LR 3.2-Images Imported Not Always In Order. Why??

This problem did not exist in LR 2.x.
With v3.2, images imported from SD card do not always import to LR based upon the order in which they were captured by the camera.
Using Windows Vista Home Premium.
Am I missing a default setting that needs to be changed?
Thanks for any help/info.........

Question answered. I wish I had dug around just a bit before whining:
In the full up import dialogue, the bottom of that screen has various sort options.
One of them is capture time. That will take care of my concern.
However, it appears that the selected capture time option must be reselected prior to each import.
Too bad that it is not in the software memory, as is now the option for "Copy As DNG". In LR 3.0, that was a bug, as it too was not in memory and had to be selected prior to each import.

Similar Messages

Disk Copy 6.3.3 reports problem with image - but not always

I have run across a problem with Disk Copy 6.3.3 that looks to me like a bug of some sort, but I can't be sure and want to see if anyone has any additional information. I am running Mac OS 8.1 on a Quadra 950, just in case it is important.
I have saved almost all my old installation floppies as Disk Copy images and now use these images if I have to reinstall software due to failures of several original media. I recently had reason to reinstall software that was stored on multiple disk images and I could never mount them all without receiving the following error after some of the disks were mounted:
+There is a problem with the disk {whatever the disk name is}.+
+Some information may have been lost.+
+Check any recently-used files for data loss, and use a+
+disk-repair program on the disk.+
After further investigation, I found that this problem not only affected this set of installation disks, but others as well. To make a long story short, I have found that I have at least two Disk Copy images that are causing this behavior. I have dozens of other images and they all mount successfully UNTIL I mount one of these two image files (there may be others, but I know of at least two at this time). After I mount either of these two images, many (I estimate more than 50%) of the other images seem to mount, but the message above appears after the mount completes. Some of the images seem to mount without errors, even after one of the two problem images are mounted. Unmounting the problem image does remedy the problem. The only way to mount images without errors again is to reboot.
Has anyone seen this before and have any additional information? In particular I would like to know if I can trust the images that are giving me problems - in particular the two that are causing this situation, but also the ones that indicate data corruption? I'd also like to know if there is a real fix for this problem? If the data in these images is not corrupt, I could make floppies from them every time I want to reinstall software, but I'm not sure the data is good and I really don't want to have to try to find floppies just for an occasional reinstall. Thanks for any help!

Well, I've got some additional information. I have a Macintosh LC running 7.5.5 that also has Disk Copy 6.3.3. I didn't copy the image files to the LC, but instead mounted them over the network, in a half-hearted attempt to rule out issues with disk I/O errors causing this problem. All images mounted without any errors. This pretty much eliminates any problems with the disk image itself being corrupt or with it being a problem with the content of the disk image causing a problem with Disk Copy 6.3.3.
I had been having some signs that my current system disk on the Quadra may be ready to fail, so I added another disk, formatted it, and installed a fresh install of 8.1 on it. Before doing much of anything to customize the installation (no software other than on the 8.1 install disk, almost no settings other than the default, etc...), I tested the images again and they failed again. This eliminates any problems with third party software that I had installed previously. I even booted with extensions disabled and still got the error message.
When I look in the Disk Copy log file, there are NO signs that any errors have ever occurred. This leads me to beleive that the message I'm seeing is not the fault of Disk Copy, but either the System or the Finder. My best guess right now is that once the image file is mounted by Disk Copy, that it is asking the System/Finder to do something that is either failing and produces the error message, or is returning an unexpected return code and causing Disk Copy to produce this message (which for some reason isn't being logged). If nobody has any clues from the additional information, I'll try reinstalling again with only a minimal install and see if I can figure something out. Thanks for any help that anyone might have!

10 Bit in Photoshop CS5 not always visible. Why?

Hi,
im using an Eizo CG243W with an ATI FirePro 4800 and Win7 64 + the PS CS5 Trial (runs out soon, im thinking about buying PS CS5 if this Problem gets solved anyway).
Ok, i activated 10Bit in the newest ATI Driver and in Photoshop. It works, but not all the time. When i open an Image i can see its 10 Bit but
when i move the Picture or Zoom in/out it gets down to 8 bit and stays there until i click somewhere else, open a menu or do something.
So the 10 Bit is not always active. When i paint with a brush on the image when 10 Bit is active, it gets down to 8 bit and sometimes when
i press and hold space, it gets back to 10 Bit.
Any clues?

