LR (2.7) and Nook ebook reader Problem

I recently purchased a Barnes and Noble Nook to read ebooks on.
The problem is that when I plug the nook into the computer, LR (2.7) starts up and tries to import photos.
I deleted the only "photo" file from the Nook (a book cover image) figuring that would solve the problem, but now LR starts up and displays a message "There are no photos to import". (WELL DUH!!!)
I also checked in my LR preferences, and opening import dialogue when a memory card is inserted is still unchecked.
Any solution? It is rather annoying!
(And yes - Barnes and Noble did say it was an ADOBE problem, not a NOOK problem.)
Thanks,
Steve

Change your autorun settings for the device in your OS. LR is an innocent bystander in this case.

Similar Messages

  • Since I installed the last Mavericks update, my MacBook Pro will not recognize my Nook ebook reader

    Since I installed the last Mavericks update, OS 10.9.2, my MacBook Pro will not recognize my Nook ebook reader.  Maybe it's a coincidence; maybe not.  Any ideas?

    Check the Barnes & Noble or Nook websites to see if there are any Nook driver or software updates for OS X Mavericks.

  • Zire 31 ebook reader problem

    I've been using a program labeled arpos_winv20enu (file version 2.11.15.0) on my Zire 31 for a few years now.  I started using it because no other software would read italics on my device.  Everything worked well together for a while and then I couldn't Hot Sync without running this software each time, no matter what I did.  I didn't care as long as I was able to get my ebooks on my Zire.  Now, however, when I try to run this software it won't go through the Wizard application to completion like it's always done before.  Nothing happens whatsoever, so now I can't Hot Sync at all, put new books on my handheld, etc.  I don't remember now where I even got this software to redownload it, though I do know it had to be either information from forums here or at Adobe, so I'm leaving messages in both places hoping to find an answer to the all-around problem.
    Does anyone know if this software even still exists?  If it does, do you know where I might get it again?
    Or is there new software that will now read italics for the Zire 31?  I know that was an issue a few years ago and that's what led me to the current software I use, but since I've been happy, I haven't checked any further.
    Or is there just another solution altogether that will help with my italics problem?
    Any help is appreciated!
    Thanks!
    Sandy
    Post relates to: Zire 31

    You are referring to Adobe Reader for Palm OS.  It pobably is on your install CD that came with your Zire 31.  If not, you can download it free from Adobe by selecting "Palm OS" on THIS page.
    This program converts pdf files to a form the handheld can view, but it hasn't been updated by Adobe in a long time.  You can try a free newer program that reads native pdf format (you would use a card reader to transfer the files to your flash memory card.  The program is called Palmpdf and is available HERE.
    Good luck.
    Post relates to: Palm TX

  • Windows 7 64-bit: Switchable graphics and Ricoh card reader problem

    Hi guys,
    Two problems with my laptop. I'm using a T400, previously installed with Windows Vista Business 32-bit.
    Switchable graphics worked well until I formatted and installed Windows 7 Pro 64-bit (I got the RTM through MSDNAA). Now, Windows can only detect either the discrete graphics or integrated graphics at one time. When the BIOS was set to switchable graphics and enabling the detection of switchable graphics on Windows, it could only detect the Intel integrated graphics. When I try to switch to High Performance graphics through the Lenovo power manager, the screen flashes once, and the ATi graphics card appears on the device manager with the code 10 error (cannot start device). Also, compared to this image, my power manager window that opens with left-click does not have battery stretch and switchable graphics options. I have to right-click to switch my graphics.
    After some tinkering, I managed to activate the graphics card through the BIOS by switching it to discrete graphics only and disabling switchable graphics detection by Windows. Now the device manager shows the ATi card only, the Intel integrated graphics is gone. I understand that it should show both display adapters in the device driver when the ATi card is active: http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html#g4
    The second problem is with the Ricoh card reader. I managed to install the drivers properly, but the device shows up with a code 12 error (This device cannot find enough free resources that it can use) in the device manager. That error appears on 6 items in the device manager:
    Ricoh Memory Stick controller
    Ricoh SD/MMC Host controller
    Ricoh xD-Picture card controller
    Ricoh 1394 OHCI Compliant host controller
    Ricoh R/RL/5C476(II) or Compatible CardBus controller
    SDA Standard Compliant SD host controller
    Additionally, 6 error messages appear during every boot up, which I think is related to these 6 devices:
    ERROR
    Resource Conflict - PCI in slot 07
    Bus:15, Device:00, Function: 00 (it ranges from function 00  to 05)
    AND disabling the device through device manager results in a BSOD.
    I've seen some people post about the Ricoh problem, but didn't have any resolution (at least for those who had the boot up error message too). The switchable graphics problem seems quite common too but in my case it seems like it is working fine EXCEPT for the fact that only one graphics adapter can appear on the device manager at one time and I can't do switching at all. Anyone know if I can somehow solve this? Sorry for the wall of text and two-problems-in-one. I put them together because I don't know if one problem is affecting the other as both problems appeared at around the same time.

