LR 3 beta 2 "edit in" command not working.

ello,
I just upgraded from LR 2.6 to LR 3 beta 2. So far it's great...
But when I right click an image and select "edit in PS 4" and select "edit a copy with LR adjustments" LR creates a copy alongside the original, but doesn't open it in photoshop. The only way to get an image in photoshop is to export it, open it with Photoshop, then save and reimport it. It worked perfectly in LR 2.6- is there something easy i'm not doing?
I've also tried using photoshop as a secondary editing application, and it does the same thing.
I've just updated both camera raw to 5.7, and photoshop cs3 is version 11.1.
LR 2.6 still works without a problem.
Is there something i'm missing? Would uninstalling photoshop and reinstalling it help?
Thanks!
Any help would be great!
~Paul

Sorry, I did not get it before that PS opens but no image.
Well, LR 3.3 and CS3 are not fully compatible indofar as CS3 cannot open a RAW image that has been rendered with the new ACR of LR3.
It was still possible under LR 3.2 - I've done it nuemerous times, but was told on this forum that this was only due to a "bug" that had been "fixed" in LR 3.3.
I now have CS5 but still have CS3 installed.
When I try to open a RAW image from LR 3.3 with CS3 all what happens is that LR renders a TIFF (my specification for Additional External Editor) but CS3 does not open.
So, maybe you have to bite the bullet and upgrade to CS5.
Or, export your Raw Image as a psd and then open it from CS3.
WW

Similar Messages

Iphoto batch edit keyboard command not working

Using Lion 10.7 Iphoto 11 I find that the shift+cmd+B keyboard shortcut ( Batch Edit ) is no longer working on multiple or single photos.
Help from anyone pls....
Thx,

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Photo Edit in CS4 not working

Hello,
THE SETUP
I have LR 3.3 and PS CS 4 Version 11.0.2 on a Mac running OS X.6.7.
My "About Lightroom" screen reports the presence of Camera Raw 6.3.
In my LR preferences under "External Editing" tab, I have the option to "Edit in Adobe Photoshop CS4" as PSD / sRGB / 16 bit / rez 300. There is no "Additional External Editor" present.
I have installed in Library/Application Support/Adobe/Plug-Ins/CS4/File Formats the Camera Raw Plug-in version 5.7. When I choose Photoshop>About Plugin>Camera Raw I see that CR version 5.7.0.213 is present.
THE PROBLEM
When I select photo(s) [CR2 file(s)] in LR3 and choose Photo>Edit in> none of the external edit-in-Photoshop options work. First, I get a message saying "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.3 for full compatibility."
I resent this suggestion, since that version of Camera Raw only works with CS5.
When I click "Open Anyway," PS opens and loads, but that's it. None of the images from LR appear.
I get the same (non)-results with all of the options (edit in CS4, HDR, panorama, smart object, etc.) under "Photo>Edit In." Photoshop launches, but no image appears.
The only way I can get a photo to open in PS from within LR is to choose Photo>Edit in>Edit in Adobe Photoshop CS4, and then when the warning dialog comes up about the Camera Raw plug-in version, click "Render in Lightroom." When I do that, LR renders the image and it opens in CS4. But that doesn't help me do what I really want to do, which is to select bracketed exposures in LR, merge them to HDR in CS4, and save them back to LR.
I have searched for help on this and come up dry. I did find this http://www.lightroomforums.net/showthread.php?9974-Open-as-layers-in-Photoshop-command-not -working, but I reinstalled the CR 5.7 plug-in as described and saw no change.
Any suggestions appreciated. Thanks in advance.
Message was edited by: GeorgTrakl

Lr 3.3 and CS4 are not fully compatible so your experience is the result of that.
You will have to bite the bullet and upgrade to CS5 if you dont want to "Render in LR".
I've worked for quite a while with LR 3 and CS3 and experienced similar problems - the only way out is that you select "Render in LR".
It's not such a big deal. When you select "Render in LR", Lr creates the psd that then opens in CS4.
With CS5 it works this way: The RAW file opens in CS5 but when you save in CS5 a psd is generated.
WW

The "FIND" feature in the Edit menu does not work. I can't find anything on a webpage

The "FIND" feature in the Edit menu does not work. I cannot search a page. If I am looking for the word "Doctor" and I know it is on the page. All I get after typing the first letter is that the typing box turns red.
This is not fun.

Make sure that <b>[] "Match case"</b> on the Find bar (Ctrl+F) doesn't have a check-mark.

Alt ctrl c shortcut command not working in photoshop cc, it is opening Internet explorer (IE)

In Photoshop CC 2014 Alt + Ctrl + C ( to open for canvas size dialog box ) command not working, it is opening Internet Explorer (IE)

What version of windows are you using?
See if the Internet Explorer shortcut has that keyboard shortcut assigned to it.

