Lpadmin creates printer, share this printer selected

I have used the following command to install a printer:
/usr/sbin/lpadmin -p "name of printer" -E -v lpd://"printer IP or DNS"/"queue name" -P "path to PPD file" -D "description"
however, after looking at the printer on the computer via sys prefs, the printer has been added with the "share this printer" checkbox enabled.
How do I deselect share this printer via cli? (or, how can I modify my command so that this isn't enabled?)
Thanks in advance

The only way I get an update of at least printer sharing is: SysPref/Sharing/highlight printer sharing(not checking it/Open print and fax preferences. See below pic.

Similar Messages

  • HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

    I have three Airport Extreme (AE) routers in my home network.
    The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
    I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
    What should I do?
    For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
    For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
    FYI
    HP LaserJet Firmware Update Utility for HP P2035n is available
    Version: 20120105 (19 Mar 2012)
    Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
    File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
    line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

    Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
    Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
    My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
    The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
    You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
    Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
    I'm assuming that you are asking about an Ethernet switch here, correct?  The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
    Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
    Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
    Post back if you need any tips to get things setup.

  • Can "share this printer" on a MacBook pro allow my iDevices to print on a non AirPrint printer?

    I have an Epson USB printer CX7400 (does not have AirPrint) connected to an Apple Airport Express that is connected to an Apple Time Capsule wirelessly.
    I can print from my MacBook and other Ubuntu systems.
    But...
    I have iDevices (iPad etc) that I would like to print from to.
    I have a MacBook pro with the current operating system and updates and notice that I can share the printer on the network.
    I have seen posts (might be old?) where that was enough to print from and iPad or iPhone etc?
    Is that still true?
    THANK YOU for taking your time to write!
    NOTES:
    IPad Air, Macbook Pro mid 2012.
    I did not get the impression the Epson was supported with the Epson app but I could wrong.
    Message was edited by: VitalBodies

    Can "share this printer on a MacBook pro allow my iDevices to print on a non Airprint printer?
    No, but you might be able to print from the iOS devices but installing an App like Printopia on your Mac.  Printopia has a free trial, so you will know if it will work before you buy.
    More details here, if you are interested:
    Printopia - Ecamm Network

  • CREATING PRINT LAYOUT IN CRYSTAL REPORT

    how to create print layout that will show the encircle below. thanks

    Hi Romel,
    Please check below Query.
    SELECT T0.[DeposDate], T1.[CheckNum], T1.[CheckSum], T1.[BankCode], T1.[Branch] FROM ODPS T0  INNER JOIN OCHH T1 ON T0.[DeposId] = T1.[DpstAbs] WHERE T0.[DeposDate] >=[%3]  AND T0.[DeposDate] <=[%4]
    Hope this helps
    Regards::::
    Atul Chakraborty

  • How to print selection only

    I saw this question on another forum and realized that I have no idea how to print 'selection only'. The only options in the file>print menu are for the pages desired. I see no way to print only the selected portion of a page. There must be a way, but I do not seem to be able to find the answer.
    Thanks, Fran

    I tried it with 'Grab' but the printout was too large. I then discovered that if you use 'Snag It' you can accomplish the same thing. Press Shift-command-3 for the whole screen or Shift-command-4 for a part of the screen. this creates a PNG image which when opened in 'Preview' can be printed. Rather complicated, but it does work. Thanks for steering me in the right direction.
    Fran

  • How to print "selected objects" in InDesign CS4?

    I have a large calendar in ID CS4. I want to print and view some of the text in its actual size. My printer can only print A4 documents. How can I print only selected texts and objects in its actual size in this application?
    Although copying and pasting the text in another A4 sized document (IDCS4) would do it but there is no native support of "printing selection" but Microsoft's "Word' has!

    I think the layer option is best.
    Select what you want then open the layers panel and create a new layer. Select the objects you want to print, then in the layers panel you will see a small square to the right of the layer name. Alt Drag that to the new layer to copy the items, you can then turn off the visibility to the other layer and just print out the new layer.
    Then switch the visibility of the layers around to view the original artwork.

