LR 2.6 Windows 7 64 bit - not all drives listed in browse

I am using Lightroom 2.6 on Windows 7 Ultimate 64 bit, and I have found an annoying issue -
the browse for files or folders dialog that comes up when I need to choose location for my raw files imported as .dng does not list all hard drives of my computer - it only lists contents of my user folder in drive C:/ - thus making it impossible for me to choose any other location than those within my user folder.
I attach two screenshots - 1/ Normal browse for folders dialog as it appears from within Windows explorer.
2/ Same dialog as invoked by Lightroom - with all drives missing.
Is that a bug or am I missing something?

Do you have the "Computer" icon on your desktop ?
To get it there:
http://www.howtogeek.com/howto/windows-vista/display-my-computer-icon-on-the-desktop-in-wi ndows-vista/
Hope this helps.
Frans

Similar Messages

Photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work

hi guys,
My photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work?
My OS is windows 7
RAM - 8gb
HDD - 1 TB

are you getting any errors?
and secondly and I know this from experience, ( but on 32 bit ) is it loaded already as in sat in task manager, but not actually get at able, killing the processes cures it or a reboot of course

Windows 8 64-bit not working on iTunes

Every time I try to update my iTunes it fully downloads but when I try to install it says that its not compatible with my computer. I have Windows 8 64-bit and I download the 64-bit Windows version. Does anybody know why it doesn't work?

You might try a manual install/repair.
The instructions below I've done with Windows 7 64 bit. (not sure what will happen with Windows 8 but we may learn more)
After downloading the latest version of iTunes from Apple, extract the files in “iTunes64Setup.exe”
(If you have never done this, you may need to download a program such as WinRAR [64 bit].)
Manually run each install file in the following order.
AppleApplicationSupport.msi
Bonjour64.msi
AppleMobileDeviceSupport64.msi
AppleSoftwareUpdate.msi
iTunes64.msi
If there are any errors, stop, and write back with the results.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

TS2529 Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates.

Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates. Now what? Is iPad 1 now incompatible with iTunes?

Have you tried here:
iOS: Troubleshooting backup issues in iTunes
Have you tried deleig the existing backup file? I\You can find it location here:
iTunes: About iOS backups
Saying your tried everything provides us with zero information as to what you did try.

Home Sharing Windows 8 64 Bit - Not working

Home Sharing on itune 11.0.2 stopped working. I enabled Home Sharing and I don't see shared Folder on iTunes.
Os : Windows 8 64-bit
ANy thoughts.
TIA

You might try a manual install/repair.
The instructions below I've done with Windows 7 64 bit. (not sure what will happen with Windows 8 but we may learn more)
After downloading the latest version of iTunes from Apple, extract the files in “iTunes64Setup.exe”
(If you have never done this, you may need to download a program such as WinRAR [64 bit].)
Manually run each install file in the following order.
AppleApplicationSupport.msi
Bonjour64.msi
AppleMobileDeviceSupport64.msi
AppleSoftwareUpdate.msi
iTunes64.msi
If there are any errors, stop, and write back with the results.

I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300          "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp        = "MF Toolbox Ver4.9"
CNCRFN           = "MF8300"
CNC.MDL          = "Canon MF8300"
CNC.SRS          = "Canon MF8300 Series"
CNC.DeviceDesc   = "Canon MF8300"
CNC.SPInfo       = "Canon MF8300 Scanner"
CNC.TwainDS      = "Canon MF8300 Series"
CNC.ColorGear    = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName     = "WIA Canon MF8300 Series"
greeting
Sixten

How I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone.

