LR 3.3 not finding catalogs

I have used LR3.3 for many months, successfully making adjustments and saving files in subfolders as jpegs. After processing photos today, I shut down the LR3.3 and worked in another program unrelated to LR3.3. When I came back to LR3.3 to review the work I did, I received a message that it could not find the catalogs, any catalogs. The catalogs are in the same place on my hard drive; I checked. I even imported a catalog back into LR3.3, but it refuses to recognize any linkage that it previously made. Further, reimporting brought not only the raw data files, but the subfolders with the jpegs, which I did not want. I am missing links to over 4K photos. Help would be appreciated!

I was referring to the catalog folders. LR creates folders for the catalogs,
and if you open one and right click the icon, it will provide an option to
open in LR. It was interesting in that the catalog was renamed and updated
according to LR 3. It may have been a catalog created by LR2 beta.
Nonetheless, I am resigned to the fact that I will not recover them. And as
I need raw photos from my previous photo files, I will import them. All of
the folders and photos I worked on are complete, and I might not have much
use for them anyway. Hopefully, new photos that I import will create
catalogs that will be a bit more reliable.
Thank you for your concern. I think I have resolved the issue in my mind,
but to any one reading this I would suggest that you backup the catalogs
every time LR3 makes the request to do so.

Similar Messages

Could not find any available Global Catalog in forest when running RemoteMailbox cmdlet

My current Exchange environment is a hybrid configuration of Office 365, Exchange 2013 hybrid, and Exchange 2007 on-premise.
I have a script responsible for enabling remote mailboxes and assigning O365 licenses to a list of users; essentially provisioning users an O365 mailbox. This script runs every hour through a defined scheduled task in the Task Scheduler.
The script is proven to work but will intermittently throw an error on some days: "Could not find any available Global Catalog in forest root.xyz.com"
Here are the nuances of the error when it does occur:
It will only throw the error when the script is run via scheduled task - the script will work fine if executed from the command line
The error occurs when "Enable-RemoteMailbox" or "Get-RemoteMailbox" is called.
The same error will occur with ANY script that calls "Enable-RemoteMailbox" or "Get-RemoteMailbox" and is ran via scheduled task - even when the RemoteMailbox cmdlet was the only line in the script
Here is the output and error when Get-RemoteMailbox -verbose is ran:
VERBOSE: [15:49:52.474 GMT] Get-RemoteMailbox : Active Directory session
settings for 'Get-RemoteMailbox' are: View Entire Forest: 'True',
VERBOSE: [15:49:52.489 GMT]
Get-RemoteMailbox : Runspace context: Executing
user: ,
Executing user organization: ,
Current organization: ,
RBAC-enabled:Disabled.
VERBOSE: [15:49:52.489 GMT] Get-RemoteMailbox : Beginning processing
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Current ScopeSet is: {
Recipient Read Scope: {{, }},
Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }},
Configuration Write Scope(s): {{, }, },
Exclusive Recipient Scope(s): {},
Exclusive Configuration Scope(s): {} }
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Resolved current organization: .
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Searching objects "abose" of type "ADUser" under the root "$null".
VERBOSE: [15:49:52.536 GMT] Get-RemoteMailbox : Previous operation run on global catalog server 'evw-xyzdc-p02.ad.xyz.com'.
Get-RemoteMailbox : Could not find any available Global Catalog in forest root.xyz.com.
At C:\IDM_In\Scripts\MinimalTest.ps1:42 char:14
+ $abose = Get-RemoteMailbox 'abose' -verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-RemoteMailbox], ADTransientException
+ FullyQualifiedErrorId : E421EF0B,Microsoft.Exchange.Management.RecipientTasks.GetRemoteMailbox
VERBOSE: [15:49:52.567 GMT] Get-RemoteMailbox : Ending processing
What could be the cause of this intermittent error?
Thanks for any help

looks to me permission error as when you are running it via a schedule task is is not able to call exchange shell/ commands {confirm this} where as when you running this manually looks to me you open exchange shell, may be as admin also and then running
the script.
schedule task process is not able to get the permission..
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

I see the message below but I can not find the other aplication : The Lightroom catalog named "lightroom Catolog" cannot be opened becouse another aplication has it opened.