  • Taking Long Time To Show Printer Selection Window

    Hi experts,
    When users are taking printout through SAP,it's taking long time to show printer selection window(Local Printer Selection Windows)
    present i am using sap ehp7 on sybase in windows.
    Thanks in advance..

    Hi,
    Have you tried by reinstalling of printer with patch updation of printer as well as of windows also ? If possible try to uninstall the printer & check again by reselection.
    Addition to it could you please share SAP GUI version on the system & confirm for, are you getting this issue on every system ( OS ) ?
    Regards,
    Gaurav

  • Printing selected pages of a PDF to Adobe PDF

    I have Acrobat 9, Windows 7, and was happily creating new files from existing PDFs by printing selected pages to Adobe PDF. After having done this a hundred times or so, the process stopped working. I got this message: "When you create a PostScript file you must rely on system fonts and use document fonts. Please go to the printer properties, 'Adobe PDF Settings' page and turn OFF the option 'Rely on system fonts only; do not use document fonts.'" Then I get a message, "The document could not be printed." Then I get a message, "There were no pages selected to print."
    First, I wasn't having any problems up to this point; second, I'm not trying to create a postscript file, I'm just trying to print to Adobe PDF (as in, just page 3 of a six-page document."
    Any suggestions? Thanks!

    I downloaded the Arcobat SDK and now learning to use it with its sample.
    However, I got stuck when I run the program BasicIacVB.
    I got the following error message:
    Cannot create ActiveX component.
    When running the line
    gApp = CreateObject("AcroExch.App")
    I run this program on my PC with VS2005 installed.
    What extra step do I need to do to use the sdk?
    Seems there's no installation package there...
    Sorry about my stupid question, I am a total newbie in AcrobatSDK.
    P.S.  My ultimate goal is to develop the program in VB6 (not using VB2005),
    as my client PCs does not (and cannot for some reason) install .net framework.

  • ARGH-HUH! Print v Print Selected Pages

    Good god almighty.
    Is there a way to get Preview to Default (I know I said Preview) to print all the pages when I go Print and then I end up pulling down to "pdf" to print a pdf?!
    For the umpteenth time I have scanned a 50 page document, gone to print a pdf of this scan, and accidentally hit "Print" (go figure) instead of selecting all the pages (!?) and hitting Print - and then of course pulling down the pdf and going to Save As pdf.
    Print defaults to the selected page ?! and Print Selected Pages works if you select all the Pages?
    I have to scan the whole darn document again...
    What am I missing? Also, apologies for posting in Pages but I can't find any place else to address this.
    Thanks!

    As we will have to wait for at least a few days, here is my workaround.
    --[SCRIPT printseveralpictures]
    Enregistrer le script en tant que Script : printseveralpictures.scpt
    déplacer le fichier ainsi créé dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:
    Ouvrir plusieurs images dans Aperçu
    Aller au menu Scripts , choisir "printseveralpictures"
    Le script sélectionne toutes les vignettes d'images
    puis exécute la commande "Imprimer les images sélectionnées…"
    Il vous reste à définir la destination (imprimante ou PDF) et à valider.
    --=====
    L'aide du Finder explique:
    L'Utilitaire AppleScript permet d'activer le Menu des scripts :
    Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case "Afficher le menu des scripts dans la barre de menus".
    Sous 10.6.x,
    aller dans le panneau "Général" du dialogue Préférences de l'Éditeur Applescript
    puis cocher la case "Afficher le menu des scripts dans la barre des menus".
    --=====
    Save the script as a Script: printseveralpictures.scpt
    Move the newly created file into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:
    Open several pictures in Preview
    Go to the Scripts Menu then choose "printseveralpictures"
    The script select every pictures thumbnails
    then trigger the menu item "Print Selected Pictures…"
    Then you must define the target device (printer or PDF) then validate the action.
    --=====
    The Finder's Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the "Show Script Menu in menu bar" checkbox.
    Under 10.6.x,
    go to the General panel of AppleScript Editor’s Preferences dialog box
    and check the “Show Script menu in menu bar” option.
    --=====
    Yvan KOENIG (VALLAURIS, France)
    2011/02/04
    --=====
    on run
    run script doyourduty
    end run
    --=====
    script doyourduty
    my activateGUIscripting()
    tell application "Preview" to activate
    tell application "System Events" to tell application process "Preview"
    set frontmost to true
    tell (first UI element of scroll area -1 of first splitter group of window -1 whose role is "AXGrid")
    set {grid_X, grid_Y} to position
    set {grid_w, grid_h} to size
    end tell
    click at {grid_X + (grid_w div 2), grid_Y + 20}
    keystroke "a" using {command down} -- cmd + A
    keystroke "p" using {command down, option down} -- cmd + alt + P
    end tell
    end script
    --=====
    on activateGUIscripting()
    (* to be sure than GUI scripting will be active *)
    tell application "System Events"
    if not (UI elements enabled) then set (UI elements enabled) to true
    end tell
    end activateGUIscripting
    --=====
    --[/SCRIPT]
    Yvan KOENIG (VALLAURIS, France) vendredi 4 février 2011 15:22:47

