LR 1.0 not rendering photo in Loupe View

I can work with LR fine for some time and every now and then the application stops rendering the Loupe view.
It is possible to get back to the grid view but when i double click on the image to get the Loupe view it switches to the Loupe layout but doesn't render the image.
This has happened both in the meta data browser as well as the folder view.
Resolution has been to restart LR.
Operating system, Windows XP Media Center Edition with all the latest patches.

Oh sorry about that. yes, it's Windows XP. The betas installed and ran perfectly but the uninstall was pretty flawed and now I cannot install the commercial package.
I tried both manual and automatic cleansing of the registry to no avail. I would reinstall the beta if I had the binaries but I don't so I'm not sure what to do from here.

Similar Messages

Not Rendering Photos

I have a 2 minute project that is pretty simple. I have about 8 photos that scroll. 3 of them do not render in the final output, but the rest do.
My text on above the images render just fine. I have no idea what is causing this. I haven't done anything to them differently than the ones that show up.
Any ideas on what might be causing this?
Thanks.
- CM

I've checked and made sure everything was RGB in photoshop. Even changed the size by a pixel and resaved all the photos as jpg. Yes, I am using one camera. Now when I render I still get one that doesn't show and another flickers very fast.
What in the world?

Help is not rendering correctly in Portrait view on a Tablet

I'm making the Help from a Frame12 file, using the Responsive HTML5 format. Viewed in Portrait orientation on a tablet, the page is just blank. On Landscape view, the information appears, but isn't scrollable past the first view.
I have searched through all of my settings, and nothing comes up. Any thoughts about what I need to tweak?

I have moved this post the HTML5 Layouts forum.
I think it might be that you are using an early version of the layout. Hopefully someone can confirm that.
Meantime try another layout or try deleting the layout from your project and then create a new layout and select the same one from the Gallery. I believe that gives you the latest version of the layout.
Not sure but hope that helps.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Design view of jspx not rendering : Error exercising tag : afh:head

I'm using JDeveloper 10.1.3.4 and I have an intermittent problem where by the jspx does not render correctly in design view - it just shows a whole load of nested boxes.
By following a suggestion from another website I turned on "Design time messages in log" in jdeveloper JSP visual editor preferences.
The error messages being sent to the log window are :
Error exercising tag : afh:head
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.renderkit.AdfRenderingContext.getTranslatedString(AdfRenderingContext.java:70)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.jsLibs.GlobalVariablesScriptlet.outputScriptletContent(GlobalVariablesScriptlet.java:49)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.jsLibs.Scriptlet.outputScriptletImpl(Scriptlet.java:111)
Error exercising tag : af:forEach
javax.servlet.jsp.JspTagException: 'begin' and 'end' should be specified if 'items' is not specified
     at oracle.adfinternal.view.faces.taglib.ForEachTag._validateAttributes(ForEachTag.java:320)
     at oracle.adfinternal.view.faces.taglib.ForEachTag.doStartTag(ForEachTag.java:93)
Error exercising tag : afh:body
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.renderkit.core.CoreAdfRenderingContext.getStyleClass(CoreAdfRenderingContext.java:211)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.XhtmlRenderer.renderStyleClass(XhtmlRenderer.java:338)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer._renderLibraryDownloadElement(PanelPartialRootRenderer.java:480)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderPPRSupport(PanelPartialRootRenderer.java:340)
How can I fix this ?
Cheers,
Brent