I have the same Problem.
When i open the ATI Testfile RAMP.PSD i see that it is in 10Bit but when i zoom in or even move the mouse over the image, the 8bit Banding gets visible. Very strange. My system uses newest ATI Drivers.
Tried everything from resetting the Drivers (FirePro 4800) and playing around in the Photoshop OpenGL Settings.
The Windows 7 Aero design gets put off by the ATI Driver itself when you enable the 10 Bit in the Driver-menu.
Did anyone else notice this? 10 Bit works for my Eizo+FirePro but that strange behavior when you move the mouse around or zoom or brush isnt normal at all.
Btw. If i can test something i have the time to test anything about about 10bit in Photoshop CS5

IDVD image files not always burning using Disk Utility

I am using iDVD 06 to create media, from FCE .mov, and have been using the "Create DVD image file" option so that I can make quick copies for clients as needed. Recently a LOT of my gens, using Disk Utility, have been rejected as 'not verifiable' hence wasting a good disk. Some of them do get created successfully. I am currently using WINDATA DVD+R disks. Not sure if this is an iDVD problem or Disk Utility problem frankly. Have reverted back to creating multiple copies in iDVD after the initial 'slow' burn of the original. Thanks

I am currently using WINDATA DVD+R disks. Not sure if this is an iDVD problem or Disk Utility problem frankly
There is a third choice that I think is the most likely problem source - WINDATA DVD+R disks themselves.
I'm 'not big' on + media for single layer disks anyway, but if you are supplying clients with discs you burned, you really ought to use good quality media like Verbatim or Maxell.
BTW, I always recommend reducing the burn speed in Disk Utility to 4x or lower (I use 2x)
F Shippey

Images in loupe view of library module of LR4 are not always focusing. Why?

Have just upgraded my whole system to get LR4 to work at an acceptable speed- including 16gb ram, 1TB hard disc. When importing RAW images are copying them to DNG and doing 1:1 prewiew at that time. After finishing working in the develop module when I try to look at the images in loupe view in library module many of the images remain unfocused- If i export as jpeg to hard disc they are fine.I need to be able to view ,rate and select images in LR

Sound like this bug Mark? http://feedback.photoshop.com/photoshop_family/topics/lightroom_4_3_bug_pixelized_image_pr eview

Doubles Images, But Not Always

Recently, I started using a standalone time base corrector (TBC) called the AVT-8710, between my consumer VCR and Canopus ADVC110, in order to try recapturing certain VHS tapes with problematic sections that previously led to skipped frames in the captures.
(The skipped frames have something to do with the videotapes and/or the Canopus ADVC110, not Final Cut Express or my computer system and peripherals.)
Recapturing the problematic videotapes using the TBC has resulted in captures that playback okay in the Final Cut Express Viewer. The Quicktime files (in the capture scratch folders) also playback okay with Quicktime Player. (The TBC got rid of the skipped frames.) However, when sending the video out from Final Cut Express via Firewire to the Canopus ADVC110 (set to Digital In), and the Canopus analog out to my 720p HDTV, I see lots of double images in the problematic sections where the skipped frames had occurred in the earlier captures.
(This Video Out set up otherwise works okay; the problem is only with the recent captures done with the TBC.)
When doing the same captures into iMovie 6.0.4, with everything else the same, I'll see the double images during playback within its interface, and sending video out only sends audio. The DV files within Package Contents will play okay with Quicktime Player.
What is all this telling me that I don't understand? Obviously, I'm not going to trust that these captures are okay.

It's taken me this long, but I think I've answered my own question, at least partly.
When I explained the captures "playback okay in the Final Cut Express Viewer" and "the Quicktime files (in the capture scratch folders) also playback okay with Quicktime Player" at the top of this thread, I was not aware that Final Cut displays only one field during playback, and Quicktime Player was defaulting to showing only one field during playback. Apparently, that is the reason I was not seeing the interlacing problem (the "double images") during playback of the capture files with those methods of presentation.
I also explained, when sending video out from Final Cut Express to a camcorder or digital-to-analog to an HDTV, I'd see the "double images" during playback. I'm thinking now, when I wrote, "it seems it may have something to do with the interlace video being converted for progressive presentation", I had things reversed in my mind. When outputting to my camcorder or monitoring on the HDTV, then, in fact, I was seeing both fields, which revealed the interlacing artifact.
As for what went wrong during the digitizing process in the first place, I wasn't really expecting to get that question answered on this thread. Nevertheless, comments are welcome.
Reading the "BEST QUALITY QUICKTIME?" thread started by prof d hall on the "Getting started with video production on a Mac" forum was helpful. I tried out the discussed "High Quality" setting, accessible by going into Movie Properties, clicking on video track, then visual settings. And lo and behold, then the "double images" are revealed during playback, apparently because "High Quality" means playing both fields. (I have Quicktime Pro, and assume Quicktime Pro is required to perform this function.)
P.S. I understand, if I save a Quicktime movie file at the "High Quality" setting, it is only changing metadata, not changing the quality. I also understand, if you do this with a raw DV stream file (.dv), Quicktime Player needs to perform "Save as..." and create a new ".mov" file, because raw DV stream does not support the metadata. However, I feel that prof d hall's question about why the file size doubles when going from .dv to .mov was not answered on that thread (now archived). It's easy to see why he may have confused this function with the actual data being saved at a higher quality.