  • Regarding printer selection

    Hi,
    I create sap script form which some document will printed in a printer.
    now i need to make the printer selection in my selection screen. i have declared a paramter P_print.
    when i press F4 on this parameter, program should give me the pop to select the printer which configured in the system.
    Please tell me how to d oit . do we have any FM
    Thanks,
    Suresh

    Define your printer like:
    PARAMETERS      TDDEST   LIKE TSP01-RQDEST VISIBLE LENGTH 11.
    Regards,
    Naimesh Patel

  • Printing Selection

    How do I print selection? In XP I could select text, print, and check selection to only print what is selected. Is this not an option on MBP? I used to use the grab feature, but for some reason the options under services/grab are grayed out and besides, this was a pita way of doing it anyway. Any ideas? Thanks!
    -Erick

    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • How to print selected cells in numbers

    Does anyone know how to print selected cells in a Numbers spreadsheet, rather than printing the entire sheet?
    Also, how to save the selected cells as a pdf file without saving the irrelevant cells?

    Hi nmygs,
    How about this?
    Cell A1 is a Pop-Up Menu containing names of the various "Departments"
    Other cells contain formulas to find a match for whatever is chosen in A1 from the Very Big Data Table.
    Reusable Print Me table.
    Regards,
    Ian.

  • URG:11i to R12.1.3: Invoice print Selected Invoices fails with REP-1419

    Hi,
    Invoice print Selected Invoices fails with the following error: Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    REP-1419: 'beforereport': PL/SQL program aborted.
    Checked the setups based on 557171.1, 375693.1,1101855.1.
    Still the issue is existing.
    May i know the cause of the issue or is it a bug?
    Thanks
    Nancy

    Hi ,
    The cause of the issue is the standard rdf is set to run for single operating unit. But R12 is a moac setup enable application. Hence The operating unit mode is changed to Single from null in system administration concurrent program setting for the XML report concurrent program.
    This fixed the issue.
    Thanks
    Nancy

  • How do I print selected pages from a multi page document

    How do I print selected pages from a multi page document?
    This question was solved.
    View Solution.

    Hi,
    It depends on the software you are using, what is it ? In general you can select a range or just a number of pages.
    Regards
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Printer selection dialog on client by servlet

    I have to fire a print out from a jsp page.
    I am using java.awt.PrinterJob, Printable and Book classes for the print.
    When I call the PrinterJob.printDialog(), the Printer Proerties selection box
    is popped on the server.
    Is there any way I can pop up the printer selection dialog box on the client machine?
    Thanks

    Servlets is executed in the server, for that reason it appears to you the window of impression in the server, and not in the client.
    In order to print in the client I suggest one to you of these 2 solutions:
    First solution: When the user wants to print something, he creates a new window of the browser with a page HTML that contains what you want to print and to print it from there with javascript. Something complicated if it is not known like doing it. See the javascript code window.print();
    Second solution: To use the program Crystal Reports. The quality is excellent, but it is necessary to buy it.
    greetings.

Maybe you are looking for