LR 1.3 cannot save changes to export preset - only create new presets

So, in LR 1.2, I could change some parameters in a preset (export presets) and then save the changed preset. But the upgraded LR 1.3 export form does not seem to have a "save" option. I can create a new preset, I can remove a preset, but I cannot save a change to an already existing preset. I can get around it by ...
. add, creating a new (ie. temporary) name saving my changes
. open the original preset
. remove (the old preset)
. open the new preset (with the temp name)
. add using the old preset name that I like to use
. open the temporary (ie. new) preset
. remove (to delete the temporary preset)
- yuck! What an ugly work around :(
Can we please have our save option back again?

It's still there. Right-click the preset you want to update and select that option.

Similar Messages

  • Cannot Save Changes in Library - Help!

    I still cannot save changes I make to a library image back to
    the library. I open library, drag the image to the stage, make a
    change ... and then it just sits there. Nothing in the library
    changes, nothing I do can make the original image in the library
    take the changes. I've tried saving as, exporting, creating a new
    image (it will not allow me to give it the same name as an existing
    library image .. the one I want to change).
    I suspect some bug in Flash since I re-installed it on a new
    laptop. It worked before. I have tried re-installing it and have
    the latest updates from Flash site.
    Any ideas???

    OK, never mind, I figured it out ... it was my unfamiliarity
    with Flash, I rarely do anything there. I had selected the "open as
    library" command which does not permit editing. Instead I needed to
    open the fla file, then choose Library from the Window menu
    Duh.

  • Error message: iMovie cannot save changes to the library!?!

    iMovie crashed my computer and now I can't creat a new movie.
    Here's the full error message:
    iMovie cannot save changes to the library.
    The hard disk where your library is located may be full or unavailable or permissions may have changed. To avoid losing your work, quit iMovie.
    What's up with this? I tried trashing the preferences, but got the same message. I have a 27-inch late 2013 iMac running Mavericks with 445.55 GB free space.
    Please let me know if you have any suggestions.

    You've already tried trashing iMovie preferences (By the way think in Mavericks you have to reboot as well after this for the new preferences to take effect) .  One other thing to try is creating a new user account, logging in and seeing if you can create a new project in iMovie (of course you won't see your exisitng projects).  If you can then iMovie itself is OK.  If not  then the only other thing I can think of is re-installing iMovie  (see http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm)
    Is everthing else working OK after your computer crash?  Maybe you should also run Verify disk in Disk Utility.
    Maybe someone-else has some other suggestions (I have not heard of this problem before)?
    Geoff

  • Error has occurred. Cannot save changes.

    When I try to purchase an app, I get a screen asking me to fill out security questions. I fill all of them in and click on "done" and it says "an error has occurred. cannot save changes". I did a google search and apparently this has been going on for several years. But no where did I find a solution.

    Were you able to find a solution? I have the same problem

  • When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

    When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
    THANKS LLOYD

    BARBARA,Yes, you are so right, I was deceived by the eve button,  Just tried it and it WORKS GREAT-Thanks for the help.
    THANKS AGAIN AND HAVE A GOOD DAY Lloyd
          From: Barbara B. <[email protected]>
    To: Lloyd Bennett <[email protected]>
    Sent: Tuesday, January 13, 2015 11:46 AM
    Subject:  When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Cannot save changes to an Indesign document

    I have documents from a client that were created in an earlier version of Indesign (I'm not sure if it was CS3 or CS4). I use Indesign CS5.5. I can open the documents OK and work in them without problem. (I have all the fonts being used, but some of the image links are missing)  I'm adding pages and formatting text as I go. Then around 30 pages into the job, I find that I'm unable to undo or save any changes to the document. I've tried exporting to an IDML file and reopened it as an Indesing document and I still can't save changes.
    Can anyone help me? Short of rebuilding the document from scratch, I don't know what to do.

    I'm using InDesign CS5.5
    I am having exactly the same problem, all previous discusions are the same for me...
    I also use a font manager (suitcase fusion), no other plugins.
    And this counts for all files i try to save in indesign right now..
    and i noticed my links panel seems to be failing, it's open but it doesn't show any content or knobs or sliders.. "blank panel"
    Any thoughts, I seriously need to get this out the way.. work needs to be done!