    As far as the graphics goes it's well accpeted the only way at present to switch is though the bios manually. There is currently no drivers that enable users to switch from within Win7. Know it's a pain but will just have to wait.

  • Xsi:schemaLocation and repository write , read problem.

    I registered the schema which had targe namespace.
    I checked it out with EM XML Schema.
    schema url : http://www.xbrl.org/2003/xbrl-linkbase-2003-12-31.xsd
    Owner : FINESUSER
    Scope : PUBLIC
    first part of the schema text from EM
    <?xml version="1.0"?>
    <schema targetNamespace="http://www.xbrl.org/2003/linkbase" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:link="http://www.xbrl.org/2003/linkbase" xmlns:xl="http://www.xbrl.org/2003/XLink" xmlns:xlink="http://www.w3.org/1999/xlink" elementFormDefault="qualified" xmlns:oraxdb="http://xmlns.oracle.com/xdb" oraxdb:flags="307" oraxdb:schemaURL="http://www.xbrl.org/2003/xbrl-linkbase-2003-12-31.xsd" oraxdb:schemaOwner="FINESUSER" oraxdb:numProps="86">
    I got a wierd situation when I tried to write the xml document which conformed to the schema with schema location hint
    first part of the xml document
    <?xml version="1.0" encoding="UTF-8" ?>
    <linkbase xmlns="http://www.xbrl.org/2003/linkbase" xmlns:xbrli="http://www.xbrl.org/2003/instance" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.xbrl.org/2003/linkbase http://www.xbrl.org/2003/xbrl-linkbase-2003-12-31.xsd" xmlns:krfr-pte="http://www.xbrl.or.kr/kr/fr/common/pte/2006-05-31">
    I guessed I successfully writed the xml document into repository with windows explorer using WebDAV protocol.
    but I realized that something was wrong when I tried to read the document from repository clicking the xml document using WebDAV from repository.
    I got a 404 error. I tried it to get from http but only got a 404 error.
    I tried further to read it with JDBC , only failed.
    finally I tried this query. but I got nothing.
    SQL> select extract(r.RES,'/r:Resource/r:Contents/*','xmlns:r="http://xmlns.oracle.com/xdb/XDBResource.xsd"').getClobVal()
    from resource_view r where equals_path(res,'/FINES_REPOSITORY/linkbase/label/kisinfo-ratio-2007-02-09-label.xml') = 1;
    EXTR
    1 rows selected.
    but I happend to succeed to write and read it when I changed the xsi:schemaLocation declaration to incorrect name or omitted it out,
    xsi:schemaLocation="http://www.xbrl.org/2003/linkbase http://www.xbrl.org/2003/xbrl-linkbase-2003-12-30.xsd -> incorrect name
    or
    omitted it out
    what's happening ?
    I'm positive that the xml document is valid , I check it with XMLSpy.

