LR 1.2 Photos could not be opened.

It was working fine. Then all of a sudden under the Library menu on the right tab Histogram and Quick Develop won't highlight, next under the Develop menu I get "the file could not be opened" and the right tab completely stays faded out. I the used TechTool Pro, permissions, LR optimization, restarted the computer and no luck.
Now I don't know if this has anything to do with it or just coincidence, but it all happened after I installed "iLife 08" and did an apple auto update for it.
Even so, I re-installed the LR 1.2 update still nothing.

"Sounds like a nasty Apple move, to me."
You could think so. But I think it is to minimize the support calls to apple support.
If you consider that the average iPhoto user might be far from a Mac Power User.
They probably don't care/know were their images are on the drive.
Maybe they shoot a couple of images every week, to a few hundred, all in jpeg. So it's no problem to make them fit on the local drive.
And if they only can access the image from inside of iPhoto once they have been imported they can't move them around or accidentally delete them in the Finder and wonder why they can't look at their images in iPhoto anymore.

Similar Messages

  • How do i solve The photo could not be opened, because the original item cannot be found

    How do i solve The photo could not be opened, because the original item cannot be found

    The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

  • Photo could not be opened, because the original item cannot be found

    I've drawn a blank. This error message gets touched on in places, but I cannot find a direct answer.
    I have never used iPhoto.
    After installing and without changing any settings, I got to import folder.
    I select my photos folder and begin to import all my photos.
    Every single photo of the 3500+ pops up the error:
    "The photo "xxx.jpg" could not be opened, because the original item cannot be found"
    And I have to press Cancel (and then it imports it anyway) for each of the 3500+ photos.
    What is going on?
    I need to employ a chimp to press Cancel thousands of times...
    I have not imported, deleted, moved or done anything. Apart from install iPhoto and then IMPORT.
    TIA

    Welcome to the Apple Discussions.
    Try this
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • Help - photo could not be opened, because the original item cannot be found

    I keep getting the following error message for about 10 different photos:  "The photo “IMG_0123.JPG” could not be opened, because the original item cannot be found."  It prompts to cancel or find these photos every time I open iPhoto.  Is there any way I can stop this.  I don't know if I still have the photos and, at this point, I don't care.  I just want it to stop.  Thanks in advance for any advice.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD 

  • Iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

    iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

    No changes were made. I saw in one of the threads where someone said to repair the database(which didn't work) or Rebuild the database(which did work). Thanks to one all for the support.
    WP

  • I have my photos  iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    I have my photos in  iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    When what is clicked?
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Photo shop Element 6 failed to open catalog  The catalog could not be opened.  It is either corrupt

    Photo shop Element 6 failed to open catalog  The catalog could not be opened.  It is either corrupt, or the version is out of date and cannot ne updated

    Hi John
    Thank you very much. As a result of your advise, Adobe Photoshop Element 6 are now working perfect.
    Once again, Thank yoiu
    Kind regards
    Boomie
    Original Message----
    From: [email protected]
    Date: 08/03/2010 05:37 PM
    To: "Boomie Shodeinde"<[email protected]>
    Subj: Photo shop Element 6 failed to open catalog&amp;amp;nbsp; The catalog could not be opened.&amp;amp;nbsp; It is either corrupt
    Your solution worked when applied to a administrative user account but did work with a student account.
    I'm not sure why that is happening.
    If you're on Vista or Windows 7, you could try setting the program to run permanently as Administrator, as described here:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Slide_show_preview
    If that doesn't help, my only suggestion would be to work through these tedious troubleshooting steps:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Organizer_ crashes

  • The photo "IMG_0005.JPG" could not be opened, because the original item can

    OK so I got back from Hawaii and wanted to import some pics. I had an unfortunate accident and had to buy a new camera. So now I had two cards both with some of the same image numbers. After I wanted to redo the import so I deleted the original pics and the folders in iPhoto and put them back onto the hard drive in separate folders. Now I get the message
    "The photo “IMG_0005.JPG” could not be opened, because the original item cannot be found."
    Now I have 1019 boxes that it wants me to cancel what do I do. Help

    OK so I got back from Hawaii and wanted to import some pics. I had an unfortunate accident and had to buy a new camera. So now I had two cards both with some of the same image numbers. After I wanted to redo the import so I deleted the original pics and the folders in iPhoto and put them back onto the hard drive in separate folders. Now I get the message
    "The photo “IMG_0005.JPG” could not be opened, because the original item cannot be found."
    Now I have 1019 boxes that it wants me to cancel what do I do. Help
    how did you do these delations? in the iPhoto window or using the finder
    do you have a referenced library ( (The iPhoto advanced preference to "copy imported items to the iPhoto library" has been unchecked) which is strongly NOT recommended. ) or a managed library (that option is in its default checked state)
    LN

  • I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before).  This time I am getting an alert that saysThe photo "IMG_5965.JPG" could not be opened, because the original item cannot be found.  Help?

    I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before).  This time I am getting an alert that saysThe photo “IMG_5965.JPG” could not be opened, because the original item cannot be found.  How can I fix this?

