LR 2.5 slows down after upgrading to Snow Leopard

This is my first post, so first of all I'd like to say hello to everybody here and apologize for my poor english
My computer is an iMAC with an Intel Core 2 Duo, 4GB RAM, 500GB HD and a graphic card NVIDIA GeForce 8800 GS with 512 MB VRAM.
The LR database is contains, up to now, about 5000 photos most of them in NEF format (my camera is a Nikon D300)
In the last month I noticed that the performance slowed down consistently as thumbnails refresh started taking a long time as well as editing photos and the overall LR2 (executing at 64bits) working.
I started monitoring the system, but despite the low LR2 performances I still had a lot of free RAM and the cores weren't really working a lot.
I can't say this for sure, but I could bet that the performance problems began with the upgrade to Snow Leopard.
Can anybody help me to solve this issue?
Thanks a lot in advance
Roberto

Ian Lyons wrote:
Lightroom performance should not have deteriorated as a result of upgrading to Snow Leopard. Things that you should check are:
1. that you are indeed running Lightroom in 64-bit mode (open System info under Help menu and check that Application Architecture shows x64)
2. that you have all of your previews rendered to at least Standard-size
3. that you have at least 20% free hard disk space
You should also run the Catalog Optimisation option in Catalog Settings
1. Yes, LR2 was running in 64 bit mode before upgrading to Snow Leopard, then (don't know why) gets back to 32 just after the upgrade and I manually set it to 64 bit (checked in the application and on the process monitoring while running)
2. I have the preview rendered 1:1 in the folder I'm working on (done again tonight)
3. I have 55% free HD space
4. I run a Catalog Optimization many times, The last one was tonight
In other words I've checked and tried all these things many times. I've red on the internet that it might be a geforce 8800 issue, but I've found only windows references. Don't forget that neither RAM nor CPU are stressed when LR2 is working and all other applications run normally

Similar Messages

Painfully slow internet after upgrading to Snow Leopard

hi all, i recently upgraded to Slow leopard.
My internet has soon become painfully slow, taking (literally) minutes to load pages. I have checked my modem & router, they seem to be fine as my iPhone & Vista laptop run perfectly on the same network.
does anybody know what this could be?

If you have not done so since upgrading to Snow Leopard, you should run Disk Utility and use +Repair Disk Permissions+.
Have you used Software Update to apply Apple's latest updates after upgrading to Snow Leopard. If there are updates, you should run it a second time to ensure there were no dependent updates.
As a test, you can create a new admin user account in System Preferences Accounts pane.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Log out and log in to the new account. Try the things that caused the problems. Is it fast in the new account, or is it the same? If it is fast, then the cause is likely to be in your normal user account. If it is the same, then the cause is likely to be with the overall system (the OS).
You can also try doing a Safe Mode startup
http://support.apple.com/kb/HT1455
This will do some maintenance during startup and also load only Apple's essential system extensions and processes. Any third party software you have installed will not automatically run. Check the performance while in safe mode, and if there is improvement, restart normally to see if the problem comes back or not.

After upgrading from Snow Leopard to Mountain Lion, the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

After upgrading from Snow Leopard to Mountain Lion, and setting the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

I'm Win, not Mac, but I do have a couple saved messages
Mac 10.8.3 Bug w/Encore and BluRay http://forums.adobe.com/thread/1198709
-create folder not ISO http://forums.adobe.com/thread/1216127

Slow/jerky transitions after upgrading to Snow Leopard

Hi,
I've just built a short iMovie and have noticed that my transitions (cross dissolve and cube) are very slow / jerky / not smooth after upgrading to Snow Leopard. Any one else having this problem?
Steve

Yes LS needs a update to work with the changes in 10.6.8, so does Parallels.
Read my backup, bootable clones, troubleshooting, performance, wifi security and restore info/advice here
https://discussions.apple.com/message/16276201#16276201

GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
Back to GCC printer. Just cannot get it to work.
But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
GCC tech have this work around. Here is what I received from GCC via email.
+At 01/02/2010 12:21 AM we wrote -+
+Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
+You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
+You can add the printer over IP, that should work fine. Here are some steps for you to take.+
+1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
+2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
+3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
+4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
+5) Next to 'Protocol' select LPD Line Printer Daemon.+
+6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
+7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
+8) (Optionally) Next to 'Print Using' change/verify the PPD.+
+9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
+10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
+11) Done. You should be ready to print.+
Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
gibberish. There is nothing to unstuff and install.
All worked well with OS 10.5.
Thanks for shedding any light.
John L.
Thanks,
John