Bash commands not working after upgrade to Lion

After upgrade, many BASH commands not working. For example, such a fundamental thing as "ls".
iMac20:bin a$ ls
Launch of "ls" failed: the PowerPC architecture is no longer supported.
What does it have to do with PowerPC? My computer is 2.66 GHz Inter Core Duo

Linc,
iMac20:~ a$ which ls
/sw/bin/ls
Also, I managed to look (using tcsh's ls-F command) into the contents of /usr/. Here's what I see there:
[iMac20:/bin] a% ls-F
[*          csh*        echo*       ksh*        mkdir*      rcp*        stty*       wait4path*
bash*       date*       ed*         launchctl* mv*         rm*         sync*       zsh*
cat*        dd*         expr*       link*       pax*        rmdir*      tcsh*
chmod*      df*         hostname*   ln*         ps*         sh*         test*
cp*         domainname* kill*       ls*         pwd*        sleep*      unlink*

FCP 7.0.3 ripple edit in timeline not working

FCP 7.0.3, AVCHD/proRes 422 LT, ripple edit in timeline not working. Using the ripple tool, I click on the edit point, drag the cursor to the clip and direction I want to trim but it doesn't work. pop-up says collision on V-1. Same thing when I double-click the clip to player and try to move the edit point on the scrub bar. This was functional in prior sessions. What's happening? Thx in advance.

I'm only using one (V1) track. Prior to this problem I was unable to insert edit. That problem mysteriously vanished after an unsuccessful phone support session w/ Apple failed to solve. Also when I try to insert w/transition (default cross-dissolve) the transition is applied to the opposite edit point,ie: out point of insert clip has transition instead of in point where it was applied. When I try to add transition to edit point (CMD-T) it doesn't work.
I'm slowly working around the ripple edit malfunction by using the razor tool and ripple delete (shift-delete) to trim in the timeline.

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
PERFORM bdc_field       USING 'BDC_OKCODE' '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'MAPL-MATNR(01)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

Odi os command not working with agentservice agent.

dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
Naseer

Hi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth

Crontab reboot command not working

Crontab reboot command not working
Greetings
I am new at this so excuse any ignorant mistakes I might be making.
I have a server (MM X.4.9) that I would like to restart every day in order to make sure no programmes are hanging etc. If a program is hanging is should force quit it. Using terminal I have entered the following command:
sudo nano /etc/crontab
Entered password
Than I entered using tab between each sequence:
15 13 1 1 * root reboot
This was a test run and it did not reboot.
Entering
cat /etc/crontab
I got:
# The periodic and atrun jobs have moved to launchd jobs
# See /System/Library/LaunchDaemons
# minute hour mday month wday who command
15 13 1 1 * root reboot
What have I done wrong?
Thanks

Hehe, there you are experimenting with a "reboot" cron command and you are surprised it quit so fast. You are not going to find a "graceful" solution to shutdown dialogs.
MSWord is a Java app, so it is especially important for the command to work that it doesn't get hung up on outer layers of the system. Especially stupid apps that use Java which is not well integrated. I believe Word has a 5 minute autosave, so you should be able to recover most of your document.
This reboot command should be running around 2AM, when the average webserver has minimum traffic. If you feel the need to reboot during busier times of the day, I'd suggest you look at what's causing your applications to crash.

Illustrator Short Commands Not Working

Hi Team,
My illustrator CS6 short commands have stopped working.
Any time I try to use any CMD + Key, illustrator will not react.
This has been on going for a few months, I have tried resetting preferences but nothing has changed.
If someone could please help.
Thanks,
Brandon

Hi Jacob,
I have tried resetting preferences and few other options.
Anytime I press the CMD key the option at the bottom just changes from selection to direct selection, if that helps.
Should I uninstall and reinstall illustrator?
I no longer have my access key.
Thanks,
Brandon
Date: Wed, 8 Jan 2014 15:39:58 -0800
From: [email protected]
To: [email protected]
Subject: Illustrator Short Commands Not Working
    Re: Illustrator Short Commands Not Working
    created by Jacob Bugge in Illustrator - View the full discussion
THS,
You may try the following (you have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5994475#5994475
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5994475#5994475
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5994475#5994475. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why does default keyboard shortcut for show/hide baseline grid (opt+command+') not work?

Why does default keyboard shortcut for show/hide baseline grid (opt+command+') not work?

Here's where you need to change the settings: System Preferences > Keyboard > Keyboard Shortcuts:

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac? No

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac?
Marquees not showing, works perfectly fine on PC IE 9.
Can edit text put cannot duplicate regions?
Can anyone advise? Not good if the client worjs on Mac.

Marquees the HTML tag? It's the most hated HTML tag out there, most browsers removed it because it was such a pain to see in 1996 scrolling images and scrolling everything

Need help getting rid of Trovi virus on Safari and Chrome. Cannot use the instructions Apple sent because the copy command under the edit tab does not work.

I use OS X 10.9.5. I have a trovi virus on Safari and Chrome. Yesterday I thought I had gotten rid of Trovi, but it's back on both my search engines. The directions Apple sent yesterday do not work; the copy function under the edit tab is grayed out and non-responsive. Can anyone help me to get rid of this virus? Thanks.

Are you referring to these instructions?
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
If so, be sure to read the instructions carefully, and note that you will need to repeat the numbered steps in the Conduit/Trovi/SearchProtect removal instructions for each line shown, not all together.
If those instructions aren't working for you, for whatever reason, try my Adware Removal Guide. It provides similar instructions, worded differently, as well as an app (AdwareMedic) that can help you do the removal automatically.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

LR 3 beta 2 "edit in" command not working.

Similar Messages

Maybe you are looking for