LPX input monitoring problem, and varispeed

Every time I select a track for a guitar, then turn on input monitoring , once I press play I get no sound coming through.
Same thing once I enable varispeed.
Is there something not checked that needs to be?
Thanks

Turn off input monitoring.
Enable software monitoring instead, you should then be able to monitor if the track is record enabled.

Similar Messages

Input monitoring problem

Hi all!
I've got the latest version of GarageBand that runs on my OS X Mavericks. The problem is with my guitar tracks. I plug in using my line-in input with simple cord and at first, there is no problem. I can hear my guitar playback live in real time(i.e. input monitoring is on) on the guitar track. But then something happens and my guitar sound disappears from the track, although the input monitoring function is still shown as working. Can somebody please tell me why this is so?
All help much appreciated.
therealking

I have a similar problem, although I'm on Logic Pro 8.
I can't seem to record my guitar track (mic'd cabinet) without having the result monitor back through my studio monitors unless I turn off software monitoring in Preferences/Audio. But then if I want to record keyboards direct and listen to what I'm playing, I have to go back in and turn the option back on.
In Sonar on the PC, this was much more intuitive. You could arm a track for recording by clicking the "R" button, and separately toggle monitoring on and off by clicking the little speaker button to the right. You didn't have to constantly fiddle with the program preferences.
I have a FireWire410 interface, and the monitoring only happens when Logic is loaded. I would have thought that the little "I" icon was to turn monitoring on and off, but it's some "pre/post-tape" toggle I can't find a use for.
Kevin, how did you control your monitor mix before?

Input monitoring problem during recording

Greetings,
I recently purchased Logic Pro 9, and am having a problem with input monitoring. I am not able to in any way affect control over my monitor mix during recording. I have tried every combination of options, including software monitoring, auto-input monitoring, etc...but always get the same headphone levels from my inputs (I am actually trying to mute the input signals out completely so that I can play along to only the click.
I am wondering whether this is some sort of software glitch, because I was able to control the mix perfectly before the latest software update. I wonder if that is the problem, or if I am overlooking some minor detail. Please help!!
BTW, I have checked, and this is definitely a software, not a hardware issue...
Thanks much,
Kevin

I have a similar problem, although I'm on Logic Pro 8.
I can't seem to record my guitar track (mic'd cabinet) without having the result monitor back through my studio monitors unless I turn off software monitoring in Preferences/Audio. But then if I want to record keyboards direct and listen to what I'm playing, I have to go back in and turn the option back on.
In Sonar on the PC, this was much more intuitive. You could arm a track for recording by clicking the "R" button, and separately toggle monitoring on and off by clicking the little speaker button to the right. You didn't have to constantly fiddle with the program preferences.
I have a FireWire410 interface, and the monitoring only happens when Logic is loaded. I would have thought that the little "I" icon was to turn monitoring on and off, but it's some "pre/post-tape" toggle I can't find a use for.
Kevin, how did you control your monitor mix before?

Audio Input Monitoring Problem

Hello,
I am having a problem where I can always hear the signal being passed to the external inputs of my soundcard, regardless of whether or not Software Monitoring is enabled, in fact, Logic doesn't even have to be open! Due to this fact I believe this is an OSX issue, however, since it is effecting Logic I am hoping someone here can assist, as I am at my wits end.
My setup:
Dual 2.5 G5
2gig RAM
OS X 10.4.4
Logic Pro 7.1.1
Emagic AMT8
Emagic a2|6
I have tried reinstalling the a2|6 software thinking the problem may have
been corrupted drivers, but to no avail. I have tried to mess around both in
the Sound Preferences and Audio Midi Setup sections, but no love there
either.
Weak sauce.
Anyway, I'm sure this is something simple and I am just doing something
stupid wrong, but I can't figure it out, and hence, I post to you. Thank you
in advance for your time and consideration.
michael