Hi Didier,
Sorry, intermittent problem is not very descriptive ! What I actually meant is that some of my applications have the problem while others dont. Once the problem exists, it always does regardless of restarting JDeveloper.
Starting JDeveloper using the console provided similar error message to outputting the JSP visual editor to the log file :
SEVERE: Element End name:head does not match start name:script
04-Dec-2009 17:28:38 oracle.adfinternal.view.faces.io.HtmlResponseWriter endElem
ent
SEVERE: Element End name:html does not match start name:div
Reading other posts, problems seemed to stem from errors within the faces-config or web.xml files so I compared them between apps displaying pages correctly and ones that weren't. I found a difference in the filter-mapping section of the web.xml. Changing the entries to match the applications that displayed correctly has worked !!
The entries for the apps that didn't display correctly :
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <servlet-name>Faces Servlet</servlet-name>
        <dispatcher>FORWARD</dispatcher>
        <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jspx</url-pattern>
    </filter-mapping>
<filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>ordDeliverMedia</servlet-name>
</filter-mapping>
<filter-mapping>
    <filter-name>jhsAuthenticationFilter</filter-name>
    <url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
    <filter-name>jhsAuthenticationFilter</filter-name>
    <url-pattern>*.jspx</url-pattern>
</filter-mapping>... and the entries for the apps that did display correctly :
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <url-pattern>*.jspx</url-pattern>
        <dispatcher>REQUEST</dispatcher>
        <dispatcher>FORWARD</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jspx</url-pattern>
        <dispatcher>REQUEST</dispatcher>
        <dispatcher>FORWARD</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <servlet-name>ordDeliverMedia</servlet-name>
    </filter-mapping>
    <filter-mapping>
        <filter-name>jhsAuthenticationFilter</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>jhsAuthenticationFilter</filter-name>
        <url-pattern>*.jspx</url-pattern>
    </filter-mapping>Somehow the filter-mapping entries for the adfFaces and adfBindings filter got all screwed ? Strange as the application has always worked fine, the only (obvious) problem has been the jspx pages not rendering properly in design view.
Once updating the web.xml with the correct value for these two entries, the pages are displayed correctly :)
While I don't like blindly making changes like this to the web.xml - the application still seems to function !
Cheers,
Brent

Mac 10.5.7 update has made golive 9 stop rendering css in layout view

Has any one else on Mac with the mac 10.5.7 update have new issues with golive 9 not rendering css in layout view. It works still in pdf preview and if I boot to 10.5.6 all is normal again. Also in the live rendering engine it works as well...just not in layout view- its very disconcerting. Any workarounds? anyone else with this issue?
thanks
Adam

I have been using an external CSS file simply for defining font styles
site wide. The rendering of them on screen in layout view is now just
the plain default font prior to showing the CSS altered version of it.
Sorry, I'm not sure I understand what you mean here. You mean it shows your text in the default and *then* renders it correctly using the CSS after a delay?
I tried torching the prefs...perhaps I did the wrong file...what file is to be deleted?
~/Library/Preferences/Adobe GoLive 9.0 Prefs
~/Library/Preferences/Adobe/GoLive/Settings9 (a folder)
~/Library/Preferences/com.Adobe.GoLive.plist
Move them out to, say, the Desktop. If they are not the cause of the problem, put them back replacing the newly-created versions.
I cloned my os prior to the update and all was fine. Rebooting to clone
css renders normal...but in 10.5.7 its not rendering in layout view.
I'm not seeing the same thing here with GL9/OS X 10.5.7, so it may be its something specific to your particular update. You might also want to consider doing a re-import of the site to recreate the site file and see if that helps.
John

Colors not rendered correctly in Photos

The Photos app is not rendering colors correctly. I just downloaded the Loom photo organizer app, which accesses photos from my iPhone Camera Roll. As I was using Loom to scroll through photos on my iPhone Camera Roll I noticed that one particular nature photo displayed vividly, the way I remembered it when the photo was taken a few days ago. The image was of a large grove of golden aspen on a mountainside in Wyoming. I had viewed the same photo using the Photos app and thought the yellows looked muted but assumed that the colors had been affected by the glass car window, through which the original image was taken. Curious, I compared architectural photos I took in Denver earlier today and noticed the same thing. Colors were presented correctly by Loom, but yellows were not expressed correctly in the Photos app. Neither of these photos had been edited in any way and both were taken in natural light. The architectural shot was not taken through glass.
I looked for a color correction or color balance setting on the iPhone, but did not find one. My iPhone dsplay hardware seems fine, again, becuase Loom presented the colors correctly.
I am curious if anybody else has noticed this and also wonder how I might notify Apple.

Now I understand the problem described in my post, above. I don't know how it happened, but a "Fade" filter was being applied to all of my recent photos in the Photos app. When I selected "None" in the filter menu, the yellows were expressed properly. Again, I don't know how this happened. Older photos did not have the Fade filter applied. I'll have to pay attention to this in the future.
But, if you want to reduce the yellow in your outdoor photos, the Fade filter works well.

