LR 3.2 Renaming files on import error

Hi all, an error on importing and renaming files seems to have cropped up. In the last week or so I have imported some files from a cf card, only to have LR 3.2 "say" that "LR has imported certain files but the following images cannot be renamed" and the preview is greyed out. Double clicking on the "greyed out" image doesnt help either. The images are in the catalogue and first deleting them via LR and then reimporting them seems to work.
Any thoughts?
Kind regards

Thanks for responding. They show in - C:\Users\Roy Shopland\Pictures\2010\2010-08-30. They actually appear under 2010 in the left hand column (at the beginiging of 2010 rather than under the date in 2010. Can you explain why this is and how can I correct it? Many thanks

Similar Messages

How can I rename files when importing?

Is there a way to rename files when importing them? Every method I've tried retains the original file name the camera assigns (e.g. DSC_0001). I'd like the ability to rename the files automatically either with a date or event name with sequential numbering following.
Thanks!

First you will have to upload from the camera to a folder on the Desktop where you can batch rename them before importing into iPhoto. That's a safer workflow IMO because you can make sure the photos are safely on the hard drive before starting any other operation.
OT

Any way to rename files when importing from camera with iPhoto?

I have a naming scheme that I've used when importing photos from my camera (e.g. 2008-09-12-Event ). I can't create a custom folder (in Pictures but outside iPhoto Library) or rename things when importing with iPhoto - is that right? I can't find any advanced options to import ...
If I want this (and don't want to use Adobe Bridge CS3), do I have to get Aperture?
Thanks -
Alexa
p.s. I haven't really figured out WHERE my photos go with iPhoto? I've been editing in Photoshop Elements 6 but then have to "Save As" to replace the file - saving it doesn't do it (I think that sends it to the iPhoto library somewhere?) Eek...

Alexa:
You might consider this workflow:
1 - using either Image Capture or a card reader upload the images to a folder on the desktop.
2 - name the folder with a brief description of the shoot. I use a short date and description: 08/01/08-Dinner at Toad Hall
3 - use a file renaming application like Resize! to batch rename the files to your specification. I use the international date (for the capture date) and a brief description: 2008-08-01-Dinner at TH-001.jpg.
This allows for good chronological searching and sorting as well as text searching on the description. It also avoids duplicate file name issues in the future. Granted a few extra steps up front but saves me a lot of time later on.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

[10G2 on XP PRO] Rename file script returns error

Hi,
I mistakenly created a "Users03" datafile without the .dbf extension.
Now I would like to add it in order to use wildcards in scripts.
Here is the "Rename" script:
>
alter tablespace users rename datafile
'l:\oracle\product\10.2.0\oradata\oracompta\users01.dbf',
'l:\oracle\product\10.2.0\oradata\oracompta\users02.dbf',
'l:\oracle\product\10.2.0\oradata\oracompta\users03'
to
'l:\oracle\product\10.2.0\oradata\oracompta\users01.dbf',
'l:\oracle\product\10.2.0\oradata\oracompta\users02.dbf',
'l:\oracle\product\10.2.0\oradata\oracompta\users03.dbf'
Here are the output from the "dba_datafiles" view and error message for the rename:
>
SQL> @c:\jb\data\sources\oracle\dba\datafiles
...[RETURN].......
FILE_NAME TABLESPACE_NAME AUTO MAXBYTES INCREMENT_BY
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\EXAMPLE01.DBF EXAMPLE YES 34359721984 80
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\SYSAUX01.DBF SYSAUX YES 34359721984 1280
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\SYSTEM01.DBF SYSTEM YES 34359721984 1280
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\UNDOTBS01.DBF UNDOTBS1 YES 34359721984 640
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\UNDOTBS02.DBF UNDOTBS2 YES 629145600 12800
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\USERS01.DBF USERS
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\USERS02.DBF USERS
L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\USERS03 USERS
8 ligne(s) sélectionnée(s).
SQL> @c:\jb\data\sources\oracle\dba\renamefile
alter tablespace users rename datafile
ERREUR à la ligne 1 :
ORA-01525: échec du changement de noms de fichier de données
ORA-01523: impossible de renommer le fichier de données en 'l:\oracle\product\10.2.0\oradata\oracomp
Maybe there is some limit to the input line length in SQL*Plus?
I can't find how to rename a datafile from the OEM console.
Looks like I'll have to create a "usersbis" tablespace and copy every object into it, then drop users tablespace.
Or I'll find an inocuous DBA command to test the correct syntax for referencing datafiles names under Windows.
Many thanks for your help :-)