ITunes for Windows 7 64 bit, Windows Live Mail Contacts not (all?) syncing

I have researched this as much as I can but cannot find a solution.
I had my iPhone 4 synced to my Window Vista Home Premium PC using iTunes just fine until January when the PC motherboard crashed. No data was lost and all contacts have been restored to my new PC with is Windows 7 Home Premium (64 bit). My contacts are in Windows Live Mail (Windows Contacts) and I'm syncing via iTunes with "Sync Contacts with: Windows Contacts" selected.
However, not all contacts are syncing with my iPhone. In fact, I'm not sure they are syncing at all, although the sync function goes through. It may be that the only ones that sync are those that existed before the new PC (i.e., the Windows Vista contacts which were in Windows Mail). I have created new contacts on both the PC using the new version Windows Live Mail and on the iPhone since the crash, and would like to get them synced up.
Symptoms:
1) Some specific contacts on PC are not on the iPhone after multiple sync attempts.
I have so far positively identified one contact that did not sync. It shows in Windows Live Mail under Contacts, however it does NOT show up in my Windows username/Contacts folder!
2) One Contacts group on PC is not on the iPhone, although two others are (they probably were from before the crash).
I have so far positively identified one group that did not sync. It shows in Windows Live Mail under Contacts groups, however it does NOT show up in my Contacts folder as a .group file!
3) The same group as #2 also does NOT show up in the iTunes group list under "Selected Groups" on iTunes, but the other two groups do. (I do not use "selected groups" because that disables "all contacts" syncing, but the groups are visible grayed out on the list.)
4) As a test, I created a new contact on my iPhone, synced, and it shows up now in Windows Live Mail Contacts; it also shows up in my Windows username/Contacts folder.
5) As a test, I created a new contact in Windows Live Mail and it does NOT show up in my username/Contacts folder. I synced the iPhone again and it does NOT show up on my iPhone contacts.
OK folks, where are these missing contacts going and how can I get them synced?? Thanks!
PS: I have the latest iTunes 10.5.3.3, no updates are available. However, Apple Support/iTunes seems to suggest Windows 7 64 bit either "does not use Windows Contacts" (which seemed quite wrong until I ran the tests above), and also that Windows 7 64 requires iTunes 10.4.1, which I cannot install because I have a later version installed. I would have assumed the correct version installed for my OS when I installed iTunes on the new PC. iTunes runs fine by itself and in coordination with my iPhone other than the above issue.
PPS: This site seems potentially relevant, however is highly technical: http://liveunplugged.wordpress.com/2011/02/04/windows-live-mail-contacts-databas e/
but doesn't help with this problem.

I didn't get any help on this from the forum, but from studying around and experimenting with different approaches, I have come up with the following conclusions:
Under Windows Vista, Windows Mail synced its contacts with Windows Contacts [which are in c:\users\username\contacts]. iPhone via iTunes synced with Windows Contacts. Changes to either Windows Mail Contacts or iPhone contacts would always update each other. Life was good.
Under Windows 7, Windows LIVE Mail (WLM) does NOT sync its contacts with Windows Contacts. It puts them into a hidden database. If you have prior Windows Contacts and brought them along for the ride, they are still there in the folder but they are not connected to the WLM contacts database
When you first set up Windows Live Mail, you can import your Windows Contacts and they appear to be synced. (In fact, they are, but only at that single point in time.)
If you change any Windows Live Mail contact or add a new one, it does NOT change in Windows Contacts. It only changes in the WLM contacts database. It therefore does NOT sync to your iPhone.
Similarly, if you change a contact on iPhone or add a new one, it will sync with Windows Contacts. However, this does NOT update your Windows Live Contacts.
So, from what I can tell, here is what this means: to maintain a steady state, you have two choices:
Whenever you update or add a contact, add it in either iPhone or Windows Contacts [the Windows Contacts folder has a "New Contact" button], and they will stay in sync with each other. Then manually update or add it in Windows Live Contacts to keep those up to date so you can use them for e-mail. OR
Whenever you update or add a contact, add it in either iPhone or Windows Contacts, and they will stay in sync with each other. DO NOT manually update Windows Live Contacts, but realize they are not always up to date. If an address needed for an e-mail is not in there, manually retrieve it from your Windows Contacts or your iPhone and insert it into the e-mail. [Having done that, you can right click on the address in the e-mail and add it to your WLM contacts if you want.] Periodically, manually delete all of your Windows Live Mail Contacts and then re-import your Windows Contacts into Windows Live Mail and, voila, your contacts are in sync again! (Isn't that great, I mean really awful??)
NOTE: If you follow course #2, DO NOT import your Windows Contacts into Windows Live Mail contacts without deleting your existing Windows Live Mail contacts, or you will end up with a double set plus the new ones.
FURTHER NOTE: I obviously can't make any guarantee you won't lose data if you follow course #2. Be sure you have a complete backup before deleting your WLM contacts. However, I will say that after experiencing a double set of WLM contacts (by failing to understand the first NOTE above), it was impossible to pick out the new items [WLM will now show you the date of entry or modification of the contact, so you can't sort by date], so I deleted all of them and re-imported my Windows Contacts and had a complete set again.
AND ONE FINAL NOTE: I have not tested how any of this affects Windows Live Contacts used online outside of Windows Live Mail, because I do not use Windows Live online.
Please post further comments if you have any more information on this topic.

