LR 3.2. Can't edit in PS with LR adjustments?

When I select 'Edit in PS4' there is no option to edit with LR adjustments, & though I've selected edit as TIFF it opens as a CR2 file without any adjustments.

You should set up Photoshop as a secondary editor. Then Lightroom will render for you using the format you selected. Otherwise it will send the raw file directly with the editing instructions to Photoshop. It will render the adjustments that it knows how to, but since LR 3 is only fully compatible with CS5, it won't render it the same. Lightroom should offer to render it for you as it did in previous times there was a version mismatch, but for some reason it doesn't. I'd consider that a bug.

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product? We are in full wedding season and am a little frustrated. Photo mechanics opens them right up to download them. I am using the Nikon software to convert them

I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product? We are in full wedding season and am a little frustrated. Photo mechanics opens them right up to download them. I am using the Nikon software to convert them into tiffs. when is the camera raw update coming out. I am not the only photographer with this issue check out all the chatter about it.

This happens every single time a new camera comes out from one of the two big camera makers. Nikon and Canon do not send preproduction units to Adobe, so Adobe has to go out and buy a D750 or whatever from the store to test and profile it before they can update Lightroom. They can't get one earlier than you and I can. The profiling is quite an extensive operation. Other camera makers do send preproduction units, use dng, or do the profiling in-house and there you often get support right from release. If camera makers would finally embrace an open raw format such as dng, this whole problem would be gone but both Canon and Nikon seem to think they live in an upside-down world where their clients only use their software.
Usually the dead period only lasts a few weeks but it is frustrating nevertheless. My only advice is to not buy a new camera at the day of release and expect to have third parties to support it. You definitely should not be buying these cameras right away if your business depends on it. Aperture, Capture One, etc. have the exact same problem. No third party (read non-Nikon in this case) will support the camera from the release date. Some are quicker than other adding support. Adobe is somewhere in the middle of the pack in this respect. Nobody outside of Adobe knows when an update comes out. Could be tomorrow, could be a few more weeks or a month. They might jump straight to Lightroom 6 and never add direct support to LR 5. Sometimes they will first bring out a beta version of dng converter that will convert the new camera's nef files to dng, which will work fine in the current Lightroom before updating Lightroom itself.

Can I edit PDF drawings with Ink & Slide

Can I edit PDF drawings with Ink & Slide

Adobe Ink and Slide are designed for use with specific CC mobile apps. Acrobat and Adobe Reader are nothing to do with CC.

LR3 - Cannot edit in Photoshop CS4 ("Edit a Copy with Lightroom Adjustments")

Having just purchased LR3, it seems that when I select "Edit a copy with Lightroom Adjustments", that the LR adjustments aren't being carried across into CS4. I am only given the original file in PS.
Is this a known bug?

So what do you think might be the problem, Dorin?
I don't know. I haven't seen a bug (assuming it is indeed a bug, and not an operator error) like this is mentioned here in the forums.
This issue is going to affect my business in a major way.
If this is so critical to your business, you can use a workaround meanwhile.
Use the regular export command with the following options:
File type: PSD/TIFF; other relevant filetype options.
Location: same as original photo.
Add to this catalog: checked. Stack with original: as needed.
Post-processing: open in Photoshop.
Save this as an Export presets and invoke it from the File->Export with Preset from the menu.
The end result is the same as Edit in Photoshop.

Can't edit ps6 file with ITC Zapf Dingbats in cs6 extend.?

Dear sir/madam,
I had worked out a psd file within ITC Zapf Dingbats font. But now I can't edit it in new purchased Ps Cs6 extend. Can you help me to copy the font from my older Xp laptop (Ps6) to the newest Win7 laptop (Ps Cs6)? Many thanks.
Best Regards,
Benson Yang

At least on both my windows 7 and windows xp machines it looks like that might be a font that an adobe program installed.
Maybe adobe reader or acrobat, but my guess is an older version of photoshop like yor photoshop 6 installed it.
I say that because the font is in the C:\Program Files\Common Files\Adobe\Fonts\Reqrd\Base\PFM folder (windows xp), although the name is not obvious (it's a postscript font as Mylenium wrote), so it may well be
a commericial font because i know they sell it at the adobe store.
Oh it's called i believe ZD______.PFM