I see the message below but I can not find the other aplication : The Lightroom catalog named "lightroom Catolog" cannot be opened becouse another aplication has it opened.

Have a look at this thread.
Trouble opening Lightroom 5

Could not find stored procedure 'sp_start_job'

I'm trying to run a ms sql server agent job from within my vb.net code using sp_start_job and getting exception...
Could not find stored procedure 'sp_start_job'.
... so obviously I'm doing something wrong. My vb code contains is ...
        jobCommand = New SqlCommand("sp_start_job", sqlConn)
        jobCommand.CommandType = CommandType.StoredProcedure
        jobParameter = New SqlParameter("@job_name", SqlDbType.VarChar)
        jobParameter.Direction = ParameterDirection.Input
        jobCommand.Parameters.Add(jobParameter)
        jobParameter.Value = "nameOfServerAgentJob"
        jobCommand.ExecuteNonQuery()
Can someone show me how to run the SQL Server Agent job properly from my vb code?
Thanks tonnes for any help, Roscoe

Or directly redirect the connection upon creation of the connection string to the right database, e.g.
string ConnectionString = "Data Source=YourServer;Initial Catalog=msdb;Integrated Security=True";
See more samples of connection strings here:
http://www.connectionstrings.com/sql-server/
-Jens
Jens K. Suessmeyer http://blogs.msdn.com/Jenss

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

Warning Messages - Could not find schema information for the element applicationSettings - App.Config of a console app

This is my app.config file
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
   <configSections>
   <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
   <section name="IntelBrandFX.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
   </sectionGroup>
   </configSections>
  <appSettings>
   <add key="connStr" value="Data Source=tmvnasql1.tmvn.com;Initial Catalog=brandplan;Integrated Security=True"/>
  </appSettings>
  <applicationSettings>
   <IntelBrandFX.Properties.Settings>
   <setting name="IntelBrandFX_rollupViewerService_extract" serializeAs="String">
   <value>https://viewer.rollup.com/omdsp2008/extract.asmx</value>
   </setting>
   </IntelBrandFX.Properties.Settings>
  </applicationSettings>
</configuration>
And the Warning messages are
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'IntelBrandFX.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
Message 4 Could not find schema information for the attribute 'name'.
Message 5 Could not find schema information for the attribute 'serializeAs'.
Message 6 Could not find schema information for the element 'value'.
Althought they do no hinder me from successfully running the project. these messages are annoying. I have seen many articles on the web but could nowhere find the exact schemas for that the above elements that I could add to the DotNetConfig.xsd file.
Could somebody give me an idea how to create xsds for the elements above and include in the dotnetConfig.xsd.
I understand what needs to be done but not sure of the exact way to do it.
Thanks,

You don't need to modify the dotnetconfig.xsd. All you need to do is generate an XSD for your section and let VS know where it is at.
1) Create your XSD using any of the various tools available or by hand.
2) Copy your XSD into the <VSDir>\Xml\Schemas directory.
3) Create a catalog file for your schema.
4) Restart VS and it'll load the XSD and give you Intellisense.
Here's the MSDN documentation for it: http://msdn.microsoft.com/en-us/library/ms255821.aspx
Michael Taylor - 8/18/09
http://p3net.mvps.org

PSE 12 organizer not opening catalog

First time opening organizer in PSE 12, just bought and installed.
On Windows 7. Previously had PSE 8. Told it to convert catalog, but every time it opens, it starts doing the face recognition process, and promptly crashes.
Have tried the first few solutions in this thread: http://forums.adobe.com/thread/1305821?tstart=0
Stopped at entry #6, as I could not find the folder they were describing. And I am not interesting in downloading sqlite.
Any solutions to offer now?

