LR 2.6 Numeric Keypad + Does not work

Windows XP sp3 -- I have searched and noted others have this problem, but have not been able to find a solution or workaround.
How can I get my numeric keypad + sign to work with LR (as it does with CSR 4)?
Thanks
Mike

Thank you sooo much for this answer. I use an iMac G5, but still, had apparently done the same thing. It was so nice to find this solution and be able to fix it.

Similar Messages

  • Number 2 key on numeric keypad does not work. All other keys work properly.

    The number 2 on the numeric keypad does not work.  Is there some way to clean it?  If not how do I go about ordering another keyboard?

    inside the remote there is a micro switch for each direction each can break
    so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

  • G550's numeric keypad does not work as it should be

    Goodnight everyone, recently bought a laptop lenovo G550. He has a numeric keypad and one thing is making me confused. The key should be a dot "." is actually a comma ","..... what should I do? I tried everything ... My current setup is Portuguese Brazil ABNT 2
    Please Help-me
    Stevan Cseke
    Brazil
    Note from Moderator:  Private information removed for your protection.

    try this : http://windows.microsoft.com/en-US/windows-vista/C​hange-your-keyboard-layout

  • Numeric Keypad does not enter data into Excel

    Is there a way to turn on/off the numeric keypad for the imac intel based apple computer when using Microsoft Excel?
    I want to enter numeric data into the cells of a spreadsheet in the Excel program, but I can not figure out how to get the numeric keypad to work to do this. It will only work as a directional keypad, moving the active cell left or right, or shoot to the end of the spreadsheet. Consequently I forced to use the use the row of numbers above the keyboard (which is also the row of numbers below the function keys) to enter data.
    Strangely, the numeric keypad will enter data with other programs, such as Word or when entering data into an online page.
    I have searched Apple help without success.

    Make sure that NumLock has not been engaged. To toggle that on and off, press Shift-Clear ("Clear" is the key immediately above the 7 on the keypad).

  • Apple Bluetooth Keyboard: Numeric keypad keys not working

    Hi I have a G5 PPC and the 4, 5, 6, and + (all in a row) keys on the numeric keypad stopped working. Replaced batteries and re-paired the Bluetooth—no joy. Tried cleaning under these keys with a blast of air and it didn't help either.
    Any ideas? Appreciate any advice. Thanks
    Message was edited by: persist

    I don't think there's any way to take the board apart, my suspicion is that whatever mechanism causes them to register is warped or damaged in some way. I would think that repairing the board would not be cost effective, a new one would seem to be the way to go. Sorry that there's not a clearer answer.

  • LENOVO G560, BEEP SOUND ON STARTUP & SOME NUMERIC KEYPAD BUTTONS NOT WORKING

    My g560 sounds continous beeps while starts ups, some numeric keys on right side not working like 2, 4, enter key, etc.
    some times the number 2 keys works automatically any time while working on WORD file or on run command.
     whts the problem,, plz advice.

    Hi abgautam00.
    Welcome to Lenovo Community Forums!
    If your system still boots to windows ok,
        I think it's a stuck key that's causing the beep
    Try Installing this Software test
    http://www.passmark.com/products/keytest.htm
    Run this app within Windows and without pressing any keys see if there is a stuck key as it will light up on this tool
    Let me know your findings
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Just purchased a WKP-1314 bluetooth numeric keypad and not working

    Just purchased a Apple WKP-1314 for my new IMAC,
    Followed the instructions and it paired right up and then lost connection, then connected and then lost connection.
    Trying to find out if some else has had this problem with the unit before I make the 35 minute ride back to the store.
    Searched this site for it found nothing hoping others are using it or tried to get some inout thank you.

    Hello:
    Before you return it, try a couple of things:
    1.  Reset the SMC.
    2.  Reset the PRAM.
    If that does not help, take it back for replacement.
    Barry

  • After upgrading to 7.8 keypad does not work when c...

    I upgraded to 7.8 today after having poor quality voice on previous version (I have a 20 mb/s connection). However I now have the problem when connected to a call system that clicks on the keypad, although apparently generating a tone, are not being recognised at the far end. I cannot therefore get to the person I need to via the call centre and have had to resort to a normal (and expensive) international call. 

    The disk folder you're describing sounds a lot like the Windows Favorites folder. That's actually completely independent from Firefox's bookmark storage.
    After your upgrade, did you freshly install Firefox? In that case, the problem might be an incomplete import of your Windows Favorites (IE Favorites) instead of an incomplete recovery of your old Firefox bookmarks.
    To see whether you still have your Firefox bookmarks, in your backup -- for example, the C:\Windows.old\ folder, or a backup on external media -- could you try to track down a folder named '''bookmarkbackups'''. By default, this is hidden folder, so you may need to turn on viewing of hidden files and folders. This article has the steps: [http://windows.microsoft.com/en-us/windows/show-hidden-files].
    Let me know what you find and then I can suggest next steps.

  • HT201210 How do I get my Iphone4 out of recovery mode if restoring the phone on numerous occasions does not work?

    I was attempting to do the newest IOS 7 update and halfway through the reboot my phone froze.  I attempted to restart the reboot by shutting the phone off but when it came back on it showed a USB cord with an arrow pointing to the itunes symbol.  When I plugged the phone in it stated that my phone was in recovery mode and needed to by restored.  When I attempted to restore the phone it "extracted data" for approximately 30 min and then stated the phone could not be found.  I tried this 4 separate times and took the phone to the local Verizon store who tried the same thing with the same results.  What do I do?

    Try this support document. It may take a number of tries http://support.apple.com/kb/HT1808

  • Numeric keypad portion of my keyboard does not work

    The numeric keypad portion of my keyboard does not work for some reason.
    I have tried pressing the "clear" button ovet the "7" key but no go. I have to force
    quit now when in InDesign if I use the number pad by mistake. HAve repaired disc
    permissions and disc, am at wits end.Please send help! Thanks.

    When pressing the Clear button over 7, also hold down Shift - i.e., press Shift-Clear.
    Also check in System Preferences > Universal Access > Mouse and make sure Mouse Keys has not become enabled. If it has, turn it off.

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

    Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

    Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:

  • Numerical Input for Sliders does not work!!

    Hi,
    I am using Logic Pro 7.1.1. For some reason the numerical input of the sliders does not work for me.
    According to Page 15 of the Logic Pro 7 Reference Manual, double-clicking on the value of a fader should bring up a little text entry box that I can enter a number into, for the value in dB that I want that fader to be set at. For some reason this does not work with the faders but does work for pan knobs.
    I know this is something that used to work in Logic 4.8 (the last version of Logic I used). Does anyone else have this problem? Does anyone have a solution?
    Thanks,
    John
    Dual 2.3 GHz G5   Mac OS X (10.4.2)   Logic Pro 7.1.1

    Cookie,
    Mine is acting like yours.
    Mitch

  • How can i make a soft return with pages shift enter does not work!

    how can i make a soft return with pages shift plus enter does not work!!

    On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

  • Keyboard volume control does not work

    I have an iMac G5, running OS 10.5.8, and a new Apple Keyboard with Numeric Keypad. My keyboard volume control does not work. Any have ideas as to why ? (I have a similar set-up at work with no volume problems.)

    Try system prefs/keyboard/keyboard/ and uncheck Use all F1, F2 etc as standard function keys.
    Other wise the volume and brightness controls will only work if you hold down the function key first (fn)

Maybe you are looking for