Hi,
I tried your commands after a cold backup.
Here is the SQL*PLUS output:
******************** QUOTE ********************************************
SQL> startup mount
Instance ORACLE lancée.
...[RETURN].......
Total System Global Area 272629760 bytes
Fixed Size 1248504 bytes
Variable Size 100664072 bytes
Database Buffers 167772160 bytes
Redo Buffers 2945024 bytes
Base de données montée.
SQL> alter tablespace users rename datafile
2 'l:\oracle\product\10.2.0\oradata\users03'
3 to
4 'l:\oracle\product\10.2.0\oradata\users03.dbf';
alter tablespace users rename datafile
ERREUR à la ligne 1 :
ORA-01109: base de données non ouverte
SQL> alter database open;
alter database open
ERREUR à la ligne 1 :
ORA-01157: impossible d'identifier ou de verrouiller le fichier de données 7 - voir le fichier de tr
ORA-01110: fichier de données 7 : 'L:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACOMPTA\USERS03'
SQL> alter tablespace users rename datafile
2 'l:\oracle\product\10.2.0\oradata\users03'
3 to
4 'l:\oracle\product\10.2.0\oradata\users03.dbf';
alter tablespace users rename datafile
ERREUR à la ligne 1 :
ORA-01109: base de données non ouverte
********************** END QUOTE ********************************************
I must have done something wrong.
I'll try renaming the file from DOS and open the database.
Many thanks for your reply.

Error message: "the following files were imported but could not be renamed"

Trying to import photos and keep getting error "the following files were imported but could not be renamed." Any help would be appreciated...using Lightroom 3 still ( I know I know) and importing into lightroom with a backup copy to computer harddrive.
Message title was edited by: Brett N

Peter I am also experiencing the same error message. Here is my situation:
I am using Lightroom 4.
I have duplicated images across multiple harddrives.
I am trying to import these using 2 seperate 2 terrabyte hard drives ( 1 for lightrooom the other as my image backup drive).
I am using keywords and embedding the keyword into the new backup file name. Hopefully provide some organization.
I am using the MOVE option in my import process.
Have he images that were not renamed moved to the new backup drive? Are they they under the original file name?
I want to end up with a common lightroom catalog and single backup file structure as my photo repository.
What am I doing to trigger the above message and what suggestions might you have with regards to my lightroom organization approach?
Any insight and recommendations to my situation would be greatly appreciated.. Thanks, Jay

Error in renaming file

This is the code to create a file and rename it..
import java.io.*;
class renamefile2
public static void main(String[] args) throws IOException
File file = new File("saranya");
boolean success = file.createNewFile();
if (success)
{System.out.println("file created");}
else
{System.out.println("file exists");}
boolean done = file.renameTo("naanee") ;
if (done)
{System.out.println("renamed successfully") ; }
else
{System.out.println("not renamed successfully") ; }
Im getting the error:::
C:\mywork>javac renamefile2.java
renamefile2.java:12: renameTo(java.io.File) in java.io.File cannot be applied to
(java.lang.String)
boolean done = file.renameTo("naanee") ;
^
Please help me solve !!

You can get the API documentation at :
http://www.google.com/search?l=en&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=Calendar+API+in+java&spell=1
http://java.sun.com/j2se/1.4.2/docs/api/java/util/Calendar.html
You have to do something like :
Calendar c = Calendar.getInstance();
int day = c.get(Calendar.DAY);
int month = c.get(Calendar.MONTH);
int year = c.get(Calendar.YEAR);
String date = day+" / "month" / "+year;

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

"file not found" error in VI Logger when running an imported VI Logger task

I'm having trouble getting all of my imported tasks to run in VI Logger.
I'm using VI Logger 2.0, with an SCXI-1100. The data acquisition tasks I import run fine. One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
"Engine Error!
Error Code = 7
LabView: File not found. The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
If I create a new VI Logger task, the new task works OK. And my 1st VI Logger task to be imported works OK. So I know my setup mostly works. But our company has never been able to figure out importing tasks very well, so I'm looking for help.
Question 1: What file is LabView looking for? I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
Question 2: Where else might I look for the difference between the 2 VI Logger tasks? Neither task uses any weird characters in the name, both have analog input channels and calculated channels. And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task. I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
Thanks for the help in advance,
Jake

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

How do I convert an excel (2008) document to Numbers? When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid"

How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.