Ah, apparently you didn't read through what I said. I tried the first few solutions offered in the previous forum thread that I linked to -- this was one of them. I have that already turned off. When I go into manage catalogs and try to open the converted catalog, it opens it, promptly says it is Restoring People Recognition Data, and about 5% in, it crashes. Same exact point every time. I try to hit cancel to stop it; doesn't work. ALL Media Analysis is turned off. I've also got the Automatically Generate Thumbnails for Video Files turned off.
Next suggestion?
Could I load in from a backup catalog? I do have my catalog backed up fairly recently.

HT4414 I accidentally deleted garageband and I can not find the disks how to recover it?

I accidentally deleted garageband and I can not find the disks how to recover it?

Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

Upgrade issues from PSE8.0 to 11.0. will not convert catalog

I have been running PSE 8.0 for some time now with no issues and recently installed PSE 11. I have been trying for hours to bring my PSE8 catalog into 11 without success. I have run 'photoshoporganizer' as administrator and gone to manage catalog. The only catalog it shows is 'My Catalog 2' which has 13 media files (mp3 files as part of software)... it does not find my PSE 8 catalogue with 16,000 photos ! I have clicked on 'find more catalogs' and found my PSE 8 file which I have selected. I click on convert and am presented with a dialogue box saying 'conversion failed ..... try repairing with the software that created it etc' I have now run PSE 8 repaired it and it found no errors. tried again... failed. uninstalled PSE 11.. reinstalled PSE 11... repaired PSE catalog again (no errors !) .. tried to convert and failed ! now getting somewhat frustrated with what should be a simple task.. have I wasted my money on PSE 11. can anyone help ???
thanks

Try to take the backup of the catalog from PSE 8.0 and then restore the same catalog to PSE 11.0
Refer the below link for the entire process of backup and restore:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
-Harshit yadav

Installed BC InfoObject 'X' - Can not find it from RSA1, but from RSD1

Hi all,
    I have installed the Business Content InfoObject 0ME_REVO_PA. I could find this InfoObject from RSD1 and it is active. I could see it in Business Content section also with Active status, but I can not find it from RSA1 under InfoObjects section. I have to find under which InfoObject Catalog it has been created.
    What could be the problem, please ?
   Thanks in advance.
Regards.

Hi Bhanu,
   As per Edwin Harpino's suggestion, ran function module (se37) RSDG_IOBC_REORG
with following Import parameter :
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
   Now, I could see it in RSA1 also.
Thanks.

I can not find my photos

i can not find my photos

Images and folders are marked with "?" When they are not in the same folder location they were in originally when they were imported into Lightroom. This can happen when images are moved outside of Lightroom. When it happens, right-click on the image or the folder and choose to update the folder location. Then you will be able to indicate to Lightroom where the images have been moved to. If you cannot find those images at all anymore then it would seem that they have been deleted from the catalog and it will be necessary for you to import them again.
I apologize for the delay in answering. I have send you late last night just before shutting down my computer. And this morning I have been out with my camera.

Help: error: can not find the main class!

when I run the class, the following error message comes up:
java.lang.NoClassDefFoundError: j2sdk1/4/1
and also a dialogue window (title is "java virtual machine launcher") comes up: could not find the main class, program will exit! After I click ok button, another error message shows up: Exception in thread "main" .
Could anyone help me figure out what's wrong with my program? If you need any other informaiton, please email me: [email protected], Thanks a lot!!!