Windows 7 64 bit not monitoring on UCCX 7.0(2)

Hi,
I upgraded a 7.0(1) system to 7.0(2) to get support for Windows 7 and CSD is still not able to monitor agent calls who are on Windows 7 64 bit OS versions. The 7.02 release notes document states WIndows 7 is supported and WoW64 but doesn't mention anything about any limitations that I can see. I've ran postinstall, etc and everything checks out.
In this document, it states Windows 7 / WOW64 suppoort for 7.0(2) but has note for 8-0 that montoring is not supported for WOW64 just for 8.0.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps7282/product_bulletin_c25-563280_ps427_Products_Bulletin.html
So is there a special way to install CAD / CSD as WOW64 on Windows 7 64 bit, or is there something else going on preventing the monitoring not working for windows 7 agents? The supervisors can monitor Windows XP agents just fine, except for one agent which we're working on the agents PC to see whats going on.

There is no special way to install CAD, it is just a msi file. On both my Windows 7 professional machines it installed fine. I have remote access to a couple of the customers machines so I have tried uninstall/re-install. I did not want to patch the registry in case I BSOD their machine. If I was on site I would have a go.
The customer has around 180 machines running Windows 7 ultimate and none of them have installed the correct packet driver.
The install program must detect if this is a 64 bit OS and install the 64 bit driver, or in some cases maybe not.
If your machines have installed the correct driver there is a test program. C:\Program Files (x86)\Cisco\Desktop\bin.
Make a call from the agents phone, internal is OK and then run NICQ.exe its output is written to a file called NICQ_Output.txt
Graham

Laserjet 4 - C2001A, Windows 7 64-bit, Not printing

I have a C2001A (Laserjet 4). I had it completely rebuilt a year ago as it is a great machine. My previous computer started having problems, so I bought a new one with Windows 7 (64 bit), and now the printer does not respond. I bought a USB to parallel cable and followed all of the various directions from the HP site and the Windows site to no avail. There has to be a solution to this problem...what is it? Please help! The printer works fine with Windows XP on my old computer.
I also tried deleting the driver, hooking up the cable, turning on both units, and the computer recognized a new device and downloaded a driver. When I tried to print, the printer didn't even blink. This is the same result I had with all of the other things I tried. Thank you in advance for any assistance you can provide.

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

HP Deskjet 3920 driver for Windows 7 64 bit not available anywhere

Printer HP Deskjet 3920
No drver software is available for operating system Windows 7 64 bit
This is the 4th week since I started search.
This question was solved.
View Solution.

Hello I am an employee at HP and I just replied to another person on the same type of problem. I don't know if you already did this but I had the same problem on a different printer and it worked for me. You have to have the printer turned on and hooked up to your PC and then do a Windows Update. With Win7 update the process will see that you have the printer and need a driver and should give you the option to download it. You can then select it and download it and it should work. Here is also the text from the HP website. I hope this works for you.
NOTE:When you connect the USB cable to the printer, and then to the computer, Windows 7 activates Windows Update. Windows Update searches online for the most recent product driver on the Windows Update site. If the online driver is more recent than the driver stored in Windows 7, the computer downloads and installs the updated driver.The Windows Update process takes place automatically. Therefore, you might not notice that the process is in progress.

