LR 4.2 not recognizing Canon 5D MK III files

I have LR 4.2 installed. I just tried to import my 5D MK III images for the first time and is gave me a camera not recognized (409) error. From what I can see the 5 MK III was supposed to be supported from 4.1 on. Did the tether fix in 4.2 break the native image support? If not, does anyone have 4.2 installed that does recognize MK III files (within the past week)? I ran the update check and it reported that I had the latest version installed and no updates were available.
Thanks

Lightroom 4.2 should have no problems recognising and importing Canon 5DMk3 files. Actually, I imported around 200 such files late last night. So, there is something else going on with your installation. Have you tried deleting the Lr preference file ? More info where it's located can be found at http://forums.adobe.com/thread/358041?tstart=0

Similar Messages

  • Aperture not recognizing Canon G-10 RAW Files?

    All of a sudden Aperture is not recognizing my G-10 RAW files. It did yesterday, but not today. I just downloaded the new aperture update thinking that might change things, but no go. Just says "unsupported file format"
    Any suggestions?
    Thanks, Shane

    What is your import workflow? Are you (appropriately) uploading images first to the hard drive before importing into Aperture? Was the card (appropriately) reformatted in-camera before shooting the new batch of pix?
    Direct camera-to-Aperture or card-to-Aperture workflows can be problematic, as can using the computer for erasing card images or reformatting cards.
    -Allen Wicks

  • CS6/ACR 7.x not recognizing Canon 5d Mark 3 files previously edited in same version. Help?

    Why are my previously edited canon 5d mark 3 raw xmp files no longer recognized and all sliders set to zero? I can see the xmp files associated with the raw file in their folder. The files were originally edited in CS6/ACR 7.x -in July 2012 - and recently re-opened in the same CS6/ACR 7.x.
    The canon 5d mark 2 files from the same time/event are showing up fine. I have updated everything, but both before and after the update, same issue with the Mark 3 files.
    On a side note:
    We have found that opening mark 2 files (that were originally edited in CS4 / ACR 5.7) in CS 6 / ACR 7.x and making any changes such as color coding causes all previous xmp information being zero'd out in the mark 2 xmp file. Not sure if this is a symptom of the same problem? Except the difference here is the Mark 3 files have never been touched outside of version CS6/ACR7.x - however the folder which holds both mark 2 & mark 3 files from the same event has been opened in the CS4 / ACR 5.7 window but without touching the files. By opening the folder in CS4 I can see that the Mark 3 files aren't reading and then know this event was originally edited in CS6/ACR 7.x
    Specifics:
    PS CS6 13.0.4 x64
    Mac OSX 10.6.8
    Canon 5d Mark 3 Raw files
    This is the first time in these circumsances that this issue has presented itself.
    Any insight would be much appreciated
    Thank you!

    First check to make sure your view mode in ACR is set to Image Settings, not Camera Raw Defaults.  This is accessible as the top item or three in the menu that comes up when you click the little threelines-arrow icon at the right of the tabs title bar, for example to the right of the word Basic.
    Otherwise, did you switch your Camera Raw settings location to be the central database instead of XMP files and/or are you on a different computer that might have a different metadata storage location?
    Open up one of the XMP files in a text editor, perhaps one that hasn’t had a picture opened for it, recently, yet, and see if you see any non-zero settings.  Also take note of the last file creation time.  This will help determine if the XMP files, themselves, have been written with ACR defaults or if they are just being ignored.
    Also, check the date and timestamps of a CR2 and XMP file that hasn’t been opened, recently, and see if the XMP date/time is before the CR2 date/time.  There has been a bug, not sure in LR or PS, where if the XMP file date is BEFORE the raw-file date, then the XMP is ignored so maybe that could be happening.  If it is a LR bug, then have the files been edited in LR, which might have ignored the XMP files and the rewritten things with the LR default settings?
    If no explanation can be found on your side, can you zip up a raw and its corresponding XMP, preferably one that’s not been looked at, recently, then put them online somewhere like http://www.dropbox.com/ and reply with the public download link, so others can take a look?
    What version of Camera Raw are you using?  ACXR 7.4 just came out this week.

