LPX issues with LR, BFD, and the GUI looks like Garageband now...

I downloaded LPX a few days ago. Everything worked fine except BFD Eco, which is what I use almost exclusively for drum samples (primarily demo work at this stage).
I also bought an iPad Air per rave reviews of the LR app. Got that setup, and it worked, but as with other users on the forum here, it started to crash on me within moments of turning it on and pairing it with LPX. So I searched the forums and found someone who was advised to delete the .plist files under ~/Library/Preferences, then restart the machine. They were also advised to delete any old .plist files from a previous version of Logic, which I also did.
[Back story: I bought the AC7 Core app a couple years ago to try and perform transport functions from my iPhone. This app "tricks" logic into thinking it's a Mackie interface, so I figure that somewhere during the install, Logic got really confused about my using a Mackie controller which is interfering with my use of the iPad LR app. Other people are having the same issue... seems like a solid bet, right?]
So I deleted the following files:
com.apple.logic10.plist
com.apple.logic.pro.cs
com.apple.logic.pro.plist
And now LPX looks like Garageband. Check it out:
It has those crappy wood panel bars on the left and right, I don't have access to the mix window, I can only see channel strip plugins by using the inspector... this is weird! Which file did I delete that could have caused this? Or am I missing something else?
Additionally, LPX prompted me to download additional Drummer kits AFTER I went through the whole "download additional content" process, telling it to DL anything I didn't already have.
This was all a wild goose chase to reduce latency from my iPad Air to LPX. It can automate faders and sends fine, but playing drum pads and keyboard lines has a noticeable delay (about 50-100ms). So if anyone is willing to help fix the GUI, it would also be super nice if you could give me some pointers on reducing latency & improving stability with the LR.
In case anyone's interested, BFD Eco is still not functioning properly. Bought it in 2011 and apparently I need the 64-bit version. Purchased from fxpansion and now my machine can't find the install script file to actually upgrade my license. eesh.
Nick

Nick,
To get out of GarageBand mode, open your preferences, go to the Advanced tab and be sure to tick "Show Advanced Tools."

Similar Messages

I have a problem. I take photos with camera of my iPod touch 5 with the effects that comes in the iPod and now when I look to my photos I see that the effects go out and the photos looks like I didn´t put the effects. What is that? How can I solve it?

I have a problem. I take photos with camera of my iPod touch 5 with the effects that comes in the iPod and now when I look to my photos I see that the effects go out and the photos looks like I didn´t put the effects. What is that? How can I solve it?

Try:
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Are there any issues with itunes where as certain windows looks like a PC in safe mode?

are there any issues with itunes where as certain windows looks like a PC in safe mode?

Check your trash. I had some old uninstalled files in there. Deleted and restated itunes. seems to work.

Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

screen look on

I just bought an iMac. It was to come with pages, numbers, and the presentation software (like power point). I can't find these programs.

I just bought an iMac, It was to come with pages, numbers, and the presentation software. I can't find these programs.

Have you checked your Purchase and Updates at the app store? You will usually need to accept them and then download/install. If that does not work, you can follow these instructions:
http://www.apple.com/creativity-apps/mac/up-to-date/

Issues with Car Bluetooth and the 9630

Hey guys,
Over at the crackberry forums there are many people reporting issues with the tour and car bluetooth. Basically, for people that are syncing the tour with the bluetooth in their cars, people can barely hear them. We can hear everyone just fine, but when talking the person on the other end reports that our voice is very low. This is happening on VZW, Sprint, Bell and Telus, which leads me to belive this is an issue with the OS itself. The link to the discussion at crackberry is http://forums.crackberry.com/f141/car-bluetooth-tour-issue-they-can-t-hear-me-well-267206/ I'm hoping someone from RIM cam comment on this or provide some help. This is a VERY frustrating issue to Tour owners especially with so many places having "hands free" laws.
Thanks!