That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

Custom TCode for Excel File Upload/Import - WebGUI Error

We get an ABAP runtime error when uploading an excel file with a custom tcode using WebGUI. It works ok with WinGUI. Any ideas what could be causing that error?
Runtime Errors         RAISE_EXCEPTION
Date and Time          01/05/2011 17:27:16
Short text
     Exception condition "JAVABEANNOTSUPPORTED" raised.
What happened?
     The current ABAP/4 program encountered an unexpected
     situation.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A RAISE statement in the program "C_OI_CONTAINER_CONTROL_CREATORCP" raised the
      exception
     condition "JAVABEANNOTSUPPORTED".
     Since the exception was not intercepted by a superior
     program, processing was terminated.

You can use the below code. One more thing while running make sure there is no unsaved excel sheet open in your system.
FORM sub_create_container .
Create Instance control for container
CALL METHOD c_oi_container_control_creator=>get_container_control
    IMPORTING
      control = iref_control
      error   = iref_error.
IF iref_error->has_failed = c_check.
    CALL METHOD iref_error->raise_message
      EXPORTING
        type = 'E'.
ENDIF.
Create generic container linked to container in screen 100
CREATE OBJECT oref_container
    EXPORTING
      container_name              = 'CONT'
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
    MESSAGE e000 WITH 'Error while creating container'(012).
ENDIF.
Establish connection to GUI Control
CALL METHOD iref_control->init_control
    EXPORTING
      inplace_enabled      = c_check
      r3_application_name = 'EXCEL CONTAINER'
      parent               = oref_container
    IMPORTING
      error                = iref_error
    EXCEPTIONS
      javabeannotsupported = 1
      OTHERS               = 2.
IF iref_error->has_failed = c_check.
    CALL METHOD iref_error->raise_message
      EXPORTING
        type = 'E'.
ENDIF.
Create Document Proxy
CALL METHOD iref_control->get_document_proxy
    EXPORTING
      document_type = soi_doctype_excel_sheet
    IMPORTING
      document_proxy = iref_document
      error          = iref_error.
IF iref_error->has_failed = c_check.
    CALL METHOD iref_error->raise_message
      EXPORTING
        type = 'E'.
ENDIF.
ENDFORM.                    " SUB_CREATE_CONTAINER
FORM sub_create_document USING    p_sheet TYPE i.
DATA: l_title   TYPE char40,
          l_char    TYPE char2,
          l_time    TYPE i,
          l_sheet   TYPE char12.
Calculate the number of sheets to be created
l_time = p_sheet - 1.
CONCATENATE 'Assembly Table'(015) v_char INTO l_title
SEPARATED BY space.
Create document
CALL METHOD iref_document->create_document                 " Open use Open_document method
    EXPORTING
      open_inplace   = c_check
      document_title = l_title
      no_flush       = c_check
    IMPORTING
      error          = iref_error.
Open Spreadsheet interface
CALL METHOD iref_document->get_spreadsheet_interface
    EXPORTING
      no_flush        = c_check
    IMPORTING
      sheet_interface = iref_spreadsheet
      error           = iref_error.
Get number of sheets
CALL METHOD iref_spreadsheet->get_sheets
    EXPORTING
      no_flush = c_check
    IMPORTING
      sheets   = i_sheets
      error    = iref_error.
Reaname he sheet
READ TABLE i_sheets INTO wa_sheets INDEX 1.
l_char = p_sheet.
CONCATENATE 'Sheet' l_char INTO l_sheet.
CALL METHOD iref_spreadsheet->set_sheet_name
    EXPORTING
      newname = l_sheet
      oldname = wa_sheets-sheet_name
      no_flush = c_check
    IMPORTING
      error    = iref_error.
REFRESH i_sheets.
CLEAR: l_char,
         l_sheet.
Add sheets
DO l_time TIMES.
    l_char = sy-index.
    l_char = p_sheet - l_char.
    CONCATENATE 'Sheet' l_char INTO l_sheet.
    CALL METHOD iref_spreadsheet->add_sheet
      EXPORTING
        name     = l_sheet
        no_flush = c_check
      IMPORTING
        error    = iref_error.
ENDDO.
Get number of sheets
CALL METHOD iref_spreadsheet->get_sheets
    EXPORTING
      no_flush = c_check
    IMPORTING
      sheets   = i_sheets
      error    = iref_error.
SORT i_sheets BY sheet_name DESCENDING.
ENDFORM.                    " SUB_CREATE_DOCUMENT
FORM sub_save_document .
DATA: l_changed     TYPE int4.
Save the document
CALL METHOD iref_document->save_as
    EXPORTING
      file_name = p_file
      no_flush = c_check
    IMPORTING
      error     = iref_error.
Close the document
CALL METHOD iref_document->close_document
    EXPORTING
      do_save     = c_check
      no_flush    = ''
    IMPORTING
      has_changed = l_changed
      error       = iref_error.
ENDFORM.                    " SUB_SAVE_DOCUMENT
Thanks
Subhankar

File Import Error - Adobe Media Encoder, help!

