LPX apogee duet interface I/O but I get only the dry signal back to monitor
I use an apogee duet as I/O interface, the input channels all ok but I get only a dry signal back to the monitors. What I have to do for right routing the wet signals to my monitor? Duet is input and output (speaker) in the mac system and Logic Pro X, core audio is active.
I Assume you mean when you are recording. You have to turn software monitoring on in the audio preferences or you can right click in the transport bar and check off thr box on the right hand side that says software monitoring. That will give you reverb or whatever on the recording channel for listening but it wont print the effect. It is just for listening
Similar Messages
-
iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?
Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1) -
While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?
Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.
-
I lost my photo album pictures, trying to locate them ,but I have been unsuccessful in doing so, it gives me the option to switch albums ,but there is only the second album showing that I had to recreate.
Post in iPhoto forums.
-
When I purchased my iphone and ipad last week they told me I would connect the ipad to the internet through the phone but can get niether the phone nor the ipad to see the internet?
Connecting the iPad to the internet via the iPhone is done by setting up a personal HotSpot, but you have to have that supported by your carrier and have to have established the account to do so.
On the iPhone, Settings > General > Network > Set Up Personal Hotspot -
I go onto manage account to change the security questions because I've forgotten them but to get onto the security section i need to answer security questions. What do I do???
Ok, so I had the same problem. What you should do is, call the
Apple Technical Support number: (44) 0844 209 0611
And ask for the Account Security Team. This worked for me. -
I recently tried to import 2 CDs but on one, only the first 4 songs imported and on the other, only the first 6 songs imported. The CDs work fine in a CD player. Any suggestions?
Rip the CDs with another program on your computer, and add the resulting MP3s to your iTunes library. (If you use Windows Media Player for this purpose, make sure the Rip Setting is on MP3, or else it will default to a useless format known as WMA.)
-
I bought my phone from apple store they said its sim free but now i insert the sim signal is coming but its showing on screen activation required can anyone help plz
If your iPhone is new and you purchased from an Apple (Corporate ) Retail Store then you have to activate after inserting a new carrier sim for first time
See here
http://www.apple.com/support/iphone/essentials/ -
I have a 25" 2.8 GHz Intel core 2 Duo working on OS X 10.8.4, within past 2 days we've had the black screen and the white screen, we are up and kicking again but I can leave the computer playing music from iTunes, but within 10 minutes the screen is back, yet the music is still playing in the background. I can't get rid of the black screen unless I force quit the computer, then it starts ok. Then the process starts all over again.
I have a 25" 2.8 GHz Intel core 2 Duo working on OS X 10.8.4, within past 2 days we've had the black screen and the white screen, we are up and kicking again but I can leave the computer playing music from iTunes, but within 10 minutes the screen is back, yet the music is still playing in the background. I can't get rid of the black screen unless I force quit the computer, then it starts ok. Then the process starts all over again.
-
I bought photoshop cc and ligtroom cc but i got only the test version
I bought photoshop cc and ligtroom cc but i got only the test Version. How can i Change it?
Hi Sheena,
thank's for you help and sorry about my bad english. I couldn't found the Option for deactivate PS CC, or are they mean to deinstall it?
Regards
Bernd
Download the Adobe Application Manager installer for your operating System.
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac OS: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Run the executable or DMG file and install Adobe Application Manager.
Launch a CS6 Suite product.
Choose Help > Deactivate. This Option I couldn't found in PS CC
Follow the onscreen instructions to Deactivate the product.
Close the product.
Launch a CS6 Suite product.
Click Accept in the EULA dialog to continue.
Sign in with your Adobe ID.
Once the product finishes launching, close the product.
Relaunch the product.
Click License This Software.
Sign in with your Creative Cloud Adobe ID.
Launch the desired product. -
Help. I downloaded the OS lion. Then I imported some photos with the "iPhoto". But I see only the photos in the "last import" but I can not see in the library or photos of events, although they are marked as a number.
bioetico wrote:
I understand the problem, why is the date before which the photos.
LN -
i'm updating my iphone 3gs but i get to the activation point and it tells me the activation server is temporarily unavailable and i keep trying .i'm worried to loose some of the memo? please advice
That's almost always because the phone was hacked or jailbroken to unlock it.
-
Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?
Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.
-
I have a good connection thru both wifi and ethernet but cannot get to the internet
I have a good connection thru both wifi and ethernet but cannot get to the internet
Which model iMac do you have? Which OS system is currently installed on your comp?
-
I downloaded a track from a classical guitar CD on my wife's PC. It's supposed to be 3:29 (that's what shows in the playlist), but it plays only the first 29 sec before skipping to the next track. How can I re-download it without paying again? Thanks.
I cannot find Purchased on the iTunes Store. Could you upload a screenshot so I can see how to get there?
update: I found it out. It's on the home screen of the store, next to your account options on the right.
Maybe you are looking for
-
Cannot bring instance up due to datafile related error
DB Version: Oracle8i Enterprise Edition Release 8.1.7.2.0 After a system crash(AIX), when i try to start the instance i am getting the below mentioned error. $ sqlplus "/as sysdba" SQL*Plus: Release 8.1.7.0.0 - Production on Fri Jul 18 05:03:20 2008
-
Flash CC - Single mouse wheel notch does nothing
It appears this is part of the deisgn and not a bug, but it's annoying nonetheless and I can't see the benefit of it. If I scroll 1 notch down or up with the mouse wheel, it does nothing. I have to do 2 mouse wheel notches to make it move 1 notch IOW
-
Organisational Unit Authorization not getting effected
Hi gurus, I m facing problem while providing the authorization.We have an role base authorization structure.I had provided as * in organisational leve for all plants or shipping point or any org element for master roles.But when I m copying the maste
-
I can't connect with people on my iSight!
I bought iSight today and hooked it up to my computer. Everything seems to be working perfectly well: the green light is on, the iSight logo appears next to my icon, i can preview my video chat. However, there is one major problem - I can't actually
-
Is there a lap timer feature?
If not I would gladly trade the dorky power song feature for one.