I have just dowloaded iTunes new version 10.4 (on Windows), and I can't paste artwork from Word anymore, only directly from the net (where the size or the quality are not always optimal). Any way around this?

I have just dowloaded iTunes new version 10.4 (on Windows), and I can't paste any artwork from Word anymore, only directly from the net (where the size or the quality of the images is not always optimal). Major problem given that I'm in the process of re-ripping some 40K+ songs in Lossless format... Any way around this?

Peter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P.

LR4.2 and "Do not import selected duplicates" does not always work.

LR4.2 and "Do not import selected duplicates" does not always work. Running a Mac, 10.6.8, I am cleaning up hard drives, organizing old files. There are times lightroom 4.2 (and before) does not recognize already imported raws and does not gray them out. These are backed up cards and folders of of raw images. Why is the "do not import selected duplicates" check box not working???!!!

There's a known (and old) bug when duplicate identification fails on photos
that have been imported from another catalog.
Sent from phone.

Computer will not always import photos from kodak easy share?

My macbook pro does not always import photos from the kodak easysgare camera, any suggestions?

I found a solution in a couple of other threads. The main problem is when you start iPhoto from the dock, the unix process is owned by root, and not as it should be, by you. If you start iPhoto from the Terminal by entering /Applications/iPhoto.app/Contents/MacOS/iPhoto, iPhoto is able to import the images.
I don't believe that starting the applications from Terminal is a good solution, so I looked for another - reinstalling Leopard seems to be the best option, and it actually works. I can now import images to iPhoto again.

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

Star Rating bar does not appear with images imported from file

Using Elements 11, cannot get the Star Rating bar to appear under images imported from file, although the intro to the program shows this as happening automatically.
Hope this goes through, as I have also created an account, but the question does not seem to be get a post.
Help!

Have you enabled Organizer to show details? You can enable show details by checking View > Detail is not already checked

My title and description info on my iPhoto images do not import to Aperture with the image

My title and description info on my iPhoto images do not import to Aperture 3.2 with the image. Is this just the default setting and if so, is there a way to import all the info?

Hello there, FrancesCech.
The following iPhone Troubleshooting Assistant should help with what to do with your situation:
Apple - Support - iPhone - Restore Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/restore/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Images imported from iPhoto to iDvd are not as sharp as originals. Any solution?

Trying iDVD for the first time. Imported images from iPhoto. However on the DVD, the images are not as sharp as the original files which are very sharp and well-focused. Any solutions or is this kind of degradation just to be expected?
Thank you!

Hi
There are several layers to this.
a. There are no HD-DVD - DVD is as standard only Standard Definition as on old CRT-TVs and can never be anything btter as iPhoto showes on Your Mac screen (5 to 10 times higher resolution)
b. One can get a result less than iDVD SD quality and down to really bad by
• Using iMovie'08 or 09 or 11 - as they discard every second line in the picture = 50% loss
• Using iMovie HD6 and NO Ken Burns effect AND "Share to iDVD" as this also results in disaster (heavely pixelated Bad bad pictures) - (as iMovie will render badly)
c. I build my SlideShow in
• iMovie HD6 - and no Ken Burns effect - BUT I close iMovie and import iMovie movie project (SlideShow) from within iDVD and now iDVD will render and so much better.
• FinalCut also delivers maximal quality over to iDVD
(from FCE/P - Export out as QuickTime .mov - NO QuickTime conversion (Important))
• iMovie'08 to 11 - I Share to Media Browser and as Large (not HD or other)
iMovie HD6/FinalCut + iDVD will give as high quality possibly to the resulting DVD.
I use
• Verbatim DVD-R
• set down burn speed to x4 (Plays better on many DVD-Players)
• Pro Quality encoding - I got the time and like the result
Yours Bengt W

LR 3.2-Images Imported Not Always In Order. Why??

Similar Messages

Maybe you are looking for