LPCONFIG Error while activating logical port

Hi
While creating logical port to a proxy class via LPCONFIG, I get the following error message
Message no. SRT_LPREG029
Configuration is valid but messages exist
I am able to save it but not able to activate it.
Please let me know the solution.
Thanks & Regards
Madhu

Hello Inaki.
it occurred after EHP3 upgrade on CRM 7, before it was working properly.
Thx
Matus

Similar Messages

Error while determining logical Port

Hi
This is a ECC to SRM scenario:
I get this error in the Call Adapter step. I am using WS Adapter at the receiving side.
"Error while determining logical port Cannot find logical port for agreement abc and interface xyz"
Why do I get that error and any suggestions ?
Regards
Harish

Baskar,
I didn't fix any issue. I was trying tofind out why the error happens. There is a proxy created at ECC side. I saw that. But target is using WS Adapter and it's that adapter which is throwing errors about logical port.
I read the blog but couldn't figure out. Does WS Adapter need proxy code? Can it work without proxy code? I don't see any proxy code for receiver WS Adapter. I was wondering whether the absence of the proxy code gave this error about logical port
Regards
Harish

Error while creating logical port for Consumer Proxy in SOAMANGER

Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari Nambiar

Hi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar

Error while creating logical port in SOAMANAGER

Hi,
Im consuming the webservice.While creating the new logical .Im getting the following error.
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://vmtmasterdev.rune2emaster.rune2e.com:1080/sap/bc/srt/wsdl/sdef_Z_NUMBER/wsdl11/ws_poli
I have entered logical port name,description, URL for WSDL access.When i press enter i got the above eeror.
Please help me.
Regards,
Brahmaji

Hi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache

Error while creating logical port for Reporting

Hi,
In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
When i am trying to create the logical port, i am getting an error saying,
" SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
And in case it has to be created, how to resolve this SRT framework exception?
~ Ramanath.

Hi,
the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
You should find one entry. Select it and click "Apply Selection".
Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
Copy this value and go to your SAP GUI -> Transaction SM59.
Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
Regards,
Holger.
PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently.

Error while creating logical port from WSDL in SOAMANAGER

Hi,
I am trying to create a logical port for the webservice TerritoryCRMBasicDataByIDQueryResponse_In with the WSDL
http://usciq9e.wdf.sap.corp:50077/sap/bc/srt/wsdl/sdef_TERRITORYCRMBASICDATABYIDQUERY/wsdl11/ws_policy/document?sap-client=506
In SOA Manager, I selected the proxy object and clicked on 'Create Logical Port' ,
gave the name and description for the port and set it as default.
The other settings are :
Configuration type : WSDL based configuration
WSDL base is : Via HTTP Access
Then I gave the address of the WSDL in the URL and the proper username and password. When I clicked on 'Apply Settings' I get the following error:
"Error when building binding view: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL "
Please advise me on how to approach the problem.
Thanks,
Sashi

Creating logical ports is done here:
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/cc8fd368c873dfe10000000a11466f/frameset.htm

Error while creating logical port in SOAMANAGER and testing it

Hi,
When I enter WSDL Access user and password in cnfiguration tab( SOAMANAGER),Im getting error as,
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://cryo-cell.net/Inventory/Inventory.asmx?WSDL .
if I didnt enter WSDL Access user and password in cnfiguration tab( SOAMANAGER),Im not getting error.
I continued with out giving WSDL Access user and password
I consumed the asp .net webservice, while testing it (test service consumer, SE 80) ,I got following error
after giving user id and password.
SOAP:1.007 SRT :Unsupported xstream found:
(HTTP code 401 : unautorized")
please help.
Regards,
Brahmaji

Hi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache

Problem while creating logical port using soamanager

Hi all,
I have created a client proxy for web service from a 3rd party system.
When i am creating a logical port for the same consumer proxy i get a error as follows:
RABAX_STATE -e: UNCAUGHT_EXCEPTION
and a dump saying
" The exception 'CX_SXMLP' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
'CL_SXMLP_FRAGMENT=============CP' has to be terminated.
Please suggest what can be done or what can be the problem.
Thanks in advance.
Komal

Pls go to txn SM59 and check if the RFC destination for webservice is working in the test connection.
Then go to txn LPCONFIG and create the logical port using the RFC dest. Pls mention the path suffix appropriately.
Next in your code while instantiating the client proxy pass the logical port name in the constructor (if the LP is not maintained as default).
Pls reward points if the tips are helpful.

Error while activating query element.

Dear All
Can any one tell this error .
When iam transporting the queries to BI production there is an errror in Transportation log that error while activating query element.
But the querysis fine in Bi quality.
Error : Error while activating "6899QYGVHJPGYUBLKA9SPHORZ".

Hi
Might be that query element was deleted(not used n was used before in dev) while creating cross check once in your query.
First check what is that element which is not transported?
use table RSZELTDIR to find out weather its a Var or CKF or RKF etc...
then check for the same in the query in QA weather its active and ported fine to QA if not try to collect the element and transport to QA in a separate request.
Regards
KP

Error Message "No logical port exists to call web services" installing SM7

I am trying to use SLM to download a service stack. However, the option is not available in step 2.5. There is an error message "No logical port exists to call web services". I have performed the Wizard install, but the Wizard seems to have left out this step. I have looked around for documentation on how to configure the port, but cannot find anything more useful than comments to the effect that I should configure the port.

I found the problem, I think, although I am now on to the next problem. "Web Services for software lifecycle manager not available'.
The documentation is lacking. When the RFC connection is set up, the user id is j2ee_admin, using the install password. This is not specified anywhere in the install instructions that I could find, there is only a reference to a 'user id and password'.
The LPCONFIG is used to create a logical port, that ties the RFC to the LP. However, no name is specified that is to be used for the LP.

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

LPCONFIG Error while activating logical port

Similar Messages

Maybe you are looking for