I'm at a complete loss. AME worked very well for me for a long time and booting it up yesterday gave me a paralyzing error.
Upon trying to import an MOV, MP4, and later a WMV, I received the following error:
File Import Error
The file C:\Users\tj\Desktop\New folder\SH_GS_PeekPlay_DEMO_720.mp4 could not be imported. Could not open source file. Please check that file exists with correct permissions.
I've tried everything I can think of:
1. Moved the file off the server and onto my desktop.
2. Double checked file permissions (all of which I have)
3. Uninstalled AE and Premiere to try to get rid of Media Encoder.
4. Searched for a way to uninstall AME so I could put a fresh install (can't find how to do this)
5. Manually updated AME
6. Reboot (multiple times between these steps)
7. Contact customer support - no help thus far.
I'm running Windows 7 64bit with Adobe CC and AME 7.0.1.58

Tried that as well.
To rule everything out, I had the files placed:
1. On company internal server
2. External Harddrive connected through Firewire
3. Internal Hard Drive (with OS)
4. Internal secondary Hard Drive (data only)
5. On Desktop (technically 1st internal drive)
I have since fixed this by uninstalling every single Adobe application (including Flash and Air) and redownloading and installing each.

Import error with MPEG-2 files: Brorsoft Video Converter to Apple Prores.

Hi,
The Brorsoft Video Converter software gives me an 'import error' message when I attempt to import files from a folder on my desktop. That folder contains many mpg files (MPEG-2 Video, AC3). Those files in the folder on my desktop came from a Sony video camera.
I need to convert those mpg files to Apple Prores 422 HQ so I can then edit them in Apple Final Cut Pro X.
But when I go to import those mpg files into the Brorsoft Video Converter software, it comes up with a message saying: 'import error', indicating that the Brorsoft Video Converter software does not understand the type of file.
I am on Mac OS X Version 10.6.8.
I've emailed Brorsoft support but I don't think English is their first language – they've emailed back to me asking for clarification of the problem. And I need the problem fixed as I have to edit this video for someone that has many waiting customers.
Could something have changed in the files when I copied them from the video camera to the desktop?
Thanks in advance.
Cheers,
Paul

Hi Tom,
Thanks for your prompt reply. I was using a friend's video camera – I've just texted him for the exact model of Sony video camera. I didn't yet have the Brorsoft Video Converter software when I had to give the video camera back to my friend. So, I copied the files off the video camera to my desktop.
It records onto an internal hard drive. And yes you're right, I don't need to go HQ. I also tried plain Apple Pro Res. That didn't work either. It comes up with 'Import error' message, so it seems like it just doesn't understand the file type.
When I go 'Get Info' on one of the files off the camera, it tells me it is an 'MPEG-2 video, AC3' file.
I'll try and get MPEG Streamclip like you suggested and see if that works.
Thanks again.
Cheers,
Paul

Import Error Opening AppleWorks 6.2.9 .cwk files in Pages 3.0.2

Once upon a time I could open all my Appleworks 6 files in Pages. Now, trying to open these files in Pages produces an "Import Error - AppleWorks document 'name xxx.cwk' is not a word processing document."
The file(s) were saved, re-saved and re-saved again as an AppleWorks 6.2.9 .cwk files. Pages 3.0.2 will no longer open any of my Appleworks 6 .cwk files. No drag-and-drop. No FILE/OPEN. Nothing ... same "Import Error."
Anyone having the same problems opening AppleWorks 6 .cwk files? Any solutions? Any advice? Thank you.
Message was edited by: Monte Chapin

There was someone else here awhile back that also had problems opening AppleWorks word processing files with Pages. I had no problem opening the files with either AppleWorks or Pages, so we never did figure out what was the cause. I'd be glad to take a look at one or two of these files. Click my name in blue next to this post. My public e-mail address is in the biography section. Just replace (AT) with @.

Import Error The document is encrypted and can't be opened.i am able to open the file on my windows computer at work. there is no password needed.

I am unable to open an xls file. I get the message: Import Error The document is encrypted and can’t be opened.
I am able to open the file on my windows computer at work. there is no password needed.

See note 2 in Troubleshooting issues with iTunes for Windows updates for starters...
tt2

LR 3.2 Renaming files on import error

Similar Messages

Maybe you are looking for