Can you edit CRM records with {Tag_edit}

Hi,
I 'm wondering if I can edit my records with {tag_edit)
I can edit the web apps , but when I include the {module_firstname} and edit it. It wont edit the record in CRM.
So I wonder if there is way to do it?
I don't think it will be through web app.
What I'm aiming for is that web user can edit their own information throught a secure zone.
For example. I have created website , with back end. Custom back end. Once the user is registered. He can alter the details.
With out loggin in to admin panel and edit the record in CRM.
Any suggestions would be appreciated.
Thanks
Kind Regards
Jiri

Hi Matt,
Thank you, that what I needed.
Next question.
Could you point me in a right direction. How would I be able to make progress bar? with 5 stages and when I hover over it would tell me some informations.
I have thought of web app. But i'm not too sure now.
Any help will be appreciated.
Thanks
Kind Regards

How can i edit songs quickly with shortcuts?

I want to edit my song tags in the main table view.
Can I swap the columns with tap?

You can move the columns in list view by dragging them where you want. The View Menu > Vew Options lets you select which columns are displayed. You can select a song or a group of songs, use the File menu > Get Info and edit the songs in the "Get Info" or Multiple Item Information windows.

Can I edit PDF files with PDF Pack?

can I receive an PDF file and make changes to that file with my Adobe PDF Pack. and then create attachments to this file once i have completed the changes?

Hi maddog#1,
Adobe PDF Pack doesn't allow you to edit a PDF file; you need the full version of Acrobat for that.
Please let us know if you have further questions.
Best,
Sara

Can't edit video taken with iPhone 3GS?

I have a .MOV file taken with an iPhone 3GS. I've saved it to my desktop, and opened iMovie '09. First problem is it won't let me drag and drop the movie into the project area; it just bounces. Then I tried the explicit import function. Now the movie is in the bottom window area (as a "New EVENT"), and I can scrub through and play it, but if I select a portion of it the "trim to selection" is greyed out.
How am I supposed to edit this video?
Thanks in advance!

Okay, I figured it out myself. In case someone else runs into this:
Use the explicit File->Import function to get the video into the bottom window area.
Select the portion of the video you want to keep.
There's a button to the left on the row of buttons just above the bottom window area. That adds the selection to the project. Now you can work with it.
Hope that helps some other iMovie newb.

Can't Edit While Encoding With Media Encoder

Does anyone else get this happening to them:
When I begin the encoding process with Media Encoder, then go back to editing in Premiere Pro CC, EVERY time I hit the space bar to play a clip, Media Encoder Pauses its Encoding. Then when I stop playing the clip in Premiere Pro, Encoder begins encoding again. I'm fairly positive that Adobe touts that you can be encoding and editing at the same time, but I can't believe that this is happening. Anyone else?
Also, Encoder refuses to use my destination folder preference, instead targeting a folder I had used long ago and I have to manually target for every encode, every day.
THANKS!!!

Encoding is a real CPU/disc hog ... heh, it's an intensive process. Trying to both encode and playback in real-time ... um ... if you've got a rig with say four CPU's with 128GB RAM, two really hot v-cards that the Adobe program actually love to play with, and all programs/cache/footage/outputs on RAIDed SSD internal drives, you can maybe do both at the same time.
Think about what playback is doing ... it's not just playing the video off the disc ... not hardly. It's taking bits of video from this spot on the disk, skipping to this section of another video file there, to that one here ... and while doing that it's also immediately "reading" whatever changes you've made in editing, whether sound, size changes, color/grading, masks, EVERYTHING ... and applying that to the video it's grabbing of a disc somewhere AS it is playing it. Using a ton of CPU, disc read/write throughput, and probably a chunk of the v-card's GPU & vRAM. What's left for AME to use?
I've seen a lot of complaints around here as to why editing playback isn't smooth ... hey, in VLC, play that file, it plays back easy, what the * is PrPro doing?
Um ... VLC is playing the "straight" file, PrPro is playing back the file with all the other stuff added to it ... which isn't yet added to the file in reality, it's only instructions as to what to do to the file. So ... PrPro is essentially doing much the same work as when AME renders to an output simply to play the file in the program monitor.

