LR 1.2 - white balance dropper not working

When I click the white balance dropper, I get the magnifying glass. When I move it, the white balance in the navigator updates real time but if I click on my image it zooms instead of setting white balance. This worked fine with 1.1.
Should I uninstall 1.2 and reinstall 1.1? I'm not sure how to go back to 1.1.

I've had that happen a couple of times for no obvious reasons. I've also noted some general 'cursor confusion' but, again, I can't cause the problem.
It's a minor annoyance.

Similar Messages

1.01--white Balance still not working?

the white balance tool in 1.01 seems better, but still not right. Every other white balance tool, you click on a pixel/area, and the tool turns that area neutral, eg. the RG and b channels are the same, and adjusts the rest of the image. In aperture it appears to do something else. not even the pixel under the tool ends up neutral, whether you're using the digital color meter, or whether you open it in psd and check there.
am i doing something wrong? or is this thing still not right?

Nope - it is still not right.
In CS1 to CS2 the big improvement was the "smart sampling" of the colour picker. It seemed to make the best calculatiuons of the 3x3 pixel region.
The fix has improved the quality (particularly the tint, but not the temperature as much). It is still really difficult to create a stamp for several white balance adjustments that works as it is too much by eye. Whereas with 1.0 I used ACR and re-imported, I can now use Aperture for 50% of the sodium lighting adjustments.

White Balance eyedropper not working?

Hi all,
Has anyone else tried doing a white balance adjustment in Aperture 2.0.1 with the eyedropper?
In 1.5.x, it worked great -- I just clicked the eyedropper, clicked on a known-neutral-grey area of my photo, and the white balance was adjusted very well.
In Aperture 2.0.1, I click on the eyedropper, then click on the same neutral-grey area, and for a second the photo adjusts beautifully -- then the white balance controls seem to randomly adjust back, and I get a photo that is no more color balanced than the original one.
Is anyone else seeing this, and/or does anyone have any ideas why Aperture won't stick with the initial adjustment I'm seeing?
Thanks in advance!
\marc

Still not working. I think the root cause of the problem is the mechanics of using the tool itself; I hope this screen shot shows up below ...
Here I have APPLIED EFFECTS open, and have selected Midtones (Greys) to be expanded so that the eyedropper and other details appear:
Now, just below where it has a box and "Impacted frame area in white" (which I know is a checkbox allowing the area effected to be seen), there is a little color box and an eyedropper.
What EXACTLY do I do to select (activate) the eyedropper and subsequently tell the program what I feel should be grey in the selected clip?
As mentioned before, I can click it and the cursor briefly changes to the same shape as the eyedropper. But as soon as I move the cursor a fraction, it changes back to an arrow (normal cursor) shape. Even then, going to the area I need to select in the image, and then clicking it, does exactly nothing to the appearance of the image shown -- even if the colors start way off. No correction at all. It is as if the tool does nothing. The color wheels below all this DO work however - it's just the eyedropper that doesn't do anything. This just cannot be Adobe's intention. I am convinced there must be some flaw in how I am selecting the tool itself. And the user guide - needless to say - is worthless in explaining the mechanics.
So very frustrating. This appears to be the only thing wrong with the program - nothing else seems amiss.
NOTE: To add insult to injury, this promised white/gray/black balance feature and the three-way-color corrector is the SOLE REASON I purchased the software. Funny.

White balance dropper -- any way to keep it "on"?

Hi all,
If I click on the White Balance dropper, then head all the way over to the picture to click on a grey spot, if I don't like the results, I have to go all the way back to the dropper, click on it again, and come back to another gray spot.
Is there a way to keep the dropper "on" until I turn it off? Or I suppose there's a keyboard shortcut? How do you all do this, checking a number of spots for white balance?
Thanks!

There is a keyboard shortcut for the white balance dropper as well, but it's not documented anywhere. I'm unsure why this is.
And it only works if you have the adjustment panel showing .
Anyway, command-shift-w will bring up the white balance dropper, so you don't have to keep mousing.
Also the shift key note above will work as well, in that you can continually sample. In fact if you keep the shift key held down and move the eyedropper it will show you continuous real-time white balance changes.

Lightroom: Why does auto white balance no longer work after changing the camera calibration profile?

I'm using NEF raw files from Nikon.
Lets say for example I import a NEF file into Lightroom (v4) and click on 'auto' for white balance. The white balance in the image is adjusted correctly (somewhat). However, if I then change the camera profile (in the camera calibration section) from 'adobe standard' to 'camera standard' then the white balance in the image becomes very wrong. I then have to set the white balance back to 'as shot' and correct it manually instead.
Why would 'auto white balance' no longer work just because I change the profile from 'adobe standard' to 'camera standard'?
Any ideas?

Works as expected here...
Which Lr version and what OS??

I lost the little white balance dropper thingy and the option to change exposure and cannot figure out how to get them back! Help! Thank you!

I lost the little white balance dropper thingy and the option to change exposure and cannot figure out how to get them back! Help! Thank you!

Are you saying you've lost the "Basic" tool tab?
If yes, just right-click on one of the other tabs and select "Basic" from the context menu that's presented.

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

I downloaded Lightroom 5 but tab with White Balance Dropper have disappeared?

White Balance dropper tab dissapearence in Lightroom 5.3

You need to restore the Basic panel:
http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

I have iMove 11 and photos turn very dark when I drag them into the project. Changing colour white balance does not fix the problem.

I have iMove 11 and photos turn very dark when I drag them into the project. Changing colour white balance does not fix the problem.

Thanks for your no help line.

Creative cloud installed on the desktop, but when I start the window is white and does not work

can someone help me?