Hello John,
At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
Hope this helps. Please reply if you require more help.
Pahu

After upgrading to Snow Leopard, Canon MX870 doesn't print text...just images

After upgrading to Snow Leopard (yes I know I'm slow to upgrade) my Canon MX870 isn't printing text. It is printing images but the quality if horrendous because it's not printing the black ink.
Here's what I've done so far
Installed the latest drivers for Snow Leopard from Canon
Cleaned the heads of the printer
Added new ink to all cartridges
Run printing tests (nozzle print patterns)...all good
Reset my printers in the Print Fax Preferences and added in the printer again
Numerous restarts
Now I'm at a loss for what else to do. Does anyone have any other suggestions?
BTW, printer is connected via USB not wireless.

OK well I can see now that all of my files are present on the hard drive (mybook) only they are not showing up in aperture. It seems that there has been some sort of communication breakdown between the two.
As I said several files are missing and or corrupt in my aperture library. I'm wondering if there is a way to rebuild the library without using the vault technique? Does this make sense to anyone?
I was able to go into finder - mybook - aperture library - show contents and see that all my raw files at least are there. Now I just need to get aperture to recognize them.
Any help is greatly appreciated!
Chris

After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

SqueezeAce wrote:
after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
On the second screen, under the Utilities menu is a Password Reset, use it.
Step by Step to fix your Mac
What this will do is reset the password and the user account permissions in the process.
You might have problems with Keychain afterwards, to fix that.
https://support.apple.com/kb/HT1631 https://support.apple.com/kb/TS1544
If your still having trouble, look through these User Tips
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

Titles and Transitions doe not work after upgrading to Snow Leopard

I can not get my Titles or transitions to work in iMovie any more after upgrading to Snow Leopard.
Everything goes to a black screen. I am having problems with final cut express also. Anyone have an idea when there will be a patch to fix this? I would hate to have to down grade.

Holy *&$^, no kidding. I mean this is bad. I can't really do anything on iMovie at all. I really hope there is a simple solution to this, b/c if this really is part of a bad release, Apple will not hear the end of it.

Logic 8 (8.0.2) crasches after upgrading to Snow Leopard (10.6.8)

Hi, everyone! I hear some of you have problems shutting down Logic after upgrading. I have a similar problem. Logic 8 (8.0.2) crasches after upgrading to Snow Leopard (10.6.8), when choosing "open" . This doesn't happen when I choose "Open Recent". When i open a project, I can't close it without saving first, though I havn't changed anything. Any clues?
/Anders, Stockholm, Sweden

Hi there CANTONOR,
You may need reinstall Quicktime 7 and restart your copmuter. I would recommend taking a look at the information found in the article below.
iPhoto '08: Viewing videos in iPhoto '08 on Mac OS X v10.6 Snow Leopard may need QuickTime 7
http://support.apple.com/kb/TS3003
-Griff W.

App Launching Unresponsive After Upgrading to Snow Leopard

For reasons I do not quite understand, launching any app, and doing many things within them (basically, instantiating any process) is extremely slow after upgrading to Snow Leopard. For instance, opening a new window in Terminal takes a full 22 seconds (I've timed it) to go from "login" to the zsh prompt. Before, it was instantaneous. There is nearly nothing installed on this computer other than the bare essentials and some documents.
This is obviously very frustrating and detrimental to my productivity. Here is what I've tried:
- Reinstalling from scratch (I've now tried this two times). First, I backed up my home directory with SuperDuper and manually copied everything over. Everything was fixed, for about two days, and then it started doing the same thing again. Then, I cloned the entire disk with SuperDuper and restored from it. Again, everything was fixed for a little while and then I had the same problem again.
- Most recently, I tried "Verify disk" in Disk Utility. This returned that there were errors (an "invalid directory count"). Therefore I rebooted into the installation disc and ran "Repair Disk", which outputted that the disk was repaired successfully. However, I rebooted back and now have the same problem.
Does anyone have any suggestions as to what is going wrong? My first thought was that perhaps the hard drive is failing, but I've dual-booted Linux on another partition and it works fine.
I am very confused. How can I fix this?