  • Integration Builder cannot save changes

    All,
    We have a problem with Integration Builder both Design and
    Configuration. If we restart the XI server then we can save changes from both the Designer and Configuration lists one ot two times. After that we get a Java: Null pointer error whenever trying to save changes.  No errors reported by ABAP engine or database. Connection to SLD server seems OK.
    In the default tracefile the exception message says that a zipfile cannot be written.  Have checked the database and filesystems, everything looks OK.
    Thanks for any help,
    Alan Nichols

    Hi,
    If you running Xi on IBM machines please take a look at
    Note 859465 - NullPointerException in DTR/XI it solved our problem.
    Kind regards Johan Göthberg

  • Cannot save changes when enabling Publishing Server

    I have Contribute 4 with Contribute Publishing Server 1.11.
    I'm able to setup normal Contribute sites fine and was able to
    setup one Publishing Server site. Now though, whenever I try to
    enable Publishing Server on a site, it enables alright but when I
    close the Site Administration window I get an error that says
    "Contribute cannot save your changes to the website's shared
    settings on the server".
    I've tried checking permissions; everything seems 'liberal'
    enough like Contribute likes it. I've reinstalled Publishing Server
    (including deleting any _mm folders). I've attempted deleting and
    re-adding sites more times than I can count. Nothing has seemed to
    make a difference. Has anyone experienced this problem or have any
    ideas what might be going on? Thanks very much!
    Nathan Williams

    Hello Nathan, I'm using Contribute 3.11 (without Publishing
    Server) and I'm experiencing the same issue: "while trying to setup
    the admin password".
    It seems to me that this is a bug from Macromedia... and
    hopefully they will respond to us.
    Alan Q.

  • Cannot save changes to files on raid

    Background - G5 xServe, xRAID - 6 Folders shared out to mixed environment, OS X, XP Pro and Vista. I am in the Administrators group and have full access to all folders on RAID. Admin group has four members 3 on Vista 1 XP. I can open and change/delete/create new from my Mac Pro without a hitch.
    We can all read files, but we cannot open a file on the raid and make a change and save from Vista - X and XP are fine. Have tried everything under the sun for Vista file sharing issues and I hate to say it, it doesn't appear to be Vista.
    If I open a Excel file change one cell and then try to save i get the following message " Access Denied. Contact your Administrator" or "Destination Folder Access Denied". On all of the shared folders with the exception of one. That folder I can change whatever I want and save.
    The ACL and POSIX look to be good and match for the administrators group.
    I have no problem dropping the file on my desktop and then opening and making changes and copying back to the shared folder, but our CIO would prefer to make the simple changes and then save it without the extra steps.
    Before anyone bashes Vista, the error message indicates that it coming from the shared folder and is getting it's information/permission from there.

    I found the answer in another post - here is what I did. Stop SMB service, opened up my favorite text editor and navigated to the /etc/smb.conf file and added the line *acl check permissions = no*. Restarted SMB service, logged in from my Vista box and saved changes without a hitch.

  • Adobe Suite CS5 - "Cannot save files"  - files are Read Only files

    I had a power failure and now have a back up battery installed so I'm set for future outage.  But it corrupted my Creative Suite program.  I keep getting this error      "Cannot save "untitled-1" under a new name.  The file "DBT mp542438996529" is damaged (Error code: 0).   or "Cannot save "Untitled" under new name.     
    1.  I right click on icon of Photoshop/ Indesign CS5 file and open "Get Info"  I can not reset the You can only read  under "Sharing & Permission".  The Name/Privilege list have Read & Write but I can not open/click on them. 
    2.  Same issues with Photoshop CS5
    I have iMac computer
    3. If I re-install do I need to "deactivate my Serial number on Adobe Suite?
    4.  Not a good day for me
    Any help is truly grateful!
    Message was edited by: KAS-SCPA

    CS5 Clean Script
    http://kb2.adobe.com/cps/829/cpsid_82947.html
    or http://www.adobe.com/support/contact/cs5clean.html

  • Sharepoint 2003 Cannot save change by IE when click Save and Close button to save change on survey item

    I am using Windows 7 SP1(cannot confirm the IE version, suppose IE8).When I tried to edit a survey item, click Save and Close button. Data cannot be saved.No problem with my account or permission since I can change it on another computer.Below action cannot
    fix the problem:clean IE catch, reset IE, reinstall IE, rebuild windows profile.
    error can be seen at the IE status bar
    Erros on this webpage might cause it to work incorrectly
    'length' is null or not an object
    custom_ows.js
    'undefined' is null or not an object
    custom_ows.js
    Code:0
    URI: http://server/_layouts/1033/custom_ows.js

    Mainstream Support for SharePoint 2003 has already ended and it does not list IE8 as a supported browser:
    http://office.microsoft.com/en-us/technet/system-requirements-HA001160515.aspx?pid=CH011719821033
    You can always try to add the site to Compatibility Mode, but there is no guarantee that it will work in this scenario,
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-8
    Dimitri Ayrapetov (MCSE: SharePoint)

  • Attempting to clone MAC address, cannot save changes.