Thank god be with
2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
Creative cloud installed on the desktop, but when I start the window
is white and does not work created by Sheena Kaul
<https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
the full discussion <https://forums.adobe.com/message/6672088#6672088>

Video white balance levels not showing, so video effects and color editing won't work

I've watched white balance tutorials, and I tried clicking the dropper onto the viewer to change the color. But, in the gray box above it there are normally red green and blue lines, but I have nothing there. I think this is preventing any edits to my color balance, can anyone help?

Well, no offense, but you seriously should read the C4D help. That's normal specular shading behavior and it is uniform acroos the plane because you obviously haven't defined any scene lights and use the default viewport light. Read up on how to create materials and adjust there properties and then learn the fine art of scene lighting as well as how to use object buffers to isolate objects with multipass renders.
Mylenium

Cannot get white-balance correction to work

I have some diving video that needs white balance correction. I am trying out the PE11 trial.
I've tried smart-fix as well as the 3-way correction tool. I've used the dropper to select something that should be white, but it makes little to no difference.
Any ideas why ?

As an experiment I went for another dive today, this time taking the same camera (Canon S110 with underwater white balance mode active) as well as a GoPro with a red filter. The video from the GoPro seems to have much more colour in it so I think it's a case of the Canon not capturing as much of that spectrum. I'll do another dive tomorrow and manually set the white balance to see if it makes any difference. I'm so use to shooting on the GoPro that I was surprised by the reduced colour in the Canon.
Is there any way to determine how much of red / green / blue is available in the video using PE11 ?
Thanks for the reply.

Camileo H10 - white balancing doesn't work

I have bought this recorder in December 2008. I have tested some records in interiors an exterior and I found, that white balancing doesnt work.
I can set it as auto or as manual, but all videos are little bit pink. Is it a firmware problem or is it a wrong piece? Where I can get new firmware?
Thanks for answer

Hello Bunak
Toshiba has released new update and you can find it on Toshiba support and download page under http://eu.computers.toshiba-europe.com > Support & Downloads
On drivers download page please choose the follow criteria:
Product type Options
Family Digital Imagin
Product series Digital Video Cameras
Model Camileo H10
Operating system OS indepent
Driver type Firmware Update
So there you can find Firmware Update version 1.1. Last modified date is 02/12/08.
In order to provide the best quality, updated Firmware for Camileo H10 to results with upgraded function as the follows.
1. Tune MIC input (Improve the volume of MIC)
2. Tune focus window (Improve the AF)
3. Tune AE to avoid the over exposure
4. Tune color matrix and saturation (Improve the color performance)
5. Tune noise filter (Improve the noise level)
6. Tune WB (improve the AWB)
7. Modify UI string in CZ
Here the steps how to do the F/W (Firmware) upgrade:
Firstly, there are two different language version of UI (User Interface) by EU&UK version and EEMEA version. Please select the proper file based on your preferring language.
- EU&UK F/W ver. 1.1 include: English, Deutsch, Franais, Italiano, Espaol, Portugus, Dutch
- EEMEA F/W ver.1.1 include: English, Czech, Greek, Hungarian, Polish, Russian, Turkish, Slovak
*1.Copy F/W files to a SD card*
- Format SD card. Make sure FAT file system is selected before formatting.
- Copy the F/W files ( zburnT_C10.run.elf and DCIM folder ) to root directory of SD card
(PS: there is another folder and file under DCIM folder, please do not change content of this
DCIM folder)
*2. Update Firmware (Please make sure there is no battery inside the camera and AC adaptor is not connected to the camera)*
- Open panel first
- Insert SD card which has the F/W files
- Insert battery (make sure the battery is full), then plug in the AC power adapter to the camera.
- Press Shutter key when you see press shutter to update to start the update process. During F/W updating the LED will keep blinking. Do not remove battery or disconnect AC power adapter during this operation otherwise the camera will be damaged.
*3. Update Completed*
- The LED stops blinking after the firmware updating has been completed (Please make sure the LED stop blinking)
- Before reboot the camera please remove the AC power adapter, battery and SD card from camera in order to avoid updating firmware again.
- The F/W upgrade had been completed.
Please follow these steps and let me know if everything is Ok now.
Good luck!

White Balance Metadata not showing in Adobe Bridge CS6

Hi there, I am running Bridge CS6 on a Mac, and use Canon 5D and 5DMark 111 cameras. I have an issue with Bridge which I can not seem to figure out. Whether I shoot Raw or JPG and I am trying to do some testing for white balance, once I open the images in Bridge, in the little icon panel just below the folders/favourites panel etc I can see the f stop info, speed, metering , ISO etc, but the only icons I get for WB are if use auto - then I see AUTO. But when I do a manual WB like 'cloudy', 'tungsten', or 'shade' etc all I get are the symbols for 'Custom" or "Manual". How do I get the actual symbols for what type of WB i've chosen to show up?
I have purged the Cache - both in the individual folder and the overall Cache in preferences. I have checked that all the boxes are ticked in the preferences panel for the Metadata. So not sure what else to do.
Cheers D

Ok thanks for that, at least I wont be chasing my tail.
I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

White balance setting not importing from Canon 5D

I shoot in RAW with 2 Canon 5Ds. On both bodies, the white balance is set to K (Kelvin temp) and is dialed to 5500. But when I import into Aperture, the white balance on the files is not at 5500 for either camera. One camera's files display a whte balance of 5102 with a tint of -16. The other, 5428 and -9. Sure, I know how to batch correct this manually after import, but is there a way I can get it right in the first place?

That's normal. If you shoot RAW, Aperture will not care what white balance you set on the camera. Once it's imported, then Aperture will try to get the best WB (not sure the logarithm). If you want all your pictures to be 5500K, set one to be 5500K and then lift and stamp the rest.

LR 1.2 - white balance dropper not working

Similar Messages

Maybe you are looking for