Loupe and Grid view rendering not as good as Develop view.

I recently see that while using LR 5.6 the images rendered in the loupe and grid views do not look nearly as good as the same image displayed in the develop view. I have screen grabs if you'd like to see them below. The Loupe and grid are not as saturated and the gradient in the sky is not nearly as smooth. If I bounce between 'E' and 'D' it is pretty obvious. Once in a while the 'E' (loupe) view looks the same. I'm afraid that I will delete an image based on what I see in the Loupe or do unnecessary edits on an image. When I exported to jpg, the images looked pretty good.
Grid:
Loupe:
Develop:

As far as what could be contributing to a difference, other than an actual bug:
LR Previews are stored as AdobeRGB JPGs, so Library previews go from LR-Internal color profile to AdobeRGB to Display color profile, whereas Develop previews go directly from LR-Internal color profile to Display color profile. If there are some colors that are outside of AdobeRGB then some conversion may occur. The conversion to 8-bit JPG is also probably adding banding that Develop wouldn’t show. There might also be Relative vs Perceptual color profile conversion differences occurring. I don’t know the specifics of which is used for the Adobe color profile conversion and whether what you’re seeing is outside the expected variations.
If you view at less than 1:1/100% zoom, especially with Fit or Fill, then small details that vary across the group of original image pixels that are displayed as one display pixel can be averaged differently due to differences in the downsampling algorithms used between computing Library file previews and computing Develop display previews where Develop’s is built for speed because it occurs in real-time after every slider movement, where Library previews are computed in the background and so can use a more accurate resampling algorithm. Usually this is only a difference in sharp/smoothness but it can also manifest as a difference in tone if there are lots of tiny noise spots getting averaged together inaccurately in Develop or more accurately in Library.
Since I can see only a tiny difference between Library and Develop on my monitor in this particular example, I can't imagine that small difference is enough to reject the Library version and accept the Develop version. Maybe you're seeing others with more differences?

LIbrary thumbnails not rendering

I have dozens and dozens of thumbnails in library grid that do not render. The boxes show up as empty grey squares with keyword icons among others. There does not seem to be any pattern or reason that some photos render fine and others do not. If a photo is taken to develop mode then the thumbnail renders as the photo loads in the main window, otherwise the same photos that are all grey in library view are grey in develop view until the individual photo is loaded. Closing LR and reopening it seems to cause any photo which was originally not rendered but then forced to render in develop to go back to the unrendered state.
This is driving me crazy as I cannot count on LR to display the images I have in the catalog. Syncing a folder which has many of these unrendered previews does not indicate any missing files.
Help.
Lightroom 3.2 64 bit
Windows 7
Catalog w/ about 18000 images upgraded from LR 2.7

Check other threads in this forum. I recall this is usually caused by a bad display colour profile. This is apparently more common with some Windows systems.

Slideshow transitions not rendering

On a disk with 5 slideshows, the transitions were not rendered for the latter part of a single slideshow. Those transitions were "green screen."
Hard drive has over 25 GB free.
Everything else seems fine.

There has been a problem in slideshows with more that 99 images. Slides in a slideshow are treated as chapters, and a sloideshow s a track. Tracks are limited to 99 chapters and until iDVD 6, all iDVD slideshows were limited to 99 slides. Apple crated somethong of a 'hack' in iDVD 6 that makes it possible to link together several tracks creating a slideshow of more than 99 images. The problem is, not all DVD playrers like the hack and fail/refuse/have problems in trying to play long slideshows.
As far as the image quality,DVD are low resolution devices. NTSC DVDs are less than 0.3 megapixels. See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html for suggested images sizes to be used in iDVD slideshows.
For long slideshows, create them as movie in iPhoto or iMovie. Many of us like Photo to Movie or FotoMagico (which I use).

When publishing video files in H.264 format, I get the error "No rendered photo exists on disk"

I want to export images as well as videos (.mov files) by using the Publishing Manager in Lightroom 5.6 under Windows 7, 64 Bit. For this I activated "Include Video Files" in the Publishing Manager and set "Video Format" to "H.264". When publishing, all photos are correctly published. The videos, however, are not published. Instead Lightroom returns the error: "Some export operations were not performed.", "No rendered photo exists on disk" followed by a list of the videos that could not be exported.
If I select "Original, unedited file" for "Video Format" instead, the videos are published. Also, if I manually export the videos (without using the Publishing functionality), the export works.
How can I publish videos using the H.264 format?