Greetings from Charleston!
I was using a Verizon 8830 World Edition until I upgraded to the Verizon Blackberry Tour on launch day July 12. I never had any Bluetooth issues before and I'm not having any now. As a matter of fact, I would say the quality is a tad better. My volume is controlled by my car when the Blackberry is connected via Bluetooth and I've actually had to turn it down sometimes because it has been so loud. I drive a 2007 Toyota Landcruiser. I suspect it has less to do with the Blackberry than it does with the car. Perhaps there's a Bluetooth software/firmware update necessary for some of your vehicles?
All in all, I love this new Blackberry!!
Cheers!

Issues with Captivate 5 and the Audio Editor

I downloaded the trial for Captivate 5 (I previously used Captivate 4) and I am disappointed with the recorded audio editor.
(Please excuse the incorrect terms that I might use.) In Captivate 4 when editing recorded voice, the sound waves were bigger so editing them to remove breaths was easier. Now the sound waves are so small (even after adjusting the Zoom to 100) I cannot really see the breaths to insert silence.
Also, I am constantly having adjust the volume and increase the dB level to make the audio louder and easier to hear, which I did not have to do with Captivate 4 (and I am using the same equiptment and set up). It seems as though Cativate 5 is softening the recorded voice and I don't need that.
I feel like Capticate 5 has lost functionality the with the above when sound editing, which doesn't seem right to me. Is there a way to fix these two issues in Captivate 5 so it functions more like Captivate 4?
Thank you,
Amanda

I agree. I much prefered the Captivate 4 functionality and would like to see some iprovement in CS5.

IBook g4 stuck on start up with gray screen and circle that looks like its downloading

iBook G4 stuck on gray startup screen with circle like it's downloading

If your iBook G4 portable running OS X 10.5.8 or 10.4+
shows a grey screen on startup or other similar variant
to the failure to fully start, there are a few good Support
articles from Apple Support site online that may help.
Each has information to read through, consider, & try.
•Mac OS X: Grey screen appears during startup...
http://support.apple.com/kb/ts2570
•Resolve startup issues & perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
This is akin to troubleshooting since you have a measure
of trial-and-error to resolve the problem; & at times there
may be more than one thing to do, &/or more than once.
Hopefully this helps.
Good luck & happy computing!

Having issues with IP Phones and the RV042 Router

Hello,
We have recently purchased Ring Central IP Phones and are having audio issues. We have a RV042 router with two WAN connections. We called Ring Central Tech support and were told that IP Phones will not work with the RV042 while loading balancing is enabled. Has anyone ever successfully setup IP Phones with a RV042 router while having loading balancing enabled? I configured the port range that the IP Phone use to be bound to WAN 1 but still having problems. Thanks in advance.
Loren

I Have the 5s but my screen keeps freezing up and I have to force restart on my apps!

Having issues with netgear genie and air play with iOS 6

Is anyone having issues with netgear genie and the fact they can not AirPrint with iOS 6. Any solutions for this

The list of AirPrint supported printers is here:
AirPrint Basics
Netgear Genie is not on this supported list so it is probably best to contact Netgear.

"Copy to clipboard" issue with Acrobat X and Skype extension in Firefox

This post is just to let you know that there is and issue with Acrobat X and the Skype extension in Firefox.
I don't know why but when both programs (Firefox and Acrobat) are opened and I try to copy something from a PDF I always get an error
message like "Impossible to copy into the clipboard. An internal error occurred".
If I close Firefox or I disable the Skype extension for Firefox everything runs smoothly.
It is really odd, I don't know if it is a problem of Acrobat, Firefox or of Skype....
Are anyone experiencing the same problem?
See you.
Alessandro.
Ps. I'm using Windows Vista SP2, Skype extension 5.2.0.7165, Acrobat 10.0.1, Firefox 3.6.16

Just found your post after getting the same problem with Google Chrome and Adobe Reader 10. It doesn't happen all the time but is annoying. If I switch Chrome off the problem is cured. Switch it straight back on and the problem reappears. It has only started after Skype was installed. Thanks for posting - I'll just switch Chrome off for now when I want to copy and paste unless a fix appears.

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

Hi BC,
I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
This is causing us mayhem.
We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
Jo

Hi there,
The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

We are just users like yourself. If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
I have a 27" & do not suffer from such a problem. You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.
Think of these forums as a hospital emergency room.

LPX issues with LR, BFD, and the GUI looks like Garageband now...

Similar Messages

Maybe you are looking for