  • CS-4 will not open Canon 5D Mark III Raw. Is there a fix?

    CS-4 will not open Canon 5D Mark III Raw. Is there a fix?

    You would need CS5 or 6 to open raw image.
    Your only option is to upgrade to CS6 or convert images to DNG.
    If you choose DNG download the free latest version.

  • Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III  files. SNo support or upgrade availab

    Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III  files. SNo support or upgrade available on the site but 6.7 upgrade.!Please advise

    http://labs.adobe.com/technologies/cameraraw7-1/

  • Aperture & Lion not recognizing Canon 1D Mark IV videos

    Upgraded the 17" MBP i7 to Lion.
    When I import 1D Mark IV photos and videos from a CF card, it takes forever if there are videos on the card. It's fine if there's not. And when the videos come in to Aperture, they're not recognized as video files (even though they're .MOV files). Quicktime Player plays them fine.
    Did 10.7 nuke something from Canon that I have to re-install?

    The issue seems to be that /Library/Quicktime had a lot of outdated Quicktime stuff. I noticed QT is now mostly in /System/Library/Quicktime, so I deleted everything in /Library/Quicktime and now it seems to work.

  • MBA 11" not recognizing Canon camera

    My Canon S95 camera is recognized normally on my home iMac and iPhoto opens. However, I am now traveling in Europe with my new MacBook Air 11" and find that camera is not recognized and does not appear on USB device list under Sys Profiler. Have tried resetting SMC and NVPR.
    No other problems with camera or MBA.

    Lightwave wrote:
    My Canon S95 camera is recognized normally on my home iMac and iPhoto opens. However, I am now traveling in Europe with my new MacBook Air 11" and find that camera is not recognized and does not appear on USB device list under Sys Profiler. Have tried resetting SMC and NVPR.
    I have no problem with my S95 and 11" MBA. Could the problem be with the camera's memory card (I use sandisk)?

  • Premiere Pro CS3 not recognizing Canon devices for capture

    I have used Premiere elements 2.0, no problem.  Now with CS3 in the capture video panel it says "device offline".  I can capture using windows movie maker, not sure why not my Canon GL2 or my XL2 for that matter, I've tried them both.  I am using windows xp.

    First, does XP recognize the camera(s), when attached by IEEE1394 and turned on? If yes, we'll get to that. If no, then you likely have a problem with either your IEEE1394 controller, XP, or with the camera(s). With it plugged in and turned on, go to Control Panel>System>Device Manager and see if it appears there, and if there are error messages.
    If your XP does recognize the camera, you might try these little "tricks" gathered by Jim Simon:
    1.) Plug in the camera, but do not turn it on. Launch PrPro and choose Capture. Turn on camera.
    2.) Plug in the camera, but do not turn it on. Launch PrPro, but do not choose Capture yet. Now, turn on camera and then choose Capture.
    3.) Plug in the camera, and turn it on. Launch PrPro and choose Capture.
    4.) Any other variations of these that you can think of.
    It seems that different cameras behave differently, so you may have to experiment to see if one proceedure works for you.
    If none of this works, and XP sees the camera(s) correctly, then I am out of ideas.
    Good luck,
    Hunt

  • Camera Raw 7 does not recognize Canon 5D Mark III RAW files

    Hello,
    I have Adobe Creative Cloud installed and I use Adobe Photoshop CS6 with Camera Raw 7. Photoshop nur Bridge CS6 do not recognize the RAW files from the Canon 5D Mark III, though it says on the Adobe support site that the camera is supported since Camera Raw 6.7
    When I try to open the .cr2-File I get the message "Photoshop cannot open the file".
    I use Win7 (64 Bit).
    Any help?
    Thanks in advance,
    Robert

    Hi Robert,
    Its a known issue as the PS CS 6 was launched with ACR 7 however the support in Photoshop CS 6 would come with ACR 7.1 update which will be live soon.
    You are completely right in saying that Canon 5D Mark III was supported in ACR 6.7 but it was only intended for >PS CS 5 & 5.1.
    In the meanwhile if you want you can download the RC version of ACR 7.1 from labs.adobe.com.
    Thanks
    Mandhir

  • "Preview not available" for raw Canon 5d Mark III files

    Please help.  I can't seem to get my mac to import my raw files from the first wedding I shot last weekend with my Mark III. All my jpgs are fine, just can't seem to import the raw. I've downloaded the 4.1 update and still the same issue.