Thanks Brett, I'll try to recreate it
I just tried to export it again but this time to the desktop, not a Sandisk USB, and this time it created 4 different files, one being audio only and when I tried to play/open the others it gave a 'server error' dialogue window and I couldn't get a screen shot while this was open.

Ken Burns Effects not rendering

I am having isssues with Ken Burns effects not rendering. I have no iMovie 3rd-party plug-ins. I select the timing of the effect and hit apply and the photo clip hangs and will not render. Anyone else experiencing the same issue or have a fix??
Thank you.

I have discovered the issue. It wasn't 3rd party plug-ins, but a Quicktime plug-in entitled "QuartzComposer.component". After removing, Ken Burns effects rendered as planned.

Email Photo option Greyed out in Loupe View in Library Module on Mac in Lightroom 5.7.1

In Lightroom 5.7.1 on Mac OX X Yosemite, when in the Library module, in Grid View the option to Email photo is available; however, when in the Loupe View, the Email Photo menu option is greyed out. I have seen this question posted on the web and there are no answers anywhere. Please address this issue as soon as possible since this appears to bug.

Hey Scott,
After expermienting extensively (well relatively speaking), I found that hardware wise, there needs to be a AC3 decoder on the end where the audio is being sent. And without that chip there the AC3 option won't work weather or not you can get it showing. Our interfaces don't have this AC3 option so theoretically speaking we would have to create/purchase an AC3 to Analogue converter, and take the outs to our monitors/inputs of our interfaces. There seems to be no easy hardware or software work around, because even if the software workaround were to get the AC3 option available it seems that it sends the AC3 option out over the SPDIF/ADAT connection meaning the software didn't really convert it it just made it possible to send the signal. So I didn't have any luck. In the end it seems you need a AC3 decoder/DA converter to 5.1 out which they sell but not at a reasonable price. Hope I was of "informative" assistance, if not any actual help towards solving the problem.
-Walter

'Sorry, Too Many Cards' message NOT rendering correctly

I'm seeing the 'Sorry, Too Many Cards' message not render properly for me on Palm Pre 1.3.1. I rebooted the phone and was able to reproduce the problem by opening up many cards. I have uploded a screenshot: http://img188.imageshack.us/img188/6525/browser20091511171212.png
As you can see, the 'OK' button is not rendered correctly. If I remember correctly it supposed to be a green button? Also, the right side box is supposed to have an icon or something. I've never seen this error message NOT rendered properly before 1.3.1.
BTW, like others have posted - once I get to a memory threshold I can't even open up core apps - like 'Device Info' (in case I needed to reboot the phone). I would have expected some high availability on these apps w/r/t memory management.
I would upload more debugging information if I knew how on the Pre. But like I said I was able to reproduce on 1.3.1 before and after a reboot.
Thanks,
Post relates to: Pre p100eww (Sprint)

lblumen wrote:
Am getting same message. Since new update was downloaded. Also, I am getting the too many cards open message daily, even when no other cards are open
I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

JSF Pages are not rendering correctly when loaded using Non JSF actions

Hi All,
This problem is irritating me and I am posting the same query for the third time here.
When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
How to resolve this issue?
or
Is this Bug of Sun's Implementation of JSF Framework.
Thanks,
Sudhakar

Hi Sudhakar,
There is a discussion about refreshing a page, Take a look at the below thread
http://swforum.sun.com/jive/thread.jspa?threadID=55660
Hope this what you are looking for
MJ

I still need help. i am technically challanged. i up graded my phonr to a 5 s. i backed up my phone on icloud. i cAn not get my notes or photos. it looks like the icloud email address is wrong. how can i change it or get my missing items

I need help. I am not good with technology. I upgraded phone today to 5 s I am missing notes and photos it looks like the cloud address is not correct. Any suggestions

Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

LR 1.0 not rendering photo in Loupe View

Similar Messages

Maybe you are looking for