LR 4.1 installed through AAM, How do I upgrade to 4.2?

This may seem like a stupid question, but I want to reduce the possibility of screwing up my current Creative Cloud installs.
Background
I have a Creative Cloud membership w/ several applications installed through AAM. All show as "installed" as I'd expect and seem to function just fine.
AAM Application Updating
Some applications automatically install updates through the AAM -- that is, they update automatically. For example just today PS CS6 and Premier Pro CS6 updated via the AAM update process, first notifying me via the AAM icon that there was an update, then allowing me to choose to go ahead with it -- all through AAM.
BUT, Lightroom doesn't seem to do this. I was notified of an update to Lightroom (4.2) when I opened the application.
The notification indicated I should download and install it.
My Questions
Should I go ahead and uninstall LR4.1, then reinstall LR from AAM? (this assumes AAM is now updated to install LR4.2 vs. LR4.1)
-- Or --
Should I run the LR4.2 download over my existing AAM installed LR4.1? (seems like this isn't usually a good idea)
-- Or --
Should I uninstall LR4.1, then install LR4.2 via the downloaded updater? (seems this might cause trouble w/ AAM showing that LR is not "installed")
I've got a recently setup machine and have everything working as desired, so I'd prefer not to have to revert or clean up something caused by my not taking the appropriate updating path. I've done several searches both via Google and here and found nothing noting the difference between LR and other AAM installed apps for updates -- so I'm left puzzling what I should be doing for this upgrade to LR4.2...
Any assistance would be most appreciated.
Thanks!
-Bonnie

Some additional info relating to my 4.1 to 4.2 upgrade and LR CC (Creative Cloud) installs as a whole is here:
http://forums.adobe.com/message/4782301#4782301
So far I'm hoping that I'll be able to remove the 4.1 version without negative impact on 4.2 which is now installed in a non-default directory.
The overall upgrade process does not mirror that for other CC apps. Instead it follows its own path.
Check the link above for more info.
Cheers,
-Bonnie

Similar Messages

Edge Animate wont install through AAM on OSX

I received the following error:
I uninstalled the previous version, restarted my computer, but I still get the same error. Any ideas?
Drei

Go thru the steps listed at:
http://forums.adobe.com/message/4361731#4361731?promoid=KBHJP

How do i upgrade from os x 10.5.8 leopard to the newest software?

I would like to get the newest software for my macbook. I run system os x 10.5.8 (leopard i guess).
Thanks for answering!
My problem is: i dont have the app store installed. So how can i upgrade?!

You can purchase Snow Leopard from the Apple Store ( and numerous resellers). It costs about $30, plus state taxes.
10.6.6 up to 10.6.8 will install the "App Store" where you can purchase and download "Lion" (10.7).
Make sure your machine meets the Lion install requirements before you buy.

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshoo

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

Excel 2013 installed through 365 crashes when small row is in spreadsheet

Hi,
I have major issue with Excel files that makes Excel stop working when trying to print.
Excel crashes already at the preview pane and it has nothing todo with print driver, it crashes if using the XPS driver as well.
Using Excel installed locally through 365 (All patches applied)
By searching for formatting error in the spread sheet I found out that there were a couple of rows that had very small height and removing those (or increasing them) made Excel not crashing when trying to print.
This excel file is actually working on other installations of Exel 2013 but it seemes to only cause problems on the Excel 2013 installed through 365.
When I found the problem and that it seemes only to be on the 365 Excel I also found another user with same problem but no solution. (community.office365.com/en-us/forums/172/t/168863.aspx)
In my case I have several hundred Excel files and most of them are password protected which makes it impossible to fix the rows manually.
It is not a problem on traditional installed Excel 2013 or earlier versions... So I would say it is a bug with the 365 version of Excel.
Anyone out there with a solution or how to report this to Microsoft?

I would escalate the issue and someone who is more familiar with this kind of issue to deal with this problem.
Thank you for your feedback.
Tony Chen
TechNet Community Support

I have a Leopard DL disk & bought an external CD drive, but I read that I can't install through USB?