Can DW edit sites built with Frontpage extensions

I have to work on a site that was originally created by
someone who used frontpage and frontpage extensions. Im basically
just redesigning the layout our outer shell, and adding all the old
data inside the design.
There are about 20-30 forms in this site that were created
using frontpage extensions.
Is there a way I can edit the forms pages in DW without
messing up the forms or frontpage extensions?
Does DW offer any easy user interface to create forms like
this FP extensions?

> Ive heard that
> conecting via FTP to a frontpage site could also mess up
the coding, which
> seems odd to me. ??
It doesn't, and couldn't, affect the coding. But it can
'break' the tight
connection between the files on the site and the FP server
extensions, which
would have the immediate effect of breaking the form
processing.
If you must take this job then I think the only "SAFE" way to
do it would be
to use Microsoft's ExpressionWeb product for the project. EW
understands
how to keep the FP Server Extensions healthy, and can
therefore use HTTP
transfers of files rather than FTP transfers.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"fotofx7" <[email protected]> wrote in
message
news:ful2cu$lit$[email protected]..
> Thanks for your quick reply Murray. Unfortunately, I do
not have that
> option.
> What if If I was to open the graphics that are currently
on the forms page
> in
> pohotshop and make them match the color and type font of
the new design,
> than
> just upload those images to replace old ones, this
should update the forms
> pages look. This way I won't have to even bother opening
the forms pages
> and
> mess up the code.
> Would connecting to the site via ftp and just upload new
images to
> overwrite
> old ones work without messing the FP forms coding up?
> I can get by just revamping the home page and uploading
that with links to
> other pages and that should get me by for now.
> Am I missing anything or would this plan of attack work?
Ive heard that
> conecting via FTP to a frontpage site could also mess up
the coding, which
> seems odd to me. ??
> Thanks for your input.
>

Can't edit old project with upgrade

I created a project in an older version of imovie (not sure which, it was 2001), now I have upgraded, and am trying to open this project, it appears in the upgrade, but I am having trouble editing a few clips, all I want to do it change the words, but the clips don't show up on the side panel. Can anyone help me. Thanks so much!

Let me rephrase my question, so hard to explain, I have a clip with some text in it (in main window, still dont see orginal clip with your suggestion) , when I am on that clip and go to Text, the text doesn't show up, it allows me to add new text but not change what already exists, it seems like it's in a deeper layer or something. It worked in a previous clip and showed up and I changed text there, but can't here for some reason. Does that make any sense?
Thanks for your help.

[SOLVED]Can't edit .desktop files with Gnome 3. Application disappears

I've been trying to edit the desktop file for gimp so that I can run a custom command when it loads.
Basically I want to run GTK_MODULES= gimp instead of just straight gimp, because the global menu doesn't work well with gimp and running it in this way forces gimp to use the normal menus.
As soon as I edit the file, gimp disappears from my applications menu. If I click on the .desktop file through nautilus, it says there is a problem and it cannot run the application. I'm not sure how to open a .desktop file from the terminal, so I can't look for more specific error messages.
I tried creating a script and pointing the desktop file to that instead, and I tried using GTK_MODULES= && gimp, but both give the same problem. As soon as I click save, it becomes unusable, only fixable by reinstalling gimp.
Do you think it's possible to do what I'm wanting to do?
Last edited by themusicalduck (2011-12-23 22:33:06)

GERGE wrote:Try to use alacarte. It works well for this.
That worked perfectly! Thanks very much.

Can't edit pdf form with acrobat all of a sudden!

I used to be able to create and edit our pdf forms we created with Acrobat. After switching to Creative Cloud and updating/installing all the apps we want to use, it now says:
"This form cannot be edited in Acrobat. Pleae use Adobe LiveCycle Designer to edit this form."
I don't see this app available?

This forums thread may help :-
http://forums.adobe.com/message/4783851
[moving the discussion to Acrobat Forums :Forms]

LR 3.2. Can't edit in PS with LR adjustments?

Similar Messages

Maybe you are looking for