LR 3.2 new smart collection not getting correct capture date?

Just created a new smart collection after updating to LR 3.2.
It's showing photos taken in 2008 and 2009, well beyond the last two months. Checked the capture date displayed in LR. The older photos shown have been edited within the last two months.
Bug or am I doing something wrong?
Thanks.

There was bug with "months" since Lightroom 2. Looks like it has never been fixed.
Try setting "60 days" instead of "2 months".

Similar Messages

Smart collections not reading correct number of images inside

I have an issue with smart collections for the first time. I have just set up a new workflow with 4 stages and the number counter next to the collection is counting wrong despite the images being represented in the collection. For example if I click on the smart colection I can see 10 images inside but the counter reads 3. Does anybody have this experience?
I have optimised my cataloge, however I do have some 20,000 images inside... will this reduce the ability of LR to keep up to running speed with such smart collection operations, giving incorrect readings.
What are best practices for image numbers and the arguement for running multiple cats. I've just tried in a fresh catalogue and the results were perfect. Is this an inherent limitation of Lightroom? I was under the impression that I could manage my whole archive and current projects under one roof, as it were.
Thanks,
Graeme

I suppose it would be worth optimising the catalog, if you haven't already done so.
Another idea, may be to make a fresh catalog and "import from another catalog" your current one, into that. This transfers pictures and keywords, collections, smart collections etc. But if there is something "structural" or "infrastructural" wrong with your live catalog, I'd expect that to get left behind by this process - since everyting should AFAIK get re-indexed after being brought in.
Then you'd go forward with the new catalog, if successful. Doing this makes no change to your present catalog so can do no harm to try - the various pictures' source files are simply shared across both catalogs - single file referenced by both, IOW.
One thing in your post (which I did not fully understand) suggested to me that your workflow relies at some point, on external metadata being written. If your workflow and smart collections criteria rely on the LR tracking of the status of external metadata, such as "is up to date", I believe this specific aspect has been found quite buggy and unreliable by many people: the metadata status badges etc, being sometimes rather approximate in their correspondence to reality . So if some other criterion could be found on which to base your workflow, that would probably go more smoothly .
However, if you do have more than one catalog pointing to just one set of photo source files, that aspect of writing metadata out, will of course be a little problematic - since the latest catalog to have written to the file will "overwrite", and the other catalog(s) will regard that same image as having been externally modified meanwhile.
regards, RP

Smart Collection not letting me click Save

Hello,
I have no smart collections or regular collections created.
I am trying to create a smart collection containing all the photographs with the keyword Goofy in them.
1. I click "Create new smart collection"
2. Look in: 'my photos' folder
3. Criteria; select Keywords - contains - and type in Goofy
4. In results, Match if any criteria are met and both check boxes stay selected.
5. Click Save.
When I click save, nothing happens, the window stays open and it doesnt seem like it acknowledge my click.
Suggestions?

That is odd.
I don't know what influence startup scripts have but you might check and see if you have them checked in preferences/startup scripts.
Is this on an internal dirve? If external may have permission problems. Just as a test close Bridge, right click on Bridge icon and choose "run as administrator".
If that does not work I am out of bullets. Might want to try reset preferences. Hold down Ctrl key and start Bridge. Should get a reset window with 3 options.

Cannot any longer save new smart collections

Hi, after reinstalling Photoshop CS6 I cannot any longer save smart collections in Bridge. Always I want to create a smart collection by entering criteria, but when I click on SAVE, it is not saved. After some time of waiting, I always have to cancel, to close the pop-up window that should allow me to save the new smart collection. In my old installation (before I had to install a new hard disk), setting up and saving smart collections never was a problem.
ALL updates of CS6 have been installed. And I am under WINDOWS 7. Version of CS6 is: 13.01 x64
Before, I used a regular hard disk for the system, now I have a SSD, plus several hard disks for data storage.
Can anybody help me with advice what the problem is?
That whould be great. Thanx,
Jochen

There is also a Bridge Forum you can search ans ask in Bridge General Discussion

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

I am new and can not get my file to inport from ny doc to adobe

I am new and can not get my file to inport from ny doc to adobe

What is your Adobe? Please give full name and version.
What do you try?
What happens? Please give any error messages in full.

I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

Do you have the email & password of the old Apple ID?

Not getting correct Tax calculation - due to "Ship to party region code"

When we are making Sales order   using (UTXJ cond.)
Origin Country----
IN
Delivering Plant Region----
24
Ship To Party region----
24   (maintained in customer 1 address)
Tax Classification Customer------J
Tax Classification Material----
1
We are getting correct   Tax calculation for tax code AD (4% + 1%)
But when we are using
Origin Country----
IN
Delivering Plant Region     -
24
Ship To Party region----
06     (maintained for customer 2 address)
Tax Classification Customer------ J
Tax Classification Material----
1
We are not getting correct   Tax calculation for same tax code AD (4 %( JIN2) + 1 %( ZIN2)). Instead we are getting only 1%..

difference in tax codes used for sales purpose is just the fact that Ship to party region is different.
Ship To Party region----
24   (up)
Ship To Party region----
06    (Bihar)
For 06 it is not calculating correct values

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". Please help!!!

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!

Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app.

RFC does not get the updated data

Hi Experts,
I am not getting the updated data via RFCs.
The scenario is like this.
Step 1: I open the Application running on System "B".
Step 2: I add a record in second Application which is on system "A".
Now I want the same data to be reflected on Application running on System "B" on some event.
I observed the data is never reflected in Application running on System "B", but when I refresh the page of this Application, I get the updatred data. Do you have any clues why this is happening.
Best Regards,
Arti.

Hi,
Can you be bit more clear about the requirement. It is logical that without refresh updated data wont be shown.
Thanks,
Vinod.

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

I just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

i just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

Copy everything from your backup copy of your old computer to your new one.
Then sync.

Apple Configurator: "Policy does not have correct profile data."

I keep getting the message "Policy does not have correct profile data." when I'm trying to prepare new devices in Apple Configurator 1.2. Existing devices work fine, and I was able to prepare a few new devices before getting this error. Any advice besides "wipe and restart" AGAIN?

defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
should eliminate the problem, though it will partially reset the default settings in the Prepare pane. Did you delete a configuration profile that had been checked in the Prepare settings?

Unable to get correct ship Date-MRP ATP API Call

Hi,
We are facing issue in getting correct ship date by calling MSC_ATP_GLOBAL.Extend_ATP from OM for ATO Model. However, correct ship date returned by availibility check from OM.
Currently, we are checking only capacity constrain by enabling CTP for critical resource for TOP Model(Resoure Only). The API is not checking the capacity constrain and returns ship date as sys date.
Can someone provide your expert advise, why ATP ignores the capacity contrain (CTP) when called from API.
PS: We are in distributed environment, Source on 11.5.10 and Destination on R12
Regards,
ML

Hi Abhishek,
Yes, I am able to see in the ATP details pegging tree (resource constrain- date getting pushed). In the API, I have set it as N.
I dont see an option to upload the dump in the forum, can you please let me know what specific details to be checked in both files. I will check and let you know.
Regards,
ML

Some photos are not sorted correctly by date

I just imported some photos from my friends camera who were on the same trip. However, I noticed that a couple (not all) of his photos are not sorted correctly by date in the Event. A photo from day 3 somehow comes before the photos from day 2. I checked the extended information and the dates on the photo are correct. Has anyone had this problem and know of a solution? Thanks.

It might be of some help to delete the photo cache. Please see this link - http://support.apple.com/kb/TS1314

LR 3.2 new smart collection not getting correct capture date?

Similar Messages

Maybe you are looking for