I also have a Leopard DL disk and having the same problem with my eMac. I bought an external CD drive, but I read that I can't install through USB. Why is that? Would a USB A female to FireWire IEEE 1394 6P converter work? Or do I have to buy another CD drive with a FireWire? Please help.
PS
Can you also please explain how to boot from an external drive? (CD drive and storage device). Is there even a way to save the disks content to an external memory device and install it from there?
Message was edited by: Edz2
<Re-Titled By Host>

Hi,
Very few PPC Macs can boot from USB, most require Firewire... BUT, all 3 of my eMacs can & do boot from USB, try holding the alt or option key at bootup.
A USB<->FW converter will not work.

Apps installed through App Store keep updating

Good Morning there,
I have three apps installed through the App Store: Xcode, iMovie and Microsoft Remote Desktop.
Every time I turn my mac on, they show the same update again and again, regardless how many time I installed the update. Even worse, when I remove iMovie or Remote Desktop, the application is reinstalled and the the same update is proposed again and again and again ...
How can I troubleshoot this?
Jean

That would make sense - I had disabled Spotlight as it interfered with my building of a few ports. I turned it back on and we will see.
Thank you for the pointer.
J.

I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

I have a macbook pro 10.5.8 how to I upgrade it to a 10.6.3? Do I install snow leopard?, I have a macbook pro 10.5.8 how to I upgrade it to a 10.6.3? Do I install snow leopard?

How do I upgrade my macbook pro 10.5.8 to a 10.6.3? Do I install snow leopard, if so which one and is this difficult? thanks kind of a newbie at doing this kind of stuff on my mac.

Buy a Snow Leopard installer DVD at an Apple store or reseller and follow the instructions that will come with it.

Can anyone help me pls. , I deleted an app on my Ipod Touch, and It was deleted but when I connected my device on my computer and went to iTune "apps" , I saw the app I deleted and it says "install" . Guys, how will I delete it permanently? Pls help me.

Can anyone help me pls. , I deleted an app on my Ipod Touch, and It was deleted but when I connected my device on my computer and went to iTunes>"apps" , I still saw the app I deleted and it says "install" . Guys, how will I delete it permanently? May you Pls help me. Thanks

Just don't click install

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

To replace your phone's screen costs $109US and I don't see why having Apple replace the screen would void your warranty.
http://www.apple.com/support/iphone/repair/screen-damage/

When going through photos how can i see if they are in an album

when going through photos how can i see if they are in an album

~Not quite the same but you can find all the images that are not in an album (or vice versa) with a Smart Album.
File -> New Smart Album
Album -> is not -> Any

I'm trying to install an update to itunes that downloaded but can't complete installation as its trying to install onto D: drive. I don't have a D drive and i'm not given option of selecting the drive to install on. How can i select the drive that i want

I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad?

How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?

Thank you!
Disabling firewall and AV did the trick!
Kudos.
Alex

Applications Installed through task sequence not showing up in Software Center

In the task sequence we use for our OSD Windows 7 machine build, we have Custom-Install Application steps which install a number of of our Applications. Each of these Applications has the "Allow this application to be installed from the Install
Application task sequence action without being deployed" checkbox checked. All of the Applications have the following properties set:
Installation behavior: Install for system
Logon requirement: Whether or not a user is logged in
Installation program visibility: Hidden
When a machine is built using this task sequence, all of the Applications install successfully - they show up in Control Panel\Programs and Features, and they run correctly. However, none of them show up in the Software Center. I'm not seeing anything in
any of the logs that indicates a problem, and the Software Center remains empty even after running all the client evaluation cycle actions
Interestingly, if I add a couple of the newly build machines to a collection, then target deployments for the already installed Applications to that collection, after running the Machine Policy Retrieval and Evaluation Cycle the Applications immediately
show up in Software Center as installed.
Does anyone know if Applications installed through a task sequence do not show up in the Software Center by default, or could you give me some troubleshooting tips if this is not normal?
Thanks for any suggestions!
SCCM 2012 SP1, Single site, W7 clients

Why you deploy applications through task sequences? Task sequences are built and meant to be used with OSD, not application deployment.
To my knowledge, if you have application install step in a task sequence and you deploy that task sequence to a collection of machines, the software center on those machines only sees the task sequence itself, not the applications inside the task sequence.
If you want your applications to be shown in the software center, change the method of deploying stuff and deploy applications as they're are meant to.

LR 4.1 installed through AAM, How do I upgrade to 4.2?

Similar Messages

Maybe you are looking for