    Hello.
    I am attempting to use the MAC address cloning feature on my Linksys e2000 router. When I check "Enabled" and then attempt to save settings I receive "The values you entered are invalid. Please try again." I also receive this message if I select "Enabled" and then "Clone My PC's MAC". All other change to settings seem to work.
    Any help?

    You might have to reset to factory defaults since there isn't any reason why this is occurring AFAIK. Maybe trying to clone the router's MAC onto itself broke something in the firmware.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • PLD cannot save changes

    Dear All,
    Our customer is on SAP2007 PL49, SQL Server 2000. When I modify the PLD for them, I can save the changes. But when they log off SAP then log back in, all changes I made before is gone. Any idea? Thanks a lot.
    Regards,
    Yuka

    When the system is not under supported platform, anything can happen with no cure.  Try to convince them to change.  Otherwise, even SAP support would not take the case.  It is not a good excuse that someone else run it without problem.  That is purely lucky.  Shouldn't be an example to follow.

  • Cannot save changes in schedule in PWA.

    Hi Folks,
    Please help to resolve...
    I have Project Server 2010 with about 60 projects. It was working correctly for about year.
    But some time ago, users get this message when trying to edit schedule via browser (IE11). 
    "This edit is unsupported in Project Web App. If you wish to make this change, open your project using Project Professional."
    Previously, users can edit the schedule. This error occurs also on just created projects, with empty schedule.
    Why may occur such a problem?

    It can also be the case where when you are creating a new task from PWA there are custom field with formulas that when calculating, read content from other fields or tables that might not be yet initialized or are in error.
    In this case the calculation process fails and the task cannot be created.
    As this also happens only for few users it looks like the formula based custom field is set on a particular view for Projects.
    Resolution
    In such cases as Project Server 2010 does not have a calculation engine like Project Server 2013, I would suggest that you update the value of such custom fields through Project Professional, or edit and change or remove the formula
    custom field from the view in the Schedule page.
    Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
    the thread.

  • Edit ACL on Endpoint - Cannot save changes - Save greyed out

    I have a trial subscription to Azure. I created my first Windows 2012 VM. I can successfully access the VM remotely.
    I'm attempting to add ACLs to the Endpoints. In this example it is an HTTP Endpoint.
    The ACL statement is accepted, like so
    Order | Name  | Action  | Remote Subnet
     1      | Namex | Permit | 192.168.28.0/19
    (Altered Remote Subnet)
    I have no option to Save the edits. It is greyed out. If I attempt to move on to a different menu, I get a warning about unsaved edits will be lost. When I click away and click back, the ACL is lost.
    I basically have no method to save even the simplest of ACL statements. What am I doing wrong?
    Thanks for helping.
    David

    Hi Dave,
    Thanks for posting here.
    I tried to reproduce the issue on my machine, I tried editing the ACL which was created and made some modifications to the previously created ACL and I had the option to save it.
    Without making any modifications to the ACL list, you may not get the option to "Save" it will be greyed out.
    I have attached the screenshot for your reference.
    Note: You can also create ACL endpoints on the old Azure portal (www.manage.windowsazure.com)
    Ref:
    http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-set-up-endpoints/
    Hope this help you.
    Girish Prajwal

Maybe you are looking for

  • 7510 does not appear in control panel

    HP Photosmart 7510, WIN 7, 64bit.  No other changes. HP Pavilion dv4. Installed with CD.  Printer connected to netowrk just fine, everything indicates it installed correctly.  Won't print from PC.  Printer does not appear in control panel. Tried rein

  • Failed to initialise the dbms

    Hi all, We had installed SRM ( both abap and java stack),MDM .It is working fine. when we try to mount the SQL datbase to the console we are getting the error Failed to initialise the dbms. all database, and all application server installed on the sa

  • Does Merge dimension button work on BI OLAP Universe webi reports

    Hello all, we are using BI 7.0  queries as our datasource for creating universes. When we are using the webi rich client to create a query, there is add query button and we are able to add query but once I add query I am not able see the Merge dimens

  • How to transform Xml to html which contains javascript

    I know it is useful to use xsl to do simple transformation, but since I need to pass some values into the javascript's functions in html, just don't know how to do that. Any advice is apprciated!!

  • Missing Smart Collection Filter?

    I've tried: - Opening other smart collections - Opening other events and other smart collections - Opening other projects, events, and other smart collections - Restarting the application - Restarting computer - Reinstalling the application