do you have a external mixer mixerboard ?
or is your source plugged straight into your interface ?
maybe its not software monitoring it might be hardware monitoring so check your mixer or if not check the control panel of your interface because you can use it as a virtual hardware monitoring when you change few settings like...
in the Patch bay of delta 1010LT i can set...
Analog output 1/2 to Monitor Mixer,then i'll set the monitor mixer to settings like ...
Master on full
Software input 1/2 set to full( which is what is coming out of logic or the mac )
Software input 3/4 set to full or off ( which is what sends to my TC Electronics Finalizer 96K)
Analog IN 1/2 and 3/4 set to full ( which is automatically receiving the signals from external source even if i don't open any applications)
S/PDIF also set to full ( this monitors the output of my TC Electronics Finalizer 96K )
so check your interface to make sure none of this is not the problem if you don't want to continuously monitor the input source
using my setup means it bypass the software monitor maybe that what the problem is for you
stash

Dual Monitor problem and an idea

Hey everyone. I use two monitors and when i have iTunes open on the primary one(the laptob monitor) i am able to scroll through my music in iTunes using my mouse wheel. However, when iTunes is opened on the other monitor, scrolling through songs with the mouse wheel doesnt work and i have to do it using the scroll bar. Other applications such as firefox scroll just fine on both monitors. Any ideas??
Also, I couldnt find anywhere to post suggestions so im just gonna do it here. I think it would be nice to be able to save playlists and then be able to load them if you ever have to reinstall itunes or there is some other issue. I know you can just put the music into categorized folders in windows explorer, but that doesnt allow you to have the same song in more than one playlist unless you copy the music file. I dont think it would be very hard to do, just save to some file that stores the file name and location of each song. then upon importing the playlist, it could scan the saved location for that file and add it to the playlist if its there, and if not it could ask you what other folder it should scan in for that song. I think this would be very beneficial for people that create many large playlists that would take hours to recreate.
Thanks for your help,
Adam

[newsreader autoquote deleted by forum host]
I assume you have installed the latest drivers for the card? I have that
card and dual monitors with no problems. By the way, go to the NVIDA
site and download the drivers, not the Sony site as some do. There was a
new version of the driver just last month.
John Passaneau

Input Monitoring, and Audio Objects- help?

Hi!
First part:
Input Monitoring. I am used to Input Monitoring (live signal) overriding printed material (regions). I thought that if I had Auto Input Monitoring disabled, and if I would engage Input Monitoring on an Audio Track, ONLY the Live input would pass; any regions on the track would not sound...put simply, engage Input Monitor flicks a switch from regions to Live Input. But, it does not. The ONLY ways I have found to have JUST the live signal is to mute all regions, or actually record on the track. How SHOULD it work?
Audio Objects and Arrange tracks:
If I have 3 audio tracks in the Arrange window, and I assign them all to say, Audio Object 1; why do the Arrange window audio tracks not operate independently? If I solo one, all three solo. If I mute one, they all do. Even worse, if I Rec enable one, all three do!
I thought that Arrange window Audio tracks were independent, and operated as such. Assign tracks to multiple Audio Objects, or to the same, it did not matter. Part of the brilliance of it (I thought, initially) was how you could have different "versions" of a track feeding a single Object, and then priority would determine what actually plays back; but that is not how it works? Part of my delusion, it seems, was that when you mute or solo a track in the Arrange, there is a pause, and if I then do so in the Mixer it is much, much faster, which is due to the Arrange tracks being different...or not? Seems the answer to that incurs a penalty in one case, but not another, and that makes NO sense. Where did I go wrong?
Sorry for the wicked long post, but I see these both as related, and I would love to know why this stuff looks incredibly flexable and powerful on paper, but in practice, it is nothing short of frustrating, with very little benefit over other apps...maybe worse than some other apps...