    There is a fair likelihood of an explanation of this symptom
    in another ASC discussion thread; see the reply by léonie:
    https://discussions.apple.com/message/20165563#20165563
    You may have to research any newer possibilities in trouble-
    shooting or resolving issues by use of iPhoto Support page.
    Since I don't use iPhoto as a primary editor or storage, the
    details on the topic aren't so good. I prefer ToyViewer editor.
    •iPhoto Support
    •iPhoto Video Tutorials
    Hopefully the error is easily corrected.
    Good luck & happy computing!

  • Re: how do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

    Re: how do I solve this alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found. How do I get rid of the alert so that every time I open iphoto or sync my iphone it will not come up anymore.
    Thanks

    The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

  • How do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

    it happened when I did an update on the iphoto
    how do I solve this
    alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found.

    The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

  • Iphoto update "The photo "X" could not be opened, because the original item cannot be found."

    Updating iphoto and get the Alert "The photo “X” could not be opened, because the original item cannot be found." Which is because I have archived thousands of photos offline. I can't go through the entire list one by one hitting the "cancel" button, but iPhoto apparently won't update unless this is done. Is there a way to skip this step? I can't run iPhoto at all with the alert live.
    Mac OS X 10.9.2

    Do you have a referenced library (The iPhoto advanced preference to "copy imported items to the iPhoto library" has been unchecked) which is strongly NOT recommended.
    If so then your only choice is to restore the originals back to the exact path they had when you imported them or to rebuild your library using iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  without them
    LN

  • The photo "IMG_5310.JPG" could not be opened, because the original item cannot be found.

    Each time I open iPhoto or plug in a device and iPhoto automatically opens, the following message appears five times, looking for photos I assume I deleted, perhaps the wrong way. 
    The photo “IMG_5310.JPG” could not be opened, because the original item cannot be found.
    I've searched the computer for the images, but they seem to be permanently deleted.  How do I "reset" iPhoto from looking for these photos and remove this "Alert"?
    Sincerely,
    Mark T

    mark, you are asking about iPhoto on your Mac, right? This is the iPhoto on IOS devices forum - iPads, iPhones, etc. Next time please post your question in the iLIfe iPhoto forum; you will get more help there.
    But to your question. This error message usually occurs, when original image files are missing from your iPhoto library. iPhoto keeps the original images and the edited versions, and when the originals are removed from the iPhoto Library by deleting them from the Finder, then the photos can no longer be edited, exported, printed.
    Does iPhoot open correctly, after the alert appears? Can you work with it, after the alert finishes? Then delete the corresponding edited versions of the missing originals from your iPhoto library. The versions probably will be marked by an exclamation point, when you browse your photos.
    To prevent this from happening again, open the iPhoto "Preferences" > "Advaced" panel and make sure the option "Importing: Copy items to the iPhoto LIbrary" is enabled. Otherwise original files may be stored outside your iPhoto library and you can accidentally delete them and loose valuable photos.
    Regards
    Léonie

  • "The photo "EGY_7895.jpg" could not be opened, because the original item cannot be found"

    I'm getting the following message when I click on any photo in my most recent import: "The photo “xxx.jpg” could not be opened, because the original item cannot be found". The thumbnails are in iphoto but it dosen't seems to reconize the files when I try to go in to edit. I have iphoto version 8.1.2. Help please.

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management. 
    It sounds like this batch of photos were imported as Referenced.
    Regards
    TD

  • HT5129 The photo "claire-66.jpg" could not be opened, because the original item cannot be found.

    because of the mobile me switch i can not use my iphoto. i had some albums in my mobile me web gallery and one of them i had deleted the original files so it will not allow me to use my iphoto because it keeps giving me this error message and i can't get rid of it.
    "The photo “claire-66.jpg” could not be opened, because the original item cannot be found."
    I don't have the original photo anymore so i can not link it to it.

    So, your iPhoto Library is now corrupted.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

Maybe you are looking for

  • How to Select Multiple lines in excel?

    I have about 700 lines and i want to select one full page or 200 lines of the total lines, how to do it by using the keyboard or the trackpad  pls help! thank you. Jos

  • Getting Invalid Cursor error in a procedure

    Hi, I have a procedure(1) which inturn calls another procedure(2) which does some task. Procedure(1) accepts response from Procedure(2). The error code of procedure(2) is *0* which is the success response. Iam getting 0 from Procedure(2). But still P

  • 4SNS/1/40000001: VPOR-0.592  Which could mean the error?

    4SNS/1/40000001: VPOR-0.592  Which could mean the error?

  • Automatic file download behaviour like firefox

    When I click on a file link which is not a web page in firefox it automatically provides me a dialog which allows me save the file to the desktop but when clicking on the same link using the air browser it does not appear to do anything. Does the air

  • Laptop starts only when charger plugged in

    I have a 15" powerbook G4 and suddenly it turns itself off automatically if i unplug the charger, its very weird. I have a battery and its charged, etc. etc., but it only wants to turn on when the charger is plugged. Anyone have any clue whats wrong?