Windows 7 64-bit not loading USB mass storage driver

I have a rather strange problem with my Windows 7 Ultimate 64-bit. Everything seems to work fine except for USB mass storage devices. I have USB keyboard, mouse and even a USB audio (wireless headset) all working fine on the computer. But
any USB external drive, thumdrive or USB card reader with flash cards inserted into the USB port of my computer won't work.
Windows keeps reporting that it is unable to find the driver. When I go into the Device Manager console and choose to manually update the driver, then point it to the C:\Windows (with search for sub-directories enabled), it detects the USB Mass Storage
driver but complains that it is unable to load it. The exact message is this: Windows found driver software for your device but encountered error while attempting to install it. USB Mass Storage Device. The system cannot find the file
specified.
This happens to ALL USB Mass storage device, and it doesn't matter which port I plug the device into.
Here's the weird thing, I have VMware Workstation installed on this computer and if I power on a VM that runs Windows 7 32-bit as the Guest OS and connect the USB storage devices to the guest OS via VMware Workstation, the USB storage devices work!
So it would appear that the USB ports are functioning properly but for some reasons, my Windows 64-bit is unable to load the driver.
Any idea how to fix this besides a "nuke it from orbit" and format/reinstall Windows?
Thanks.

I'm very excited to finally have a solution for this problem. Thank You Balaji for figuring this out. I've been struggling with this for a number of years, and had only one USB Hard Drive that worked. I too have VMware workstation, and had the missing files
in "c:\windows\inf." I can say with certainty that I did not delete the files from that folder, but something is common in both of our situations. Maybe it has to do with VMware, and some of it's updates over the years. I'm also using nCompute to share out
a networked desktop via the wire.
One more thing worthy of mention is this machine was an update from Windows Vista, and the USB hard drive that worked was configured back than. So although I could never add another HD, at least I had the one.
Now with having copied over the files, I can plugin other USB enclosures with different drives and they too are working.
Like you mentioned, it was always possible to use USB devices within my Virtual Machines, so it was clear that the USB ports were functional. I actually got the files from a clean Windows 7 VM, copying out the \windows\inf folder and doing a compare between
the the real one and the virtual one. I found the two missing files you mentioned, along with 8 others. I went ahead and included them all in your fix.
It worked, Amazing. Thanks again. :O)

F4280 wireless printing windows 7 64-bit, not showing printer in "devices and printers"

Hi,
I am a little confused. Today I installed windows 7 64-bit on my acer 9423wsmi notebook. I installed my hp f4280 via a usb cable. It prints and scans. Now I try to install my wireless kit (came with the printer) which worked fine an vista 32-bit sp1. I looked up every driver etc. on hp.com and found the install guide for windows 7. Everything went as described and printing works even without the pc adapter. You might say what is the problem. Well I noticed the wireless (copy) isn't listed under "devices and printers". I found this a bit strange. I tried to install a printer via the windows wizard. But using the network option gives me the shared copy. And using a the usb02 virtual port to which the printer is connect yields the same result: a fully working printer but nowhere to be found in "devices and printers". I searched the internet for a solution but my search results get cluttered with support for the installation.
My questions:
Is this normal on this system with these settings?
Is there a way to let the printer appear in "devices and printers"?
Kind Regards
Carnelain

Hi Flash,
I still haven't fixed the problem. I assume you found this installation guide. If I follow this I still can't see the printer in "device and printers". But when I open a document (notepad, word) I can see the printer listed in the printer dialog. So I am able to print. Printer properties are a bit hard to reach but it works. I am still hoping some wizz kid from hp to come up with a solution . Keep me posted if you know something more.
Carnelain

RMBP, Windows 7 64 bit, thunderbolt external drive

I finally figured out how to install and run Win 7 off of my thunderbolt drive (seagate).
the rMBP requires a FAT partition to be created on the interal SSD. If you use bootcamp utility it creates a huge 20GB partition. I was able to create a small FAT partition on the internal SSD and then proceed to install and run win 7 off of the external thunderbolt drive.
PROCEDURE:
1. run diskutil command:
Code:
diskutil list
you will need to know if your internal SSD is disk0 or disk1 (in this guide it was disk0
2. Create the small partition:
***my ssd is a 512 GB drive, you can break down the partition here ***
Code:
diskutil resizevolume /dev/disk0s2 494G MS-DOS FAT 5G
3. Within Mac, create a single msdos partition on the external thunderbolt drive. (GUID or MBR)
4. for the rMBP, use the Bootcamp assistant utility to create your USB windows 7 installer from an iso and also with the bootcamp drivers.
5. Reboot and press the option key at the chime.
6. Choose the windows installer
7. at the drive screen of the installer you will see your 2 drives. drive0 maybe the external. Format the external drive ntfs and then install to the drive.
8. On reboot and eventually install bootcamp drivers.
Trial and error:
I tried install without internal partition and received 0x8030024 error which in some of apple forums can be overcome by removing the main drive. I did this but installer would freeze.
Good luck. If you need any help let me know.
see forum for complete disscussion
http://forums.macrumors.com/showthread.php?t=1414769