    Since you are working with XBRL I would strongly recommend upgrading to 11g at the earliest possible opportunity. If you can send me your taxonomy and instance documents I will check the query out in 11g.

  • Problems with authorizing ebook reader

    Hello!
    I bought a Kobo ebook reader. When I try to authorize my reader via ADE with my Adobe ID I get an error message "activationserver error, Code:E_AUTH_NOT_READY". I need to authorize it to copy ebooks on it. What should I do? Is it a problem of ADE?
    Thanks a lot for your help!

    The definition of 'insanity' is trying the same thing the same way over and
    over, and expecting a different result.
    I had the same issue - and eventually I was able to get through.  If your
    computer has both a LAN interface and wireless, try whichever one you are
    not using normally and see if that changes anything.  Sometimes it does -
    sometimes not.
    Sorry I can't offer any other suggestions!
    ============

  • I have a Windows 8.1 machine.  I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

  • I forgot my password for an ebook I purchased and can't read it - help

    I bought an ebook online that is a pdf file.  I must have put a password on it when it was purchased.  I bought it in 2008 and haven't read it in a while.  When I tried to open the file, I didn't remember the password and can't open it.  Is there anyway to get my password?  All I want to do is read my book.

    Go back to the company you bought it from and request your password from them. I would think it would be on file.

  • I'm having problems opening my pdf files. I'm running windows XP and have adobe reader XI (11.0.06)

    I'm having problems opening my pdf files. I'm running wiondows Xp and have adobe reader XI(11.0.06) installed.

    What kind of problems? What happens when you try? Any error messages?

  • Initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
    Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
    Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
    Open cmd prompt and type "cd c:\temp".
    Launch the browser and open the PDF.
    Open task manager, sort processed by name. Two AcroRd32.exe instances  should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
    On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
    Perform your steps to cause the crash.
    Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
    Thanks in advance for all your help
    Ankit

  • New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    Sounds like you somehow got the mac version.
    Download the windows 6.7 camera raw update from this link:
    Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

  • Adobie Reader problem using OS Vista and IE9

    Operating System = Windows Vista
    Browser = IE9
    Adobe Reader long use without problems.
    Previously click on link within web page and view text.
    Now only white space and no text.
    Deleted and reinstalled Adobe Reader with version 10.1.3.
    Problem remains.
    Works appropriately on Google Chrome and Mozilla Firefox.
    Would appreciate any suggestions.

    Does that happen with every online PDF, e.g. http://helpx.adobe.com/content/dam/help/attachments/Acrobat_Reader_ReleaseNote_10.1.3.pdf ?

  • Hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help

    hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
      - Make an appointment at the Genius Bar

  • I have bought ebook from itunes and i can read it on Ibook on my Iphone,but I want to read book on my macbook what should I do?

    I have bought ebook from itunes and i can read it on Ibook on my Iphone,but I want to read book on my macbook what should I do? please help me

    ...which is a real shame. I 'married' Kindle very early on, so that's my format of choice. I like being able to read on my e-reader or computer. I find it very odd that Apple hasn't come up with a Mac reader for its eBook format.
    Clinton

  • Authorization problem with computer and Nook

    I am tryng to transfer an Overdrive book from my computer to my Nook.
    I received a pop-up that said that I could only read the book on the computer because the Nook was not authorized.
    However, when I went in to authorize my computer it said that that Adobe ID already existed.
    This is the only computer that I have had and I have not exceeded the 8 device limit .
    So, why cannot  I get it to authorize my computer and Nook?

    ADE often gets its authorization confused.
    First return the library book ~ it is probably now authorized with the mixed-up id, and you might not be able to return it once your proper ID is registered.
    Clear any old authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
    Restart ADE.
    Try again to authorize ADE with your Adobe ID.
    Then you should be able to set the ID into the Nook as well; and borrow the book back again.
    Good luck ~ what a rubbish implementation of DRM Adobe has produced....

Maybe you are looking for