMPORT_UPG2..
Hello!!:
I'm doing the CU&UC, as say the Guide, and now i'm upgrading my 46C MDMP system to Ecc6.0 nounicode (later i'm going to
do the unicode).
In the phases RUN_RADCUCNT_ALL, SHADOW_IMPORT_UPG2,....has been a lot of time.
In the Note OSS 558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2, there is a solution
for a Oracle Database, but we have MSSQL2005 in a Windows Server.
In this moment in our DB we have applied as say the Note OSS 187493 - DB13 jobs 'Check table Consistency'
and 'Update statistics', and sometimes in the biggest tables we apply the Note OSS 771352 - Manual UPDATE STATISTICS
re-enables Disabled Automatic Stats
Can you help us? In this moment the upgrade downtime is 48 hours (and we haven't yet done some phases of the
upgrade)
Thanks an regards,
Alfredo.Alfredo,
Here is the down and skinny on this - PARCONV_UPG can be addressed with ICNV (Incremental Table Conversion) which you can run during the 'Up' Time of the upgrade. Of course there are some limitations put on you when using this solution but it will help to reduce your down-time windows be pre-converting tables during up-time. Those tables that are not converted in ICNV will have to be converted during down-time during the PARCONV_UPG phase so I am pretty sure that your database is getting its (stuff here....) handed to it.
As a 'suggestion' and not a rule here (because it effects recovery of SQL Databases) you can look at using Bulk Logged or Simple Logged modes if your system is using Full-Logged mode to speed things up a bit (actually quite a bit if Full-Logged is enabled).
As for the SHADOW_IMPORT_UPG2 - this is mostly going to be tp putting things in the system and some compiling - the speed of the Db and the processors play a big impact in this. You can watch the SLOG in the upgrade directory to check this out (look in your upgrade guide for Log Files during this phase to get their names and locations) to see if anything is hanging but I would probably expect not much is going on.
Overall you need to identify the bottleneck first - CPU, Memory, Db I/O, a number of things can contribute to your issues of slow upgrade time - as I would have to agree with SAP that there is nothing wrong with the Upgrade Process (except that you can take advantage of things like ICNV where possible - read the upgrade guide and hit the notes and help first!!). Everything else is going to be your setup and how it reacts to the different activities in the upgrade.
So check those out first - let us all know what you come up with and hopefully we can fix your problem directly and quickly.
Edited by: David Milliken on Apr 3, 2008 7:09 PM
Edited by: David Milliken on Apr 3, 2008 7:10 PM -
Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to server
We have Adobe Connect 8 (Multilanguage - Portuguese) installed on a server. Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to the server. Hayward Drummond has posted a notice about Adobe Connect 8.1.2 that seems to solve this problem, known as BUG 2886745. I sucessfuly downloaded this update but I´m not sure if it is compatible with Adobe Connect 8 Multilanguage - Portuguese. Does anyone know something about it? I also need to first install version 8.1.1 in order to upgrade to 8.1.2, as remarked by Hayward. Does anyone know where can I download version 8.1.1 (Multlanguage - Portuguese)?
try to install Firefox 8 on top of Firefox 7, or
Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
here explain how to backup profile
* https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
here explain how to restore it
* https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
Maybe you are looking for
-
Portrait mode is all messed up
Hi, I have landscape mode working perfectly. I would say insert page from chapter (using a template from apps store). And then, insert pages from pages for the text for each chapter. But, in portrait mode is shows all the photos I deleted from the te
-
How to disable browser next and previous buttons for entire ADF application
Hi, JDev Ver : 11.1.1.2.0 How can I disable the browser navigation buttons next and previous for my entire ADF application. If user click on page and then if it press backspace key then it should not go back to the previous opend url and the current
-
Adobe protège t-il du piratage
Bonjour, Je suis un fréquent utilisateur de videos sur internet. Equipé en Mac, je constate très souvent que lorsqu'une video est en flash, on peut la lire très facilement. Avec le Silverlight de Microsoft, c'est beaucoup plus dur. Vous pouvez faire
-
Dear Experts, Please how will i see the list of background job those are running??? Regards Sumit Kalyan
-
Hi all, It seems currently that the forecast can only be done every week or every month. Apparently the 'rollup' feature is to update totals etc. I tried putting in NEW opportunity revenues and products and i cant see any updates. Does it only update