Have you updated iTunes?

Unable to print after upgrading to Snow Leopard (Dell 1320C) - Network

This recently started after upgrading to Snow Leopard.
The OSX drivers worked well with Leopard 10.5.xx but after upgrading to Snow Leopard, i keep getting "network host busy" or "could not connect to printer".
I've tried completly removing printer, reinstalling (IP based), drivers etc etc I even resetted the printing system (right clicking and reseting in the printers list).
This works fine with Leopard but it fails on Snow Leopard..

I had the same problem not being able to print to Dell 1320c after upgrading to Snow Leopard. Here is a work around for the Dell 1320c printer to work on Mac with Leopard 10.6.2
Do not use the printer driver from Dell. Delete the Printer Setup from your Mac.
Locate Mac Driver Suitable for 10.5 (Version 1.7) at http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5452&categ ory=5726
Double click the icon to install after it downloads. It should create file DPC525AAPv17x5.dmg. When the install is finished you can delete the installer.
From the Apple menu open System Preferences and select Print & Fax.
Click the + to add a printer.
Select IP Printer.
Select for the Protocol: Line Printer Daemon - LPD
Type the IP address: 192.168.1.xxx or whatever your printer is assigned on your network. (If you don't know, go to your printer and hold down the Green button until the configuration sheet prints. You can see the IP address once printed.)
Name the printer "Dell Color Laser 1320c" or whatever you'd like to call it.
For Print Using select: FX
Next select FX DocumPrint C525 A-AP v1.7 in the box below.
On the next screen you must select 250 Sheet Feeder as an option. Otherwise it will only be able to manual feed.
Click Ok.
Go to Print something, File... Print... but don't click the Print button yet.
Under Pages: go to the Drop Down and select Fuji Xerox Features.
Find the Paper Source Drop Down and select Tray 1 (250 sheets),
then go up to Presets: Drop Down above and select Save As...
and under Preset Name, type Standard-1, leave This Printer Only and click OK.
Now you can click the Print button. This will set the Dell 1320c printer to print from the document tray and not try to manually feed all the time.
Anyway, that's the work around to use the Dell 1320c Color Laser printer under Mac OS Snow Leopard 10.6.x.
Hope this helps!
Good Luck
P.S. I guess eventually Dell might come out with an updated driver, but don't hold your breath...

After upgrade to Snow Leopard temperature rockets skyhigh

Hi everybody,
After upgrading to Snow Leopard, and further to the dot 1 release my iMac runs so hot that it starts to smell. the power supply temp goes to 95 Celsius. It used to stabelise on 75 Celsius before the upgrade.
Fans don't seem to kick in anymore. I shut down after every two hours or so to avoid damage.
Apart from that SL runs fine. I read the other posts abt temperature, but awaiting a real solution.
Thanks,
Rob

Go into Displays Preferences and, if you haven't already done so previously, put a checkmark in the box for "Show displays in menu bar". Then, click on the resulting icon that shows up in the menu bar to drop the menu and select "Number of Recent Items" and set it to 10. Now drop the menu a second time and see if there are two 1920 x 1080 resolutions. If so, one of them may be the older one previously in use that was working.

Can't open Pages after upgrading to snow leopard on 10.6.8

Can't open Pages after upgrading to snow leopard on 10.6.8

Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Editing after Upgrading to Snow Leopard

After upgrading to Snow Leopard, I get the following message whenever I try to edit a picture-including those that have been edited before:
"Unreadable Files:
The following files could not be imported. (The file is in the iPhoto Library)"
At the bottom of the screen is "Preparing to Import" with a constant "beach ball".
Any suggestions?
Thanks.

Given that this is happening in two Libraries we know the Library is okay amd now we need to look at the OS and the application.
What hardware is connected to your Mac? Disk? Scanners, Printers, Card Readers, multi-putpose machines?
Disconnect them and see does the problem recur.
If it's still happening: a final test:
Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

LR 2.5 slows down after upgrading to Snow Leopard

Similar Messages

Maybe you are looking for