Hi!
Thx for the reply! I seem to be find the odd questions...
Sampleconstruct wrote:
Click on the track with the regions you want to solo/mute->all regions in that track get selected->use the keycommands for Solo (S by default) and Mute (M by default). Then only the highlighted regions in that track will play/mute
That works well, and I could handle using it as a workflow. But, when one wants to retain individual mute states of specific regions on that track, this would alter that when unmuting. The tip below would be a viable alternative, but...
Sampleconstruct wrote:
Also have you tried the two different modes for Solo/Mute which can be set in Logic Audio Prefs? "CPU save mode" makes the tracks assigned to the same Audio object independent from each other - "Fast"-mode makes them all dependent, so try CPU save mode.
That I did not realize. However, if I rec or input enable, no matter what ALL Arrange tracks assigned to the same Audio Object rec/input enable. Any way to stop that that? Or is that just an "idiot-synchrocy" of Logic 8? (coulda sworn 7 did not do that?) Take recording is cool, but sometimes I might want to have alternates on a seperate track. It seems to defy the reasoning behind addressing Audio Objects...

Input monitor

Input monitor is not working. Im using a M-Audio FireWire Solo. The guitar records fine and plays back fine but I cant monitor it as I am recording or hear the levels. I have checked the 'Input Monitor' box and have core enabled
Jon

I have tried everything to get the input monitor to work but it still wont work. If there is anyone that can offer suggestions that would be great. I failed to notate in my first question/comment that I am using Logic Express version 8. thanks.

Input monitoring echo problem

An unusual occurrence happens 40% of the time when a new track is initiated. A new Audio track, while monitoring the input signal on a dry guitar with or without plugins on the track, will exhibit a single echo on every note played. At first I though it to be latency, but the timing is relatively long between note and echo. To fix I have to close the song then re open.
Any thoughts or fixes.
Thanks

I have a similar problem, although I'm on Logic Pro 8.
I can't seem to record my guitar track (mic'd cabinet) without having the result monitor back through my studio monitors unless I turn off software monitoring in Preferences/Audio. But then if I want to record keyboards direct and listen to what I'm playing, I have to go back in and turn the option back on.
In Sonar on the PC, this was much more intuitive. You could arm a track for recording by clicking the "R" button, and separately toggle monitoring on and off by clicking the little speaker button to the right. You didn't have to constantly fiddle with the program preferences.
I have a FireWire410 interface, and the monitoring only happens when Logic is loaded. I would have thought that the little "I" icon was to turn monitoring on and off, but it's some "pre/post-tape" toggle I can't find a use for.
Kevin, how did you control your monitor mix before?

LogicX Rec Problem. I can't hear while recording no matter I turn on Auto Input Monitoring at menu or channel. On certain songs I could thru AUX to REC, my L7/8/9 procedure. Now, inconsistent, not work. Any help?

Logic X Recording Problem
I can't hear (ex.) voice back while recording no matter I turn on Auto Input Monitoring at Record Menu or Channel Strip.
On certain old projects I could when thru AUX to REC, which was my L7/8/9 procedure.
Recording takes place on a consolidated session, all audio tracks with no latency, which actually happens only it can't be heard.
Monitoring is very inconsistent and in fact doesn't work at all. Any help?
Mac Pro 2010 2x2.66 12 Core 32GB OSX 10.9.5 SSD 480
Recording on HD 1TB, Fireface 800

Correction: actually "thru AUX to REC channel" is not effective.
It's just that I can input monitor thru an extra AUX channel independently of the REC channel.
Sending the source to be recordered to aux and audio rec at same time.
Mac Pro 2010 2x2.66 12 Core 32GB OSX 10.9.5 SSD 480
Recording on HD 1TB, Fireface 800

Silent feedback from microphone after pressing the record ready and or input monitoring buttons

Hi Community,
So I am running a microphone(xlr cable)-->mbox mini--->macbook and have been able to successfully record many songs in the past. Just recently I have run into an intersting issue which I hope someone can provide a solution to.
When I hit the ready record button or the input monitoring button my level automatically shoots up about a third the volume bar without me even singing into the mic (My monitors are muted and I am wearing headphones). After recording, the wavform looks like there is a thick bar on the top half. I can still hear vocals but they are very faint, unlike how i used to get a clear, quality sounding recording. My input on the interface is also at about halfway and my phantom power is on. Here are some pictures to give you a better understanding of what I am looking at.
I hope this is clear
If ANYONE has a solution to this issue please let me know
-J