Hi, thank you very much for your reply. Here is the program:
import java.sql.*;
import java.io.*;
import java.util.*;
import java.lang.Object;
public class CatalogConnect{
Statement stmt, st, mast, ques;
ResultSet rset, orgset,maset, quesset;
String organization = null;
String sponsor = null;
String interMethod = null;
String year = null;
String collection = null;
String country = null;
String countryName = null;
String archNO = null;
String codeBook = null;
String td = null;
String todate = null;
String month = null;
int studyID, quesID, sponsorID, orgID;
public CatalogConnect(){
connect();
makeXMLFile();
public CatalogConnect(String codeBk){
codeBook = codeBk;
connect();
makeXMLFile();
public void connect(){
try{
// DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
// Class.forName(oracle.jdbc.driver.OracleDriver);
Connection conn =
DriverManager.getConnection ("jdbc:oracle:thin:@137.99.37.146:1521:ipoll",
"catalog", "catalog");
stmt = conn.createStatement ();
st = conn.createStatement ();
mast = conn.createStatement ();
Connection conn2 =
DriverManager.getConnection ("jdbc:oracle:thin:@137.99.36.171:1521:ipolljr2",
"catalog", "catalog");
ques = conn2.createStatement ();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
public static void main (String args[]){
CatalogConnect c = new CatalogConnect();
public void makeXMLFile() {
PrintWriter out = null;

AIO remote does not find my printer

I changed Internet providers a few months ago. I have not been able to print from my iPhone or iPad since then. AIO remote does not find my printer at all.

Hi,
Both AirPrint and the HP AIO Remote app relies on Multicasting, a such have to be supported and enabled by your router.
Some routers support a such by default, some require settings changes and some do not support Multicasting which required for a such.
Please clarify your router brand and model to better understand any possible steps to try.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error when deleting file: Could not find this item. This is no longer located in ...

We are setting up a new Windows 2012 server. Users access this server using a 'terminal services'. We have mapped some folders from a legacy server (different domain). Using group policy preferences, we map this folder as a drive for a user.
When user wants to delete some files, he get's the error: 'Could not find this item ..' The error is displayed to the user and it looks like the file can't be deleted. But when I press the F5 (refresh) button, the file is gone. My problem is very similar
to a problem in the following post: http://social.technet.microsoft.com/Forums/windowsserver/en-US/042e747a-0e25-4190-b0a2-82f3e9635eb0/can-not-delete-file-error-is-could-not-find-this-item?forum=w7itprogeneral
When I create 'txt' (or 'pdf', 'zip') file, i can delete it without the error. When I create 'xlsx', 'docx', 'pptx', 'bmp', 'jpg', I get the error.
Does somebody have an idea, how can I fix the cause of this problem? (I can't tell to users to hit the F5 button everytime when they face this issue)
Thank you for your help in advance!
Juraj

Hi,
Please check if the problematic files’ filename ended with a dot. If so, you could refer to the article below to troubleshoot the issue:
Solved: “Cannot read from the source file or disk”
http://blog.dotsmart.net/2008/06/12/solved-cannot-read-from-the-source-file-or-disk/
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Re:one or more project in the solution was not loaded correctly, Could not find a part of the path

Please I have been having problems loadig the adventuremultdime2012, I downloaded the visual studio 2013
but it is showing me this path
C:\Users\PC\AppData\Local\Temp\Temp5_AdventureWorks Multidimensional Models SQL Server 2012 (3).zip\AdventureWorks Multidimensional Models SQL Server 2012\Enterprise\AdventureWorksDW2012Multidimensional-EE\AdventureWorksDW2012Multidimensional-EE.dwproj :
error : Could not find a part of the path 'C:\Users\PC\AppData\Local\Temp\Temp5_AdventureWorks Multidimensional Models SQL Server 2012 (3).zip\AdventureWorks Multidimensional Models SQL Server 2012\Enterprise\AdventureWorksDW2012Multidimensional-EE\AdventureWorksDW2012Multidimensional-EE.dwproj'.
I guess its a hidden file or I have deleted it, because I cant find it too, any help please

Looks like you've either moved the file to somewhere else or it got deleted
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

LR 3.3 not finding catalogs

Similar Messages

Maybe you are looking for