    Canon 5d Mark III is not supported as of now by Adobe Camera Raw
    Check this for suppoted list of cameras : http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    --Baljeet

  • I upgraded to PSE 13 so I could edit RAW files from my Sony a6000 but PSE 13 is not recognizing any of the RAW files. My Sony a6000 is on the Camera Raw list and uses version 8.4. PSE 13 uses Version 8.6. Why isn't it recognizing the files?.

    Why isn't PSE13 recognizing my Sony a6000 RAW files?

    Not sure if upgrading to 8.7 would make any difference.  Photoshop has 8.7 so worth a try:
    I don't use PSE13 yet so don't know if this upgrade is available for it.

  • "Image not recognized" on img or dmg files...

    Hello all...
    Anyone had the same problem? I have just updated to OS Maverick and I tried to install a firmware for my external RAID. Downloaded from the official website but no luck. I get an error message "Image not recognized". Tried to open it with stuffit or RAR expander but same problem...
    Any advice?
    Thanks s lot...

    Possible solutions:
    Download the file again.
    Check if the file size matches what it says on the website. If the size is way off, then don't try to install it.
    If the source website provides it, verify the checksum of the file. Google "mac verify checksum of a file".

  • Adobe Media Encoder 2.5 Not Recognizing Canon XH-A1

    I have not been able to get the Canon XH-A1 to be recognized by the Adobe Flash Media Encoder v2.5. Get size error and sometimes configuration errors. Trying to do live stream with HD. Get error also stating the video size from the device is wrong size error.
    I get this on both XP and Vista
    Any ideas of how to get this beast to connect live through the encoder or is there another solution for live stream to the media server 3?
    Thank you
    Bill

    Is this using Adobe Content Server?
    Aandi Inston

  • Lightroom 5 not recognizing canon or sony raw.

    I recently upgraded to Lightroom 5.   Suddenly it will not recognize raw files from either my Canon 7D, or my Sony Nex-7.
    Both of these are supported in LR4, and LR4 is still recognizing them.
    Any suggestions?  I've already checked, there are no further updates available.

    Do you mean that Lr 5 won't import new raw files for these camera models? 
    Or, that it won't read existing raw files for these camera models that are in your catalog already?

  • IMovie 08 not recognizing Canon Vixia HF100

    I have had my canon Vixia hf100 for over a year and purchased iLife 08 (with iMovie 08) last year and had no problems with uploading my videos at first.
    However, I am no longer able transfer my videos from my camcorder into imovie 08. It will not recognize the camera, and any time I try to do a manual transfer of the files, it tells me they are not movie files. Why would imovie STOP recognizing my camera that it used to recognize? I'm wondering if something changed with one of my software updates that changed imovie and somehow made it incompatible. I would rather not purchase imovie 09. Any insight would be appreciated.

    Sorry I didnt mean to offend with simplicity, but unless you do the right (silly as it may seem) sequence it doesn't recognize the Canon! One thing done out of order and you must start over again! I did leave one step out, sorry! When the camera is turned on, you will get a camera screen to select the "play mode". Use the joystick on LCD display panel to select PC mode and depress select button.
    iMovie '08 then detects and lets you download all clips from the camera.
    Tip: You must use the Movie folder in your user "parental guidance" ok'd user area. No other folder works!
    And I do have all apple software updates on that computer. If this still doesn't solve your problem, I purchased Leopard by DVD from Apple and upgraded Tiger. However my new Leopard native computer did not have iMovie '08, still don't know why! So my success has been on the computer using the Leopard DVD upgrade! Perhaps the system upgrade and the native Leopard misses the boat, which would cause your continued problem.
    Sincerely trying to help!
    Jim...

Maybe you are looking for