Trying another interface is probably the next step. I would also make sure the Mic is ok, do you know anyone with an interface or mixing board that supplies phantom power? Make sure your cables are good, a shorted mic cable can blow an interface op-amp in less than a second. The Mini may have blown on it's own, as I recall the mBox series did have some problems along those lines.
The general rule with phantom power is, do not plug (or unplug) any device with it on, this holds true for the interface into the computer or to XLR->Mic / XLR->Interface. After turning off phantom power I usually wait at least 15-30 seconds to let voltage drain from the circuits before starting to remove cables...etc.
As you can tell, I'm on the cautious side when it comes to phantom power and mics/mixing boards, I worked at a studio that had mics valued at $5,000 - $10,000 and a mix board that cost far beyond that... always play it safe.

Has anybody gotten this popup error message: ASI Eve CL Monitor has encountered a problem and needs to close

Has anybody received this error message: ASI Eve CL Monitor has encountered a problem and need to close?
== This happened ==
Every time Firefox opened
== Don't know

I don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors.

New eMachine w/Windows 7 and HP f1703 monitor problem

Truly fed up at this moment, and not really tech savvy, but will try to be brief with problem:
Had an HP Pavilion a767c which came with f1703 monitor - purchased around 2005 or so ... ran great, no problems, monitor functioned beautifully. Had some storms come through area about 2 weeks ago, lost power several times, a767c started acting up (shutting itself off at night, but would come back on ... finally died, went through all the diagnostics, yesterday decided to purchase new controller, got an emachine at Best Buy, want to use HP monitor).
About a minute into boot, f1703 changes from a "starting Windows" message to a "PC video resolution setting out of range" moving message ... never comes up to Windows desktop screen. If I plug in an older CRT type monitor, everything comes up fine. Have checked Control Panel, shows emachine hooked up to generic monitor ... found resolution settings, they are set for the 1280 x 1024 and made sure was at 60 Hz. Just went through the diagnostic procedure here on HP for message during boot ... do not get any OSD when Menu button on monitor pressed ... I don't believe we've EVER pushed/accessed this feature in all the years we've had the monitor ... so I'm stuck at this point in going through diagnostics.
Any help greatly appreciated.

Dave, so sorry, but telling me my monitor is "VGA only" really isn't helping my confusion (original post did state I'm not too tech savvy). I had my stepson (who is more tech savvy) work with the link you provided previously to download updated driver info from Intel. Here is a rundown of everything we worked on yesterday with this beast:
As a recap - if I hook up the f1703 directly to the emachine (video port states HDMI on back panel) and boot the machine, get the normal starting boot display and also a "Windows starting" display ... before the desktop screen comes up, the monitor goes into an error message stating resolution not set correctly at 1280 x 1024 @ 60Hz. From that point, I never get to the desktop, the monitor is basically frozen. emachine is running Windows 7 64bit.
Pressing F8 during boot will allow me to get into Safe Mode, but in Safe Mode I can't download anything, and I'm very limited in what I can/cannot change.
If I hook up an old CRT style monitor FIRST and boot the emachine, everything comes up normally ... I was able to find the HP f17093 driver in Windows 7 and get that driver set up with the 1280 x 1024 @ 60Hz resolution. AT THAT POINT, if I unplug the CRT and plug in the f1703, I can use the computer normally and the display is excellent ... so to my way of thinking, there has to be an issue with some video command during boot that is sending a false signal to the monitor. Make sense???
I hooked the f1703 up to a different emachine (also running Windows 7) and I have the exact same problem ... locks up during boot before desktop screen. For the heck of it, I'm going to try hooking the monitor up to a Sony Vaio laptop running Vista later tonight to see what, if anything, I get with that.
Downloading the updated driver info from Intel really didn't accomplish anything positive ... although the Intel site stated there was updated drivers available, after downloading the emachine had picked up some kind of generic flatscreen driver to use and same issue existed, so that's not what's doing it.
Oh, one other thing: after getting the complete boot on the CRT, then switching plugs to hook up the f1703 I was able to access the monitor's OSD menus ... went through and reset to factory settings ... no difference ... monitor still hangs during boot when hooked up first directly.
Dave, when you said VGA only, are you trying to tell me the output on the video card is not correct for the f1703 monitor? Sorry, I just don't understand the HDMI stuff (what that is in layman's/idiot's terms). Do I have to have a different video card? Adapter?
Thank you both (CherylG and Dave) for your patience and assistance ... this is just so frustrating. I used to understand alot more back in the DOS/CPM days.