I have a related question. I have a 2012 top-of-the-line iMac with Thunderbolt, and I already have the internal SSD partitioned into both Mac and Bootcamp running Windows 7 64 bit. The internal hard drive is also partitioned into both mac and PC hard drives I just added a 4 TB external Thunderbolt drive (Seagate Backup Plus using the external Seagate Thunderbolt adapter/dock), and I do NOT want to install Windows bootcamp on the external drive - I just want to partition it so that the Mac has access to 2 TB and Bootcamp has access to the other 2 TB. Using Mac Disk Utility, I can easily partition it, although I can't format the PC side into NTSF. However, when I startup using Windows, it doesn't seem to recognize either of the external hard drive partitions that the Mac side already recognizes. The Mac side even assigned little icons (automatically) to both partitions showing the Seagate harddrive docked in its little Thunderbolt adapter/dock. The PC side didn't assign icons, and didn't recognize either partition UNTIL I WENT INTO PC DISK MANAGEMENT AND FORMATTED THE PC PARTITION AGAIN, as NTSB. Now the PC side recognizes the Windows Partitions, but still doesn't recognize the Mac partition - it says that partition hasn't been formatted yet. Oddly, the Mac side still recognizes both partitions even after I changed the PC version. So what's going on here? Does Windows require some sort of Thunderbolt driver in order to correctly recognize an external hard drive that Mac Disk Utility has formatted? I didn't have this problem on the internal hard drive that come in my iMac - it's recognized easily by both PC and Mac.
I am using only the Windows NTSF partition on the external hard drive at the moment. I transferred all my Steam games to it as an experiment (about 350 GB). The games are running just fine, but it seems that the frame rates and speeds are slower than they were on the original internal hard drive. I bought the external Thunderbolt drive because it was supposed to be faster.
Anyone have any suggestions?
Any help on this matter would be appreciated. Thanks!

Using PDF Printer in XP Mode within Windows 7 64-bit (need x86 driver)

This question was asked before and there was no response. (See http://forums.adobe.com/thread/782430 )
I have practically the same question.
My desktop has as Windows 7 64-bit on it, and Adobe Acrobat X installed on it I have an application that I have to run in XP Mode.
How can I install the print driver in both places without buying another license? They are running on the same machine.
I tried to connecting to the shared PDF Printer using a network printer, but Adobe Acrobat only installs the 64-bit driver, and the XP Mode needs the x86 driver installed.
I found that I can go to the printer properties and it has an option to add the X86 driver but asks for the .inf file.
I believe this version of Acrobat came as part of a bundle, but not positive. Can't find a disk anywhere and also looked for a driver on my PC. No luck.
I know this is a fully licensed product. So anyone know where I can find the driver?
John

How is Acrobat 8 not fully Windows 7 compatible? I see discussions on this Adobe Community saying how Acrobat 8 does work on Windows 7 and with 64-bit. It appears that if Acrobat 8 is updated to the latest version, then this should fix AA8-Win7 issues. And I am at the latest AA8 version, 8.3.1.
And how are Acrobat 8 and Reader XI are not compatible? I have always had Acrobat and Reader installed on the same PC, without ever having any issues. And Adobe allows the installation of one after the other. So apparently Adobe allows them both to exist together. If they are incompatible, then why would Adobe allow them to exist together?
Anyway, I did uninstall the FileOpen Plug-in and the Reader XI, then reinstalled the FileOpen Plug-in. So now Reader is not installed and only Acrobat 8 is installed. I then tried to load the PDF file, but I still get the Acrobat 8 error described above.

LR 2.6 Windows 7 64 bit - not all drives listed in browse

Similar Messages

Maybe you are looking for