Problem with action script 3 make input text box and button....

Hi every one I am trying to make a family book using "Air for Android" with a simple search engin in the book
air for android only work with AS3,
the search function is to type a person's name and hit submit then go to a specific frame.
have a problem making below code to work in AS3 and hopefully one of you guys can lead me in the right direction to fix the issue.
Currently, I have an input text box and a button. When you type specific words into the input box and then hit the button it sends you to a specific frame.
(it work find in AS2 but not in AS3,)
Here is my current code that is placed on the main timeline, first frame:
stop();
onEnterFrame = function () {
    submit.onRelease = function() {
        switch (yourname.text) {
        case "name1" :
            gotoAndStop(2);
            break;
        case "name2" :
            gotoAndStop(3);
            break;
My button that checks if the phrase is correct is called "submit" and my input box has an instance of "yourname".
My phrases that will be accepted in the input box are "name1" and "name2" which bring me to two different frames.
Basically, I'm having a problem with making this to work with AS3.

you should use the default option in the switch statement
that way yourname contains something not in one of the case statements it will go to the default bit and execute teh code there
function onSubmit(e:MouseEvent):void
                              switch (yourname.text)
                                        case "name1":
                                                  gotoAndStop(2);
                                                  break;
                                        case "name2":
                                                  gotoAndStop(3);
                                                  break;
                                        default:
                                                  goToAndStop(you frame you want);
                                        break;

Monitor problems with Mac Pro and Leopard

I can't turn energy saver off.I have two LCD monitors connected, one 19" Viewsonic VX924 and one 30" Dell3007WFPHC . I set energy saver:Put the display(s) to sleep when computer is inactive for Never.
Yet I can turn the monitors off and back on later and it's put the Viewsonic to sleep ,but not the Dell.
I then open the energy saver system preferences again and low and behold it's changed itself back to sleep at 26 minutes.Ghost in the machine?Why doesn't it put the Dell to sleep as well?????Why does it keep changing back to 26 minutes regardless of how many times I set it to never and lock it?
I even tried just using the Viewsonic only and setting to never,I also trashed a pref file I thought was energy saver , still same behavior, this is a REALLY big hassle ,because I have to restart every time just to get this monitor back up.
Any clues?
Many thanks!
Hayes
Memphis,Tn.

I think there are some powermanagement prefs in your account and in /Library but I also read of problems with ViewSonic VX back when the Mac Pro came out in 9/06.
I would give the SMC button a good 'kick' and see if that helps.
And when you restart, this is normal safe restart, or forced?
SMC button, this is restart button on the inside of the mac?
It's always a safe restart,the whole computer doesn't go down, it's just the viewsonic power light blinks on and off and there is not much I can do to get back up quickly, but restart. I have played with display settings and got it back before, but that's hit or miss and very time consuming.
Thanks you so so much for your help and suggestions!

M93p dual monitor problems; monitor turns off and cannot be turned on again

Hi,
we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5) keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
Maybe there is something wrong with DVI power/DVI signal?
- Monitor independent, as far as I can see
- Independent from Windows energy saving modes
- BIOS updates did not help
[todo]: Try Intel/(AMD?) drivers, let users test.
I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/Dual-monitors-problem-VGA-and-Displaypor... is related.
Anyone?
Thx

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

LPX input monitoring problem, and varispeed

Similar Messages

Maybe you are looking for